All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	1310 views	4 answers	A steel bar 5 m x 50 mm is loaded with 250, 000 N. If the modulus of elasticity of the material is 0.2 MN/mm2 and Poisson's ratio is 0.25, the change in the volume of the bar is : updated 9 years ago by Civil Engineer
0 votes	1062 views	1 answer	At yield point of a test piece, the material updated 9 years ago by Civil Engineer
0 votes	997 views	2 answers	A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is updated 9 years ago by Civil Engineer
0 votes	873 views	2 answers	The forces in the members of simple trusses, may be analysed by updated 9 years ago by Civil Engineer
0 votes	893 views	2 answers	A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 x 106 N/mm2, the depth of the joist, is updated 9 years ago by Civil Engineer
0 votes	2448 views	3 answers	A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 x 106 N/mm2, the deflection of the free end, is updated 9 years ago by Civil Engineer
0 votes	874 views	5 answers	Flat spiral springs updated 9 years ago by Civil Engineer
0 votes	1040 views	2 answers	A three hinged arch is generally hinged at its supports and updated 9 years ago by Civil Engineer
0 votes	1144 views	3 answers	The greatest load which a spring can carry without getting permanently distorted, is called updated 9 years ago by Civil Engineer
0 votes	979 views	2 answers	The ratio of shear stress and shear strain of an elastic material, is updated 9 years ago by Civil Engineer