All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	902 views	1 answer	The consolidation time for soils updated 10 years ago by Civil Engineer
0 votes	1187 views	1 answer	The total weight of a pycnometer with water and oven dried soil 20 (g) is 1600 g. The pycnometer filled with water alone weighs 1500 g. The specific gravity of the soil, is updated 10 years ago by Civil Engineer
0 votes	1049 views	3 answers	The ratio of the undrained strength in the undrained state to the undrained strength, at the same water content, in the remoulded state, is called the sensivity of the clay. Its value for quick clays is updated 10 years ago by Civil Engineer
0 votes	896 views	1 answer	The minimum depth of building foundations on updated 10 years ago by Civil Engineer
0 votes	913 views	1 answer	Plasticity index is defined as the range of water content between updated 10 years ago by Civil Engineer
0 votes	1037 views	1 answer	. A critical hydraulic gradient may occur when updated 10 years ago by Civil Engineer
0 votes	2304 views	1 answer	For a base failure of a slope, depth factor updated 10 years ago by Civil Engineer
0 votes	1626 views	1 answer	For slopes of limited extent the surface of slippage, is usually along updated 10 years ago by Civil Engineer
0 votes	1114 views	1 answer	A soil sample of mass specific gravity 1.92, has a moisture content 30%. If the specific gravity of solids is 2.75, the degree of saturation, is updated 10 years ago by Civil Engineer
0 votes	970 views	2 answers	If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is known as updated 10 years ago by Civil Engineer