All Questions

• Newest
• Hottest
• Most votes
• Most views

1 vote	1271 views	3 answers	The desired sensitivity of a bubble tube with 2 mm divisions is 30". The radius of the bubble tube should be updated 11 years ago by Civil Engineer
1 vote	1606 views	1 answer	In optical reading instruments updated 11 years ago by Civil Engineer
1 vote	1481 views	1 answer	A uniform slope was measured by the method of stepping. If the difference in level between two points is 1.8 m and the slope distance between them is 15 m, the error is approximately equal to updated 11 years ago by Civil Engineer
1 vote	1881 views	5 answers	For a curve of radius 100 m and normal chord 10 m, the Rankine's deflection angle, is updated 11 years ago by Civil Engineer
1 vote	1318 views	1 answer	The latitude of a traverse leg is obtained by multiplying its length by updated 11 years ago by Civil Engineer
1 vote	1307 views	1 answer	The angle between two plane mirrors of optical square, is updated 11 years ago by Civil Engineer
1 vote	1562 views	1 answer	If the rate of gain of radial acceleration is 0.3 m per sec3 and full centrifugal ratio is developed. On the curve the ratio of the length of the transition curve of same radius on road and railway, is updated 11 years ago by Civil Engineer
1 vote	1783 views	1 answer	In levelling operation updated 11 years ago by Civil Engineer
1 vote	1266 views	1 answer	The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known updated 11 years ago by Civil Engineer
1 vote	1182 views	1 answer	If the angular measurements of a traverse are more precise than its linear measurements, balancing of the traverse, is done by updated 11 years ago by Civil Engineer