• Standard Description of IS codes

    by  • January 5, 2011 • Indian Standard Codes • 0 Comments

    Standard Description  of All Indian Standard  Codes

    BISHINDIwith their years of releases


    Bureau of Indian Standards         :      Code of Practices   :

    Standard Description
    IS 1 : 1968 Specification for the national flag of India (cotton khadi)
    SP 1 : 1967 Comparison of Indian and Overseas Standards on Aluminium Alloy Castings
    SP 2 : 1982 Comparison of Indian and Overseas Basic Sizes for Sheet and Wire
    IS 2 : 1960 Rules for rounding off numerical values
    SP 4 : 1970 Metric Change in India
    IS 4 : 1963 Guide for Layout of Learned Periodicals
    IS 5 : 1994 Colours for ready mixed paints and enamels
    IS 6 : 1983 Specification for Moderate Heat Duty Fireclay Refractories, Group `A’
    SP 6 : Part 1 : 1964 Handbook for structural engineers – Structural steel sections
    SP 6 : Part 2 : 1962 Handbook For Structural Engineers – 2 : Steel Beams and Plate Girders
    SP 6 : Part 3 : 1962 Handbook Structural Engineers – Part 3 : Steel Columns and Struts
    SP 6 : Part 4 : 1969 ISI Handbook for Structural Engineers 4. Use of High Strength Friction Grip Bolts
    SP 6 : Part 5 : 1980 Handbook for structural engineers – Cold-formed, light gauge steel structures
    SP 6 : Part 6 : 1972 Handbook for structural engineers – Application of plastic theory in design of steel structures
    SP 6 : Part 7 : 1972 ISI Handbook for Structural Engineers – Part 7 : Simple Welded Girders
    SP 7 : 1983 National buiding code of India 1983
    SP 8 : 1970 ISI Handbook of Mathematical, Physical, Chemical and Engineering Tables
    IS 8 : 1994 High heat duty fireclay refractories
    IS 9 : 1982 Method for determination of dimensional changes of woven fabrics on washing near the boiling point
    SP 9 : 1973 Technical data sheet for gases conveyed in cylinders
    SP 10 : 1975 Nomograms for Thickness of Masonry Walls
    IS 10 : Part 1 : 1990 Specification for plywood tea-chests, Part 1 General
    IS 10 : Part 2 : 1996 Specification for plywood tea-chest: Part 2 Plywood
    IS 10 : Part 3 : 1974 Specification for plywood tea-chests, Part 3 Battens
    IS 10 : Part 4 : 1989 Specification for plywood tea-chests, Part 4 Metal fittings
    IS 10 : Part 5 : 1976 Specification for plywood tea-chests, Part 5 Assembly and packing
    IS 11 : 1987 Grading of wool for export
    SP 11 : 1973 Recommended SI Units for Textiles
    SP 12 : 1975 Handbook for Gas Welders
    IS 12 : 1988 Guide for Drafting and Presentation of Indian Standard
    SP 14 : 1976 Index to Steel Designations
    IS 15 : 1973 Specification for Seedlac
    SP 15 : Part 1 : 1989 Handbook of Textile Testing – Part 1 : Testing and Grading of Textile Fibres
    SP 15 : Part 2 : 2000 Handbook of Textile Testing – Part 2 : Testing of Yarns and Fabrics (Excluding Colourfastness)
    SP 15 : Part 3 : 1990 – Handbook of Textile Testing – Part 3 : Testing of Textile Products Other than Yarns ⊥ Fabrics
    SP 16 : 1980 Design Aids for Reinforced Concrete to IS 456 : 1978
    IS 16 : Part 1 : 1991 Shellac – Specification – Part 1 : Hand Made Shellac
    IS 16 : Part 2 : 1991 Shellac – Specification – Part 2 : Machine-made shellac
    SP 17 : 1979 Index to IS 1956 Glossary of Terms Relating to Iron and Steel
    IS 17 : 1973 Specification for Bleached Lac
    IS 18 : 1999 /ISO 4 : 1997 Information and Documentation-rules for the Abbreviation of Title Words and Titles of Publications
    SP 18 : Part I : 1980 ISI Handbook of Food Analysis – Part I : General Methods
    SP 18 : Parts II to IV : 1984 ISI Handbook of Food Analysis – Part II : Sugar and Honey – Part III : Edible Starches and Starch Products SP 18 : Parts V, VI and VII : 1982 ISI Handbook of Food Analysis – Part V : Bakery and Confectionery Products – Part VI : Protein-SP 18 : Parts VIII, IX and X : 1984 ISI Handbook of Food Analysis – Part VIII : Fruits and Vegetables – Part IX : Stimulant Foods SP 18 : Part XI : 1981 Handbook of Food Analysis – Part XI : Dairy Products
    SP 18 : Parts XII, XIII, XIV and XV : 1984 ISI Handbook of Food Analysis – Parts XII, XIII, XIV & XV
    SP 19 : 1980 Guidelines for Classification of Quality of Scraped Surfaces
    SP 20 (S and T) : 1991 Handbook on Masonry Design and Construction
    SP 21 (S and T) : 1983 Summaries of Indian Standards for Building Materials
    IS 21 : 1992 Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils – Specification
    SP 22 : 1982 Explanatory Handbook on Codes for Earthquake Engineering
    SP 23 : 1982 Handbook on Concrete Mixes
    IS 23 : 1980 Specification for Primary Aluminium Ingots for Remelting for Aircraft Purposes
    SP 24 (S and T) : 1983 Explanatory Handbook on Indian Standard Code of Practice for Plain and Reinforced Concrete
    SP 25 : 1984 Handbook on Causes and Prevention of Cracks in Buildings
    IS 25 : 1979 Specification for antifriction bearing alloys
    SP 26 : 1983 ISI steam tables in SI units
    IS 26 : 1992 Tin Ingot – Specification (Fourth Revision)
    IS 27 : 1992 Pig Lead – Specification
    SP 27 : 1987 Handbook on method of measurement of buildings works
    SP 28 : 1994 Handbook on Statistical Quality Control
    IS 28 : 1985 Phosphor bronze ingots and castings
    SP 29 Part 1 : 1985 Handbook on Industrial Fasteners Part 1
    SP 29 : Part 2 : 1987 Handbook on Industrial Fasteners – Part 2 : Bolts, Nuts, Screws and other Threaded Fasteners, and Washers
    SP 29 Part 3 : 1987 Handbook on Industrial Fastness – Part 3 : Rivets, Pins, Nails, Keys and Keyways, Cotters and other Non-SP 30 : 1985 Special Publication – National Electrical Code
    SP 31 : 1986 Methods of Artificial Respiration
    IS 32 : 1971 Code for seaworthy packaging of woollen and worsted yarn and cloth
    SP 32 : 1986 Handbook on Functional Requirements of Industrial Buildings (Lighting and Ventilation)
    SP 33 : 1986 Handbook on Timber Engineering
    IS 33 : 1992 Inorganic Pigments and Extenders for Paints – Methods of Sampling and Test
    SP 34 : 1987 Handbook on Concrete Reinforcement and Detailing
    SP 35 : 1987 Handbook on Water Supply and Drainage (with Special Emphasis on Plumbing)
    IS 35 : 1975 Specification for zinc oxide for paints
    SP 36 : Part 1 : 1987 Compendium of Indian standards on soil engineering: Part 1 Laboratory testing of soils for civil engineering SP 36 : Part 2 : 1988 Compendium of Indian standards on soil engineering: Part 2 Field testing
    SP 37 : Part 3 : 1987 Handbook for Refractories – Part 3 : Refractories for Cement Kiln System
    SP 38 (S and T) : 1987 Handbook of Typified Designs for Structures with Steel Roof Trusses (with and without Cranes) (Based IS 38 : 1976 Specification for Antimony oxide for paints
    SP 39 : 1987 Special Publication – Guide for insulation coordination within low voltage systems
    SP 40 (S and T) : 1987 Handbook on Structures with Steel Portal Frames
    IS 40 : 1971 Specification for Carbon Black for Paints
    IS/IEC 41 : 1991 Field Acceptance Tests to Determine the Hydraulic Performance of Hydraulic Turbines, Storage Pumps and Pump SP 41 (S and T) : 1987 Handbook on Functional Requirements of Buildings (Other than Industrial Buildings)
    SP 42 : 1987 Survey of screw threads
    SP 43 (S and T) : 1987 Handbook on Structures with Reinforced Concrete Portal Frames (Without Cranes)
    SP 44 : 1989 Handbook of Agricultural Machinery Terminology
    IS 44 : 1991 Iron Oxide Pigments for Paints – Specification
    SP 45 : 1988 Handbook on Glossary of Textile Terms
    SP 46 : 1988 Engineering drawing practice for schools and colleges
    SP 47 (S and T) : 1988 Handbook on Structures with Steel Lattice Portal Frames (Without Cranes)
    SP 48 : 1991 Guide for requirements and testing of electric iron
    SP 49 : 1991 Guide for requirements and testing of electric immersion water heaters
    IS 50 : 1980 Specification for Lead and Scarlet Chromes
    SP 50 : 1991 Guide for requirements and testing of electric radiators
    IS/ISO/IEC GUIDE 51 : 1990 Guidelines for the Inclusion of Safety Aspects in Standards
    SP 51 : 1991 Guide for requirement and testing of electric stove
    IS 51 : 1998 Zinc chrome for paints – Specification
    SP 53 : 1992 Hand operated hand tools – Safety code for the use, care and protection
    IS 54 : 1988 Specification for Green Oxide of Chromium for Paints
    SP 55 : 1993 Design Aid for Anchorages for Spillway Piers, Training Walls and Divide Walls
    IS 55 : 1970 Specification for ultramarine blue for paints
    SP (QAWSM) 56 : 1994 Location, Operation and Maintenance of Tube/Bore Wells – Guidelines
    IS 56 : 1993 Prussian blue (iron blue) for paints
    SP 57 (QAWSM) : 1993 Handbook on Pipes and Fittings for Drinking Water Supply
    IS 57 : 1989 Red Lead for Paints and Other Purposes – Specification
    SP 58 : 1995 Handbook on Pumps for Drinking Water Supply
    IS 58 : 1976 Specification for litharge
    SP 59 : 1993 Guidelines on Matters of Interest to Consumers – Product Information Including Instructions for Use and Packaging, SP 60 : 1993 Guidelines for Competence, Acceptance and Accreditation of Laboratories, Inspection Bodies, Certification Bodies SP 61 : 1994 General guidelines for automatic weather stations
    SP 62 (S and T) : 1997 Handbook on Building Construction Practices (Excluding Electrical Work)
    IS 62 : 1950 Specification for graphite for paints
    SP 63 : 1997 Explanatory guide for the application of quality system standards (IS/ISO 9001, 9002 and 9003)
    IS 63 : 1978 Specification for Whiting for Paint and Putty
    SP 64 (S & T) : 2001 Explanatory Handbook on Indian Standard Code of Practice for Design Loads (Other than Earthquake) for IS 64 : 1972 Specification for Barium Sulphate Pigments for Paints
    SP 65 : 1998 Handbook on IS/ISO 9000 for Small Businesses
    IS 66 : 1972 Specification for magnesium silicate pigments for paints
    SP 67 : 2000 Guidelines for Managing the Economics of Quality
    IS 67 : 1998 Silica for paints – Specificatin
    SP 68 : 2000 Guidance on Statistical Techniques for ISO 9001 : 1994
    IS 68 : 1979 China clay (Kaolin) for paints
    SP 69 : 2000 Banking and Related Financial Services – Information Security Guidelines
    SP 70 : 2001 Handbook on Construction Safety Practices
    IS 70 : 1980 Indian Standard Specification for cuprous oxide for paints
    IS 73 : 1992 Specification for paving bitumen
    IS 74 : 1979 Methods of Sampling and Test for Drying Oils for Paints
    IS 75 : 1973 Indian Standard Specification for Linseed Oil, Raw and Refined
    IS 77 : 1976 Specification for Linseed Oil, Boiled, for Paints
    IS 79 : 1975 Specification for linseed stand oil for paints
    IS 80 : 1991 Tung Oil for Paints – Specification
    IS 81 : 1989 Dehydrated castor oil for paints – Specification
    IS 82 : 1973 Method of sampling and test for thinners and solvent for paints
    IS/ISO 94 : 1982 Textile Machinery and Accessories – Spindle Gauges for Ring-spinning and Ring-doubling Frames
    IS 101 : Part 1 : Sec 1 : 1986 Methods of Sampling and test for paints, varnishes and related products – Part 1 : Tests on liquid IS 101 : Part 1 : Sec 2 : 1987 Methods of Sampling and Test for Paints, Varnishes and Related Products – Part 1 : Tests on Liquid IS 101 : Part 1 : Sec 3 : 1986 Methods of sampling and test for paints, varnishes and related products – Part 1 : Tests on liquid IS 101 : Part 1 : Sec 4 : 1987 Methods of Sampling and Test for Paints, Varnishes and Related Products – Part 1 : Tests on Liquid IS 101 : Part 1 : Sec 5 : 1989 Methods of sampling and test for paints, varnishes and related products – Part 1 : Tests on liquid IS 101 : Part 1 : Sec 6 : 1987 Methods of sampling and test for paints, varnishes and related products – Part 1 : tests on liquid paints IS 101 : Part 1 : Sec 7 : 1987 Methods of sampling and test for paints, varnishes and related products – Part 1 test on liquid paints IS 101 : Part 2 : Sec 1 : 1988 Methods of sampling and test for paints, varnishes and related products – Part 2 : tests on liquid paints IS 101 : Part 2 : Sec 2 : 1986 Methods of sampling and test for paints, varnishes and related products – Part 2 : test on liquid paints IS 101 : Part 3 : Sec 1 : 1986 Methods of sampling and test for paints, varnishes and related products – Part 3 : tests on paint film IS 101 : Part 3 : Sec 2 : 1989 Methods of sampling and test for paints, varnishes and related products – Part 3 : tests on paint film IS 101 : Part 3 : Sec 4 : 1987 Methods of sampling and test for paints, varnishes and related products – Part 3 : Tests on paint film IS 101 : Part 3 : Sec 5 : 1987 Methods of sampling and test for paints, varnishes and related products – Part 3 : Tests on paint film IS 101 : Part 4 : Sec 1 : 1988 Methods of Sampling and Test for Paints, Varnishes and Related Products – Part 4 : Optical Test IS 101 : Part 4 : Sec 2 : 1989 Methods of Sampling and test for paints, varnishes and related products – Part 4 : Optical tests – Section IS 101 : Part 4 : Sec 3 : 1988 Methods of Sampling and Test for Paints, Varnishes and Related Products – Part 4 : Optical Tests IS 101 : Part 4 : Sec 4 : 1988 Methods of sampling and Test for Paints, Varnishes and Related Products – Part 4 : Optical Test IS 101 : Part 5 : Sec 1 : 1988 Methods of sampling and test for paints, varnishes and related products – Part 5 : Mechanical test IS 101 : Part 5 : Sec 2 : 1988 Methods of Sampling and Test for Paints, Varnishes and Related Products – Part 5 : Mechanical
    IS 101 : Part 5 : Sec 3 : 1999 Methods of Sampling and Test for Paints, Varnishes and Related Products – Part 5 : Mechanical IS 101 : Part 5 : Sec 4 : 1988 Methods of sampling and test for paints, varnishes and related products – Part 5 : Mechanical tests IS 101 : Part 6 : Sec 1 : 1988 Methods of sampling and test for paints, varnishes and related products – Part 6 : Durability tests IS 101 : Part 6 : Sec 2 : 1989 Methods of sampling and test for paints, varnishes and related products – Part 6 : Durability test on IS 101 : Part 6 : Sec 3 : 1990 Methods of sampling and test for paints, varnishes and related products – Part 6 : Durability tests IS 101 : Part 6 : Sec 4 : 1991 Methods of sampling and test for paints, varnishes and related products – Part 6 : Durability tests IS 101 : Part 6 : Sec 5 : 1997 Methods of sampling and test for paints, varnishes and related products – Part 6 : Durability tests IS 101 : Part 7 : Sec 1 : 1989 Methods of Sampling and Test for Paints, Varnishes and Related Products – Part 7 : Environmental IS 101 : Part 7 : Sec 2 : 1990 Methods of sampling and test for paints, varnishes and related products – Part 7 : Environmental IS 101 : Part 7 : Sec 3 : 1990 Methods of sampling and test for paints, varnishes and related products – Part 7 : Environmental IS 101 : Part 7 : Sec 4 : 1990 Methods of sampling and test for paints, varnishes and related products – Part 7 : Environmental IS 101 : Part 8 : Sec 1 : 1989 Methods of Sampling and Test for Paints, Varnishes and Related products – Part 8 : Test for Pigments IS 101 : Part 8 : Sec 2 : 1990 Methods of sampling-and test for paints, varnishes and related products – Part 8 : Tests for pigments IS 101 : Part 8 : Sec 3 : 1993 Methods of sampling and test for paints, varnishes and related products – Part 8 : Tests for pigments IS 101 : Part 8 : Sec 4 : 1993 Methods of Sampling and Test for Paints, Varnishes and Related Products – Part 8 : Tests for Pigments IS 101 : Part 8 : Sec 5 : 1993 Methods of sampling and test for paints, varnishes and related products – Part 8 : Tests for pigments IS 101 : Part 8 : Sec 6 : 1993 Methods of sampling and test for paints, varnishes and related products – Part 8 : Tests for pigments IS 101 : Part 9 : Sec 1 : 1993 Methods of sampling and test for paints, varnishes and related products – Part 9 : Tests for lacquers IS 101 : Part 9 : Sec 2 : 1993 Methods of sampling and test for paints, varnishes and related products – Part 9 : Tests for lacquers IS 104 : 1979 Specification for ready mixed paint, brushing, zinc chrome, priming
    IS 109 : 1968 Specification for Ready Mixed Paint, Brushing, Priming, Plaster, to Indian Standard Colour No. 361 Light Stone, and IS 110 : 1983 Specification for Ready Mixed Paint, Brushing, Grey Filler, for Enamels, for Use Over Primers
    IS 123 : 1962 Specification for Ready Mixed Paint, Brushing, Finishing, Semi-Gloss, for General Purposes, to Indian Standard IS/IEC Pub 127-1 : 1988 Miniature Fuses – Part 1 : Definition for Miniature Fuses and General Requirements for Miniature Fuse IS/IEC 127-2 : 1989 Miniature Fuses – Part 2 : Cartridge Fuse Links – Specification
    IS/IEC 127-6 : 1994 Miniature Fuses – Part 6 : Fuse Holders for Miniature Cartridge Fuse Links – Specification
    IS 133 : 1993 Enamel, Interior : (a) Undercoating (b) Finishing – Specification
    IS 137 : 1965 Specification for Ready Mixed Paint, Brushing, Matt or Egg-shell Flat, Finishing, Interior, to Indian Standard Colour, IS 138 : 1992 Ready Mixed Paint, Marking, for Packages and Petrol Containers – Specification
    IS 139 : 1981 Ready mixed paint, marking, quick drying, for marking with rubber stamps
    IS 140 : 1980 Ready mixed paint, exterior, petrol resisting, air drying
    IS 142 : 1980 Ready mixed paint, exterior, petrol resisting stoving
    IS 144 : 1950 Ready mixed paint, brushing, petrol resisting, air-drying, for interior painting of tanks and container, red oxide (colour IS 145 : 1950 Ready mixed paint, slushing, petrol resisting, air-drying for interior painting of tanks and containers, red oxide (colour IS 146 : 1950 Specification for ready mixed paint, brushing, petrol resisting, stoving, or interior painting of tanks and containers, IS 147 : 1950 Specification for ready mixed paint, slushing, petrol resisting, stoving, for interior painting of tanks and containers, IS 150 : 1950 Indian Standard Specification for ready mixed paint, brushing, finishing, stoving, enamel, colour as required
    IS 151 : 1985 Specification for ready mixed paint, spraying finishing, stoving, enamel, for general purposes, colour as required
    IS 158 : 1981 Ready mixed paint, brushing, bituminous, black, lead-free, acid, alkali and heat resisting
    IS 159 : 1981 Ready mixed paint, brushing, acid resisting
    IS 164 : 1981 Specification for Ready Mixed Paint for Road Marking
    IS 168 : 1993 Ready mixed paint, air drying, for general purpose – Specification
    IS 170 : 1986 Specification for Acetone
    IS 171 : 1993 Textiles – Ring spun grey cotton yarn for weaving – Specification
    IS 174 : 1983 Specification for Flannelettes
    IS 175 : 1989 Sheeting, Tickings and Bedsheets – Specification
    IS 177 : 1989 Cotton Drills – Specification
    IS 178 : 1984 Specification for Cotton Twill
    IS 179 : 1977 Specification for Cotton Dosuti
    IS 181 : 1984 Specification for Leopard Cloth
    IS 182 : 1983 Specification for Mazri
    IS 186 : 1983 Specification for Cotton Mulls
    IS 187 : 1978 Specification for Cotton Long Cloth
    IS 188 : 1980 Specification for Cotton Poplin
    IS 189 : 1977 Specification for Tamarind Kernel Powder for Use in Cotton and Jute Textile Industries
    IS 190 : 1991 Specification for coniferous sawn timber (baulks and scantling)
    IS 191 : Parts I to X : 1980 Specification for Copper
    IS 193 : 2000 Soft Solder – Specification
    IS 195 : 1991 Fireclay Mortar for Laying Fireclay Refractory Bricks – Specification
    IS 196 : 1966 Atmospheric Conditions for Testing
    IS 198 : 1978 Specification for Varnish, Gold Size
    IS 199 : 1989 Textiles- Estimation of moisture, total size or finish, ash and fatty matter in grey and finished cotton textile materials
    IS 200 : 1989 Textiles – Determination of Copper Number of Cotton Textile Materials
    IS 201 : 1992 Quality tolerance for water for textile industry – Specification
    IS 202 : 1981 Specification for Aluminium Casting Alloy Ingots and Castings for Aircraft Purposes
    IS 204 : Part 1 : 1991 Specificaion for tower bolts: Part 1 Ferrous metals
    IS 204 : Part 2 : 1992 Specification for tower bolts: Part 2 Non-ferrous metals
    IS 205 : 1992 Specification for non-ferrous metal butt hinges
