All Questions

• Newest
• Hottest
• Most votes
• Most views

0 votes	1944 views	2 answers	Plate load test is useful to estimate updated 10 years ago by Civil Engineer
0 votes	1754 views	2 answers	At the time of initial tensioning the maximum tensile stress in tendon immediately behind the anchorage shall Not exceed updated 10 years ago by Civil Engineer
0 votes	1569 views	3 answers	Increase in fineness of cement updated 10 years ago by Civil Engineer
0 votes	1473 views	5 answers	A parabolic arch, symmetrical, with hinges at centre and ends, carries a point load P at distance x from left support. The arch has a span of 20 m and rise of 5 m. What is the value of x if the left hinge reaction is inclined with a slope of two vertical on one horizontal ? updated 10 years ago by Civil Engineer
0 votes	1787 views	3 answers	When is a masonry wall known as a shear wall ? updated 10 years ago by Civil Engineer
0 votes	1514 views	3 answers	A grinding wheel rotates 3000 rpm. When power supply is cut off, the wheel stops completely in 10 seconds. What is the number of revolutions made by the wheel before coming to rest ? updated 10 years ago by Civil Engineer
0 votes	1333 views	3 answers	Force of buoyancy on a floating body equals updated 10 years ago by Civil Engineer
0 votes	1750 views	4 answers	Presence of which one of the following in water is the major cause of depression paralysis, blindness and/or birth defects ? updated 10 years ago by Civil Engineer
0 votes	1301 views	1 answer	What is the distance through which the tongue rail moves laterally at the toe of the switch for movement of trains called ? updated 10 years ago by Civil Engineer
0 votes	1653 views	2 answers	A clay layer 3 m deep is sandwiched by a pervious material. The soil reaches 90% consolidation in 3 years. At another site, the same clay layer is bounded by impervious boundary at the bottom and sand at the top. What is the time taken by this layer to reach 90% settlement ? updated 10 years ago by Civil Engineer