All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	2702 views	2 answers	A CST-9 sleeper consists of updated 10 years ago by Civil Engineer
0 votes	1063 views	3 answers	If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is updated 10 years ago by Civil Engineer
0 votes	1263 views	10 answers	Mr. W. Simms, the consulting Engineer to the Government of India recommended the gauge for Indian railways updated 10 years ago by Civil Engineer
0 votes	1254 views	2 answers	To hold hydraulic jumps, baffle walls are provided in updated 10 years ago by Civil Engineer
0 votes	1149 views	2 answers	The most suitable section of a lined canal, is updated 10 years ago by Civil Engineer
0 votes	1251 views	2 answers	The ratio of the rate of change of discharge of an outlet to the rate of change in level of water surface in a distributary at its normal depth, is known as updated 10 years ago by Civil Engineer
0 votes	908 views	2 answers	While deciding the alignment of a proposed canal taking off from a river at B, three alignments of approximately equal lengths are available. These cross a drainages at C1, C2 and C3 where drainage bed levels C1 > C2 > C3, you will provide at site C3 updated 10 years ago by Civil Engineer
0 votes	910 views	2 answers	For cereal crops the most commonly adopted method of irrigation, is updated 10 years ago by Civil Engineer
0 votes	907 views	1 answer	Process of meandering is due to updated 10 years ago by Civil Engineer
0 votes	863 views	2 answers	According to Lacey, in regime conditions updated 10 years ago by Civil Engineer