All Questions

• Newest
• Hottest
• Most votes
• Most views

1 vote	1379 views	1 answer	The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in updated 10 years ago by Civil Engineer
1 vote	1284 views	1 answer	In horizontal angles, the error due to imperfect levelling of the plate bubble is updated 10 years ago by Civil Engineer
1 vote	1688 views	2 answers	The slope correction for a 3° slope for a length of 100 m, is updated 10 years ago by Civil Engineer
1 vote	1288 views	1 answer	The curvature of the earth's surface, is taken into account only if the extent of survey is more than updated 10 years ago by Civil Engineer
1 vote	1459 views	1 answer	The area of any irregular figure of the plotted map is measured with updated 10 years ago by Civil Engineer
1 vote	1293 views	2 answers	The angle of intersection of a contour and a ridge line, is updated 10 years ago by Civil Engineer
1 vote	1294 views	1 answer	The sag of 50 m tape weighing 4 kg under 5 kg tension is roughly updated 10 years ago by Civil Engineer
1 vote	1299 views	1 answer	If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on updated 10 years ago by Civil Engineer
1 vote	1401 views	1 answer	While surveying a plot of land by plane tabling, the field observations updated 10 years ago by Civil Engineer
1 vote	1286 views	1 answer	Diaphragm of a surveying telescope is held inside updated 10 years ago by Civil Engineer