All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	944 views	1 answer	The width of the flange of a L-beam, should be less than updated 11 years ago by Civil Engineer
0 votes	962 views	2 answers	The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stressess simultaneously, is called updated 11 years ago by Civil Engineer
0 votes	1771 views	2 answers	Enlarged head of a supporting column of a flat slabs is technically .known as updated 11 years ago by Civil Engineer
0 votes	1100 views	2 answers	A column is regarded as long column if the ratio of its effective length and lateral dimension, exceeds updated 11 years ago by Civil Engineer
0 votes	1857 views	2 answers	The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes updated 11 years ago by Civil Engineer
0 votes	1005 views	2 answers	The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm2 respectively. If m = 15, the depth of its neutral axis is updated 11 years ago by Civil Engineer
0 votes	926 views	2 answers	Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds updated 11 years ago by Civil Engineer
0 votes	942 views	2 answers	If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is updated 11 years ago by Civil Engineer
0 votes	1233 views	3 answers	An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is updated 11 years ago by Civil Engineer
0 votes	951 views	4 answers	If W is weight of a retaining wall and P is the horizontal earth pressure, the factor of safety against sliding, is updated 11 years ago by Civil Engineer