    IS 206 : 1992 Specification for tee and strap hinges
    IS 207 : 1964 Specification for Gate and Shutter Hooks and Eyes
    IS 208 : 1996 Specification for door handles
    IS 209 : 1992 Zinc Ingot – Specification
    IS 210 : 1993 Grey Iron Castings – Specification
    IS 211 : 1992 Antimony Ingot – Specification
    IS 212 : 1983 Specification for crude coal tar for general use
    IS 215 : 1995 Road Tar – Specification
    IS 216 : 1961 Specification for coal tar pitch
    IS 217 : 1988 Specification for Cutback Bitumen
    IS 218 : 1983 Specification for Creosote Oil for Use as Wood Preservatives
    IS 220 : 1988 Fountain Pen Ink – Ferro-gallo Tannate (0.1 Percent Iron Content) – Specification
    IS 228 : Part 1 : 1987 Methods of chemical analysis of steels: Part 1 Determination of carbon by volumetric method (for carbon IS 228 : Part 2 : 1987 Methods for Chemical Analysis of Steels – Part 2 : Determination of Manganese in Plain-Carbon and Low IS 228 : Part 3 : 1987 Methods of chemical analysis of steels: Part 3 Determination of phosphorus by alkalimetric method
    IS 228 : Part 4 : 1987 Methods of chemical analysis of steels: Part 4 Determination of total carbon by gravimetric method (for carbon IS 228 : Part 5 : 1987 Methods of chemical analysis of steels: Part 5 Determination of nickel by dimethyl glyoxime (gravimetric) IS 228 : Part 6 : 1987 Methods for Chemical Analysis of Steels – Part 6 : Determination of Chromium by Persulphate Oxidation IS 228 : Part 7 : 1990 Methods of chemical analysis of steels: Part 7 Determination of molybdenum by alpha-benzoinoxime method IS 228 : Part 8 : 1989 Methods of chemical analysis of steels: Part 8 Determination of silicon by gravimetric method (for silicon IS 228 : Part 9 : 1989 Methods of chemical analysis of steels: Part 9 Determination of sulphur in plain carbon steels by evolution IS 228 : Part 10 : 1989 Methods of chemical analysis of steels: Part 10 Determination of molybdenum by thiocynate (photometric) IS 228 : Part 11 : 1990 Methods of chemical analysis of steels: Part 11 Determination of total silicon by reduced molyddosilicate IS 228 : Part 12 : 2001 Methods of Chemical Analysis of Steels – Part 12 : Determination of Manganese by Periodate Spectrophotometric IS 228 : Part XIII : 1982 Methods for Chemical Analysis of Steels – Part XIII : Determination of Arsenic
    IS 228 : Part 14 : 1988 Methods of chemical analysis of steels: Part 14 Determination of carbon by thermal conductivity method IS 228 : Part 15 : 1992 Methods of chemical analysis of steels: Part 15 Determination of copper by thiosulphate iodide method IS 228 : Part 16 : 1992 Methods of chemical analysis of steels: Part 16 Determination of tungsten by spectrophotometric method IS 228 : Part 18 : 1998 Methods of chemical analysis of steels: Part 18 Determination of oxygen by instrumental method
    IS 228 : Part 19 : 1998 Methods of chemical analysis of steels: Part 19 Determination of nitrogen by steam distillation
    IS 228 : Part 22 : 2003 Methods of Chemical Analysis of Steels – Part 22 : Determination of Total Hydrogen in Steel by Thermal IS 228 : Part 23 : 2003 Methods of Chemical Analysis of Steels – Part 23 : Determination of Total Nitrogen in Steel by Optical Emission IS 228 : Part 24 : 2003 Methods of Chemical Analysis of Steels – Part 24 : Determination of Nitrogen in Steel by Inert Gas Fusion IS 229 : 1993 Ethyl acetate – Specification
    IS 230 : 1972 Specification for Normal butyl acetate
    IS 231 : 1957 Specification for Amyl Acetate
    IS 232 : 1985 Glossary of Textile Terms – Natural Fibres
    IS 233 : Parts I to IV : 1978 Methods for Determination of Length Parameters of Cotton Fibres
    IS 234 : 1973 Methods for determination of linear density of textile fibres (gravimetric method)
    IS 235 : 1989 Textile Fibres – Tensile Characteristics of Individual Fibres – Methods for Determination
    IS 236 : 1968 Methods for determination of Cotton fibre maturity (by sodium hydroxide swelling method)
    IS 244 : 1984 Method for determination of viscosity (or fluidity) of solutions of cotton and regenerated cellulosic man-made fibres IS 245 : 1988 Specification for Trichloroethylene, Technical
    IS 246 : 1986 Sodium thiosulphate, crystalline, photographic grade
    IS 247 : 1987 Sodium sulphite, anhydrous
    IS 248 : 1987 Sodium bisulphite, technical (sodium metabisulphite)
    IS 249 : 1979 Sodium bichromate, technical
    IS 250 : 1964 Potassium bichromate, technical and analytical reagent
    IS 251 : 1998 Soda ash, technical – Specification
    IS 252 : 1991 Caustic soda, pure and technical
    IS 253 : 1985 Specification for Edible Common Salt
    IS 254 : 1973 Specification for Magnesium Chloride
    IS 255 : 1982 Sodium sulphate, anhydrous (technical grade)
    IS 256 : 1972 Glauber salt (sodium sulphate, decahydrate), technical
    IS 258 : 2000 Potash Alum – Specification
    IS 259 : 1969 Ammonium alum
    IS 260 : 2001 Aluminium Sulphate, Non-ferric – Specification
    IS 261 : 1982 Copper sulphate
    IS 262 : 1982 Specification for Ferrous Sulphate, Heptahydrate
    IS 263 : 1990 Boric acid for cosmetic industry – Specification
    IS 264 : 1976 Nitric acid
    IS 265 : 1993 Hydrochloric acid
    IS 266 : 1993 Sulphuric acid
    IS 269 : 1989 Specification for 33 grade ordinary portland cement
    IS 271 : 1987 Grading of white, Tossa and Daisee uncut Indian Jute
    IS 273 : 1990 Picks and Beaters – Specification
    IS 274 : Part I and II : 1981 Specification for Shovels – Part 1 : General Purpose Shovels – Part II : Heat-Treated Shovels
    IS 275 : 1982 Specification for Padlocks, Lever Type, Handmade
    IS 276 : 2000 Austenitic-Manganese Steel Castings – Specification
    IS 277 : 1992 Galvanized Steel Sheets (Plain and Corrugated) – Specification
    IS 278 : 1978 Specification for Galvanized Steel Barbed Wire for Fencing
    IS 279 : 1981 Galvanized steel wire for telegraph and telephone purposes
    IS 280 : 1978 Specification for Mild Steel Wire for General Engineering Purposes
    IS 281 : 1991 Mild Steel Sliding Door Bolts for Use with Padlocks – Specification
    IS 283 : 1976 Porcelain insulators for telegraph and telephone lines
    IS 285 : 1992 Laundry Soaps – Specification
    IS 286 : 1978 Methods of Sampling and Test for Soaps
    IS 287 : 1993 Permissible Moisture Content for Timber Used for Different Purposes – Recommendations
    IS 288 : 1981 Arsenical copper rods for boiler stay bolts and rivets
    IS 289 : 1963 Specification for Aluminium Paste for Paints
    IS 291 : 1989 Machining Purposes – Specification
    IS 292 : 1983 Specification for Leaded Brass Ingots and Castings
    IS 293 : 1980 Code for seaworthy packaging of cotton yarn and cloth
    IS 294 : 1979 Specification for super phosphate
    IS 296 : 1986 Specification for Sodium Carbonate, Anhydrous
    IS 297 : 2001 Sodium Sulphide, Technical – Specification
    IS 299 : 1989 Alumino-ferric
    IS 300 : 1968 Specification for the national flag of India (silk khadi)
    IS 301 : 1982 Specification for Potassium nitrate for explosive and pyrotechnic compositions
    IS 302 : Part 1 : 1979 General and Safety Requirements for Household and Similar Electrical Appliances
    IS 302 : Part 2 : Sec 2 : 1997 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 2 Vacuum IS 302 : Part 2 : Sec 3 : 1992 Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 3 Electric IS 302 : Part 2 : Sec 4 : 1993 Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 4 Spin IS 302 : Part 2 : Sec 6 : 1993 Safety of household and similar electrical appliances: Part 2 Particuar requirements, Section 6 Cooking IS 302 : Part 2 : Sec 7 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 7 Domestic IS 302 : Part 2 : Sec 8 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 8 Electric IS 302 : Part 2 : Sec 9 : 1993 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 9 Electric IS 302 : Part 2 : Sec 11 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 11 IS 302 : Part 2 : Sec 12 : 1993 Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 12 IS 302 : Part 2 : Sec 13 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 13 IS 302 : Part 2 : Sec 14 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements. Section 14 IS 302 : Part 2 : Sec 15 : 1993 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 15 IS 302 : Part 2 : Sec 21 : 1992 Safety of household and similar electrical appliances: Part 2 Particlar requirements, Section 21 Stationary IS 302 : Part 2 : Sec 23 : 1993 Safety of household and similar elecrical appliances: Part 2 Particular requirements, Section 23 IS 302 : Part 2 : Sec 24 : 1994 Safety of household and similar electrical appliances:Part 2 Particular requirements Sec 24 Refrigerators, IS 302 : Part 2 : Sec 25 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 IS 302 : Part 2 : Sec 26 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 26 IS 302 : Part 2 : Sec 30 : 1992 Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 30 IS 302 : Part 2 : Sec 32 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 32 IS 302 : Part 2 : Sec 35 : 1993 Safety of Household and Similar Electrical Appliances – Part 2 : Particular Requirements – Section IS 302 : Part 2 : Sec 45 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 45 Electric IS 302 : Part 2 : Sec 46 : 1993 Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 46 IS 302 : Part 2 : Sec 59 : 1999 Safety of Household and Similar Electrical Appliances – Part 2 : Particular Requirements – Section IS 302 : Part 2 : Sec 76 : 1999 Safety of Household and Similar Electrical Appliances – Part 2 : Particular Requirements – Section IS 302 : Part 2 : Sec 201 : 1992 Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 201 IS 302 : Part 2 : Sec 202 : 1992 Safety of household and similar electrical appliances: Part 2 Particular requirements, Section 202 IS 302 : Part 2 : Sec 203 : 1994 Safety of Household and Similar Electrical Appliances – Part 2 : Particular Requirements – Section IS 302 : Part 2 : Sec 204 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 204 IS 302 : Part 2 : Sec 205 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 205 IS 302 : Part 2 : Sec 206 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 206 IS 302 : Part 2 : Sec 207 : 1994 Safety of household and similar electrical appliances: Part 2 Particular requirements, Sec 207 IS 302 : Part 2 : Sec 208 : 1994 Safety of Household and Similar Electrical Appliances – Part 2 : Particular Requirements – Section IS 302 : Part 2 : Sec 209 : 1994 Safety of Household and Similar Electrical Appliances – Part 2 : Particular Requirements – Section IS 303 : 1989 Specification for plywood for general purposes
    IS 304 : 1981 Specification for High Tensile Brass Ingots and Castings
    IS 305 : 1981 Specification for Aluminium Bronze Ingots and Castings
    IS 306 : 1983 Tin bronze ingots and castings
    IS 307 : 1966 Carbon dioxide
    IS 308 : 1988 Dissolved acetylene (gas)
    IS 309 : 1992 Compressed Oxygen gas
    IS/IEC 309-1 : 1988 Plugs, Socket-outlets and Couplers for Industrial Purposes – Part 1 : General Requirements
    IS/IEC 309-2 : 1989 Plugs, Socket-outlets and Couplers for Industrial Purposes – Part 2 : Dimensional Interchangeability Requirements IS 318 : 1981 Specification for Leaded Tin Bronze Ingots and Castings
    IS 319 : 1989 Free Cutting Leaded Brass Bars, Rods and Sections – Specification
    IS 320 : 1980 Specification for High Tensile Brass Rods and Sections (Other Than Forging Stock)
    IS 321 : 1964 Specification for absolute alcohol
    IS 323 : 1959 Specification for Rectified Spirit
    IS/ISO 324 : 1978 Textile Machinery and Accessories – Cones for Cross Winding for Dyeing Purposes – Half Angle of the Cone IS 324 : 1959 Specification for Ordinary Denatured Spirit
    IS 325 : 1996 Three-phase induction motors
    IS 326 : Part 1 : 1984 Methods of Sampling and Test for Natural and Synthetic Perfumery Materials – Part 1 : Sampling
    IS 326 : Part 2 : 1980 Methods of sampling and test for natural and synthetic perfumery materials (Part 2) Preliminary examination IS 326 : Part III : 1980 Methods of Sampling and Test for Natural and Synthetic Perfumery Materials – Part III : Relative density
    IS 326 : Part IV : 1980 Methods of Sampling and Test for Natural and Synthetic Perfumery Materials – Part IV : Determination of IS 326 : Part 5 : 1986 Methods of Test for Natural and Synthetic Perfumery Materials – Part 5 : Determination of Refractive Index
    IS 326 : Part 6 : 1986 Methods of sampling and test for natural and synthetic perfumery materials (Part 6) Determination of solubility
    IS 326 : Part 7 : 1980 Methods of sampling and test for natural and synthetic perfumery materials (Part 7) Determination of acid IS 326 : Part 8 : 1980 Methods of sampling and test for natural and synthetic perfumery materials (Part 8) Determination of ester IS 326 : Part IX : 1980 Methods of Sampling and Test for Natural and Synthetic Perfumery Materials – Part IX : Determination of IS 326 : Part 10 : 1980 Methods of sampling and test for natural and synthetic perfumery materials (Part 10) Determination of residue IS 326 : Part 11 : 1986 Methods of test for natural and synthetic perfumery materials (Part 11) Determination of carbonyl value IS 326 : Part 12 : 1980 Methods of sampling and test for natural and synthetic perfumery materials (Part 12) Determination of phenols
    IS 326 : Part XIII : 1981 Methods of Sampling and Test for Natural and Synthetic Perfumery Materials – Part XIII : Determination IS 326 : Part 14 : 1985 Methods of sampling and test for natural and synthetic perfumery materials (Part 14) Determination of heavy IS 326 : Part 15 : 1984 Methods of sampling and test for natural and synthetic perfumery materials (Part 15) Detection of petroleum IS 326 : Part 16 : 1989 Methods of sampling and test for natural and synthetic perfumery materials (Part 16) Determination of melting IS 326 : Part 17 : 1989 Natural and Synthetic Perfumery Materials – Methods of Sampling and Test – Part 17 : Detection of chlorine
    IS 326 : Part 18 : 1984 /ISO 1041 : 1973 Methods of Sampling and Test for Natural and Synthetic Perfumery Materials – Part 18 IS 326 : Part 19 : 1998 Method of Sampling and Test for Natural and Synthetic Perfumery Materials – Part 19 : GAS Chromatograpfilc IS 326 : Part 20 : 1993 Methods of sampling and test for natural and synthetic perfumery materials: Part 20 Determination of boiling IS 326 : Part 21 : 2001 Methods of Sampling and Test for Natural and Sythetic Perfumery Materials – Part 21 : Determination of IS 327 : 1991 Oil of Lemongrass – Specification
    IS 328 : 1992 Oil of eucalyptus globulus – Specification
    IS 329 : 1993 Oil of Sandalwood – Specification
    IS 330 : 1992 Chromium trioxide
    IS 333 : 1980 Potassium permanganate
    IS 334 : 2002 Glossary of Terms Relating to Bitumen and Tar
    IS 335 : 1993 New insulating oils
    IS 336 : 1973 Specification for ether
    IS 337 : 1975 Specification for Varnish, Finishing, Interior
    IS 341 : 1973 Black japan, Types A, B and C
    IS/ISO 342 : 1983 Textile Machinery and Accessories – Worsted and Woollen Cards – Width of Cylinder and Width on the Wire
    IS 344 : 1976 Specification for varnish, stoving
    IS 347 : 1975 Specification for varnish, shellac, for general purposes
    IS 348 : 1968 Specification for French polish
    IS 354 : Part 1 : 1987 Methods of Sampling and Test for Resins for Paints – Part 1 : General Test Methods
    IS 354 : Part 2 : 1986 Methods of sampling and test for resins for paints – Part 2 : Special test methods for alkyd resins
    IS 354 : Part 3 : 1986 Methods of sampling and test for resins for paints – Part 3 : Special test methods for phenolic resins
    IS 354 : Part 4 : 1986 Methods of Sampling and Test for Resins for Paints – Part 4 : Special Test Methods for Epoxy Resins
    IS 354 : Part 5 : 1986 Methods of Sampling and Test for Resins for Paints – Part 5 : Special Test Methods for Polyamide Resins
    IS 354 : Part 6 : 1989 Resins for paints – Methods of sampling and test – Part 6 : Special test methods for amino resins
    IS 354 : Part 7 : 1989 Resins for Paints – Methods of Sampling and Test – Part 7 : Special Test methods for Acrylic and Vinyl Acetate IS 356 : 1991 Ester Gum – Specification
    IS 359 : 1965 Specification for Xylole, Industrial Solvent Grade
    IS 360 : 1964 Specification for Amyl Alcohol
    IS 361 : 1973 Specification for Normal Butyl Alcohol, Technical
    IS 362 : 1991 Specification for parliament hinges
    IS 363 : 1993 Hasps and Staples – Specification
    IS 364 : 1993 Specification for fanlight catch
    IS 365 : 1983 Specification for Electric Hot Plates
    IS 366 : 1991 Electric irons
    IS 367 : 1993 Electric kettles and jugs for household and similar use
    IS 368 : 1992 Specification for Electric Immersion Water Heaters
    IS 369 : 1992 Electric radiators
    IS 371 : 1999 Ceiling Roses – Specification
    IS 374 : 1979 Electric ceiling type fans and regulators
    IS 376 : 1986 Sodium hydroxide, analytical reagent
    IS 380 : 1978 French chalk, technical
    IS 381 : 1995 Sodium silicate – Specifiction
    IS 382 : 1952 Practice for alphabetical arrangement
    IS 383 : 1970 Specification for coarse and fine aggregates from natural sources for concrete
    IS 384 : 2002 Brushes, Paints and Varnishes, Flat – Specification
    IS 388 : 1999 Hydroquinone, photographic grade – Specification
    IS 390 : 1975 Method for determining the water repellency of fabrics by water spray test
    IS 391 : 1975 Method for determining resistance to penetration by water of fabrics by hydrostatic head test
    IS 392 : 1989 Textiles – Determination of water absorbption and penetration of fabrics using Bundesmann type apparatus
    IS 393 : 1985 Ink, stamp-pad
    IS 394 : 1985 Specification for Ink, Cloth Marking
    IS 397 : Part 0 : 1999 Method for Statistical Quality Control During Production – Part 0 : Guidelines for Selection of Control Charts
    IS 397 : Part I : 1972 Method for Statistical Quality Control During Production – Part I : Control Charts for Variables
    IS 397 : Part 2 : 1985 Method for Statistical Quality Control During Production – Part 2 : Control Charts for Attributes and Count IS 397 : Part 3 : 1980 Method for statistical quality control during production:Part 3 Special control charts
    IS 397 : Part 4 : 1987 Method for Statistical Quality Control During Production – Part 4 : Master Control Systems
    IS 398 : Part 1 : 1996 Aluminium conductors for overhead transmission purposes: Part 1 Aluminium stranded conductors
    IS 398 : Part 2 : 1996 Aluminium conductors for overhead transmission purposes: Part 2 Aluminium conductors, galvanized steel IS 398 : Part 3 : 1976 Aluminium conductors for overhead transmission purposes: Part 3 Aluminium conductors, aluminized steel IS 398 : Part 4 : 1994 Aluminium conductors for overhead transmission purposes: Part 4 Aluminium alloy stranded conductors IS 398 : Part 5 : 1992 Aluminium conductors for overhead transmission purposes: Part 5 Aluminium conductors – galvanized steel IS 399 : 1963 Classification of Commercial Timbers and Their Zonal Distribution
    IS 400 : 1968 Specification for the National Flag of India (Wool Khadi)
    IS 401 : 2001 Preservation of Timber – Code of Practice
    IS 402 : 1990 Cold Chisels – Specification
    IS 403 : 1964 Methods of chemical analysis of lead and antimonial lead
    IS 404 : Part 1 : 1993 Lead pipes – Specification – Part 1 : For other than chemical purposes
    IS 404 : Part 2 : 1993 Lead pipes – Specification – Part 2 : For chemical purposes
    IS 405 : Part 1 : 1992 Lead sheets and strips – Specification – Part 1 : For chemical purposes
    IS 405 : Part 2 : 1992 Lead Sheets and Strips – Specification – Part 2 : For other than chemical purposes
    IS 406 : 1964 Methods of chemical analysis of slab zinc (spelter)
    IS 407 : 1981 Specification for Brass Tubes for General Purposes
    IS 408 : 1981 Specification for grease No. 0, graphited
    IS 410 : 1977 Cold rolled brass sheet, strip and foil
    IS 411 : 1991 Titanium dioxide, anatase, for paints – Specification
