All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	958 views	2 answers	The diameter of main bars in R.C.C. columns, shall not be less than updated 11 years ago by Civil Engineer
0 votes	1093 views	1 answer	In a simply supported slab, alternate bars are curtailed at updated 11 years ago by Civil Engineer
0 votes	937 views	2 answers	[RESOLVED] The maximum permissible size of aggregates to be used in casting the ribs of a slab, is updated 11 years ago by Civil Engineer
0 votes	935 views	1 answer	The Young's modulus of elasticity of steel, is updated 11 years ago by Civil Engineer
0 votes	925 views	1 answer	The design of heel slab of a retaining wall, is based on the maximum bending moment due to: updated 11 years ago by Civil Engineer
0 votes	935 views	2 answers	In a cantilever retaining wall without a heel slab updated 11 years ago by Civil Engineer
0 votes	932 views	2 answers	According to load factor method, the permissible load W on a short column reinforced with longitudinal bars and lateral stirrups, is updated 11 years ago by Civil Engineer
0 votes	2307 views	3 answers	The zone in which transverse bending is likely to occur may be obtained by drawing a line from the faces of the column making an angle θ° with horizontal where θ° is updated 11 years ago by Civil Engineer
0 votes	2062 views	3 answers	The weight of reinforced concrete, is generally taken as updated 11 years ago by Civil Engineer
0 votes	1593 views	2 answers	A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is updated 11 years ago by Civil Engineer