All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	897 views	2 answers	The pitch of the main bars in a simply supported slab, should not exceed its effective depth by updated 10 years ago by Civil Engineer
0 votes	1029 views	3 answers	An R.C.C. lintel is spanning an opening of 2 m span in a brick wall. The height of the roof is 2.9 m above the floor level and that of the opening is 2.1 m above the floor level. The lintel is to be designed for self weight plus updated 10 years ago by Civil Engineer
0 votes	1301 views	2 answers	As per IS : 456, the reinforcement in a column should not be less than updated 10 years ago by Civil Engineer
0 votes	1029 views	2 answers	On an absolutely rigid foundation base, the pressure will updated 10 years ago by Civil Engineer
0 votes	974 views	1 answer	A pre-cast pile generally used, is updated 10 years ago by Civil Engineer
0 votes	870 views	1 answer	In a singly reinforced beam updated 10 years ago by Civil Engineer
0 votes	860 views	3 answers	In the zone of R.C.C. beam where shear stress is less than 5 kg/cm2, nominal reinforcement is provided at a pitch of updated 10 years ago by Civil Engineer
0 votes	886 views	1 answer	For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to updated 10 years ago by Civil Engineer
0 votes	850 views	2 answers	The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of updated 10 years ago by Civil Engineer
0 votes	888 views	1 answer	The breadth of a ribbed slab containing two bars must be between updated 10 years ago by Civil Engineer