    IS 412 : 1975 Specification for Expanded Metal Steel Sheets for General Purposes
    IS 413 : 1974 Specification for Round Punches
    IS 414 : 1965 Specification for guts for tennis, badminton and squash rackets
    IS 415 : 2002 Shuttlecocks – Specification
    IS 416 : 1983 Specification for Hockey Balls
    IS 417 : Part 1 : 1974 Specification for footballs, volleyballs, basketballs, netballs, throwballs and water-polo balls – Part 1 : Footballs
    IS 417 : Part 2 : 1986 Specification for footballs, volleyballs, basketballs, netballs, throwballs and water-polo balls – Part 2 : Volleyballs
    IS 417 : Part 3 : 1986 Specification for footballs, volleyballs, basketballs, netballs, throwballs and water-polo balls – Part 3 : Basketballs
    IS 417 : Part IV : 1976 Specification for Footballs, Volleyballs, Basketballs, Netballs, Throwballs and Water-polo Balls – Part IV IS 417 : Part V : 1976 Specification for footballs, volleyballs, basketballs, netballs, throwballs, and water-polo balls – Part V : Throwballs
    IS 417 : Part VI : 1976 Specification for Footballs, Volleyballs, Basketballs, Netballs, Throwballs and Water-polo Balls – Part VI IS 418 : 1978 Tungsten filament general service electric lamps
    IS 419 : 1967 Specification for putty, for use on window frames
    IS 422 : 1981 Specification for Brass Sheet and Strip for the Manufacture of Utensils
    IS 423 : 1961 Specification for plastic wood for joiners filler
    IS 427 : 1965 Specification for distemper, dry, colour as required
    IS 428 : 2000 Washable Distemper – Specification
    IS 430 : 1972 Specification for paint remover, solvent type, non-flammable
    IS 431 : 1972 Specification for paint remover, solvent type, flammable
    IS 432 : Part 1 : 1982 Specification for mild steel and medium tensile steel bars and hard-drawn steel wire for concrete reinforcement: IS 432 : Part 2 : 1982 Specification for mild steel and medium tensile steel bars and hard-drawn steel wire for concrete reinforcement: IS 435 : 1973 Specification for castor oil
    IS 436 : Part II : 1965 Methods for Sampling of Coal and Coke – Part II : Sampling of Coke
    IS 436 : Part 1 : Sec 1 : 1964 – Methods for Sampling of Coal and Coke – Part 1 : Sampling of Coal – Section 1 : Manual Sampling
    IS 436 : Part 1 : Sec 2 : 1976 Methods for sampling of coal and coke: Part I Sampling of Coal/Section 2: Mechanical sampling
    IS 437 : 1979 Size analysis of coal and coke for marketing
    IS 438 : 1972 Specification for aluminium powder for explosive and pyrotechnic compositions
    IS 439 : 1989 Industrial Coke – Specification
    IS 440 : 1964 Indian Standard Methods of chemical analysis of copper
    IS 443 : 1975 Methods of sampling and test for rubber hoses (second revision)
    IS 444 : 1987 General purpose rubber water hose (fourth revision) (Superseding IS 445 : 1964 and IS 913 : 1968)
    IS 446 : 1987 Rubber air hose (fourth revision) (Superseding IS:911:1986 and IS 3557 : 1965)
    IS 447 : 1988 Rubber hose for welding (fourth revision) (Superseding IS : 3572 : 1968)
    IS 451 : 1999 Technical Supply Conditions for Wood Screws
    IS 452 : 1973 Specification for door springs, rat-tail type
    IS 453 : 1993 Specification for double acting spring hinges
    IS 454 : 1994 Cutback bitumen from waxy crude – Specification
    IS 455 : 1989 Specification for Portland slag cement
    IS 456 : 2000 Plain and Reinforced Concrete – Code of Practice
    IS 457 : 1957 Code of practice for general construction of plain and reinforced concrete for dams and other massive structures
    IS 458 : 1988 Specification for Precast Concrete Pipes (with and without Reinforcement)
    IS 459 : 1992 Indian Standard Corrugated and semi-corrugated asbestos cement sheets – Specification
    IS 460 : Part 1 : 1985 Specification for test sieves: Part I Wire cloth test sieves
    IS 460 : Part 2 : 1985 Specification for test sieves: Part II Perforated plate test sieves
    IS 460 : Part 3 : 1985 Specification for test sieves: Part III Methods of examination of apertures of test sieves
    IS 482 : 1981 Specification for Reels for Covered Round Electrical Winding Wires
    IS 483 : 1972 Specification for Fireclay Refractories for Oil-fired Boiler Furnaces of Naval Ships
    IS 484 : 1980 Specification for Silica Refractories for General Purposes
    IS 486 : 1983 Specification for Brushes, Sash Tool, for Paints and Varnishes
    IS 487 : 1997 Brushes, Paint and Varnish – (i) Oval, Ferrule Bound; and (ii) Round, Ferrule Bound
    IS 488 : 1980 Specification for Glass Making Sands
    IS 489 : Part I : 1973 Specification for Glass Ampoules – Part I : Ampoules for Liquid Injectables
    IS 489 : Part II : 1973 Specification for Glass Ampoules – Part II : Ampoules for lyophilized injectable
    IS 493 : Part I : 1981 Specification for General Purpose Machinery and Spindle Oils – Part I : Machinery Oils
    IS 493 : Part II : 1981 Specification for General Purpose Machinery and Spindle Oils – Part II : Spindle Oils
    IS 494 : 1970 Indian Standard Specification for aluminium stearate for lubricants
    IS 495 : 1967 Specification for graphite, flake for lubricants
    IS 498 : 1985 Grading for vacuum pan sugar (Plantation white)
    IS 500 : 1999 Potassium metabisulphite, photographic grade – Specification
    IS 501 : 1976 Specification for Oxalic Acid, Technical and Analytical Reagent
    IS 504 : 1963 Methods of Chemical Analysis of Aluminium and its Alloys
    IS 504 : Part 1 to 12 : 2002 Chemical Analysis of Aluminium and its Alloys — Parts 1 to 12
    IS 504 : Part 13 to 16 : 2003 Chemical Analysis of Aluminium and its Alloys – Part 13 To 16
    IS 505 : 1995 Light kaolin – Specification
    IS 506 : 1993 Specification for automotive grease (superseding IS : 509 : 1953)
    IS 507 : 1993 Specification for general purpose grease
    IS 508 : 1987 Specification for grease, graphited
    IS 510 : 1986 Specification for Blacksmith’s Anvils
    IS 512 : 1988 Specification for Oil of Citronella (Java)
    IS 513 : 1994 Cold-rolled low carbon steel sheets and strips
    IS 514 : 1992 Textiles – Mercerized cotton fabrics for covering aircrafts and gliders – Specification (superseding IS 596, IS 598 and IS 516 : 1959 Method of test for`strength of concrete
    IS/IEC 517 : 1990 Gas Insulated Metal Enclosed Switchgear for Rated Voltages of 72.5 kV and above – Specification
    IS 517 : 1986 Specification for Methanol (Methyl Alcohol)
    IS/IEC 519-1 : 1984 Safety in Electroheat Installation – Part 1 : General Requirements
    IS/IEC 519-3 : 1988 Safety in Electroheat Installations – Part 3 : Particular Requirements for Induction and Conduction Heating IS/IEC 519-5 : 1980 Safety in Electroheat Installation – Part 5 : Specification for Safety in Plasma Installation
    IS/IEC 519-9 : 1987 Safety in Electroheat Installations – Part 9 : Particular Requirements for High-frequency Dielectric Heating IS 524 : 1983 Specification for Varnish, Finishing, Exterior, Air-drying
    IS 525 : 1968 Specification for Varnish, Finishing, Exterior and General Purposes
    IS 526 : 1988 Specification for Oil of Palmarosa
    IS 528 : 1999 Oil of Mentha Arvensis – Specification
    IS 530 : 1976 Specification for solid-woven impregnated hair belting for power transmission
    IS 531 : 1981 Leaded brass strips for instrument parts
    IS 532 : 1979 Specification for Bicycle Tube Valves
    IS 533 : 1998 Gum spirit of turpentine (oil of turpentine)
    IS 534 : 1992 Benzene – Specification
    IS 536 : 1968 Specification foe Toluole, Industrial
    IS 537 : 1967 Specification for Toluene, Pure, Nitration Grade
    IS 538 : 2000 Phenol (Carbolic Acid) – Specification
    IS 539 : 1974 Specification for Naphthalene
    IS 540 : 1968 Specification for Refined Cresylic Acid
    IS 542 : 1968 Specification for coconut oil
    IS 543 : 1968 Specification for Cottonseed Oil
    IS 544 : 1968 Specification for Groundnut Oil
    IS 545 : 1984 Specification for MAHUA Oil
    IS 546 : 1975 Specification for mustard oil
    IS 547 : 1968 Specification for Sesame Oil
    IS 548 : Part 1 : 1964 Methods of sampling and test for oils and facts: Part I Methods of sampling, physical and chemical tests
    IS 548 : Part 2 : 1976 Methods of sampling and test for oils and fats: Part II Purity tests
    IS 548 : Part 2 : Sec 9 : 1988 Methods of sampling and test for oils and fats: Part II Purity tests Sec 9 Test for presence of Karanja IS 548 : Part 2 : Sec 20 : 1983 Methods of Sampling and Tests for Oils and Fats – Part 2 : Purity Tests – Section 20 : Test for Detection IS 548 : Part 2 : Sec 21 : 1988 Methods of sampling and test for oils and fats: Part II Purity tests: Sec 21 Test for detection of animals IS 548 : Part 2 : Sec 22 : 1993 Methods of sampling and test for oils and fats: Part 2 Purity test – Section 22 Detection of tricresyl IS 548 : Part III : 1976 Methods of Sampling and Test for Oils and Fats – Part III : Analysis by Gas Liquid Chromatography
    IS 549 : 1974 Specification for Split Pins
    IS 550 : Part 1 : 1991 Safes: Part 1 Specification
    IS 550 : Part 2 : 1991 Safes – Part 2 : Tests for Burglary Resistance
    IS 550 : Part 3 : 1991 Safes, Part 3 Tests for fire resistance
    IS 551 : 1989 Bonded abrasive products (other than diamond/cubic boron nitride) – Marking system
    IS 552 : 1965 Specification for Smith Bits
    IS 553 : 1984 Specification for Rosin (Gum Rosin)
    IS 554 : 1999 /ISO 7-1 : 1994 Pipe Threads Where Pressure-Tight Joints are Made on the Threads – Dimensions, Tolerances and IS 555 : 1979 Specification for Electric Table Type Fans Regulators
    IS 557 : 1988 Sodium acetate, photographic grade
    IS 563 : 1973 Specification for DDT, Technical
    IS 565 : 1984 Specification for DDT Water Dispersible Powder Concentrates
    IS 566 : 1984 Disodium phosphate, dodecahydrate
    IS 567 : 1993 Disodium phosphate, anhydrous
    IS 570 : 1964 Methods for determination of universal count of jute yarn
    IS 571 : 2000 Monosodium Phosphate – Specification
    IS 573 : 1992 Trisodium phosphate
    IS/ISO 574 : 1979 Textile Machinery and Accessories – Perforated Cylindrical Tubes for Cheese Dyeing
    IS 574 : 1989 Glassy sodium metaphosphate, technical
    IS 575 : 1956 Specification for Chrome Belt Lace Leather
    IS 576 : 1989 Leather – Glazed Kid for Shoe Uppers – Specification
    IS 577 : 1986 Specification for Upholstery Leather
    IS 578 : 1985 Specification for Full-Chrome Upper Leather
    IS 579 : 1996 Vegetable tanned sole leather – Specification
    IS 580 : 1973 Specification for Harness Leather
    IS 581 : 1976 Specification for Vegetable Tanned Hydraulic Leather
    IS 582 : 1970 Methods of Chemical Testing of Leather
    IS 583 : 1994 Ankle boots for heavy duty purposes – Specification
    IS 586 : 1976 Leclanche type dry batteries for telecommunications,signalling and general purposes
    IS 587 : 1997 Oil of Geranium – Specification
    IS 590 : 1964 Specification for Fixed Paper Dielectric Capacitors for DC
    IS 593 : 1978 Salt for hide-curing (wet salting)
    IS 594 : 1981 Common salt for fish curing
    IS 595 : 1954 Specification for Blown Rape (or Mustard) Oil for use in Lubricants
    IS 609 : 1955 Code of Practice for Improvement of Existing Structures Used or Intended to be Used for Food Grain Storage
    IS 612 : 1992 Roasted Chicory Powder – Specification
    IS 613 : 2000 Copper Rods and Bars for Electrical Purposes – Specification
    IS 615 : 1996 Radio receivers for amplitude modulation broadcast transmission – Specification
    IS 616 : 2003 /IEC 60065 : 2001 Audio, Video and Similar Electronic Apparatus – Safety Requirements
    IS 617 : 1994 Aluminium and aluminium alloy ingots and castings for general engineering purposes (Superseded IS 20:1977)
    IS 619 : 1979 Specification for Pruning and Slashing Knives, Hooked and Curved
    IS 620 : 1985 Specification for wooden tool handles general requirements
    IS 622 : 1956 Specification for russet leather
    IS 623 : 1993 Bicycle frames – Specification
    IS 624 : 1991 Bicycles – Rims – Specification
    IS 625 : 1993 Bicycle handle bars – Specification
    IS 626 : 1979 Specification for Bicycle Seat Pillars
    IS 628 : 1993 Bicycles – Pedal assembly – Specification
    IS 629 : 1988 Bicycle hub assembly R-Type
    IS 630 : 1982 Specification for Bicycle Spokes (Plain) and Nipples for Spokes
    IS 631 : 1979 Specification for Outdoor Aluminium Foodgrain Storage Bins
    IS 632 : 1978 Specification for Gamma-BHC (Lindane) Emulsifiable Concentrates
    IS 633 : 1985 Specification for DDT Emulsifiable Concentrates
    IS 634 : 1965 Specification for Ethylene Dichloride-carbon Tetrachloride Mixture (3 : 1 v/v)
    IS 635 : 1982 Specification for Oil and Solvent Resistant Hose of Rubber
    IS 636 : 1988 Non-percolating flexible fire fighting delivery hose (third revision)
    IS 637 : 1994 Rubber tubings for general purposes – Specification (Second revision)
    IS 638 : 1979 Specification for Sheet Rubber Jointing and Rubber Insertion Jointing
    IS 639 : 1982 Specification for Gold Leaf
    IS 642 : 1963 Specification for Varnish Medium for Aluminium Paint
    IS 643 : 1955 Cyclohexane (Hexahydro Benzene) for Paints
    IS 644 : 1992 Dipentene for Paints – Specification
    IS 646 : 1986 Liquid chlorine, technical
    IS 647 : 1965 Methods for determining the desizing efficiency and the relative efficiency of amylolytic enzymes
    IS 648 : 1994 Non-oriented electrical steel sheets and strips for magnetic circuits
    IS 649 : 1997 Methods for testing steel sheets for magnetic circuits of power electrical apparatus
    IS 650 : 1991 Specification for standard sand for testing of cement
    IS 651 : 1992 Specification for salt glazed stoneware pipe and fittings
    IS 652 : 1960 Specification for wooden separators for lead-acid storage batteries
    IS 653 : 1992 Specification for linoleum sheets and tiles
    IS 654 : 1992 Specification for clay roofing tiles, mangalore pattern
    IS 655 : 1963 Specification for Metal Air Ducts
    IS 656 : 1988 Specification for logs for plywood
    IS 657 : 1982 Specification for materials for use in the manufacture of magnesium oxychloride flooring compositions
    IS 658 : 1982 Code of practice for magnesium oxychloride composition floors
    IS 659 : 1964 Safety code for air conditioning
    IS 660 : 1963 Safety code for mechanical refrigeration
    IS 661 : 2000 Thermal Insulation of Cold Storage – Code of Practice
    IS 662 : 1980 Anhydrous ammonia
    IS 663 : 1980 Specification for Adzes
    IS 665 : 1989 Textiles – Determination of dimensional changes of fabrics containing wool on soaking in water
    IS 666 : Part I : 1972 Specification for Jig Bushes – Part I : Headed and Headless Jig Bushes
    IS 666 : Part 2 : 1972 Specification for Jig Bushes – Part 2 : Renewable Drill Bushes
    IS 667 : 1981 Methods for Identification of Textile Fibres
    IS 673 : 1987 Specification for Cloth, Woollen, Twill, Dyed
    IS 674 : 1987 Specification for Flannel, Hospital, Grey
    IS 675 : 1973 Specification for Bunting, Worsted
    IS 677 : 1974 Cloth, drab-mixture, woollen, water-resistant
    IS 679 : 1993 Textiles – Great coat cloth – Specification
    IS 680 : 1993 Textiles – Cloth, barathea – Specification
    IS 681 : 1964 Methods for determination of universal count of woollen and worsted yarn
    IS 684 : 1962 Method for determination of nep count in cotton
    IS 686 : 1985 Method for determination of colour fastness of textile materials to daylight
    IS 687 : 1979 Method for determination of colour fastness of textile materials to washing: Test 1
    IS 688 : 1988 Method for determination of colour fastness of textile materials to organic solvents
    IS 689 : 1988 Method for determination of colour fastness of textile materials to hot pressing
    IS 690 : 1988 Method for Determination of Colour Fastness of Textile Materials to Sea Water
    IS/IEC Pub 691 : 1993 Thermal Links – Requirements and Application Guide
    IS 692 : 1994 Paper insulated lead-sheathed cables for rated voltage upto and including 33 kv specification
    IS 694 : 1990 PVC Insulated cables for working voltages upto and including 1100 V
    IS 695 : 1986 Specification for acetic acid
    IS 697 : 1963 Specification for Woollen Druggets
    IS 698 : 1970 Specification for Picking Sticks (Arms) for Overpick Jute Looms
    IS 699 : Part 1 : 1993 Textile machinery and accessories – Cross wound spool centres for jute winding machines – Specification IS 699 : Part 2 : 1993 Textile machinery and accessories – Cross wound spool centres for jute winding machines – Specification IS 701 : 1966 Specification for Zinc Chloride
    IS 702 : 1988 Specification for industrial bitumen
    IS 703 : 1966 Specification for Axes
    IS 704 : 1984 Specification for Crow-bars and Claw-bars
    IS 707 : 1976 Glossary of terms applicable to timber technology and utilization
    IS 708 : 1987 Specification for potassium chlorate for explosive and pyrotechnic industry
    IS 709 : 1974 Specification for medium strength aircraft plywood
    IS 710 : 1976 Specification for Marine Plywood
    IS 711 : 1970 Ferric chloride, technical
    IS 712 : 1984 Specification for building limes
    IS 713 : 1981 Zinc base alloy ingots for die casting
    IS 714 : 1992 Textiles-Cotton Reinforcing Tapes for Aerospace Purposes – Specification
    IS 715 : 2002 Coated Abrasives – Specification
    IS 715 : Part I : 1976 Specification for Coated Abrasives – Part 1 : General Applications
    IS 715 : Part II : 1976 Specification for Coated Abrasives – Part II : Special and Mechanized Applications
    IS 717 : 1998 Carbon Disulphide, Technical – Specification
    IS 718 : 1977 Specification for Carbon Tetrachloride
    IS 719 : 1990 Specification for antifriction bearing grease (superseding IS : 1276 : 1958)
    IS 720 : 1986 Specification for Locomotive Greases
    IS 723 : 1972 Specification for Steel Countersunk Head Wire Nails
    IS 724 : 1964 Specification for Mild Steel and Brass Cup, Ruler and Square Hooks and Screw Eyes
    IS 725 : 1961 Specification for Copper Wire Nails
    IS 726 : 1982 Galvanized steel buckets for general use – Specification
    IS 729 : 1979 Specification for drawer locks, cupboard locks and box locks
    IS 730 : 1978 Specification for Hook Bolts for Corrugated Sheet Roofing
    IS 731 : 1971 Porcelain insulators for overhead power lines with a nominal voltage greater than 1000 V
    IS 732 : 1989 Code of Practice for Electrical Wiring Installations
    IS 733 : 1983 Specification for Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections (for General Engineering Purposes)
    IS 734 : 1975 Wrought aluminium and aluminium alloys,forging stock and forgings for general engineering purposes
    IS 736 : 1986 Wrought aluminium and aluminium alloy plate for general engineering purposes
    IS 737 : 1986 Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes
    IS 738 : 1994 Wrought aluminium alloys, drawn tube for general engineering purposes
    IS 739 : 1992 Wrought aluminium and aluminium alloy wire for general engineering purposes
    IS 740 : 1977 Wrought aluminium and aluminium alloy rivet stock for general engineering purposes
    IS 741 : 1971 Code for Inland Packaging of Woollen and Worsted Yarn and Cloth
    IS 742 : 1981 Zinc base alloy die castings
    IS 744 : 2000 Textiles – Methods for Determination of Wool Fibre Diameter, Percentage of Medullated Fibres and Kemp Fibre
    IS 745 : 1990 Handloom Cotton Bed Sheets – Specification
    IS 746 : 1987 Handloom cotton blankets, grey or coloured
    IS 747 : 1991 Handloom Cotton Bunting Cloth, Dyed – Specification
    IS 748 : 1990 Handloom Cotton Dhoties and Saris – Specification
    IS 749 : 1978 Specification for Handloom Cotton Dungri Cloth
    IS 750 : 1976 Specification for Handloom Cotton Lungies
    IS 751 : 1984 Specification for Handloom Cotton Cloth Mazri (Loomstate)
    IS 752 : 1984 Specification for Handloom Cotton Muslin, Bleached
    IS 753 : 1983 Specification for Handloom Cotton Pugri Cloth, Bleached or Dyed
    IS 755 : 1984 Specification for Handloom Cotton Malmal
    IS 756 : 1984 Specification for Handloom Cotton Dosuti and Ded-suti, Grey, Scoured, Bleached or Dyed.
