All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	1229 views	2 answers	The ratio of total elongation of a bar of uniform cross-section produced under its own weight to the elongation produced by an external load equal to the weight of the bar is updated 10 years ago by Civil Engineer
0 votes	1523 views	2 answers	A cold drawn seamless steel tubing subject to internal pressure, has a diameter of 6 cm and wall thickness of 0.2 cm. The ultimate strength of steel is 3600 kg/cm2. The bursting pressure (in kg/cm2) is updated 10 years ago by Civil Engineer
0 votes	2442 views	2 answers	In a tilted aerial photograph, if the swing is 230°, then the rotation angle is equal to updated 10 years ago by Civil Engineer
0 votes	2692 views	3 answers	The graphical condition for equilibrium of concurrent forces is that updated 10 years ago by Civil Engineer
0 votes	2595 views	2 answers	A plot of land 60°m x 20 m is measure steel tape. If the standard error of length width measurements is taken as ± 1 cm, the standard error of the area of the plot be updated 10 years ago by Civil Engineer
0 votes	1620 views	2 answers	A cylindrical shell made of mild steel plate of 100 cm diameter is to be subjected to an internal pressure of 10 kg/cm2. If the material yields at 2000 kg/cm2, assuming factor of safety as four and using maximum principal stress theory, thickness of the plate will be updated 10 years ago by Civil Engineer
0 votes	1429 views	3 answers	The absolute maximum Bending Moment in a simply supported beam of span 20 m due to moving udl of 4 t/m spanning over 5 m is updated 10 years ago by Civil Engineer
0 votes	1306 views	1 answer	According to ICAO recommendations, what is the rate of elevation correction for the runway above MSL ? updated 10 years ago by Civil Engineer
0 votes	1404 views	3 answers	The plastic modulus of a section is 5 x 10-4m3. Its shape factor is 1.2 and the plastic moment capacity is 120 kNm. What is the value of the yield stress of the material ? updated 10 years ago by Civil Engineer
0 votes	1258 views	3 answers	What is the use of a station pointer ? updated 10 years ago by Civil Engineer