All Questions

0
votes
1698
views
2
answers
The 'Euler' load for a column is 1000 kN and crushing load is 1500 kN. The 'Rankine' load is equal to
updated 9 years ago by Civil Engineer
0
votes
1823
views
1
answer
A bulldozer operates on a 30 m stretch and moves at 2.4 kmph when pushing the earth, and returns empty at 6 kmph. The time lost in loading and shifting gears per trip is 18 seconds. Its operating factor is nearly 50 min/hour. What is the number of trips made per hour ?
updated 9 years ago by Civil Engineer
0
votes
1717
views
2
answers
In a cantilever beam, the bending moment at any section of the beam is equal to the
updated 9 years ago by Civil Engineer
0
votes
1726
views
2
answers
In a cantilever beam, the bending moment at any section of the beam is equal to the
updated 9 years ago by Civil Engineer
0
votes
1693
views
1
answer
A ball of mass 1 kg moving with a velocity of 2 m/s collides directly with a stationary ball of mass 2 kg and comes to rest after the impact. The velocity of the second ball after impact will be
updated 9 years ago by Civil Engineer
0
votes
1790
views
1
answer
The tipping load of a crane refers to
updated 9 years ago by Civil Engineer
0
votes
2237
views
2
answers
The "Back sight" reading on a vertically held staff at a point A on the floor along the centre line of a railway tunnel is 3.465 m, and the "Fore sight" on the inverted staff held at the roof of the tunnel just vertically above A is 1.115 m. The height of the tunnel along the centre line at floor point A is
updated 9 years ago by Civil Engineer
0
votes
1644
views
1
answer
Why is a proportional flow weir provided in a grit chamber ?
updated 9 years ago by Civil Engineer
0
votes
1645
views
2
answers
The correct sequence of plasticity of min-erals in soil in an increasing order is
updated 9 years ago by Civil Engineer
0
votes
1614
views
2
answers
The effective throat thickness in mm of a 6 mm size fillet weld with an angle of 75° between the fusion faces is
updated 9 years ago by Civil Engineer
1 2 3 4 5 … 240