    IS 757 : 1971 Specification for Handloom Cotton Lint, Absorbent, Bleached
    IS 758 : 1988 Specification for Handloom Cotton Gauze, Absorbent, Non-Sterilized
    IS 759 : 1988 Specification for Blanks for Swells of Jute Looms
    IS 761 : 1988 Specification for Oil of Ginger
    IS 762 : 1988 Method for determination of colour fastness of textile materials to hypochlorite bleaching
    IS 763 : 1988 Method for determination of colour fastness of textile materials to peroxide bleaching
    IS 764 : 1979 Method for determination of colour fastness of textile materials to washing: Test 3
    IS 765 : 1979 Method for determination of colour fastness of textile materials to washing: Test 4
    IS 766 : 1988 Method for determination of colour fastness of textile materials to rubbing
    IS 767 : 1988 Method for determination of colour fastness of textile materials to water
    IS 768 : 1982 Method for evaluating change in colour
    IS 769 : 1982 Method for evaluating staining
    IS 770 : 1977 Classification and Codification of Indian Coals and Lignites
    IS 771 : Part 1 : 1979 Specification for glazed fire-clay sanitary appliances: Part 1 General requirements
    IS 771 : Part 2 : 1985 Specification for glazed fire-clay sanitary appliances: Part 2 Specific require ments of kitchen and laboratory IS 771 : Part 3 : Sec 1 : 1979 Specification for glazed fire clay sanitary appliances : Part 3 Specific requirements of urinals, Section IS 771 : Part 3 : Sec 2 : 1985 Specification for glazed fire-clay sanitary appliances: Part 3 Specific requirements of urinals: Section IS 771 : Part 4 : 1979 Specification for glazed fire-clay sanitary appliances: Part 4 Specific requirements of postmortom slabs
    IS 771 : Part V : 1979 Specification for Glazed Fire-clay Sanitary Appliances – Part V : Specific Requirements of Shower Trays
    IS 771 : Part VI : 1979 Specification for Glazed Fire-clay Sanitary Appliances – Part VI : Specific Requirements of Bed Pan Sinks
    IS 771 : Part 7 : 1981 Specification for glazed fire-clay sanitary appliances: Part 7 Specific requirements of slop sinks
    IS 772 : 1973 Specification for general requirements for enamelled cast iron sanitary appliances
    IS 773 : 1988 Specification for enamelled cast iron water-closets railway coaching stock type
    IS 774 : 1984 Specification for flushing cistern for water closets and urinals (other than plastic cistern)
    IS 775 : 1970 Specification for cast iron brackets and supports for wash basins and sinks
    IS 778 : 1984 Specification for Copper Alloy Gate, Globe and Check Valves for Waterworks Purposes
    IS 779 : 1994 Specification for water meters (domestic type)
    IS 781 : 1984 Specification for cast copper alloy screw down bib taps and stop valves for water services
    IS 782 : 1978 Specification for caulking lead
    IS 783 : 1985 Code of practice for laying of concrete pipes
    IS 784 : 2001 Prestressed Concrete Pipes (Including Fittings) – Specification
    IS 785 : 1998 Reinforced Concrete Poles for Overhead Power and Telecommunication Lines – Specification
    IS 786 : 1967 Conversion Factors and Conversion Tables
    IS 787 : 1956 Guide for inter conversion of values from one system of units to another
    IS 788 : 1971 Specification for Ink, Drawing, Waterproof, Coloured
    IS 789 : 1971 Ink, drawing, waterproof, black
    IS/ISO 789-8 : 1991 Agricultural Tractors – Test Procedures – Part 8 : Engine Air Cleaner
    IS 790 : 1987 Guidelines for preliminary pages of a book (superseding IS 791 : 1956, IS 792 : 1964 and IS 794 : 1956)
    IS 795 : 1976 Guide for preparation of abstracts
    IS 796 : 1966 Glossary of cataloguing terms
    IS 797 : 1982 Common salt for chemical industries
    IS 798 : 1986 Ortho-phosphoric acid
    IS 799 : 1985 Ammonia, liquor
    IS 800 : 1984 Code of practice for general construction in steel
    IS 801 : 1975 Code of practice for use of cold formed light gauge steel structural members in general building construction
    IS 802 : Part 1 : Sec 1 : 1995 Code of practice for use of structural steel in overhead transmission line towers, Part 1 Materials IS 802 : Part 1 : Sec 2 : 1992 Code of practice for use of structural steel in overhead transmission line towers Part 1 : Material, IS 802 : Part II : 1978 Code of Practice for Use of Structural Steel in Overhead Transmission Line Towers – Part II : Fabrication, IS 802 : Part 3 : 1978 Code of practice for use of structural steel in overhead transmission line towers, part 3 Testing
    IS 803 : 1976 Code of Practice for Design Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks
    IS 804 : 1967 Rectangular pressed steel tanks
    IS 805 : 1968 Code of Practice for Use of Steel in Gravity Water Tanks
    IS 806 : 1968 Code of practice for use of steel tubes in general building construction
    IS 807 : 1976 Code of practice for design, manufacture, erection and testing (structural portion) of cranes and hoists
    IS 808 : 1989 Dimensions for Hot Rolled Steel Beam, Column, Channel and Angle Sections
    IS 809 : 1992 Specification for rubber flooring materials for general purposes
    IS 810 : 1991 Internal Combustion Engines – Engine Valves – Specification
    IS 811 : 1987 Cold formed light gauge structural steel sections
    IS 812 : 1957 Glossary of terms relating to welding and cutting of metals
    IS 813 : 1986 Scheme of symbols for welding
    IS 814 : 1991 Covered electrodes for manual metal arc welding of carbon and carbon manganese steel
    IS 816 : 1969 Code of practice for use of metal arc welding for general construction in mild steel
    IS 817 : 1966 Code of practice for training and testing of metal arc welders
    IS 817 : Part 1 : 1992 Training of Welders – Code of Practice: Part 1 Manual metal arc welding
    IS 817 : Part 2 : 1996 Training of Welders – Code of Practice: Part 2 Oxyfuel welding
    IS 818 : 1968 Code of Practice for Safety and Health Requirements in Electric and Gas Welding and Cutting Operations
    IS 819 : 1957 Code of Practice for Resistance Spot Welding for Light Assemblies in Mild Steel
    IS 822 : 1970 Code of procedure for inspection of welds
    IS 824 : 1965 Preferred Values for Resistors and Capacitors
    IS 826 : 1980 Specification for Ammonium Sulphate, Fertilizer Grade
    IS 827 : 1966 Specification for Sinew Guts for Tennis and Badminton Rackets
    IS 828 : 1979 Specification for Cricket Bats
    IS 829 : 1978 Specification of Hockey Sticks
    IS 830 : 1985 Specification for Tennis Racket Frames
    IS 831 : 1979 Specification for Badminton Racket Frames
    IS 832 : 1985 Methods for Determination of Twist in Yarn
    IS 833 : 1977 Specification for Gents’ Rib-Knitted Nylon Stockings
    IS 834 : 1993 Textiles- Ring Spun Grey Cotton Yarn for Hosiery – Specification
    IS 835 : 1978 Specification for Bottom Shaft for Cotton Looms
    IS 837 : 1982 Specification for Doffer and Flat Stripping Comb Blades
    IS 838 : 1976 Specification for Tin Rollers for Cotton Ring Spinning Frames
    IS 840 : 1986 Specification for Cashewnut Shell Liquid (CNSL)
    IS 841 : 1983 Specification for Steel Hammers
    IS 842 : 1968 Specification for Smith’s Swages
    IS 843 : 1968 Specification for Smith’s Tongs
    IS 844 : Part 1 : 1979 Specification for Screwdrivers – Part 1 : Technical Supply Conditions
    IS 844 : Part II : 1979 Specification for Screwdrivers – Part II : Dimensions
    IS 844 : Part III : 1979 Specification for Screw Drivers – Part III : Dimensions for Screw Drivers for Recessed Head Screws
    IS 845 : 1974 Specification for Swage Blocks and Stands
    IS 846 : 1968 Specification for Smith’s Flatters
    IS 847 : 1968 Specification for Smith’s Fullers
    IS 848 : 1974 Specification for Synthetic Resin Adhesives for Plywood (Phenolic and Aminoplastic)
    IS 849 : 1994 Specification for cold setting case in glue for wood
    IS 850 : 1994 Specification for natural sour (lactic) casein for glue manufacture
    IS 851 : 1978 Specification for synthetic resin adhesives for construction work (non-structural) in wood
    IS 852 : 1994 Specification for animal glue for general wood-working purposes
    IS 853 : 1964 Specification for Bone-meal, Raw
    IS 854 : 1991 Handloom cotton turkish, honeycomb and huckaback towels and towelling cloth – Specification (Amalgamating IS IS 858 : 1981 Specification for Handloom Cotton Table Cloth and Napkins
    IS 859 : 1978 Specification for Handloom Cotton Dusters
    IS 860 : 1987 Specification for Handloom Cotton Sponge Cloth, Grey, Striped or Checked
    IS 862 : 1990 Handloom Cotton Ticking Cloth – Specification
    IS 863 : 1988 Specification for Handloom Cotton Bandage Cloth, Non-Sterilized
    IS 864 : 1990 Handloom Cotton Light Sheeting – Specification
    IS 865 : 1958 Method for Determination of Colour Fastness of Textile Materials to Decatizing
    IS 866 : 1957 Specification for Tinmen’s Rivets
    IS 867 : 1963 Methods of test for phenolic moulding materials
    IS 868 : 1990 Sealing Wax – Specification
    IS 869 : 1976 Specification for ethylene dichloride
    IS 873 : 1974 Specification for Liquid Glucose
    IS 874 : 1992 Dextrose Monohydrate – Specification
    IS 875 : Part 1 : 1987 Code of practice for design loads (other than earthquake)for buildings and structures Part 1 Dead loads – IS 875 : Part 2 : 1987 Code of practice for design loads (other than earthquake) for buildings and structurres: Part 2 Imposed loads
    IS 875 : Part 3 : 1987 Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures – Part 3 : Wind Loads
    IS 875 : Part 4 : 1987 Code of practice for design loads (other than earthquake) for buildings and structures Part 4 Snow loads
    IS 875 : Part 5 : 1987 Code of practice for design loads (other than earthquake) for buildings and structures Part 5 Special loads IS 876 : 1992 Specification for wood poles for overhead power and telecommunication lines
    IS 877 : 1989 Methods of sampling and test for activated carbons, powdered and granular
    IS 878 : 1975 Graduated measuring cylinders
    IS 879 : 1981 Sodium nitrite
    IS 880 : 1956 Specification for Tartaric Acid
    IS 882 : 1984 Specification for Lindane
    IS 883 : 1994 Code of practice for design of structural timber in building
    IS 884 : 1985 Specification for first-aid hose reel for fire fighting
    IS 885 : 1994 Common Names for Pesticides and other Agrochemicals (Excluding Fertilizers)
    IS 887 : 1977 Specification for Animal Tallow
    IS 888 : 1983 Specification for Hollow-ground Razors, Open Type
    IS 889 : 1991 Handloom worsted bunting cloth (amalgamating IS 890:1957)
    IS 891 : 1991 Handloom worsted shirting
    IS 892 : 1980 Specification for Handloom Wool Blankets, Natural Grey/ Brown
    IS 893 : 1991 Handloom woollen blankets, plain or check
    IS 894 : 1980 Specification for Handloom Wool Blankets Brick Red
    IS 895 : 1991 Handloom woollen blanketing cloth
    IS 896 : 1991 Handloom woollen kamblies, loomstate
    IS 897 : 1982 Tungsten filament electric lamps for railway rolling stock
    IS 898 : 1985 Specification for Retted Coir Fibre
    IS 899 : 1971 Specification for Tapioca Sago (Saboodana)
    IS 900 : 1992 Code of practice for installation and maintenance of induction motors
    IS 901 : 1988 Specification for couplings, double male and double female, instantaneous pattern for fire fighting
    IS 902 : 1992 Specification for suction hose couplings for fire fighting purposes
    IS 903 : 1993 Specification for fire hose delivery couplings, branch pipe, nozzles and nozzle spanner
    IS 904 : 1983 Specification for 2-way and 3-way suction collecting heads for fire fighting purposes
    IS 905 : 1980 Specification for delivery breechings, dividing and collecting instantaneous pattern for fire fighting purposes
    IS 906 : 1988 Specification for revolving branch pipe for fire fighting
    IS 907 : 1984 Specification for suction strainers, cylindrical type for fire fighting purposes
    IS 908 : 1975 Specification for Fire Hydrant, Stand Post Type
    IS 909 : 1992 Specification for underground fire hydrant, sluice valve type
    IS 910 : 1980 Specification for combined key for hydrant, hydrant cover and lower valve
    IS 915 : 1975 One-mark volumetric flasks
    IS 916 : 2000 Square Tins for Solid Products – Specification
    IS 917 : 1976 Specification for Activated Calcium Carbonate for Rubber Industry
    IS 918 : 1985 Calcium Specification for Carbonate, Precipitated for Cosmetic Industry
    IS 919 : Part 1 : 1993/ISO 286-1 : 1988 ISO Systems of limits and fits Part 1 Bases of tolerance, deviations and fits
    IS 919 : Part 2 : 1993/ISO 286-2 : 1988 ISO systems of limits and fits Part 2 Tables of standard tolerance grades and limit deviations IS 920 : 1972 Specification for Common Salt and Cattle Licks for Animal Consumption
    IS 921 : 1965 Specification for Butcher’s Knives
    IS 922 : 1965 Specification for Cook’s Knives
    IS 923 : 1965 Specification for Carving Knives
    IS 924 : 1965 Specification for Bread Knives
    IS 925 : 1966 Specification for Pocket Knives
    IS 926 : 1985 Specification for Fireman’s Axe
    IS 927 : 1981 Specification for Fire Hooks
    IS 928 : 1984 Specification for Fire Bells
    IS 937 : 1981 Specification for washers for water fittings for fire fighting purposes
    IS 939 : 1977 Specification for Snatch Block for Use with Fibre Rope for Fire Brigade Use
    IS 940 : 2003 Portable Fire Extinguisher, Water Type (Gas Cartridge) – Specification
    IS 941 : 1985 Specification for Blower and Exhauster for Fire Fighting
    IS 942 : 1982 Functional Requirements for 275 1/Min Portable Pump Set for Fire Fighting
    IS 943 : 1979 Functional requirements for 680-1/min trailer pump for fire brigade use
    IS 944 : 1979 Functional requirements for 1800-1/min trailer pump for fire brigade use
    IS 947 : 1985 Functional Requirements for Towing Tender for Trailer Fire Pump for Fire Brigade Use
    IS 948 : 1983 Functional Requirements for Water Tender Type `A’ for Fire Brigade Use
    IS 949 : 1985 Functional Requirements for Emergency (Rescue) Tender for Fire Brigade Use
    IS 950 : 1980 Functional Requirements for Water Tender, Type B for Fire Brigade Use
    IS 951 : 1987 Functional Requirements for Crash Fire Tender for Airfields
    IS 952 : 1986 Specification for Fognozzle for Fire Brigade Use
    IS 955 : 1980 Functional Requirements for Dry Powder Tender for Fire Brigade Use
    IS 956 : 1975 Functional requirements for rescue tender for air fields
    IS 957 : 1967 Specification for Control Van for Fire Brigade Use
    IS 958 : 2000 Temporary Corrosion Preventives, Grease Type, Soft Film – Specification
    IS 959 : 1994 Electric soldering irons
    IS 960 : 1969 Specification for Bicycles Rim Tapes and Buckles
    IS 962 : 1989 Code of practice for architectural and building drawings
    IS 963 : 1958 Chrome molybdenum steel bars and rods for aircraft purposes
    IS 964 : 1956 Methods for chemical analysis of silver solder
    IS 965 : 1963 Specification for equivalent metric units for scales dimensions and quantities in general construction work
    IS 966 : 1999 Desiccated Coconut – Specification
    IS 967 : 1956 Method for determination of colour fastness of textile materials to acid chlorination
    IS 969 : 1956 Method for Determination of Colour Fastness of Textile Materials to Cross-Dyeing : Wool
    IS 970 : 1988 Method for Determination of Colour Fastness Textile Materials to Degumming
    IS 971 : 1983 Method for determination of colour fastness of textile materials to perspiration
    IS 972 : 1988 Method for determination of colour fastness of textile materials to potting
    IS 973 : 1988 Method for determination of colour fastness of textile materials to soda boiling
    IS 974 : 1984 Method for Determination of Colour Fastness of Textile Materials to Steaming Under Atmospheric Pressure
    IS 975 : 1988 Methods for determination of colour fastness of textile materials to sublimation
    IS 978 : 1988 Method for Determination of Colour Fastness of Textile Materials to Carbonizing with Sulphuric Acid
    IS 979 : 1988 Method for determination of colour fastness of textile materials to mercerizing
    IS 980 : 1980 Method for determination of colour fastness of textile materials to stoving
    IS 981 : 1988 Method for determination of colour fastness of textile materials to acid milling
    IS 983 : 1980 Method for Determination of Colour Fastness of Textile Materials to Alkaline Milling
    IS 984 : 1988 Method for Determination of Colour Fastness of Textile Materials to Washing in the Presence of Sodium Hypochlorite
    IS 987 : 1988 Methods for determination of colour fastness of textile materials to bleaching with sodium chlorite
    IS 988 : 1959 General requirements for optical components
    IS 989 : 1982 Specification for Scissors for General Purposes
    IS 990 : 1982 Specification for Spoons, Stainless Steel
    IS 991 : 1964 Specification for Spoons, Brass and Nickel Silver
    IS 992 : 1964 Specification for Forks (Table, Fish, Pastry and Serving), Stainless Steel
    IS 993 : 1964 Specification for Forks (Table, Fish, Pastry and Serving) Brass and Nickel Silver
    IS 994 : 1964 Specification for Butter Knives and Fish Knives
    IS 995 : 1982 Specification for Table Knives, Dessert Knives and Fruit Knives
    IS 996 : 1979 Single-phase small ac and universal electric motors
    IS 997 : 1973 Specification for Limestone and Dolomite for Glass Industry
    IS 998 : Part 1 : 1983 Methods of chemical analysis of solders (soft and rosin cored) Part 1 Determination of tin and antimony
    IS 998 : Part 2 : 1983 Methods of chemical analysis of solders (soft and rosin cored) Part 2 Determination of iron,copper and arsenic
    IS 998 : Part 3 : 1983 Methods of chemical analysis of solders (soft and rosin cored) Part 3 Determination of cadmium, zinc, aluminium, IS 999 : 1959 Methods of Chemical Analysis of Brazing Solder
    IS 1000 : 1989 Milk and Milk Products – Lactose Commercial – Specification
    ISI Handbook of Manual Metal-arc Welding for Welders
    IS QC 001001 : 2000/IEC QC 001001 : 1998 IEC Quality Assessment System for Electronic Components (IECQ) – Basic Rules
    IS 1001 : 1991 Synthetic Rubber Proofed/Coated Fuel Pump Diaphragm Fabric – Specification
    IS QC 001002 : 1988 /IEC QC 001002 : 1986 Rules of Procedure of the IEC Quality Assessment System for Electronic Components IS QC 001002 : Part 1 : 2000/IEC QC 001002-1 : 1998 IEC Quality Assessment System for Electronic Components (IECQ) – Rules
    IS QC 001002 : Part 2 : 2000/IEC QC 001002-2 : 1998 IEC Quality Assessment System for Electronic Components (IECQ) – Rules IS QC 001002 : Part 3 : 2000/IEC QC 001002-3 : 1998 IEC Quality Assessment System for Electronic Components (IECQ) – Rules IS QC 001003 : 2000/IEC QC 001003 : 1998 IEC Quality Assessment System for Electronic Components (IECQ) – Guidance Documents
    IS 1003 : Part 1 : 1991 Specification for timber panelled and glazed shutters: Part 1 Door Shutters
    IS 1003 : Part 2 : 1994 Specification for timber panelled and glazed shutters: Part 2 Window ventilator shutters
    IS 1004 : 1980 Specification for Valve Grinding Compound
    IS 1005 : 1992 Edible Maize Starch (Corn Flour) – Specification
    IS 1006 : 1984 Specification for Arrowroot Starch
    IS 1007 : 1984 Specification for Custard Powder
    IS 1008 : 1981 Specification for Hard Boiled Sugar Confectionery
    IS 1009 : 1979 Specification for Maida for General Purposes
    IS 1010 : 1968 Specification for Suji or Rava (Semolina)
    IS 1011 : 2002 Biscuits – Specification
    IS 1012 : 2002 Turbine Lubricating Oils — Specification
    IS 1013 : 1972 Specification for Triple Superphosphate
    IS 1014 : 1956 Specification for Bone-Meal, Steamed
    IS 1015 : 2000 Leather Pump Buckets and Seat Valves Made from Vegetable Tanned Leather – Specification
    IS 1017 : 1983 Specification for Chamois Leather
    IS 1018 : 1982 Specification for Padlocks, Brass, Lever Type, Machine Made
    IS 1019 : 1974 Specification for rim latches
    IS 1024 : 1999 Code of practice for use of welding in bridges and structures subject to dynamic loading
    IS 1028 : 1987 Specification for Silicon Bronze Ingots and Castings
    IS 1029 : 1970 Hot-rolled steel strip (baling)
    IS 1030 : 1998 Carbon steel castings for general engineering purposes
    IS 1035 : 1972 Methods of sampling and test for bleaching earths
    IS/ISO 1036 : 1984 Textile Machinery and Accessories – Dyeing and Finishing Machines – Definition of Left and Right Sides
    IS 1038 : 1983 Specification for steel doors, windows and ventilators
    IS 1039 : 1989 Textiles – Estimation of small quantities of copper, iron, manganese, chromium and zinc
    IS 1040 : 1987 Calcium carbide, technical
    IS 1041 : 1988 Specification for Box Blanks for Jute Looms
    IS 1042 : 1988 Specification for Boards for Lay Races of Jute Looms
    IS 1043 : 1988 Specification for Blanks for Lay Blocks for Jute Looms
    IS 1046 : 1992 Cash boxes – Specifications
    IS 1047 : 1965 Methods of chemical analysis of antimony
    IS 1049 : 1962 Specification for Alcohol, Perfumery Grade
    IS 1050 : 1984 Specification for Lime Sulphur Solution
    IS 1051 : 1980 Specification for Pyrethrum Extracts
    IS 1055 : 1984 Specification for Nicotine Sulphate Solution
    IS 1056 : 1993 Commercial weights – Specification
    IS 1057 : 1993 Legal metrology – Commercial carat weights – Specification
    IS 1058 : 1993 Legal metrology – Commercial capacity measures – Specification
    IS 1059 : 1994 Legal metrology – Commercial length measures (non-flexible) – Specification
    IS 1060 : Part 1 : 1966 Methods of sampling and test for paper and allied products: Part 1
    IS 1060 : Part 2 : 1960 Methods of sampling and test for paper and allied products: Part 2
    IS 1060 : Part III : 1969 Methods of Sampling and Test for Paper and Allied Products – Part III
    IS 1061 : 1997 Disinfectant Fluids, Phenolic Type – Specification
    IS 1062 : 1963 Methods of test for sparking plugs
    IS 1063 : 1997 Automotive Vehicles – M14 X 1.25 Spark Plugs with Flat Seating and Their Cylinder Head Housing – Specification
    IS 1064 : 1980 Specification for Paper Standard Sizes
