All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	569 views	0 answers	ABCD is a regular parallelogram plot of land whose angle BAD is 60°. If the bearing of the line AB is 30°, the bearing of CD, is updated 9 years ago by Civil Engineer
0 votes	484 views	0 answers	For true difference in elevations between two points A and B, the level must be set up updated 9 years ago by Civil Engineer
0 votes	425 views	0 answers	The sensitiveness of a level tube decreases if updated 9 years ago by Civil Engineer
0 votes	428 views	0 answers	For the construction of highway (or railway) updated 9 years ago by Civil Engineer
0 votes	558 views	0 answers	The main principle of surveying is to work updated 9 years ago by Civil Engineer
0 votes	535 views	0 answers	For a closed traverse the omitted measurements may be calculated updated 9 years ago by Civil Engineer
0 votes	965 views	0 answers	Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to updated 9 years ago by Civil Engineer
0 votes	467 views	0 answers	The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to updated 9 years ago by Civil Engineer
0 votes	824 views	0 answers	The most reliable method of plotting a theodolite traverse, is updated 9 years ago by Civil Engineer
0 votes	469 views	0 answers	True meridians are generally preferred to magnetic meridians because updated 9 years ago by Civil Engineer