All Questions

• Newest
• Hottest
• Most votes
• Most views

1 vote	1512 views	1 answer	Rankine's deflection angle in minutes is obtained by multiplying the length of the chord by updated 10 years ago by Civil Engineer
1 vote	1202 views	1 answer	Perpendicular offset from a tangent to the junction of a transition curve and circular curve is equal to updated 10 years ago by Civil Engineer
1 vote	1421 views	1 answer	If a linear traverse follows a sharp curve round a large lake where it is difficult to have long legs, the accuracy of the traverse may be improved by updated 10 years ago by Civil Engineer
1 vote	1417 views	1 answer	Designation of a curve is made by updated 10 years ago by Civil Engineer
1 vote	1010 views	1 answer	During secular variation of magnetic meridian at different places updated 10 years ago by Civil Engineer
1 vote	1157 views	1 answer	To avoid large centering error with very short legs, observations are generally made updated 10 years ago by Civil Engineer
1 vote	1106 views	1 answer	For indirect ranging, number of ranging rods required, is updated 10 years ago by Civil Engineer
1 vote	1699 views	2 answers	Profile levelling is usually done for determining updated 10 years ago by Civil Engineer
1 vote	1472 views	1 answer	The chaining on sloping ground is updated 10 years ago by Civil Engineer
1 vote	1721 views	1 answer	To orient a plane table at a point P roughly south of the mid-point of two inaccessible conical hill stations A and B in the plains, a point C is selected in line with AB and table is oriented at C by bringing ab in line with AB. A ray is then drawn towards P and at P the table is oriented by back ray method. The orientation so obtained, is updated 10 years ago by Civil Engineer