    IS 1065 : 1989 Bleaching Powder, Stable – Specification
    IS 1066 : 1980 Code for packaging of sewing threads
    IS 1067 : 1981 Electroplated coatings of silver for decorative and protective purposes
    IS 1068 : 1993 Eletroplated coatings of nickle plus chromium and copper plus nickel plus chromium
    IS 1069 : 1993 Quality Tolerances for Water for Storage Batteries – Specification
    IS 1070 : 1992 Reagent Grade Water – Specification
    IS 1072 : 1996/ISO 4347 : 1992 Leaf chains, clevises and sheaves
    IS 1076 : Part : 1 : 1985 /ISO 3 : 1973 Preferred Numbers – Part 1 : Series of Preferred Numbers
    IS 1076 : Part 2 : 1985 /ISO 17 : 1973 Preferred Numbers – Part 2 : Guide to the Use of Preferred Numbers and Series of Preferred IS 1076 : Part 3 : 1985 /ISO 497 : 1973 Preferred Numbers – Part 3 : Guide to the Choice of Series of Preferred Numbers and of IS 1077 : 1992 Common Burnt Clay Building Bricks – Specification
    IS 1078 : 1987 Specification for Copper Naphthenate
    IS 1079 : 1994 Hot Rolled Carbon Steel Sheets and Strips – Specification
    IS 1080 : 1985 Code of practice for design and construction of shallow foundations in soils (other than raft, ring and shell)
    IS 1081 : 1960 Code of practice for fixing and glazing of metal (steel and aluminium) doors, windows and ventilators
    IS 1083 : 1978 Specification for industrial white oil
    IS 1084 : 1994 Manila Ropes – Specification
    IS 1088 : 1987 Specification for lubricants for clock like mechanisms and precision instruments
    IS 1089 : 1986 Oleum, technical
    IS 1090 : 2002 Compressed Hydrogen – Specification
    IS 1091 : 1985 Nitrocellulose
    IS 1093 : 1981 Specification for Handloom Cotton Madras Handkerchiefs
    IS 1094 : 1976 Specification for Handloom Cotton Gada Cloth
    IS 1095 : 1991 Handloom cotton dress materials, bleached, dyed, printed, striped or checked (superseding IS 861:1983, IS 1098:IS 1096 : 1987 Specification for Handloom Cotton Holland Cloth, Unscoured
    IS 1097 : 1979 Specification for Handloom Cotton Mosquito Netting
    IS 1099 : 1991 Handloom cotton lining cloth, dyed – Specification
    IS 1100 : 1978 Specification for Handloom Cotton Crepe
    IS 1101 : 1981 Specification for Handloom Cotton Cellular Shirting
    IS 1102 : 1968 Specification for Handloom Buckram Cloth
    IS 1103 : 1984 Specification for Brushes, Artists
    IS 1104 : 1984 Specification for Brushes, Lettering
    IS 1105 : 1957 Method for precise conversion of inch and metric dimensions to ensure interchangeability
    IS 1106 : 1986 Distilled water glass bottles
    IS 1107 : 1986 Aerated water glass bottles, crown finish type
    IS 1108 : 1975 Specification for Pharmaceutical Glass Containers
    IS 1109 : 1980 Borax
    IS 1110 : 1990 Ferrosilicon – Specification
    IS 1112 : Part 1 : 1989 Glass shells for general lighting service lamps – Part 1 : 60 to 80 mm shell diameter
    IS 1112 : Part 2 : 1989 Glass shells for general lighting service lamps – Part 2 : 81 to 130 mm shell diameter
    IS 1113 : 1965 Ammonium chloride, technical and pure
    IS 1114 : 1964 Specification for Ammonium Chloride, Fertilizer Grade
    IS 1115 : 1986 Specification for cutting oil, soluble
    IS 1116 : 1994 Glass globes for hurricane lanterns
    IS 1117 : 1975 One-mark pipettes
    IS 1118 : 1992 Specification for gear lubricants, multipurpose (extreme pressure gear oil)
    IS 1120 : 1975 Specification for Coach Screws
    IS 1121 : Part 1 : 1974 Methods of test for determination of strength properties of natural building stones: Part I Compressive strength
    IS 1121 : Part II : 1974 Methods of Test for Determination of Strength Properties of Natural Building Stones – Part II : Transverse IS 1121 : Part III : 1974 Methods of Test for Determination of Strength Properties of Natural Building Stones – Part III : Tensile Strength
    IS 1121 : Part 4 : 1974 Methods of test for determination of strength properties of natural building stones: Part IV Shear strength
    IS 1122 : 1974 Method of test for determination of true specific gravity of natural building stones
    IS 1123 : 1975 Method of identification of natural building stones
    IS 1124 : 1974 Method of test for determination of water absorption, apparent specific gravity and porosity of natural building stones
    IS 1125 : 1974 Method of test for determination of weathering of natural building stones
    IS 1126 : 1974 Method of test for determination of durability of natural building stones
    IS 1127 : 1970 Recommendations for dimensions and workmanship of natural building stones for masonry work
    IS 1128 : 1974 Specification for Limestone (Slab and Tiles)
    IS 1129 : 1972 Recommendation for dressing of natural building stones
    IS 1130 : 1969 Specification for marble (blocks, slabs and tiles)
    IS 1131 : 1985 Specification for Bicycle Bottom Bracket Axle (PH Type)
    IS/IEC 1131-2 : 1992 Programmable Controllers – Part 2 : Equipment Requirements and Tests
    IS 1132 : 1985 Specification for Bicycle Bottom Bracket Adjustable Ball Cup (PH type)
    IS 1133 : 1985 Specification for Bicycle Bottom Bracket Fixed Ball Cup (PH Type)
    IS 1134 : 1985 Specification for Bicycle Bottom Bracket Lock Ring (PH Type)
    IS 1135 : 1995 Springs – Leaf Springs Assembly for Automobiles – Specification
    IS 1136 : 1990 Preferred sizes for wrought metal products
    IS 1137 : 1990 Thicknesses of Sheet and Diameter of Wire
    IS 1140 : 1988 Specification for Logs for Matches
    IS 1141 : 1993 Code of practice for seasoning of timber
    IS 1143 : 1973 Specification for Cotton Mosquito Netting, Square Mesh
    IS 1144 : 1980 Specification for Cotton Cellular Shirting
    IS 1145 : 1980 Lead-acid storage batteries for motor cycles, auto-rickshaws and similar vehicles
    IS 1146 : 1981 Rubber and plastic containers for lead-acid storage batteries
    IS 1148 : 1982 Hot-rolled rivet bars (upto 40 mm dia) for structural purposes
    IS 1149 : 1982 High tensile steel rivet bars for structural purposes
    IS 1150 : 2000 Trade Names and Abbreviated Symbols for Timber Species
    IS 1151 : 1969 Specification for Refind Sugar
    IS 1152 : 1976 Specification for Icing Sugar
    IS 1153 : 2000 Temporary Corrosion Preventives, Hard Film, Solvent Deposited – Specification
    IS 1154 : 2000 Temporary Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing – Specification
    IS 1155 : 1968 Specification for Wheat Atta
    IS 1156 : 1957 Specification for Pearl Barley
    IS 1157 : 1957 Specification for Barley Powder
    IS 1158 : 1973 Specification for Corn Flakes
    IS 1159 : 1981 Specification for Baking Powder
    IS 1160 : 1993 Metric dispensing measures – Specification
    IS 1161 : 1998 Steel Tubes for Structural Purposes – Specification
    IS 1162 : 1958 Specification for Cane Molasses
    IS 1163 : 1992 Chocolates – Specification
    IS 1164 : 1986 Specification for Cocoa Powder
    IS 1165 : 2002 Milk Powder – Specification
    IS 1166 : 1986 Specification for Condensed Milk, Partly Skimmed and Skimmed Condensed Milk
    IS 1167 : 1965 Specification for Casein (Edible Quality)
    IS 1168 : 1973 Specification for Cube Sugar
    IS 1169 : 1967 Electric pedestal type fans and regulators
    IS 1170 : 1992 Ferrochromium – Specification
    IS 1171 : 1996 Ferromanganese
    IS 1172 : 1993 Code of Basic Requirements for Water Supply, Drainage and Sanitation
    IS 1173 : 1978 Hot rolled slit steel tee bars
    IS 1175 : 1981 Methods for Grading and Classification of Muscovite Mica Blocks, Thins and Films
    IS 1177 : 1996 Oil of Vetiver (Cultivated and Khus) – Specification
    IS 1178 : 1986 Specification for Cotton Filter Cloth
    IS 1179 : 1967 Equipment for eye and face protection during welding
    IS 1180 : Part 1 : 1989 Outdoor type three-phase distribution transformers up to and including 100 kVA 11 kV:Part 1 Non-sealed IS 1180 : Part 2 : 1989 Outdoor type three-phase distribution transformers up to and including 100 kVA 11 kV:Part 2 Sealed type
    IS 1182 : 1983 Recommended practice for radiographic examination of fusion welded butt joints in steel plates
    IS 1184 : 1977 Specification for Maize Starch, Cotton Textile Industry
    IS 1186 : 1971 Specification for Shuttles for Hessian and Sacking Looms
    IS 1190 : 1990 Textile Machinery – Healds twin wire for weaving – Specification
    IS 1191 : 2003 Hydrometric Determinations – Vocabulary and Symbols
    IS 1192 : 1981 Velocity Area Methods Measurement of Flow of in Open Channels
    IS 1194 : 1960 Forms for Recording Measurement of Flow of Water in Open Channels
    IS 1195 : 2002 Bitumen-Mastic for Flooring – Specification
    IS 1196 : 1978 Code of practice for laying bitumen mastic flooring
    IS 1197 : 1970 Code of practice for laying of rubber floors
    IS 1198 : 1982 Code of practice for laying, fixing and maintenance of linoleum floor
    IS 1199 : 1959 Methods of sampling and analysis of concrete
    IS 1200 : Part 1 : 1992 Methods of measurement of building and civil engineering works: Part 1 Earthwork
    IS 1200 : Part 2 : 1974 Method of measurement of building and engineering works: Part 2 concrete works
    IS 1200 : Part III : 1976 Method of Measurement of Building and Civil Engineering Works – Part III : Brickwork
    IS 1200 : Part 4 : 1976 Method of measurement of building and civil engineering works: Part 4 stone masonry
    IS 1200 : Part 5 : 1982 Method of measurement of building and civil engineering works: part 5 form work
    IS 1200 : Part 6 : 1974 Method of measurement of building and civil engineering works: Part 6 refractory work
    IS 1200 : Part 7 : 1972 Method of measurement of building and civil engineering works: Part 7 hardware
    IS 1200 : Part 8 : 1993 Method of measurement of building and civil engineering work: Part 8 steel work and iron work
    IS 1200 : Part 9 : 1973 Method of measurement of building and civil engineering work: Part 9 roof covering (including cladding)
    IS 1200 : Part 10 : 1973 Method of measurement of building and civil engineering works: part 10 ceiling and linings
    IS 1200 : Part 11 : 1977 Method of measurement of building and civil engineering work: Part11 paving, floor finishes dado and IS 1200 : Part XII : 1976 Method of Measurement of Building and Civil Engineering Works – Part XII : Plastering and Pointing
    IS 1200 : Part 13 : 1994 Method of measurement of building and civil engineering works: Part 13 Whitewashing, colour washing, IS 1200 : Part 14 : 1984 Method of measurement of building and civil engineering works: Part 14 glazing
    IS 1200 : Part 15 : 1987 Method of measurement of building and civil engineering works: Part 15 painting, polishing, varnishing IS 1200 : Part 16 : 1979 Method of measurement of building and civil engineering works: Part 16 laying of water and sewer lines IS 1200 : Part 17 : 1985 Method of measurement of building and civil engineering works: Part 17 road work including air field pavements
    IS 1200 : Part 18 : 1974 Method of measurement of building and civil engineering works: Part 18 demolition and dismantling
    IS 1200 : Part XIX : 1981 Method of Measurement of Building and Civil Engineering Works – Part XIX : Water Supply, Plumbing IS 1200 : Part 20 : 1981 Method of measurement of building and civil engineering works: Part 20 laying of gas and oil pipelines
    IS 1200 : Part 21 : 1973 Method of measurement of building and civil engineering works: Part 21 wood-work and joinery
    IS 1200 : Part 22 : 1982 Method of measurement of building and civil engineering works: Part 22 materials
    IS 1200 : Part 23 : 1988 Method of measurement of building and civil engineering works: Part 23 piling
    IS 1200 : Part 24 : 1983 Method of measurement of building and civil engineering works: Part 24 well foundations
    IS 1200 : Part 25 : 1971 Method of measurement of building and civil engineering works: Part 25 tunneling
    IS 1200 : Part 26 : 1987 Method of measurement of building and civil engineering works: Part 26 Acid resistant lining
    IS 1200 : Part 27 : 1992 Method of measurement of building and civil engineering works: Part 27 Earthwork done by mechanical IS 1200 : Part 28 : 1992 Methods of measurement of building and civil engineering works: Part 28 Sound insulation works
    IS 1201 to IS 1220 : 1978 Methods for Testing Tar and Bituminous Materials
    IS 1221 : 1991 Fountain Pen Ink – Dye Based – Specification
    IS 1222 : 1992 Ink, duplicating, for twin cylinder rotary machines
    IS 1223 : 2001 Apparatus for Determination of Milk Fat by Gerber Method – Specification
    IS 1224 : Part I : 1977 Determination of Fat by the Gerber Method – Part I : Milk
    IS 1224 : Part 2 : 1977 Determination of milk fat by the gerber method: Part 2 Milk products
    IS 1225 : 1972 Specification for Leather Picking Bands for Looms
    IS 1231 : 1974 Dimensions of Three-phase Foot-mounted Induction Motors
    IS 1234 : 1980 Specification for Ink, Stencil, Oil Base, for Marking Porous Surfaces
    IS 1235 : 1988 Specification for Acetic Anhydride
    IS 1237 : 1980 Specification for Cement Concrete Flooring Tiles
    IS 1239 : Part 1 : 1990 Mild Steel Tubes, Tubulars and Other Wrought Steel Fittings – Specification – Part 1 : Mild Steel Tubes
    IS 1239 : Part 2 : 1992 Mild steel tubes, tubulars and other wrought steel fittings, Part 2 Mild steel tubulars and other wrought steel
    IS 1241 : 1987 Specification for Handloom Cotton Calico, Bleached or Dyed
    IS 1242 : 1975 Specification for Handloom Cotton Shirting
    IS 1243 : 1981 Specification for Handloom Cotton Coating
    IS 1244 : 1990 Handloom cotton long cloth – Specification
    IS 1245 : 1990 Handloom cotton pyjama cloth, grey – Specification
    IS 1246 : 1978 Specification for Handloom Cotton Curtain Cloth
    IS 1247 : 1987 Specification for Handloom Cotton Madras Check
    IS 1248 : Part 1 : 1993 Direct Acting Indicating Analogue Electrical Measuring Instruments and their Accessories – Specification IS 1248 : Part 2 : 1983 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 2 Ammeters IS 1248 : Part 3 : 1983 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 3 Wattmeters IS 1248 : Part 4 : 1983 Specification for Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories IS 1248 : Part 5 : 1983 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 5 Phase meters, IS 1248 : Part 6 : 1983 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 6 Ohmmeters IS 1248 : Part 7 : 1984 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 7 Multifunction IS 1248 : Part 8 : 1984 Specification for Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories IS 1248 : Part 9 : 1983 Direct acting indicating analogue electrical measuring instruments and their accessories: Part 9 Test methods
    IS 1249 : 1997 Recommendations for selection of grinding wheels
    IS 1250 : 1958 Proof corrections for printers and authors
    IS 1251 : 1988 Specification for Zinc Phosphide, Technical
    IS 1252 : 1991 Dimensions of hot rolled steel bulb angles
    IS 1253 : 1992 Aluminium for use in iron and steel manufacture
    IS 1254 : 1991 Corrugated aluminium sheet
    IS 1255 : 1983 Code of practice for installation and maintenance of power cables upto and including 33 kV rating
    IS 1258 : 1987 Bayonet lamp holders
    IS 1259 : 1984 Vinyl coated fabrics (third revision)
    IS 1260 : Part 1 : 1973 Pictorial marking for handling and labelling of goods: Part 1 Dangerous goods
    IS 1260 : Part 2 : 1999 /ISO 780 : 1997 Packaging – Pictorial Marking for Handling and Labelling of Goods – Part 2 : General Goods
    IS 1261 : 1959 Code of practice for seam welding in mild steel
    IS 1262 : 1979 Specification for Abrasive Specialities (Bonded)
    IS 1263 : 1986 Specification for Cocoa Butter
    IS 1264 : 1997 Brass gravity die castings (ingots and castings)
    IS 1265 : 1991 Handloom woollen tweed
    IS 1266 : 1991 Handloom serge
    IS 1267 : 1992 Handloom Worsted Rafal Shawls and Lohis
    IS 1269 : Part 1 : 1997 Legal metrology – Material measure of length Part 1 : Woven metallic and glass fibre tape measures
    IS 1269 : Part 2 : 1997 Legal metrology – Material measures of length Part 2: Steel tape measures
    IS 1271 : 1985 Thermal evaluation and classification of electrical insulation
    IS 1273 : 1989 Leather Pump Buckets Made from Chrome Tanned Leather – Specification
    IS 1275 : 1976 Rules for making alphabetical indexes
    IS 1278 : 1972 Filler rods and wires for gas welding
    IS 1280 : 1975 Foundry moulding boxes of steel construction
    IS 1281 : 1996 Bicycle Cranks and Chain Wheels – Specification
    IS 1282 : 1968 Specification for Bicycle Cotter Pins, Washers and Nuts
    IS 1283 : 1995 Bicycles – Free-wheels – Specification
    IS 1284 : 1975 Wrought aluminium alloy bolt and screw stock for general engineering purposes
    IS 1285 : 2002 Wrought Aluminium and Aluminium Alloys – Extruded Round Tube and Hollow Sections for General Engineering IS 1287 : 1993 Electric toasters
    IS 1288 : 1982 Methods of test for mineral gypsum
    IS 1289 : 1960 Methods for sampling of mineral gypsum
    IS 1290 : 1973 Mineral gypsum
    IS 1292 : 1991 Silica mortar for laying silica bricks in furnaces
    IS 1293 : 1988 Plugs and socket outlets of 250 volts and rated current up to 16 amperes
    IS 1294 : 1989 Household Sewing Machines – Bobbins – Specification
    IS 1295 : 1990 Household sewing machines – Needle bar – Specification_
    IS 1296 : 1989 Household sewing machines – presser foot – Specification
    IS 1297 : 1991 Household sewing machines – Presser bar – Specification
    IS 1299 : 1984 Method for determination of dimensional changes on washing of fabrics woven from rayon and synthetic fibres
    IS 1300 : 1994 Phenolic moulding materials – Specification
    IS 1303 : 1983 Glossary of terms relating to paints
    IS 1304 : 1980 Glossary of Terms Used in Fertilizer Trade and Industry
    IS 1305 : 1984 Graphite for use in foundry coatings
    IS/IEC 1308 : 1994 High Frequency Dielectric Heating Installations – Test Methods for the Determination of Power Output
    IS 1311 : 1966 Specification for Ethylene Dibromide
    IS 1312 : 1980 Specification for Methyl Bromide
    IS 1313 : 1984 Method for determination of dimensional changes on washing of knitted goods containing wool
    IS 1314 : 1984 Specification for Calcium Chloride
    IS 1315 : 1977 Method for determination of linear density of yarn spun on cotton system
    IS 1316 : 1984 Methods for detection and estimation of damage in cotton fabrics due to micro-organisms
    IS 1317 : 1969 Specification for Edible Tapioca Chips
    IS 1318 : 1969 Specification for Edible Tapioca Flour
    IS 1319 : 1983 Specification for Edible Tapioca Starch
    IS 1320 : 1988 Specification for Baker’s Yeast
    IS 1321 : Part 1 : 2003 Sisal Ropes – Specification – Part 1 : Untarred Varieties
    IS 1321 : Part II : 1982 Specification for Sisal Ropes – Part II : Tarred Varieties
    IS 1322 : 1993 Specification for bitumen felts for water proofing and damp-proofing
    IS 1323 : 1982 Code of practice for oxy-acetylene welding for structural work in mild steels
    IS 1324 : 1966 Glossary of Textile Terms Relating to Man-made Fibre and Fabric Industry
    IS 1326 : 1992 Specification for non-coniferous sawn timber (baulks and scantling)
    IS 1327 : 1988 Methods of determination of mass of tin coatings of tinplate
    IS 1328 : 1996 Veneered Decorative Plywood – Specification
    IS 1329 : 1975 Specification for aircaraft timber (baulks and scantlings)
    IS 1331 : 1971 Specification for cut sizes of timber
    IS 1332 : 1986 Specification for precast reinforced concrete street lighting poles
    IS 1333 : 1978 Ink, duplicating, for single drum rotary machine
    IS 1335 : 1979 Methods for direct determination of alumina in refractory materials
    IS 1337 : 1993 Electroplated coatings of hard chromium for engineering purposes
    IS 1339 : 1992 Lead and lead alloys for sheathing of electric cables
    IS 1340 : 1977 Code of practice for chromate conversion coating on zinc and cadmium coated articles and zinc base alloys
    IS 1341 : 1992 Specification for steel butt hinges
    IS 1342 : 2002 Oil Pressure Stoves – Specification
    IS 1343 : 1980 Code of Practice for Prestressed Concrete
    IS 1344 : 1981 Specification for calcined clay pozzolana
    IS 1345 : 1960 Methods of chemical analysis of printing metal
    IS 1346 : 1991 Code of Practice for Waterproofing of Roofs with Bitumen Felts
    IS 1347 : 1972 Specification for Inland Packaging of Cotton Cloth and Yarn
    IS 1349 : 1964 Methods for determination of wool fibre content of raw wool
    IS 1350 : Part I : 1984 Methods of Test for Coal and Coke – Part I : Proximate Analysis
    IS 1350 : Part II : 1970 Methods of Test for Coal and Coke – Part II : Determination of Calorific Value
    IS 1350 : Part 3 : 1969 Methods of test for coal and coke: Part III Determination of sulphur
    IS 1350 : Part IV : Sec 1 : 1974 Methods of Test for Coal and Coke – Part IV : Ultimate Analysis – Section I : Determination of Carbon IS 1350 : Part 4 : Sec 2 : 1975 Methods of test for coal and coke: Part IV Ultimate analysis, Section 2 – Determination of nitrogen IS 1350 : Part V : 1979 Methods of Test for Coal and Coke – Part V : Special Impurities
    IS 1353 : 1993 Methods of test for coal carbonization – caking index, swelling and Grey-King assay (L.T) coke types
    IS 1354 : 1992 Methods of test for coke special test
    IS 1355 : 1984 Methods of determination of chemical composition of ash of coal and coke
    IS 1356 : Part 1 : 1972 Electrical equipment of machine tools:Part 1 Electrical equipment of machines for general use
    IS 1357 : 1984 Printing type metal ingots
    IS 1358 : 1967 Practice for layout of library catalogue code
    IS 1359 : 1992 Electroplated coatings of tin
    IS 1360 : 1989 Engineers’ Pattern Tee Squares – Specification
    IS 1361 : 1978 Specification for steel windows for industrial buildings
