All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	1238 views	2 answers	What is the maximum number of passenger cars that can pass a given point on a lane or roadway during one hour under ideal roadway and traffic conditions, known as ? updated 9 years ago by Civil Engineer
0 votes	1252 views	2 answers	What is the appropriate field test to determine the in-situ undrained shear strength of a soft clay ? updated 9 years ago by Civil Engineer
0 votes	1331 views	7 answers	A steel rod, 100 mm long is held between two rigid supports. It is heated by 20°C. If the coefficient of thermal expansion of the material of the rod is 15 x 10-6 /° C and modulus of elasticity is 200 x 103 MN/m2, what is the stress in the rod ? updated 9 years ago by Civil Engineer
0 votes	1484 views	2 answers	Dolphin is a type of which one of the following ? updated 9 years ago by Civil Engineer
0 votes	1392 views	2 answers	In a BG railway track, the specified ruling graident is 1 in 250. The horizontal curve of 3° on a gradient of 1 in 250 will have the permissible compensated gradient of updated 9 years ago by Civil Engineer
0 votes	2493 views	5 answers	Bottom-dump wagons are suitable for handling which of the following ? updated 9 years ago by Civil Engineer
0 votes	1541 views	3 answers	A symmetric parabolic arch of span 12m and rise 4 m has hinges at springings and at the crown. What is the influence line ordinate at the location 3m from one lower hinge ? updated 9 years ago by Civil Engineer
0 votes	1537 views	3 answers	A column base is subjected to moment. If the intensity of bearing pressure due to axial load is equal to stress due to the moment, then the bearing pressure between the base and the concrete is updated 9 years ago by Civil Engineer
0 votes	1490 views	2 answers	Which is the best sewer material to resist hydrogen sulphide corrosion ? updated 9 years ago by Civil Engineer
0 votes	1421 views	1 answer	A train is hauled by 2-8-2 locomotive with 22.5 tonnes load on each driving axle. Assuming the coefficient of rail-wheel friction to be 0.25, what would be the hauling capacity of the locomotive ? updated 9 years ago by Civil Engineer