All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	839 views	1 answer	The consolidation time for soils updated 9 years ago by Civil Engineer
0 votes	1105 views	1 answer	The total weight of a pycnometer with water and oven dried soil 20 (g) is 1600 g. The pycnometer filled with water alone weighs 1500 g. The specific gravity of the soil, is updated 9 years ago by Civil Engineer
0 votes	979 views	3 answers	The ratio of the undrained strength in the undrained state to the undrained strength, at the same water content, in the remoulded state, is called the sensivity of the clay. Its value for quick clays is updated 9 years ago by Civil Engineer
0 votes	824 views	1 answer	The minimum depth of building foundations on updated 9 years ago by Civil Engineer
0 votes	831 views	1 answer	Plasticity index is defined as the range of water content between updated 9 years ago by Civil Engineer
0 votes	958 views	1 answer	. A critical hydraulic gradient may occur when updated 9 years ago by Civil Engineer
0 votes	2206 views	1 answer	For a base failure of a slope, depth factor updated 9 years ago by Civil Engineer
0 votes	1543 views	1 answer	For slopes of limited extent the surface of slippage, is usually along updated 9 years ago by Civil Engineer
0 votes	1037 views	1 answer	A soil sample of mass specific gravity 1.92, has a moisture content 30%. If the specific gravity of solids is 2.75, the degree of saturation, is updated 9 years ago by Civil Engineer
0 votes	900 views	2 answers	If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is known as updated 9 years ago by Civil Engineer