    IS 1363 : Part 1 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grade `C’ – Part 1 : Hexagon Head Bolts (Size Range IS 1363 : Part 2 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grade `C’ – Part 2 : Hexagon Head Screws (Size Range IS 1363 : Part 3 : 1992 /ISO 4034 : 1986 Hexagon Head Bolts, Screws and Nuts of Product Grade C – Part 3 : Hexagon Nuts (Size IS 1364 : Part 1 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Part 1 : Hexagon Head Bolts (Size IS 1364 : Part 2 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Part 2 : Hexagon Head Screws (Size IS 1364 : Part 3 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Part 3 : Hexagon Nuts, Style 1 (Size IS 1364 : Part 4 : 2003 /ISO 4035 : 1999 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Part 4 : Hexagon IS 1364 : Part 5 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Part 5 : Hexagon Thin Nuts – Product IS 1364 : Part 6 : 2002 Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Part 6 : Hexagon Nuts, Style 2
    IS 1365 : 1978 Specification for Slotted Countersunk Head Screws
    IS 1366 : 2002 Slotted Cheese Head Screws – Product Grade A
    IS 1367 : Part 1 : 2002 Technical Supply Conditions for Threaded Steel Fasteners – Part 1 : General Requirements for Bolts, Screws IS 1367 : Part 2 : 2002 Technical Supply Conditions for Threaded Steel Fasteners – Part 2 : Tolerances for Fasteners – Bolts, Screws, IS 1367 : Part 3 : 2002 Technical Supply Conditions for Threaded Steel Fasteners – Part 3 : Mechanical Properties of Fasteners IS 1367 : Part 5 : 2002 Technical Supply Conditions for Threaded Steel Fasteners – Part 5 : Mechanical Properties of Fasteners IS 1367 : Part 6 : 1994 /ISO 898-2 : 1992 Technical Supply Conditions for Threaded Steel Fasteners – Part 6 : Mechanical Properties IS 1367 : Part VII : 1980 Technical supply conditions for threaded steel fasteners Part VII Mechanical properties and test methods IS 1367 : Part 8 : 2002 Technical Supply Conditions for Threaded Steel Fasteners – Part 8 : Prevailing Torque Type Steel Hexagon IS 1367 : Part 9 : Sec 1 : 1993/ISO 6157-1 : 1988 Technical supply conditions for threaded steel fasteners Part 9 Surface discontinuities IS 1367 : Part 9 : Sec 2 : 1993/ISO 6157-3 : 1988 Technical supply conditions for threaded steel fasteners Part 9 Surface discontinuities IS 1367 : Part 10 : 2002 Technical Supply Conditions for Threaded Steel Fasteners – Part 10 : Surface Discontinuities – Nuts
    IS 1367 : Part 11 : 2002 Technical Supply Conditions for Threaded Steel Fasteners – Part 11 : Electroplated Coatings
    IS 1367 : Part XII : 1981 Technical Supply Conditions for Threaded Steel Fasteners – Part XII : Phosphate Coatings on Threaded IS 1367 : Part XIII : 1983 Technical supply conditions for threaded steel fasteners Part XIII Hot-dip galvanized coatings on threaded IS 1367 : Part 14 : 1984 Technical Supply Conditions for Threaded Steel Fasteners – Part 14 : Stainless Steel Threaded Fasteners
    IS 1367 : Part 14 : Sec 1 : 2002 Technical Supply Conditions for Threaded Steel Fasteners – Part 14 : Mechanical Properties of IS 1367 : Part 14 : Sec 2 : 2002 Technical Supply Conditions for – Threaded Steel Fasteners – Part 14 : Mechanical Properties IS 1367 : Part 14 : Sec 3 : 2002 Technical Supply Conditions for Threaded Steel Fasteners – Part 14 : Mechanical Properties of IS 1367 : Part 16 : 2002 Technical Supply Conditions for Threaded Steel Fasteners – Part 16 : Designation System for Fasteners
    IS 1367 : Part 17 : 1996/ISO 3269 : 1988 Industrial fastners – Threadeed steeel fasteners – Technical supply conditions Part 17 IS 1367 : Part 18 : 1996 Industrial Fasteners – Threaded Steel Fasteners – Technical Supply Conditions – Part 18 : Packaging
    IS 1367 : Part 19 : 1997/ISO 3800 : 1993 Industrial fasteners – Threaded steel fasteners – Technical supply conditions Part 19 Axial IS 1367 : Part 20 : 1996 /ISO 898-7 : 1992 Industrial Fasteners – Threaded Steel Fasteners – Technical Supply Conditions – Mechanical IS 1368 : 1987/ISO 4753 : 1983 Dimensions for ends of parts with external ISO metric threads
    IS 1369 : Part 1 : 1993 /ISO 3508 : 1976 Fasteners – Thread Run-Outs and Undercuts Part 1 Dimensions for Screw Thread Run-IS 1369 : Part 2 : 1993/ISO 4755 : 1983 Fasteners – Thread runout and undercuts Part 2 Dimensions for screw thread undercuts IS 1369 : Part 3 : 1995 Fasteners – Thread Run-Outs and Undercuts – Part 3 : Dimensions for Screw Thread Run-Outs and Undercuts IS 1370 : 1993 Transmission belting – Friction surface rubber belting – Specification
    IS 1374 : 1992 Poultry Feeds – Specification
    IS 1375 : 1981 Specification for Black Lead Pencils
    IS 1376 : 1998 Textiles – Cotton sewing threads for aerospace purposes – Specification
    IS 1377 : 1971 Methods for determination of mean fibre length of wool
    IS 1378 : 1987 Oxidized-copper finishes
    IS 1379 : 1985 Specification for Ink, Marking, for Non-porous Surfaces (with or without stencil plate)
    IS 1380 : 1980 Ink, finger printing, black
    IS 1381 : Part 1 : 2003 /ISO 1773 : 1997 Laboratory Glassware – Narrow-Necked – Boiling Flasks
    IS 1381 : Part II : 1977 Specification for Boiling Flasks – Part II : Flasks with Conical Ground Socket
    IS 1382 : 1981 Glossary of terms relating to glass and glassware
    IS 1383 : 1977 Methods for determination of scouring loss in grey and finished cotton textile materials
    IS 1384 : 1999 Oil Pressure Lanterns – Specification
    IS 1386 : 1974 Methods for testing cotton cordages for resistance to attack by micro-organisms
    IS 1387 : 1993 General requirments for the supply of metallurgical materials
    IS 1388 : 1993 Reagent bottles
    IS 1389 : 1984 Methods for testing cotton fabrics for resistance to attack by micro-organisms
    IS 1390 : 1983 Methods for determination of pH value of aqueous extracts of textile materials
    IS 1391 : Part 1 : 1992 Room Air Conditioners – Specification – Part 1 : Unitary Air Conditioners
    IS 1391 : Part 2 : 1992 Room air conditioners: Part 2 Split air conditioners
    IS 1392 : 1999 Glass Milk Bottles – Specification
    IS 1393 : 1961 Code of practice for training and testing of oxy acetylene welders
    IS 1394 : 1984 Glossary of terms relating to metal containers
    IS 1395 : 1982 Low and medium alloy steel covered electrodes for manual metal arc welding
    IS 1397 : 1990 Kraft Paper – Specification
    IS 1398 : 1982 Specification for Packing Paper Water Proof, Bitumen-Laminated
    IS 1399 : 1959 Glossary of terms used in optical technology
    IS 1400 : 1960 Specification for Optical Glass
    IS 1401 : 1970 Accessibility test probes
    IS 1402 : 1992 Textiles – Braided cotton cord for aerospace purposes – Specification
    IS 1403 : Part 1 : 1993/ISO 7799 : 1985 Mechanical testing of metals – Reverse bend test Part 1 Sheet & strip
    IS 1405 : 1982 Methods of sampling of iron ores
    IS 1406 : 1995 Rectangular Tins for Liquids — Specification
    IS 1407 : 1980 Round paint tins
    IS 1408 : 1968 Recommended Procedure for Inspection of Copper-base Alloy Sand Castings
    IS 1409 : 1959 Methods of chemical analysis of antifriction bearing alloys
    IS 1410 : 2001 Textiles – Coir Ropes – Specification
    IS 1414 : 1989 Code of practice for fixing wall covering
    IS 1415 : 1966 Electric hand lamps
    IS 1416 : 1972 Safety transformers
    IS 1417 : 1999 – Gold and Gold Alloys, Jewellery/Artefacts – Fineness and Marking – Specification
    IS 1418 : 1999 Assaying of Gold in Gold Bullion, Gold Alloys and Gold Jewellery/Artefacts – Cupellation (Fire Assay) Method
    IS 1419 : 1989 Anti-fouling paint, brushing, for ship’s bottoms and hulls
    IS 1420 : 1989 Light basic magnesium carbonate
    IS 1422 : 1983 Specification for Cotton duck
    IS 1423 : 1985 Specification for Cotton Gaberdine
    IS 1424 : 1983 Specification for Cotton Canvas
    IS 1431 : 1973 Specification for Cotton Mosquito Netting, Round Mesh
    IS 1432 : 1959 General requirements for weighing instruments
    IS 1433 : 1990 Beam Scales – Specification
    IS 1434 : 1959 Specification for Counter Machines
    IS 1435 : 1991 Platform weighing machines – Specification
    IS 1436 : 1991 Weigh bridges – Specification
    IS 1437 : 1967 Automatic weighing machines
    IS 1438 : 1960 Specification for Crane Weighing Machines
    IS 1439 : 1990 Steelyards – Specification
    IS 1440 : 1980 Ink, metal stamp, black
    IS 1441 : 1989 Insulator stalks for telegraph and telephone lines
    IS 1443 : 1972 Code of practice for laying and finishing of cement concrete flooring tiles
    IS 1444 : 1989 Engineer’s Pattern Drawing Boards – Specification
    IS 1445 : 1977 Porcelain insulators for overhead power lines with a nominal voltage up to and including 1 000 V
    IS 1446 : 2002 Classification of Dangerous Goods
    IS 1447 : Part 1 : 2000 Petroleum and its Products – Methods of Sampling – Part 1 : Manual Sampling
    IS 1447 : Part 2 : 1992 Methods of sampling of petroleum and its products: Part 2 Sampling of liquefied petroleum gas (LPG)
    IS 1447 : Part 3 : 1992 Petroleum and its products – Methods of sampling Part 3 Method of Sampling of Semi-solid and soild petroleum IS 1447 : Part 4 : 1989 Methods of sampling of petroleum and its products: Part 4 Sampling of petroleum coke for laboratory analysis
    IS 1448 : Part I : 1971 Neutralization Number by Potentiometric Titration – Part I
    IS 1448 : Part 1 : Sec 1 : 2002 Methods of Test for Petroleum and its Products : Part 1 : Sec 1 : Determination of Acid Number IS 1448 : Part 1 : Sec 2 : 2002 Methods of Test for Petroleum and its Products : Part 1 : Sec 2 : Determination of Base Number IS 1448 : Part 2 : 1967 Methods of test for petroleum and its products Part 2: Acidity
    IS 1448 : Part 3 : 1984 Methods of test for petroleum and its products Part 3: Aniline Point of Petroleum Products and Hydrocarbon IS 1448 : Part 4 : 1984 Methods of test for petroleum and its products Part 4: Ash, sulphated ash and water soluble ash
    IS 1448 : Part 5 : 1970 Methods of test for petroleum and its products Part 5: Burning quality
    IS 1448 : Part 6 : 1984 Methods of test for petroleum and its products part 6: Heat of Combustion of Liquid Hydrocarbon Fuels IS 1448 : Part 7 : 1960 Methods of test for petroleum and its products Part 7: Calorific value by calculation
    IS 1448 : Part 8 : 1967 Methods of test for petroleum and its products Part 8: Carbon residue by Ramsbottom method
    IS 1448 : Part 9 : 1960 Methods of test for petroleum and its products Part 9: Cetane number
    IS 1448 : Part 10 : 1970 Methods of test for petroleum and its products Part 10: Cloud point and pour point
    IS 1448 : Part 11 : 1990 Methods of test for petroleum and its products Part 11: Freezing point of aviation fuels
    IS 1448 : Part 12 : 1967 Methods of test for petroleum and its products Part 12: Colour by ASTM colour scale
    IS 1448 : Part 13 : 1960 Method of test for petroleum and its products Part 13: Colour by Lovibond tintometer
    IS 1448 : Part 14 : 1960 Methods of Test for Petroleum and its Products – Part 14 : Colour by Saybolt Chronometer
    IS 1448 : Part 15 : 1976 Methods of test for petroleum and its products Part 15: Detection of copper corrosion from petroleum products IS 1448 : Part 16 : 1990 Methods of test for petroleum and its products: Part 16 Density, Relative Density or API Gravity of Crude IS 1448 : Part 17 : 1960 Methods of test for petroleum and its products: Part 17 Diesel index
    IS 1448 : Part 18 : 1991 Methods of test for petroleum and its products: Part 18 Distillation of Petroleum Products
    IS 1448 : Part 19 : 1989 Methods of test for petroleum and its products: Part 19 Doctor Test
    IS 1448 : Part 20 : 1998 Methods of test for petroleum and its products: Part 20 Determination of flash point by Abel apparatus
    IS 1448 : Part 21 : 1992 Petroleum and its Products – Methods of Test – Part 21 : Flash Point (closed) by Pensky Martens Apparatus
    IS 1448 : Part 22 : 1985 Methods of test for petroleum and its products: Part 22 Asphaltene precipitation with normal heptane
    IS 1448 : Part 23 : 1991 Methods of test for petroleum and its products: Part 23 Hydrocarbon types in liquid petroleum products IS 1448 : Part 24 : 1971 Methods of Test for Petroleum and its Products – Part 24 : Kauri-Butanol Value
    IS 1448 : Part 25 : 1976 Methods of Test for Petroleum and its Products – Part 25 : Determination of Kinematic and Dynamic Viscosity
    IS 1448 : Part 26 : 1960 Methods of test for petroleum and its products: Part 26 Knock characteristics of motor fuels by the motor IS 1448 : Part 27 : 1960 Methods of test for petroleum and its products: Part 27 Knock characteristics of motor fuels by the research IS 1448 : Part 28 : 1985 Methods of test for Petroleum and its Products – Part 28 : Oxidation Stability of Motor Gasoline and Aviation IS 1448 : Part 29 : 1982 Methods of test for petroleum and its products: Part 29 Existent gum in fuels by jet evaporation
    IS 1448 : Part 30 : 1970 Methods of test for petroleum and its products: Part 30 Sediment in crude and fuel oils by extraction
    IS 1448 : Part 31 : 1968 Methods of test for petroluem and its products: Part 31 Smoke point
    IS 1448 : Part 32 : 1992 Methods of test for petroleum and its products: Part 32 Density and relative density
    IS 1448 : Part 33 : 1991 Methods of test for petroleum and its products: Part 33 Sulphur by Bomb method
    IS 1448 : Part 34 : 1979 Methods of Test for Petroleum and its Products – Part 34 : Determination of Sulphur in Petroleum Products IS 1448 : Part 36 : 1960 Methods of test for petroleum and its products: Part 36 Sulphur mercaptans
    IS 1448 : Part 38 : 1982 Methods of test for petroleum and its products: Part 38 Determination of lead antiknock compound in gasoline IS 1448 : Part 39 : 1967 Methods of test for petroleum and its products: Part 39 Vapour pressure by Reid method
    IS 1448 : Part 40 : 1987 Methods of test for petroleum and its products: Part 40 Water by distillation
    IS 1448 : Part 41 : 1992 Methods of test for petroleum and its products: Part 41 Water and sediment in crude oils and fuel oils by IS 1448 : Part 42 : 1977 Methods of test for petroleum and its products: Part 42 Water reaction of aviation fuels
    IS 1448 : Part 43 : 1991 Methods of test for petroleum and its products: Part 43 Bromine number by colour indicator method
    IS 1448 : Part 44 : 1983 Methods of test for petroleum and its products: Part 44 Bromine number by electrometric titration method
    IS 1448 : Part 45 : 1962 Methods of Test for Petroleum and its Products – Part 45 : Knock Characteristics of Aviation Fuels by the IS 1448 : Part 46 : 1962 Methods of Test for Petroleum and its Products – Part 46 : Knock Characteristics of Aviation Fuels by the
    IS 1448 : Part 47 : 1962 Methods of Test for Petroleum and its Products – Part 47 : Knock Characteristics of High Performance IS 1448 : Part 50 : 1977 Methods of test for petroleum and its products: Part 50 Chlorine in new and used lubricants (sodium alcoholate IS 1448 : Part 51 : 1963 Methods of test for petroleum and its products: Part 51 Copper strip corrosion test for lubricating greases
    IS 1448 : Part 52 : 1971 Methods of test for petroleum and its products: Part 52 Drop Point
    IS 1448 : Part 53 : 1979 Methods of test for petroleum and its products: Part 53 Determination of acidity and alkalinity of greases
    IS 1448 : Part 54 : 1979 Methods of Test for Petroleum and its Products – Part 54 : Determination of Phosphorus in Lubricating IS 1448 : Part 55 : 1963 Methods of test for petroleum and its products: Part 55 Saponification value, saponifiable and unsaponifiable IS 1448 : Part 56 : 1980 Methods of Test for Petroleum and its Products – Part 56 : Viscosity Index by Calculation
    IS 1448 : Part 57 : 1964 Consistency of Greases at Various Temperatures
    IS 1448 : Part 58 : 1991 Methods of test for petroleum and its products: Part 58 Determination of insolubles in greases
    IS 1448 : Part 59 : 1991 Methods of test for petroleum and its products: Part 59 Determination of mineral oil content in greases
    IS 1448 : Part 60 : 1994 Petroleum and its Products – Methods of Test – Part 60 : Consistency of Lubricating Greases by Cone IS 1448 : Part 61 : 1974 Methods of test for petroleum and its products: Part 61 Evaporation loss in greases (2-hour drying)
    IS 1448 : Part 62 : 1974 Methods of test for petroleum and its products: Part 62 Heat stability of greases
    IS 1448 : Part 64 : 1998 Methods of test for petroleum and its products: Part 64 Non-volatile matter in solvents
    IS 1448 : Part 65 : 1986 Methods of test for petroleum and its products: Part 65 Oxidation test for lubricating oils
    IS 1448 : Part 66 : 1969 Methods of test for petroleum and its products: Part 66 Flash Point (open) and fire point by pensky-martens IS 1448 : Part 67 : 1982 Methods of Test for Petroleum and its Products – Part 67 : Foaming Characteristics of Lubricating Oils
    IS 1448 : Part 68 : 1967 Methods of Test for Petroleum and its Products – Part 68 : Evaporation Loss in Greases (22-hour Drying)
    IS 1448 : Part 69 : 1969 Methods of test for petroleum and its products: Part 69 Flash and fire point by cleveland (open) cup
    IS 1448 : Part 70 : 1968 Methods of test for petroleum and its products: Part 70 Residue in liquefied petroleum gases
    IS 1448 : Part 71 : 1979 Methods of test for petroleum and its products: Part 71 Vapour pressure of liquefied petroleum gases
    IS 1448 : Part 72 : 1968 Methods of test for petroleum and its products: Part 72 Volatility of liquefied petroleum gases
    IS 1448 : Part 73 : 1968 Methods of test for petroleum and its products: Part 73 Hydrogen sulphide in liquefied petroleum gases
    IS 1448 : Part 74 : 1968 Methods of test for petroleum and its products: Part 74 Dryness of liquefied petroleum gases
    IS 1448 : Part 75 : 1968 Methods of test for petroleum and its products: Part 75 Odour of liquefied petroleum gases
    IS 1448 : Part 76 : 1968 Methods of test for petroleum and its products: Part 76 Density of liquefied petroleum gases
    IS 1448 : Part 77 : 1971 Metallic Constituents of Lubricating Oils, Chemical Method – Part 77
    IS 1448 : Part 78 : 1973 Methods of test for petroleum and its products: Part 78 Determination of trace elements in petroleum products IS 1448 : Part 79 : 1992 Methods of test for petroleum and its products: Part 79 Determination of trace elements in petroleum products IS 1448 : Part 80 : 1973 Methods of test for petroleum and its products: Part 80 Determination of trace elements in Petroleum products IS 1448 : Part 81 : 1973 Methods of test for petroleum and its products: Part 81 Determination of trace elements in Petroleum products IS 1448 : Part 82 : 1974 Methods of test for petroleum and its products: Part 82 Total lead content in gasoline by iodine monochloride IS 1448 : Part 83 : 1974 Methods of test for petroleum and its products: Part 83 Determination sulphur by Wickbold oxyhydrogen IS 1448 : Part 84 : 1975 Methods of test for petroleum and its products: Part 84 Determination of trace elements in Petroleum products IS 1448 : Part 85 : 1976 Methods of test for petroleum and its products: Part 85 Oil separation on 1 storage of greases
    IS 1448 : Part 86 : 1977 Methods of test for petroleum and its products: Part 86 Determination of total base number by potentiometric IS 1448 : Part 87 : 1979 Methods of test for petroleum and its products: Part 87 Autoignition temperature of liquid petroleum products
    IS 1448 : Part 89 : 1979 Methods of test for petroleum and its products: Part 89 Test for thermal stability of lubricating greases
    IS 1448 : Part 90 : 1979 Methods of test for petroleum and its products: Part 90 Test for water washout characteristics of lubricating IS 1448 : Part 91 : 1979 Methods of test for petroleum and its products: Part 91 Emulsion characteristics of petroleum oils and IS 1448 : Part 92 : 1979 Methods of test for petroleum and its products: Part 92 Cone penetration of petrolatum
    IS 1448 : Part 93 : 1979 Methods of test for petroleum and its products: Part 93 Needle penetration of petroleum waxes
    IS 1448 : Part 94 : 1980 Methods of test for petroleum and its products: Part 94 Test for oxidation stability of lubricating greases IS 1448 : Part 95 : 1980 Methods of test for petroleum and its products: Part 95 Determination of demulsification number of lubricating IS 1448 : Part 96 : 1980 Methods of Test for Petroleum and its Products – Part 96 : Rust-preventing Characteristics of Steam-turbine IS 1448 : Part 97 : 1980 Methods of test for petroleum and its products: Part 97 Thermal oxidation stability of aviation turbine fuels IS 1448 : Part 98 : 1981 Methods of test for petroleum and its products: Part 98 Determination of 1 emulsion stability of emulsifiable IS 1448 : Part 99 : 1981 Methods of Test for Petroleum and Its Products – Part 99 : Determination of Frothing Characteristics of IS 1448 : Part 100 : 1980 Methods of test for petroleum and its products: Part 100 Determination of thermal stability of emulsifiable IS 1448 : Part 101 : 1980 Methods of test for petroleum and its products: Part 101 Colorimetric determination of phosphorus in IS 1448 : Part 102 : 1981 Methods of test for petroleum and its products: Part 102 Determination of air release value
    IS 1448 : Part 103 : 1981 Methods of test for petroleum and its products: Part 103 Barium, calcium, phosphorous and zinc in lubricating IS 1448 : Part 104 : 1981 Methods of test for petroleum and its products: Part 104 Aromatics in light naphthas and aviation gasolines IS 1448 : Part 105 : 1981 Methods of test for petroleum and its products: Part 105 Ultraviolet (UV) absorbance and absorptivity IS 1448 : Part 106 : 1981 Methods of test for petroleum and its products: Part 106 Determination of oxidation characteristics of IS 1448 : Part 107 : 1982 Methods of test for petroleum and its products: Part 107 Precipitation number of lubricating oils using IS 1448 : Part 108 : 1982 Methods of test for petroleum and its products: Part 108 Aparent viscosity of engine oil at low temperature IS 1448 : Part 109 : 1981 Methods of test for petroleum and its products: Part 109 Determination of mercaptan sulphur – Amperometric IS 1448 : Part 110 : 1981 Methods of test for petroleum and its products: Part 110 Cold filter plugging point of distillate fuels
