All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	1782 views	1 answer	A cylindrical vessel with a constant plane area of 1 m2 is rotated about its vertical axis such that the liquid inside the vessel is about to spill. If the height of the vessel is 2 m and the height of the paraboloid at 1 m, then the volume (in m3) of the liquid in the vessel will be updated 10 years ago by Civil Engineer
0 votes	1195 views	2 answers	Which one of the following pairs relating to flumes carrying open channel flow is correctly matched ? updated 10 years ago by Civil Engineer
0 votes	1602 views	5 answers	Which one of the following is correct in respect of the influence line for the bending moment at one-fourths of the span from left support of a prismatic beam simply supported at ends ? updated 10 years ago by Civil Engineer
0 votes	3376 views	5 answers	Timber can be made more fire resistant by updated 10 years ago by Civil Engineer
0 votes	1245 views	2 answers	The plastic section modulus of a rectangular section of width 100 mm and depth 12 mm is updated 10 years ago by Civil Engineer
0 votes	1613 views	3 answers	In a close-coiled helical spring subjected to an axial load, other quantities remaining the same, if the wire diameter is doubled, then the stiffness of the spring when compared to the original one, will become updated 10 years ago by Civil Engineer
0 votes	1225 views	1 answer	Which one of the following is considered to be an advantage of the heading and benching method of tunes construction ? updated 10 years ago by Civil Engineer
0 votes	2537 views	4 answers	Mercury (density = 13600 kg/m3, σ = 0.49N/mm internal diameter open-ended capillary tube is inserted in the middle of the beaker into the mercury. The meniscus in the tube will be below the external mercury surface by how much distance? updated 10 years ago by Civil Engineer
0 votes	2973 views	2 answers	The distance between two bench marks is 1000 m. If during levelling, the total error due to collimation, curvature and refraction is found to be + 0.120 m, then the magnitude of the collimation error is updated 10 years ago by Civil Engineer
0 votes	1226 views	2 answers	What does the confining pressure used in triaxial compression tests on an undisturbed soil sample represent ? updated 10 years ago by Civil Engineer