All Questions

• Newest
• Hottest
• Most votes
• Most views

1 vote	1324 views	2 answers	The ratio of the linear displacement at the end of a line, subtended by an arc of one second to the length of the line, is updated 11 years ago by Civil Engineer
1 vote	1548 views	1 answer	While measuring with a metallic tape of 30 m length pull should be applied updated 11 years ago by Civil Engineer
1 vote	1513 views	1 answer	Reduced bearing of a line is an angle between updated 11 years ago by Civil Engineer
1 vote	1980 views	1 answer	Greater accuracy in linear measurements, is obtained by updated 11 years ago by Civil Engineer
1 vote	1509 views	1 answer	If whole circle bearing of a line is 120°, its reduced bearing is updated 11 years ago by Civil Engineer
1 vote	1522 views	1 answer	Accurate measurement of deflection angles with a transit not properly adjusted may be made by updated 11 years ago by Civil Engineer
1 vote	1265 views	1 answer	Ranging in chain survey means updated 11 years ago by Civil Engineer
1 vote	1614 views	2 answers	In a lemniscate curve the ratio of the angle between the tangent at the end of the polar ray and the straight, and the angle between the polar ray and the straight, is updated 11 years ago by Civil Engineer
1 vote	1263 views	1 answer	A lemniscate curve will not be transitional throughout, if its deflection angle, is updated 11 years ago by Civil Engineer
1 vote	2366 views	1 answer	The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is updated 11 years ago by Civil Engineer