All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	2817 views	2 answers	A CST-9 sleeper consists of updated 11 years ago by Civil Engineer
0 votes	1147 views	3 answers	If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is updated 11 years ago by Civil Engineer
0 votes	1349 views	10 answers	Mr. W. Simms, the consulting Engineer to the Government of India recommended the gauge for Indian railways updated 11 years ago by Civil Engineer
0 votes	1327 views	2 answers	To hold hydraulic jumps, baffle walls are provided in updated 11 years ago by Civil Engineer
0 votes	1225 views	2 answers	The most suitable section of a lined canal, is updated 11 years ago by Civil Engineer
0 votes	1327 views	2 answers	The ratio of the rate of change of discharge of an outlet to the rate of change in level of water surface in a distributary at its normal depth, is known as updated 11 years ago by Civil Engineer
0 votes	981 views	2 answers	While deciding the alignment of a proposed canal taking off from a river at B, three alignments of approximately equal lengths are available. These cross a drainages at C1, C2 and C3 where drainage bed levels C1 > C2 > C3, you will provide at site C3 updated 11 years ago by Civil Engineer
0 votes	983 views	2 answers	For cereal crops the most commonly adopted method of irrigation, is updated 11 years ago by Civil Engineer
0 votes	984 views	1 answer	Process of meandering is due to updated 11 years ago by Civil Engineer
0 votes	939 views	2 answers	According to Lacey, in regime conditions updated 11 years ago by Civil Engineer