All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	752 views	1 answer	The consolidation time for soils updated 9 years ago by Civil Engineer
0 votes	1017 views	1 answer	The total weight of a pycnometer with water and oven dried soil 20 (g) is 1600 g. The pycnometer filled with water alone weighs 1500 g. The specific gravity of the soil, is updated 9 years ago by Civil Engineer
0 votes	887 views	3 answers	The ratio of the undrained strength in the undrained state to the undrained strength, at the same water content, in the remoulded state, is called the sensivity of the clay. Its value for quick clays is updated 9 years ago by Civil Engineer
0 votes	738 views	1 answer	The minimum depth of building foundations on updated 9 years ago by Civil Engineer
0 votes	753 views	1 answer	Plasticity index is defined as the range of water content between updated 9 years ago by Civil Engineer
0 votes	869 views	1 answer	. A critical hydraulic gradient may occur when updated 9 years ago by Civil Engineer
0 votes	2117 views	1 answer	For a base failure of a slope, depth factor updated 9 years ago by Civil Engineer
0 votes	1433 views	1 answer	For slopes of limited extent the surface of slippage, is usually along updated 9 years ago by Civil Engineer
0 votes	959 views	1 answer	A soil sample of mass specific gravity 1.92, has a moisture content 30%. If the specific gravity of solids is 2.75, the degree of saturation, is updated 9 years ago by Civil Engineer
0 votes	817 views	2 answers	If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is known as updated 9 years ago by Civil Engineer