All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	1275 views	1 answer	The deflection at the free end of a cantilever of rectangular cross-section due to certain loading of 0.8 cm. If the depth of the section is doubled keeping the width the same, then the deflection at the free end due to the same loading will be updated 9 years ago by Civil Engineer
0 votes	2988 views	2 answers	A retaining wall 8 m high with a smooth vertical back retains a clay back fill with C' = 15 kN/m2, φ = 15° and γ = 18 kN/ m3. (Given sin 15° ≅ 0.25). The pressure at the top will, nearly, be equal to updated 9 years ago by Civil Engineer
0 votes	2520 views	1 answer	As a natural material, timber is which one of the following ? updated 9 years ago by Civil Engineer
0 votes	1405 views	2 answers	Denehy's groyne is a special type of groyne which is updated 9 years ago by Civil Engineer
0 votes	1267 views	1 answer	The depreciation charges for a machine are thirty paise per working hour. The machine has a scrap value of Rs 2, 000 and a working hour average life of 24000 hours. What is the purchase price of the machine ? updated 9 years ago by Civil Engineer
0 votes	1414 views	2 answers	The compacting factor test of cement concrete determines its updated 9 years ago by Civil Engineer
0 votes	1318 views	2 answers	At a certain point in a structural member, there are perpendicular stresses 80 N/mm2 and 20 N/mm2, both tensile. What is the equivalent stress in simple tension, according to the maximum principal strain theory ? (Poisson's ratio = 0.25) updated 9 years ago by Civil Engineer
0 votes	2366 views	1 answer	A compound bar consisting of material A and B is tightly secured at the ends. The coefficients of thermal expansion of A is more than that of B. When the temperature is increased the stresses induced will be updated 9 years ago by Civil Engineer
0 votes	1164 views	1 answer	Two closed thin vessels, one cylindrical and the other spherical with equal internal diameter and wall thickness are subjected to equal internal fluid.pressure. The ratio of hope stresses in the cylindrical to that of spherical vessels is updated 9 years ago by Civil Engineer
0 votes	1588 views	1 answer	In a tree, the cambium layer is situated between updated 9 years ago by Civil Engineer