All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	891 views	2 answers	The diameter of main bars in R.C.C. columns, shall not be less than updated 10 years ago by Civil Engineer
0 votes	1013 views	1 answer	In a simply supported slab, alternate bars are curtailed at updated 10 years ago by Civil Engineer
0 votes	876 views	2 answers	[RESOLVED] The maximum permissible size of aggregates to be used in casting the ribs of a slab, is updated 10 years ago by Civil Engineer
0 votes	860 views	1 answer	The Young's modulus of elasticity of steel, is updated 10 years ago by Civil Engineer
0 votes	853 views	1 answer	The design of heel slab of a retaining wall, is based on the maximum bending moment due to: updated 10 years ago by Civil Engineer
0 votes	869 views	2 answers	In a cantilever retaining wall without a heel slab updated 10 years ago by Civil Engineer
0 votes	862 views	2 answers	According to load factor method, the permissible load W on a short column reinforced with longitudinal bars and lateral stirrups, is updated 10 years ago by Civil Engineer
0 votes	2219 views	3 answers	The zone in which transverse bending is likely to occur may be obtained by drawing a line from the faces of the column making an angle θ° with horizontal where θ° is updated 10 years ago by Civil Engineer
0 votes	1988 views	3 answers	The weight of reinforced concrete, is generally taken as updated 10 years ago by Civil Engineer
0 votes	1518 views	2 answers	A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is updated 10 years ago by Civil Engineer