All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	1370 views	2 answers	Which type of brick masonry bond is provided for heavy loads on masonry ? updated 10 years ago by Civil Engineer
0 votes	1638 views	3 answers	In a three-layered soil, water flows parallel to stratification. The thickness of the middle layer is twice that of top and bottom layer. The coefficient of permeability of middle layer (2K) is twice that of top and bottom layer (K). What is the average coefficient of permeability for this flow ? updated 10 years ago by Civil Engineer
0 votes	1332 views	3 answers	The slenderness ratio of lacing bars should not exceed : updated 10 years ago by Civil Engineer
0 votes	3939 views	7 answers	Budgeting with Bar chart is a tool to find updated 10 years ago by Civil Engineer
0 votes	1325 views	4 answers	The bearing capacity factors Nc, Nq and Nr are functions of: updated 10 years ago by Civil Engineer
0 votes	1291 views	6 answers	Viewing watershed as a system, which one of the following assumptions is made in the unit graph theory ? updated 10 years ago by Civil Engineer
0 votes	2071 views	7 answers	A point load applied at shear centre induces updated 10 years ago by Civil Engineer
0 votes	1518 views	2 answers	In a simply supported wooden beam under uniformly distributed load, a hole has to be made in the breadthwise direction at mid-span to provide a pipeline. From structural strength point of view, it would be advisable to have the hole made at updated 10 years ago by Civil Engineer
0 votes	1541 views	5 answers	A constant angle arch dam when compared to a constant radius arch dam utilizes concrete quantity of about updated 10 years ago by Civil Engineer
0 votes	1948 views	3 answers	The length, coefficient of thermal expansion and Young's modulus of bar 'A' are twice that of bar 'B'. If the temperature of both bars is increased by the same amount while preventing any expansion, then the ratio of stress developed in bar A to that in bar B will be updated 10 years ago by Civil Engineer