All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	1480 views	4 answers	A steel bar 5 m x 50 mm is loaded with 250, 000 N. If the modulus of elasticity of the material is 0.2 MN/mm2 and Poisson's ratio is 0.25, the change in the volume of the bar is : updated 11 years ago by Civil Engineer
0 votes	1203 views	1 answer	At yield point of a test piece, the material updated 11 years ago by Civil Engineer
0 votes	1152 views	2 answers	A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is updated 11 years ago by Civil Engineer
0 votes	1014 views	2 answers	The forces in the members of simple trusses, may be analysed by updated 11 years ago by Civil Engineer
0 votes	1052 views	2 answers	A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so that the maximum bending stress is 75 N/mm2. If the slope at the ends is 0.005 radian and the value of E = 0.2 x 106 N/mm2, the depth of the joist, is updated 11 years ago by Civil Engineer
0 votes	2609 views	3 answers	A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 x 106 N/mm2, the deflection of the free end, is updated 11 years ago by Civil Engineer
0 votes	1019 views	5 answers	Flat spiral springs updated 11 years ago by Civil Engineer
0 votes	1178 views	2 answers	A three hinged arch is generally hinged at its supports and updated 11 years ago by Civil Engineer
0 votes	1284 views	3 answers	The greatest load which a spring can carry without getting permanently distorted, is called updated 11 years ago by Civil Engineer
0 votes	1117 views	2 answers	The ratio of shear stress and shear strain of an elastic material, is updated 11 years ago by Civil Engineer