    IS 1448 : Part 111 : 1983 Methods of test for petroleum and its products: Part 111 Analysis of liquefied petroleum gases (LPG) IS 1448 : Part 112 : 1983 Methods of test for petroleum and its products: Part 112 Determination of lead in gasolsine by atomic IS 1448 : Part 113 : 1983 Methods of test for petroleum and its products: Part 113 Determination of total acidity of ATF (Aviation IS 1448 : Part 114 : 1984 Methods of test for petroleum and its products: Part 114 Determination of congealing point of petroleum IS 1448 : Part 115 : 1984 Methods of test for petroleum and its products: Part 115 Determination of salt content in crude petroleum IS 1448 : Part 116 : 1992 Methods of Test for Petroleum and its Products – Part 116 : Determination of Cone Penetration of Lubricating IS 1448 : Part 118 : 1985 Methods of Test for Petroleum and its Products – Part 118 : Naphthalene Hydrocarbons in Aviation Turbine IS 1448 : Part 119 : 1985 Methods of test for petroleum and its products: Part 119 Aromatic traces in light saturated hydrocarbons IS 1448 : Part 120 : 1986 Methods of test for petroleum and its products: Part 120 Zinc in libricatinng oil
    IS 1448 : Part 121 : 1986 Methods of test for petroleum and its products: Part 121 Barium in lubricating oil additive concentrates
    IS 1448 : Part 122 : 1987 Methods of test for petroleum and its products: Part 122 Conradson carbon residue of petroleum products
    IS 1448 : Part 123 : 1986 Methods of test for petroleum and its products: Part 123 Oxidation stability of inhibited mineral tubrine IS 1448 : Part 124 : 1987 Methods of test for petroleum and its products: Part 124 Dilution of gasoline engine crankcase oils
    IS 1448 : Part 125 : 1987 Methods of Test for Petroleum and its Products – Part 125 : Estimation of Deleterious Particles in Lubricating IS 1448 : Part 126 : 1988 Methods of test for petroleum and its products: Part 126 Determination of ash content in raw and calcined IS 1448 : Part 127 : 1988 Methods of test for petroleum and its products: Part 127 Determination of iron in petroleum coke
    IS 1448 : Part 128 : 1988 Methods of test for petroleum and its products: Part 128 Determination of nickle in calcined petroleum IS 1448 : Part 129 : 1988 Methods of test for petroleum and its products: Part 129 Determination of polymeric content in lubricating IS 1448 : Part 130 : 1988 Methods of test for petroleum and its products: Part 130 Determination of vibrated bulk density of calcined IS 1448 : Part 131 : 1988 Methods of test for petroleum and its products: Part 131 Determination of silicone in petroleum coke
    IS 1448 : Part 132 : 1989 Methods of test for petroleum and its products: Part 132 Determination of moisture content in raw and IS 1448 : Part 133 : 1989 Methods of test for petroleum and its products: Part 133 Determination of real density of calcined petroleum IS 1448 : Part 134 : 1989 Methods of and Test for Petroleum its Products : Part 134 : Determination of Volatile Matter in Raw and IS 1448 : Part 135 : 1991 Methods of Test for Petroleum and its Products – Part 135 : Determination of Water in Crude Oil by Distillation
    IS 1448 : Part 136 : 1991 Methods of test for petroleum and its products: Part 136 Determination of loss of lubricating oils (Noak’s IS 1448 : Part 137 : 1991 Methods of test for petroleum and its products: Part 137 Water separation characteristics of Aviation IS 1448 : Part 138 : 1992 Methods of test for petroleum and its products: Part 138 Determination of soap content
    IS 1448 : Part 139 : 1992 Methods of test for petroleum and its products: Part 139 Determination of real density of calcined petroleum IS 1448 : Part 140 : 1992 Methods of test for petroleum and its products: Part 140 Determination of apparent density of petroleum IS 1448 : Part 141 : 1992 Methods of test for petroleum and its products: Part 141 Determination of apparent density of petroleum IS 1448 : Part 142 : 1993 Methods of test for petroleum and its products: Part 142 Determination of water separation characteristics IS 1448 : Part 143 : 1993 Methods of test for petroleum and its products: Part 143 Evaluation of white mineral oils by Ultraviolet IS 1448 : Part 144 : 1993 Methods of test for petroleum and its products: Part 144 Non-condensable gases in C2 and lighter hydorcarbon IS 1448 : Part 145 : 1993 Methods of test for petroleum and its products: Part 145 Sodium, Nickel and Vanadine in fuel oils and IS 1448 : Part 146 : 1998 Methods of test for petroleum and its products: Part 146 Determination of yield stress and viscosity of IS 1448 : Part 147 : 1998 Methods of test for petroleum and its products: Part 147 Determination of potential gum in motor gasoline
    IS 1448 : Part 148 : 2002 Methods of Test for Petroleum and its Products – Part 148 : Determination of Electrical Conductivity of IS 1449 : 1976 Methods of sampling of mannganese ore
    IS 1450 : 1991 Handloom cotton durries – Specification (amalgamating IS1557:1972)
    IS 1451 : 1979 Specification for Handloom Cotton Drills
    IS 1458 : 1965 Railway bronze ingots and casting
    IS 1459 : 1974 Specification for kerosine
    IS 1460 : 2000 Diesel Fuels – Specification
    IS 1461 : 1984 Specification for Plastic Buttons (Thermosetting)
    IS 1462 : 1985 Specification for Talc for Cosmetic Industry
    IS 1463 : 1983 Specification for Kaolin for Cosmetic Industry
    IS 1464 : 1992 Specification for clay ridge and ceiling tiles
    IS 1466 : 1985 Ferrovanadium
    IS 1467 : 1993 Ferrotungsten
    IS 1468 : 2000 Ferrotitanium – Specification
    IS 1469 : 1993 Ferromolybdenum
    IS 1470 : 1990 Silicomanganese
    IS 1471 : 1988 Ferrophosphorous
    IS 1472 : 1977 Methods of sampling ferro alloys for determination of chemical composition
    IS 1473 : 1960 Methods of chemical analysis of manganese ores
    IS 1474 : 1959 Commercial refrigerators
    IS 1475 : 1978 Specification for Self-contained Drinking Water Coolers
    IS 1475 : Part 1 : 2001 Self-Contained Drinking Water Coolers – Specification – Part 1 : Energy Consumption and Performance
    IS 1476 : 1979 Domestic refrigerators (mechanically operated)
    IS 1476 : Part 1 : 2000 Performance of Household Refrigerating Appliance – Refrigerators with or Without Low Temperature Compartment IS 1477 : Part I : 1971 Code of Practice for Painting of Ferrous Metals in Buildings – Part I : Pretreatment
    IS 1477 : Part 2 : 1971 Code of practice for painting of ferrous metals in buildings: Part2 Painting
    IS 1478 : 1992 Specification for clay flooring tile
    IS 1479 : Part 1 : 1960 Methods of test for dairy industry: Part 1 Rapid examination of milk
    IS 1479 : Part 2 : 1961 Method of test for for dairy industry: Part 2 Chemical analysis of milk
    IS 1479 : Part III : 1977 Methods of Test for Dairy Industry – Part III : Bacteriological Analysis of Milk
    IS 1479 : Part 4 : 1977 Methods of test for dairy industry: Part 4 Freezing-point depression of milk Ho rtveet method
    IS 1479 : Part 5 : 1962 Methods of test for dairy industry: Part 5 Methods of dairy plant control
    IS 1480 : 1970 Specification for Metric Scales for General Purposes
    IS 1481 : 1970 Specification for Metric Steel Scales for Engineers
    IS 1483 : 1988 Specification for White Bread
    IS 1484 : 1974 Specification for Rolled Oats (Quick-Cooking Type)
    IS 1485 : 1993 Macaroni, Spaghetti, Vermicelli and Egg Noodles – Specification
    IS 1486 : 1978 Specification for Copper Oxychloride, Technical
    IS 1488 : 1989 Pesticides – 2, 4-D Sodium Salt, Technical – Specification
    IS 1489 : Part 1 : 1991 Specification for Portland pozzolana cement Part 1 Flyash based
    IS 1489 : Part 2 : 1991 Specification for Portland-pozzolana cement Part 2 calcined clay based
    IS 1491 : 1959 Specification for Metric Scales for Architectural Purposes
    IS 1492 : 1970 Metric surveying chains
    IS 1493 : 1959 Methods of Chemical Analysis of Iron Ores
    IS 1493 : Part 1 : 1981 Methods of chemical analysis of iron ores Part 1 Determination of common constituents
    IS 1493 : Part 3 : 1987 Methods of chemical analysis of iron ores Part 3 Determination of titanium, chromium, vanadium, calcium IS 1493 : Part 4 : 1988 Methods of chemical analysis of iron ores Part 4 Determination of aluminium by atomic absorption spectrophotomety
    IS 1493 : Part 5 : 1990 /ISO 4693 : 1986 Methods of Chemical Analysis of Iron ores – Part 5 : Determination of Copper Content-IS 1493 : Part 6 : 1990/ISO 6831 : 1986 Methods of chemical analysis of iron ores Part 6 Determination of sodium and/or potassium IS 1493 : Part 7 : 1993/ISO 8753 : 1987 Methods of chemical analysis of iron ores Part 7 Determination of lead and or zinc content IS 1493 : Part 8 : 1993/ISO 7834 : 1987 Methods of chemical analysis of iron ores Part 8 Determination of arsenic content – Molybdenum IS 1495 : 1970 Specification for mild steel dust-bins
    IS 1498 : 1970 Classification and identification of soils for general engineering purposes
    IS 1499 : 1977 Method for Charpy Impact Test (U-notch) for Metals
    IS 1500 : 1983 Method for Brinell hardness test for metallic materials (Superseding IS 1789:1961, IS 1790:1961 and IS 3054:1965)
    IS 1501 : 2002 Method For Vickers Hardness Test for Metallic Materials
    IS 1501 : Part 1 : 1984 Method for Vickers Hardness Test for Metallic Materials – Part 1 : HV 5 to HV 100
    IS 1501 : Part 2 : 1984 Method for Vickers Hardness Test for Metallic Materials: Part 2 HV 0.2 to less than HV 5
    IS 1501 : Part 3 : 1987 Method for Vickers Hardness Test for Metallic Materials: Part 3 Less than HV 0.2
    IS 1503 : 1988 Wooden packing cases
    IS 1504 : 1996 Beeswax, Crude and Refined – Specification
    IS 1506 : 1977 Specification for Copper Oxychloride Dusting Powders
    IS 1507 : 1977 Specification for Copper Oxychloride Water Dispersible Powder Concentrates
    IS 1508 : 1972 Specification for Extenders for Use in Synthetic Resin Adhesives (Urea-formaldehyde) for Plywood
    IS 1509 : 1972 Specification for Tapioca as Livestock Feed
    IS 1511 : 1979 Specification for Blades for Manually-operated Chaff Cutter
    IS 1513 : 1980 Specification for Wooden Pattern Equipment for Foundries
    IS 1514 : 1990 Methods of sampling and test for quick lime and hydrated lime
    IS 1515 : 1998 Beehives – Specification
    IS 1518 : 1980 Method for gauging of petroleum and liquid petroleum products
    IS 1519 : Part 1 : 1983 Methods for temperature measurement of petroleum and its products, Part I At atmospheric pressure
    IS 1519 : Part 2 : 1983 Methods for temperature measurement of petroleum and its products, Part II Above atmospheric pressure
    IS 1522 : 1998 Fireclay Blocks for Glass Tank Furnace — Specification
    IS 1523 : 1972 Bottom pouring refractories for steel plants
    IS 1524 : 1968 Specification for Refractory Sleeves
    IS 1525 : 1968 Ladle refractories for steel plants
    IS 1526 : 1960 Sizes and Shapes for Firebricks (230 mm Series)
    IS 1527 : 1972 Methods for chemical analysis of high silica refractory materials
    IS 1528 : Part I : 1980 Methods of Sampling and Physical Tests for Refractory Materials – Part I : Determination of Pyrometric Cone IS 1528 : Part II : 1974 Methods of Sampling and Physical Tests for Refractory Materials – Part II : Determination of Refractoriness IS 1528 : Part 3 : 1983 Method of Sampling and Physical Tests for Refractory Materials – Part 3 : Determination of Spalling Resistance
    IS 1528 : Part IV : 1974 Methods of Sampling and Physical Tests for Refractory Materials – Part IV : Determination of Cold Crushing IS 1528 : Part 5 : 1993 /ISO 5014 : 1986 Methods of Sampling and Physical Tests for Refractory Materials – Part 5 : Determination IS 1528 : Part VI : 1974 Methods of Sampling and Physical Tests for Refractory Materials – Part VI : Determination of Permanent IS 1528 : Part VII : 1974 Methods of Sampling and Physical Tests for Refractory Materials – Part VII Methods of Sampling and IS 1528 : Part VIII : 1974 Methods of Sampling and Physical Tests for Refractory Materials – Part VIII : Determination of Apparent IS 1528 : Part 9 : 1995 Methods of Sampling and Physical Tests for Refractory Materials – Part 9 : Determination of Specific Gravity IS 1528 : Part X : 1974 Methods of Sampling and Physical Tests for Refractory Materials – Part X : Determination of Size of Refractory IS 1528 : Part 11 : 1993 Methods of Sampling and Physical Tests for Refractory Materials – Part 11 : Determination of Warpage
    IS 1528 : Part XII : 1974 Methods of Sampling and Physical Tests for Refractory Materials – Part XII : Determination of Bulk Density
    IS 1528 : Part XIII : 1974 Methods of Sampling and Physical Tests for Refractory Materials – Part XIII : Determination of Resistance IS 1528 : Part XIV : 1974 Methods of Sampling and Physical Tests for Refractory Materials – Part XIV : Determination of Sieve IS 1528 : Part 15 : 1991 Method of Sampling and Physical Tests for Refractory Materials – Part 15 : Method for Determination of IS 1528 : Part 20 : 1993 /ISO 5013 : 1985 Methods of Sampling and Physical Tests for Refractory Materials – Part 20 : Determination IS 1528 : Part 16 : 1991 Methods of Sampling and Physical Tests for Refractory Materials – Part 16 : Determination of Thermal IS 1528 : Part 17 : 1993 /ISO 8895 : 1986 Methods of Sampling and Physical Tests for Refractory Materials – Part 17 : Determination IS 1528 : Part 18 : 1993 /ISO 3187 : 1989 Methods of Sampling and Physical Tests for Refractory Materials – Part 18 : Determination IS 1528 : Part 19 : 1991 Methods of Sampling and Physical Tests for Refractory Materials – Part 19 : Determination of thermal expansion
    IS 1529 : 1971 Blast furnace refractories for steel plants
    IS 1530 : 1981 Specification for Baize Cloth
    IS 1531 : 1993 Textiles – Blanketing cloth – Specification
    IS 1534 : Part 1 : 1977 Ballasts for fluorescent lamps:Part 1 For switch start circuits
    IS 1535 : 1979 Specification for Cotton Lining Cloth
    IS 1536 : 2001 Centrifugally Cast (Spun) Iron Pressure Pipes for Water, Gas and Sewage – Specification
    IS 1537 : 1976 Vertically cast iron pressure pipes for water, gas and sewage
    IS 1538 : 1993 Cast iron fittings for pressure pipes for water, gas and sewage
    IS 1540 : Part 1 : 1980 Quicklime and hydrated lime for chemical industries: Part 1 Quick lime
    IS 1540 : Part 2 : 1990 Quicklime and hydrated lime for chemical industries: Part 2 Hydrated lime
    IS 1541 : 1978 Glass filter funnels
    IS 1542 : 1992 Specification for sand for plaster
    IS 1543 : 1964 Specification for Single Cylinder Fuel Injection Pumps
    IS 1544 : 1973 Specification for Cotton Calico
    IS 1545 : 1994 Solid drawn copper and copper alloy tubes for condenser and heat exc hangers – Specification
    IS 1548 : 1981 Manual on Basic Principles of Lot Sampling
    IS 1551 : 1991 Carbon papers for typewriter
    IS 1552 : 1978 Specification for Pitch-Bound Wire Reeds for Jute Looms
    IS 1553 : 1989 Design of Library Buildings – Recommendations Relating to its Primary Elements
    IS 1554 : Part 1 : 1988 PVC insulated (heavy duty) electric cables: Part 1 For working voltages upto and including 1 100 V
    IS 1554 : Part 2 : 1988 Specification for PVC Insulated (Heavy Duty) Electric Cables – Part 2 : for Working Voltages from 3″3 kV IS 1555 : 1990 Textile Machinery – Reeds, pitch-bound for use in cotton looms – Specification
    IS 1559 : 1961 Methods of Chemical Analysis of Ferro-Alloys
    IS 1559 : Part 1 : 1988 Methods of chemical analysis of ferro silicon Part 1 Determination of silicon
    IS 1559 : Part 2 : 1982 Methods of chemical analysis of ferro silicon: Part 2 Determination of carbon
    IS 1559 : Part III : 1982 Methods of Chemical Analysis of Ferrosilicon – Part III : Determination of Sulphur
    IS 1559 : Part 4 : 1982 Methods of chemical analysis of ferro silicon: Part 4 Determination of phosphorus
    IS 1559 : Part 5 : 2003 Chemical Analysis of Ferrosilicon – Part 5 : Determination of Aluminium in Ferrosilicon (Aluminium 0.05 IS 1559 : Part 6 : 1982 Methods of chemical analysis of ferro silicon: Part 6 Determination of calcium
    IS 1559 : Part VII : 1982 Methods of Chemical Analysis of Ferrosilicon – Part VII : Determination of Manganese
    IS 1560 : Part 1 : 1974 Method for estimation of carboxylic acid groups in cellulosic textile materials: Part 1 lodometric method
    IS 1560 : Part 2 : 1974 Method for estimation of carboxylic acid groups in cellulosic textile materials -Sodium chloride: Part 2 sodium IS 1561 : 1989 Set Squares for Use of Drawing Offices – Specification
    IS 1562 : 1962 Specification for Metric Diagonal Scales (Cartographers, Surveyors and Engineers)
    IS 1563 : 1989 Protractors for Use of Drawing Offices – Specification
    IS 1564 : 1988 Method for Quantitative Chemical Analysis of Binary Mixtures of Cellulose Triacetate and Certain other Fibres
    IS 1566 : 1982 Specification for Hard-drawn Steel Wire Fabric for Concrete Reinforcement
    IS 1568 : 1970 Specification for wire cloth for general purposes
    IS 1569 : 1976 Capacitors for use in tubular fluorescent high pressure mercury and low pressure sodium vapour discharge lamp IS 1570 : Part 1 : 1978 Schedules for wrought steels Part 1 Steels specified by tensile and/or yield properties
    IS 1570 : Part II : 1979 Schedules for Wrought Steels – Part II : Carbon Steels (Unalloyed Steels)
    IS 1570 : Part 2 : Sec 1 : 1979 Schedules for Wrought Steels – Part 2 : Carbon Steels (Unalloyed Steels) – Section 1 : Wrought IS 1570 : Part 2 : Sec 2 : 1987 Schedules for Wrought Steels – Part 2 : Carbon Steels (Unalloyed Steels) – Section 2 : Carbon Steel IS 1570 : Part 3 : 1979 Schedules for wrought steels Part 3 Carbon and carbon manganese free cutting steels
    IS 1570 : Part 4 : 1988 Schedules for wrought steels Part 4 Alloy steels (Alloy constructional and spring steels) with specified chemical IS 1570 : Part 5 : 1985 Schedules for Wrought Steels – Part 5 : Stainless and Heat-resisting Steels
    IS 1570 : Part 6 : 1996 Schedules for Wrought Steels – Part 6 : Carbon and Alloy Tool Steels
    IS 1570 : Part 7 : 1992 Schedule for wrought steels Part 7 Steels for elevated temperature service (creep resistant steels)
    IS 1571 : 2001 Aviation Turbine Fuels, Kerosene Type, Jet A-1 – Specification
    IS 1572 : 1986 Specification for Electroplated Coatings of Cadmium on Iron and Steel
    IS 1573 : 1986 Specification for Electroplated Coatings of Zinc on Iron and Steel
    IS 1574 : 1980 Glass weighing bottles
    IS 1575 : 2003 /ISO 4800 : 1998 Laboratory Glassware – Separating Funnels and Dropping Funnels
    IS 1576 : 1992 Solid pressboard for electrical purposes – specification
    IS 1577 : 1989 Tobacco and Tobacco Products – Cigarettes – Specification
    IS 1578 : 1989 Tobacco and Tobacco Products – Smoking Mixtures – Specification
    IS 1579 : 1979 Specification for Handloom Cotton Twills
    IS 1580 : 1991 Specification for bituminous compound for water-proofing and caulking purposes
    IS 1582 : 1968 Method for determination of scouring loss in silk textile materials
    IS 1583 : 1991 Handloom silk dhotis, and printed saris – Specification
    IS 1584 : 1991 Textiles – Silk shirting – Specification
    IS 1586 : 2000 Method for Rockwell Hardness Test for Metallic Material (Scales A-B-C-D-E-F-G-H-K 15N, 30N, 45N, 15T, 30T IS 1587 : 1984 Specification for aviation turbine fuels high flash point type
    IS 1589 : 1994 Oil, cylinder – Specification
    IS 1590 : 2000 Laboratory Glassware – Glass Filter Flasks – Specification
    IS 1592 : 1989 Specification for asbestos cement pressure pipes
    IS 1593 : 1982 Specification for Fuel Oils
    IS 1597 : Part 1 : 1992 Construction of Stone Masonry – Code of Practice – Part 1 : Rubble Stone Masonry
    IS 1597 : Part 2 : 1992 Code of practice for construction of stone masonry: Part 2 Ashlar masonry
    IS 1598 : 1977 Method for Izod Impact Test of Metals
    IS 1599 : 1985 Method for bend test (Superseding IS 1692:1974, IS 3260:1960 and IS 4598:1968)
    IS 1604 : 1994 Aviation gasoline – Specification
    IS 1605 : 1977 Specification for Tapioca Starch, Cotton Textile Industry
    IS 1606 : 1979 Specification for Automobile Lamps
    IS 1607 : 1977 Methods for test sieving
    IS 1608 : 1995 Mechanical testing of metals – Tensile Testing
    IS 1609 : 1991 Code of practice for laying damp-proofing treatment using bitumen felts
    IS 1610 : 2000 – Household Sewing Machines – General Requirements
    IS 1611 : 1960 Method for cotton fibre immaturity count-polarized-light method
    IS 1612 : 1976 Iron powder (reduction grade)
    IS 1613 : 1960 Specification for Milk Bottle Crates
    IS 1615 : 1996 Oil of Himalayan Cedarwood – Specification
    IS 1619 : 1976 Specification for Buffer Band for Cop-Changing Automatic Looms
    IS 1622 : 1981 Methods of sampling and microbiological examination of water
    IS 1623 : 1992 Textiles – Testing of jute fabrics for resistance to attack by micro – organisms
    IS 1624 : 1986 Method of field testing of building lime
    IS 1626 : Part 1 : 1994 Specification for asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing IS 1626 : Part 2 : 1994 Specification for asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing IS 1626 : Part 3 : 1994 Asbestos Cement Building Pipes and Pipe Fittings, Gutters and Gutter Fittings and Roofing Fittings – Specification IS 1628 : 1986 Specification for Axle Oil
    IS 1630 : 1984 Specification for mason’s tools for plaster work and pointing work
    IS 1632 : 1993 Optical instruments – Bubbles – Specification
    IS 1633 : 1979 Methods for testing jute cordages for resistance to attack by micro-organisms
    IS 1634 : 1992 Code of practice for design and construction of wood stairs for houses
    IS 1635 : 1992 Code of practice for field slaking of building lime and preparation of putty
    IS 1637 : 1971 Specification for Cycle Saddle Leather
    IS 1638 : 1969 Specification for Sizes and Fitting of Footwear
    IS 1639 : 1960 Specification for East India Tanned Kips and Skins
    IS 1640 : 1960 Glossary of terms relating to hides, skins and leather
    IS 1641 : 1988 Code of practice for fire safety of buildings (general): General principles of fire grading and classification
    IS 1642 : 1989 Code of practice for fire safety of buildings (general): Details of construction
