All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	3937 views	2 answers	The minimum head room over a stair must be updated 10 years ago by Civil Engineer
0 votes	939 views	1 answer	After prestressing process is completed, a loss of stress is due to updated 10 years ago by Civil Engineer
0 votes	1551 views	3 answers	The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than updated 10 years ago by Civil Engineer
0 votes	1177 views	2 answers	The spacing of transverse reinforcement of column is decided by the following consideration. updated 10 years ago by Civil Engineer
0 votes	875 views	1 answer	An under-reinforced section means updated 10 years ago by Civil Engineer
0 votes	1481 views	1 answer	On piles, the drop must be at least updated 10 years ago by Civil Engineer
0 votes	1024 views	2 answers	If the shear stress in a R.C.C. beam is updated 10 years ago by Civil Engineer
0 votes	964 views	1 answer	In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed updated 10 years ago by Civil Engineer
0 votes	1298 views	2 answers	An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is updated 10 years ago by Civil Engineer
0 votes	944 views	1 answer	A circular slab subjected to external loading, deflects to form a updated 10 years ago by Civil Engineer