All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	3691 views	1 answer	The correction to be applied to each 30 metre chain length along θ° slope, is updated 11 years ago by Civil Engineer
0 votes	1024 views	0 answers	The reduced level of a floor is 99.995 m, the staff reading on the floor is 1.505 m. If the inverted staff reading against the roof is 1.795 m, the floor level below the slab, is updated 11 years ago by Civil Engineer
0 votes	1343 views	1 answer	The constant vertical distance between two adjacent contours, is called updated 11 years ago by Civil Engineer
0 votes	1443 views	1 answer	Staff readings on pegs x and y from X station are 1.755 m and 2.850 m, and from station Y on staff head at Y and X are 0.655 m and 1.560 m. If reduced level of X is 105.5 m, the reduced level of Y is updated 11 years ago by Civil Engineer
0 votes	922 views	1 answer	Resolving power of a telescope depends on updated 11 years ago by Civil Engineer
0 votes	954 views	1 answer	The theodolites used for making tacheometric observations by optical wedge system, are updated 11 years ago by Civil Engineer
0 votes	1837 views	1 answer	Straight, parallel and widely spaced contours represent updated 11 years ago by Civil Engineer
0 votes	1057 views	2 answers	In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) updated 11 years ago by Civil Engineer
0 votes	923 views	1 answer	While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be updated 11 years ago by Civil Engineer
0 votes	907 views	1 answer	A lens or combination of lenses in which the following defect is completely eliminated is called aplanatic updated 11 years ago by Civil Engineer