All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	1414 views	4 answers	A steel bar 5 m x 50 mm is loaded with 250, 000 N. If the modulus of elasticity of the material is 0.2 MN/mm2 and Poisson's ratio is 0.25, the change in the volume of the bar is : updated 10 years ago by Civil Engineer
0 votes	1139 views	1 answer	At yield point of a test piece, the material updated 10 years ago by Civil Engineer
0 votes	1098 views	2 answers	A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is updated 10 years ago by Civil Engineer
0 votes	957 views	2 answers	The forces in the members of simple trusses, may be analysed by updated 10 years ago by Civil Engineer
0 votes	991 views	2 answers	A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 x 106 N/mm2, the depth of the joist, is updated 10 years ago by Civil Engineer
0 votes	2549 views	3 answers	A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 x 106 N/mm2, the deflection of the free end, is updated 10 years ago by Civil Engineer
0 votes	961 views	5 answers	Flat spiral springs updated 10 years ago by Civil Engineer
0 votes	1120 views	2 answers	A three hinged arch is generally hinged at its supports and updated 10 years ago by Civil Engineer
0 votes	1225 views	3 answers	The greatest load which a spring can carry without getting permanently distorted, is called updated 10 years ago by Civil Engineer
0 votes	1060 views	2 answers	The ratio of shear stress and shear strain of an elastic material, is updated 10 years ago by Civil Engineer