All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	452 views	0 answers	To orient a plane table at a point P roughly south of the mid-point of two inaccessible conical hill stations A and B in the plains, a point C is selected in line with AB and table is oriented at C by bringing ab in line with AB. A ray is then drawn towards P and at P the table is oriented by back ray method. The orientation so obtained, is updated 9 years ago by Civil Engineer
0 votes	518 views	0 answers	Bergchrund is a topograhical feature in updated 9 years ago by Civil Engineer
0 votes	454 views	0 answers	The ratio of the distances at which a stated length can be distinguished by the telescope and the human eye, respectively, is called updated 9 years ago by Civil Engineer
0 votes	466 views	0 answers	In an adjusted level, when the bubble is central, the axis of the bubble tube becomes parallel to updated 9 years ago by Civil Engineer
0 votes	454 views	0 answers	The power of a lens updated 9 years ago by Civil Engineer
0 votes	569 views	0 answers	The bearing of AB is 190° and that of CB is 260° 30'. The included angle ABC, is updated 9 years ago by Civil Engineer
0 votes	752 views	0 answers	A standard steel tape of length 30 m and cross-section 15 x 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 x 106 kg/cm2, the correction to be applied is updated 9 years ago by Civil Engineer
0 votes	428 views	0 answers	The zero of the graduated circle of a prismatic compass is located at updated 9 years ago by Civil Engineer
0 votes	460 views	0 answers	Flint glass updated 9 years ago by Civil Engineer
0 votes	484 views	0 answers	For preparation of a contour plan for a route survey updated 9 years ago by Civil Engineer