    IS 1643 : 1988 Code of practice for fire safety of buildings (general): Exposure hazard
    IS 1644 : 1988 Code of practice for fire safety of buildings (general): Exit requirements and personal hazard
    IS 1646 : 1997 Code of practice for fire safety of buildings (general): Electrical installations
    IS 1649 : 1962 Code of practice for design and construction of flues chimneys domestic heating appliances
    SP 1650 : 1973 Standard colours for building and decorative finishes (with supplement)
    IS 1651 : 1991 Stationary cells and batteries, lead-acid type (with tubular positive plates) (superseding IS:541)
    IS 1652 : 1991 Stationary cells and batteries,lead-acid type with plante positive plates (superseding IS:541)
    IS 1654 : 1992 Lead antimony alloys
    IS 1655 : 1991 Zinc alloys – Code of practice for manufacture of pressure die castings
    IS 1656 : 1997 Milk-Cereal Based Weaning Foods – Specification
    IS 1658 : 1977 Specification for fibre hardboards
    IS 1659 : 1990 Specification for block boards
    IS 1660 : Part I : 1982 Specification for Wrought Aluminium Utensils – Part 1 : Cooking table, serving storing and baking utensils
    IS 1660 : Part V : 1966 Specification for Wrought Aluminium Utensils – Part V : Thick Bottom Utensils
    IS 1660 : Part VI : 1980 Specification for Wrought Aluminium Utensils – Part VI : Compartmental Trays
    IS 1660 : Part VII : 1970 Specification for Wrought Aluminium Utensils – Part VII : Box, Lunch
    IS 1661 : 1972 Code of practice for application of cement and cement-lime plaster finishes
    IS 1662 : 1974 Glass liquor bottles
    IS 1664 : 1992 Mineral Mixtures for Supplementing Cattle Feeds – Specification
    IS 1665 : 1977 Specification for Cuprous Oxide Water Dispersible Powder Concentrates
    IS 1667 : 1981 Specification for Toffees
    IS 1668 : 1975 Specification for Lozenges
    IS 1669 : 1960 Specification for Cuprous Oxide Dusting Powders
    IS 1670 : 1991 Textiles – Yarn – Determination of breaking load and elongation at break of single strand
    IS 1671 : 1977 Method for determination of yarn strength parameters of yarn spun on cotton systems
    IS 1672 : 1967 Floating dairy thermometers
    IS 1673 : 1984 Specification for Mild Steel Wire, Cold Heading Quality
    IS 1675 : 1971 Specification for Stearic Acid, Technical
    IS 1676 : 1960 Specification for Oleic Acid, Technical
    IS 1677 : 1968 Agricultural spray hose of rubber with braided textile reinforcement (second revision)
    IS 1678 : 1998 Specification for prestressed concrete poles for overhead power, traction and telecommunication lines
    IS 1679 : 1960 Specification for Sugar Used in Food Preservation Industry
    IS 1680 : 1982 Code of practice for treatment of water for low and medium pressure land boilers
    IS 1681 : 1998 Textiles – Hospital Blankets, Woollen, Dyed – Specification
    IS 1682 : 1973 Specification for Cuprous Oxide, Technical (Fungicidal Grade)
    IS 1683 : 1994 Barytes for rubber industry (second revision)
    IS 1684 : 1994 Red oxide of iron for rubber industry – Specification (Second Revision)(Superseding IS 8219 : 1976)
    IS 1685 : 1975 Whiting for rubber industry (first revision)
    IS 1687 : 1991 Textiles – Silk kora (loomstate) cloth – Specification
    IS 1689 : 1973 Method for determination of barium activity number of cotton textile materials
    IS 1691 : 1980 Specification for Cast Iron and Mild Steel Flat Pulleys
    IS 1694 : 1994 Tartrazine, Food Grade – Specification
    IS 1695 : 1994 Sunset Yellow, Food Grade – Specification
    IS 1697 : 1994 Erythrosine, Food Grade – Specification
    IS 1698 : 1994 Indigo Carmine, Food Grade – Specification
    IS 1699 : 1995 Methods of Sampling and Test for Food Colours
    IS 1700 : 1973 Specification for drinking fountains
    IS 1701 : 1960 Specification for mixing valves for ablutionary and domestic purposes
    IS 1702 : 1967 Specification for Spring Balances
    IS 1703 : 2000 Water Fittings – Copper Alloy Float Valves (Horizontal Plunger Type) – Specification
    IS 1705 : 1972 Specification for Aluminium Foil for Milk Bottle Caps
    IS 1706 : 1972 Method for determination of resistance to wear by abrasion of natural building stones
    IS 1707 : 1979 Specification for wood wool for general packaging purposes
    IS 1708 : Parts 1 to 18 : 1986 Methods of Testing of Small Clear Specimens of Timber
    IS 1709 : 1984 Specification for Capacitors for Electric Fan Motors
    IS 1710 : 1989 Specification for Pumps – Vertical Turbine Mixed and Axial Flow, for Clear Cold Water
    IS 1711 : 1984 Specification for self-closing taps for water supply purposes
    IS 1712 : 1982 Specification for Cottonseed Oilcake as Livestock Feed Ingredient
    IS 1713 : 1986 Specification for Decorticated Groundnut Oilcake as Livestock Feed Ingredient
    IS 1715 : 1986 Dimensions for self-holding tapers
    IS 1716 : 1985 Method for Reverse bend Test for Metallic Wire
    IS 1717 : 1985 Method for Simple Torsion Test for Wire
    IS 1718 : 1988 Specification for Cotton Spindle Tapes
    IS 1719 : 2000 Industrial Textiles – Pressed Wool Felts – Specification
    IS 1720 : 1978 Specification for Cotton Sewing Threads
    IS 1721 : 1970 Specification for Hair Belting Yarn
    IS 1723 : 1973 Specification for Pork
    IS 1725 : 1982 Specification for soil based blocks used in general building construction
    IS 1726 : 1991 Specification for cast iron manhole covers and frames
    IS 1727 : 1967 Methods of test for pozzolanic materials
    IS 1729 : 2002 Cast Iron/Ductile Iron Drainage Pipes and Pipe Fittings for Over Ground Non-Pressure Pipeline Socket and Spigot IS 1730 : 1989 Dimensions for steel plates,sheets strips and flats for general engineering purposes
    IS 1732 : 1989 Dimensions for round and square steel bars for structural and general engineering purposes
    IS 1734 : Parts 1 to 20 : 1983 Methods of Test for Plywood
    IS 1735 : Part I : 1977 Specification for Beehive Stand – Part I : Folding Type
    IS 1735 : Part II : 1978 Specification for Beehive Stand – Part II : Fixed Type
    IS 1736 : 1960 Specification for Honey Extractor, Tangential Type
    IS 1737 : 1976 Specification for Spring Buffers for Cotton Looms
    IS 1739 : 1978 Specification for Cotton Healds for Use in Cotton Looms
    IS 1740 : 1977 Specification for Flat Cotton Wicks
    IS 1741 : 1960 Latex foam rubber products
    IS 1742 : 1983 Code of practice for building drainage
    IS 1743 : 1973 Specification for Mutton and Goat Meat Canned in Brine
    IS 1745 : 1978 Specification for petroleum hydrocarbon solvent
    IS 1746 : 1992 Shoe Polish, Paste – Specification
    IS 1747 : 1972 Nitrogen
    IS 1748 : 1981 Sizes of graphite crucibles
    IS 1749 : 1984 Burnt magnesite refractories
    IS 1750 : 1995 Dead burnt pea magnesite
    IS 1751 : 1984 Fireclay cupola refrectories
    IS 1752 : 1973 Coal dust for use in cast iron foundry
    IS 1754 : 2002 Method for Verification of Vickers Hardness Testing Machines
    IS 1754 : Part 1 : 1986 Method for Verification of Vickers Hardness Testing Machines: Part I HV 0.2 to HV 100
    IS 1754 : Part 2 : 1986 Method for Verification of Vickers Hardness Testing Machines: Part 2 Less than HV 0.2
    IS 1755 : 1983 Method for wrapping test for metallic wire (Superseding IS 3398:1965 and IS 4168:1967)
    IS 1757 : 1988 Method for charpy impact test (V notch) for metallic material
    IS 1758 : 1986 Specification for jute batching oil
    IS 1759 : 1986 Specification for Powrahs
    IS 1760 : Part 1 : 1991 Methods of chemical analysis of limestone, dolomite and allied materials Part 1 Determination of loss on IS 1760 : Part 2 : 1991 Methods of chemical analysis of limestone, dolomite and allied materials Part 2 Determination of silica
    IS 1760 : Part 3 : 1992 Methods of chemical analysis of limestone, dolomite and allied materials Part 3 Determination of iron oxide, IS 1760 : Part 4 : 1991 Methods of chemical analysis of limestone, dolomite and allied materials Part 4 Determination of carbon IS 1760 : Part 5 : 1991 Methods of chemical analysis of limestone, dolomite and allied materials Part 5 Determination of chlorides
    IS 1760 : Part 6 : 2001 Chemical Analysis of Limestone, Dolomite and Allied Materials – Part 6 : Determination of Free Silica
    IS 1762 : Part 1 : 1974 Code for designation of steels, Part I Based on lettter symbols
    IS 1763 : 1961 Specification for Substances of Paper and Pulp Board
    IS 1764 : 1961 Specification for Trough Compass
    IS 1765 : 1980 Direct current potentiometers
    IS 1766 : 1998 Time Switches for Metering and Load Control
    IS 1767 : 1980 Specification for Dicalcium Phosphate for Dentifrice
    IS 1769 : Part 1 : 1994 Cigars and Cheroots – Specification – Part 1 : Cigars
    IS 1769 : Part 2 : 1994 Cigars and Cheroots – Specification – Part 2 Cheroots
    IS 1771 : 1986 Electroplated coatings of silver and silver alloys for general engineering purposes
    IS 1772 : 1973 Eletroplated coatings of copper
    IS 1773 : 1982 Electroplated coatings of brass
    IS 1774 : 1986 Specification for Paper for Permanent and Semi-Permanent Records
    IS 1775 : 1981 Specification for Base Paper for Sensitized Paper
    IS 1776 : 1989 Folding Box Board, Uncoated – Specification
    IS 1777 : 1978 Industrial luminaire with metal reflectors
    IS 1778 : 1980 Reels and drums for bare conductors (superseding IS:2889)
    IS 1779 : 1961 Specification for 4-metre, Levelling Staff, Folding Type
    IS 1780 : 1961 Specification for Vegetable Tallow
    IS 1781 : 1975 Specification for Urea, Technical
    IS 1783 : Part 1 : 1993 Drums, Large, Fixed Ends – Specification – Part 1 : Grade A Drums
    IS 1783 : Part 2 : 1988 Drums, large, fixed ends, Part 2 Grade B drums
    IS 1784 : 1998 Screwed closures for drums
    IS 1785 : Part I : 1983 Specification for Plain Hard-drawn Steel Wire for Prestressed Concrete – Part I : Cold Drawn Stress-relieved IS 1785 : Part 2 : 1983 Specification for plain hard-drawn steel wire for prestressed concrete: Part 2 As drawn wire
    IS 1786 : 1985 Specification for high strength deformed steel bars and wires for concrete reinforcement (superseding IS:1139-1966)
    IS 1791 : 1985 General Requirements for Batch Type Concrete Mixers
    IS 1793 : 1973 Guide for marking textile materials made of wool
    IS 1794 : 1971 Specification for Shuttles for Plain Calico Looms
    IS 1795 : 1982 Specification for Pillar Taps for Water Supply Purposes
    IS 1796 : 1986 Specification for Glycerine
    IS 1797 : 1985 Methods of Test for Spices and Condiments
    IS 1798 : 1982 Specification for Black Pepper, whole and Ground
    IS 1799 : 1981 Specification for Citral
    IS 1800 : 1989 Perfumery Material – Geraniol – Specification
    IS 1801 : 1997 Citronellol – Specification
    IS 1802 : 1993 Ionone – Specification
    IS 1803 : 1973 Specification for Cotton Embroidery Threads
    IS 1804 : 1996 Steel wire ropes – Fibre main cores- Specification
    IS 1805 : 1973 Glossary of terms relating to stones, quarrying and dressing
    IS 1806 : 1975 Specification for Malted Milk Foods
    IS 1807 : 1961 Method for determination of colour fastness of textile materials to formaldehyde
    IS 1809 : 1979 Nickel salts for electroplating
    IS 1811 : 1984 Methods of sampling foundry sands
    IS 1812 : 1982 Specification for Carbon Steel Wire for the Manufacture of Wood Screws
    IS 1813 : 1961 Code of practice for treatment of water for marine boilers
    IS 1814 : 1990 Handloom cotton mootus, striped or checked – Specification
    IS 1815 : 1985 Methods for detection and estimation of damage in cotton yarn and cordage due to micro-organisms
    IS 1817 : 1961 Methods of sampling non-ferrous metals for chemical analysis
    IS 1820 : 1979 Recommended shapes and sizes for aluminium notched bars and ingots for remelting purposes
    IS 1821 : 1987/ISO 273 : 1979 Dimensions for clearance holes for bolts and screws
    IS 1823 : 1980 Specification for floor door stoppers
    IS 1824 : 1978 Specification for Insecticidal Space Spray
    IS 1825 : 1983 Specification for Aluminium Alloy Milk Cans
    IS 1826 : 1961 Specification for Venetian Blinds for Windows
    IS 1827 : 1989 Pesticides – Dimethyl Amine SL Salts of 2, 4-D – Specification
    IS 1828 : Part 1 : 1991 /ISO 7500-1 : 1986 Metallic Materials – Verification of Static Uniaxial Testing Machines – Part 1 : Tensile IS 1828 : Part 2 : 2002/ISO 7500-2 : 1996 Metallic Materials – Verification of Static Uniaxial Testing Machines – Part 2 : Tension IS 1829 : Part 1 : 1978 Specification for library furniture and fittings: Part 1 Timber
    IS 1829 : Part 2 : 1993 Specification for library furniture and fittings: Part 2 Steel
    IS 1830 : 1982 Technical supply conditions for milling cutters
    IS 1832 : 1978 Specification for Malathion, Technical
    IS 1833 : 1980 Specification for Diazinon, Technical
    IS 1834 : 1984 Specification for Hot Applied Sealing Compounds for Joints in Concrete
    IS 1835 : 1976 Specification for Round Steel Wire for Ropes
    IS 1837 : 1966 Specification for fanlight pivots
    IS 1838 : Part 1 : 1983 Specification for preformed fillers for expansion joint in pavements and structures (non extruding and resilient IS 1838 : Part 2 : 1984 Specification for preformed fillers for expansion joint in pavements and structures (non extruding and resilient IS 1839 : 1961 Specification for Toluene, Reagent Grade
    IS 1840 : 1961 Specification for Benzene, Reagent Grade
    IS 1842 : 1961 Specification for Surveying Chain Pins (Arrows)
    IS 1843 : 1963 Specification for Nylon Monofilaments
    IS 1844 : 1993 Bristles – Specification
    IS 1848 : 1991 Writing and printing paper
    IS 1849 : Part 1 : Sec 1 : 1990 Design and installation of vertical mixed-feed lime kiln guide : Part 1 Lime stone Section 1 Masonry IS 1849 : Part 1 : Sec 2 : 1991 Design and installation of vertical mixed feed type lime kiln guide: Part 1 For limestone Section 2 IS 1849 : Part 2 : 1977 Guide for design and installation of vertical mixed-feed type lime kiln: Part 2 For limeshell
    IS 1850 : 1961 Dimensions for shank diameters and driving squares for rotating tools
    IS 1851 : 1997 Single Operator type arc welding transformers
    IS 1852 : 1985 Rolling and cutting tolerances for hot rolled steel products
    IS 1853 : 1961 Specification for Self-indicating and Semi-Self-Indicating Counter Type Weighing Machines
    IS 1854 : 1964 Person-weighing machines
    IS 1855 : 1977 Stranded steel wire ropes for winding and man riding haulages in mines
    IS 1856 : 1977 Specification for Steel Wire Ropes for Haulage Purposes
    IS 1857 : 1972 Specification for Tarred Hemp Marline, Two-ply
    IS 1861 : Part 1 : 1990 Guide for manufacture of lime in vertical mixed-feed type kiln: Part 1 From lime-stone
    IS 1861 : Part 2 : 1977 Guide for manufacture of lime in vertical mixed-feed type kiln: Part 2 From limeshell
    IS 1862 : 1975 Specification for Studs
    IS 1863 : 1979 Hot rolled steel bulb flats
    IS 1864 : 1979 Hot-rolled steel L-sections for shipbuilding
    IS 1865 : 1991 Iron castings with spheroidal or nodular graphite
    IS 1866 : 2000 Code of Practice for Electrical Maintenance and Supervision of Mineral Insulating Oil in Equipment
    IS 1867 : 1975 Rubber hot water bottles (first revision)
    IS 1868 : 1996 Anodic Coatings on Aluminium and its Alloys – Specification
    IS 1869 : 1961 Specification for Ice Cans
    IS 1870 : 1965 Comparison of Indian and overseas standards for wrought steels for general engineering purposes
    IS 1871 : Part 1 : 1987 Commentary on Indian Standard Schedules for Wrought Steels – Part 1 : Steels Specified by Tensile and/IS 1871 : Part 2 : 1987 Commentary on Indin Standard Schedules for wrought steels Part 2 Carbon steels (unalloyed steels) (Complementary IS 1871 : Part 3 : 1987 Commentary on Indian Standard Schedules for Wrought Steels – Part 3 : Carbon and Carbon Manganese IS 1872 : 1961 Thinner for synthetic paints and varnishes for aircrafts
    IS 1873 : 1961 Specification for Thinner, Antichill for Cellulose Nitrate Based Paints, Dopes and Lacquers for Aircrafts
    IS 1874 : 1992 Ready mixed paint, universal zinc chrome, priming (synthetic) for light alloys
    IS 1875 : 1992 Carbon steel billets, blooms, slabs and bars for forgings
    IS 1876 : 1961 Method for Voltage Measurement by Means of Sphere-gaps (One Sphere Earthed)
    IS 1877 : 1985 Terminology for Spices and Condiments
    IS 1878 : Part 1 : 1993 Test chart for general purpose parallel lathes:Part 1 Lathes with swing over bed up to 800 mm
    IS 1878 : Part 2 : 1992 Test chart for general purpose parallel lathes:Part 2 Lathes with swing over bed over uo to 800 mm and IS 1878 : Part 3 : 1998 Test chart for general purpose parallel lathes Part 3: Lathes with swing over bed over 1600mm ad upto IS 1879 : 1987 Malleable cast iron pipe fittings
    IS 1880 : 1977 Zinc oxide and zinc salts for electroplating
    IS 1881 : 1998 Code of Practice for Indoor Installation of Public Address Systems
    IS 1882 : 1993 Code of practice for outdoor installation of public address system
    IS 1883 : 1983 Specification for metal shelving racks adjustable type
    IS 1884 : 1993 Automotive vehicles – Electric horns – Specification
    IS 1885 : Part 1 : 1961 Electrotechnical vocabulary: Part 1 Fundamental definitions
    IS 1885 : Part 3 : Sec 1 : 1965 Electrotechnical vocabulary: Part 3 Acoustics, Sec 1 Physical acoustics
    IS 1885 : Part III : Sec 2 : 1966 Electrotechnical Vocabulary – Part III : Acoustics – Section 2 : Acoustical and Electro-Acoustical IS 1885 : Part 3 : Sec 4 : 1966 Electrotechnical vocabulary: Part 3 Acoustics, Sec 4 Sonics, ultrasonics and underwater acoustics
    IS 1885 : Part 3 : Sec 5 : 1966 Electrotechnical vocabulary: Part 3 Acoustics, Sec 5 Speech and hearing
    IS 1885 : Part III : Sec 6 : 1967 Electrotechnical Vocabulary – Part III : Acoustics – Section 6 : Acoustical Instruments
    IS 1885 : Part 3 : Sec 7 : 1978 Electrotechnical vocabulary: Part 3 Acoustics, Sec 7 Music
    IS 1885 : Part 3 : Sec 8 : 1974 Electrotechnical vocabulary: Part 3 Acoustics, Sec 8 Architectural acoustics
    IS 1885 : Part 4 : Sec 1 : 1973 Electrotechnical vocabulary: Part 4 Electron tubes, Sec 1 Common terms
    IS 1885 : Part 4 : Sec 2 : 1973 Electrotechnical vocabulary: Part 4 Electron tubes,Sec 2 X-ray tubes
    IS 1885 : Part 4 : Sec 3 : 1970 Electrotechnical vocabulary: Part 4 Electron tubes, Sec 3 Microwave tubes
    IS 1885 : Part 4 : Sec 4 : 1970 Electrotechnical vocabulary: Part 4 Electron tubes, Sec 4 Cathode-ray tubes
    IS 1885 : Part 4 : Sec 5 : 1972 Electrotechnical vocabulary: Part 4 Electron tubes, Sec 5 Pulse terms
    IS 1885 : Part 4 : Sec 6 : 1972 Electrotechnical vocabulary: Part 4 Electron tubes, Sec 6 Noise in microwave tubes
    IS 1885 : Part 4 : Sec 7 : 1973 Electrotechnical vocabulary: Part 4 Electron tubes, Sec 7 Camera tubes
    IS 1885 : Part 4 : Sec 8 : 1973 Electrotechnical vocabulary: Part 4 Electron tubes, Sec 8 Photosensitive devices
    IS 1885 : Part 6 : 1978 Electrotechnical vocabulary: Part 6 Printed circuits
    IS 1885 : Part 7 : 2001 Electrotechnical Vocabulary – Part 7 : Semiconductor Devices and Integrated Circuits
    IS 1885 : Part 7 : Sec 1 : 1970 Electrotechnical vocabulary: Part 7 Semiconductor devices, Sec 1 General
    IS 1885 : Part VII : Sec 2 : 1970 Electrotechnical Vocabulary – Part VII : Semiconductor Devices – Section 2 : Diodes
    IS 1885 : Part 7 : Sec 3 : 1970 Electrotechnical vocabulary: Part 7 Semiconductor devices, Sec 3 Transistors
    IS 1885 : Part VII : Sec 4 : 1969 Electrotechnical Vocabulary – Part VII : Semiconductor Devices – Section VII : Thyristors
    IS 1885 : Part VII : Sec 5 : 1971 Electrotechnical Vocabulary – Part VII : Semiconductor Devices – Section 5 : Integrated Circuits IS 1885 : Part 7 : Sec 6 : 1984 Electrotechnical vocabulary: Part 7 Semiconductor devices, Sec 6 Optoelectronic devices
    IS 1885 : Part 8 : 1986 Electrotechnical Vocabulary – Part 8 : Secondary Cells and Batteries
    IS 1885 : Part 9 : 1992/IEC 50-446 : 1983 Electrotechnical Vocabulary: Part 9 Electrical relays
    IS 1885 : Part 10 : 1993/IEC 50-448 : 1987 Electrotechnical Vocabulary: Part 10 Power system protection
    IS 1885 : Part 11 : 1966 Electrotechnical vocabulary: Part 11 Electrical measurements
    IS 1885 : Part 12 : 1966 Electrotechnical vocabulary: Part 12 Ferrimagnetic oxide materials
    IS 1885 : Part 14 : 1967 Electrotechnical vocabulary: Part 14 Nuclear power plants
    IS 1885 : Part 15 : 2003 Electrotechnical Vocabulary – Part 15 : Primary Cells and Batteries
    IS 1885 : Part XVI : Sec 1 : 1968 Electrotechnical Vocabulary – Part XVI : Lighting – Section I General Aspects
    IS 1885 : Part XVI : Sec 2 : 1968 Electrotechnical Vocabulary – Part XVI : Lighting – Section 2 : General Illumination, Lighting Fittings IS 1885 : Part XVI : Sec 3 : 1967 Electrotechnical Vocabulary – Part XVI : Lighting – Section 3 : Lamps and Auxiliary Apparatus
    IS 1885 : Part 18 : 1967 Electrotechnical vocabulary: Part 18 General terms of radio-communications
    IS 1885 : Part 19 : 1967 Electrotechnicalvocabulary: Part 19 Radio communication circuits
    IS 1885 : Part 20 : 1967 Electrotechnical vocabulary: Part 20 Radio-wave propagation
    IS 1885 : Part 21 : Sec 1 to 6 : 1988 Electrotechnical Vocabulary – Part 21 : Antennas
    IS 1885 : Part 22 : 1967 Electrotechnical vocabulary: Part 22 Equipment for radio communications, transmitting and receiving
    IS 1885 : Part 23 : 1967 Electrotechnical vocabulary: Part 23 Radio telegraphy and mobile radio
    IS 1885 : Part 24 : 1967 Electrotechnical vocabulary: Part 24 Broadcasting, sound and television
    IS 1885 : Part 25 : 1967 Electrotechnical vocabulary: Part 25 Radiolocation and radio navigation
    IS 1885 : Part XXVI : 1968 Electrotechnical Vocabulary – Part XXVI : Telecommunication Relays
    IS 1885 : Part 27 : 1993 Electrotechnical Vocabulary – Part 27 : Power Electronics
    IS 1885 Part XVII : 1979 Electrotechnical Vocabulary – Part XVII : Switchgear and Controlgear
    IS 1885 : Part 28 : 1993/IEC 50-321 : 1986 Electrotechnical vocabulary: Part 28 Instrument transformers
    IS 1885 : Part 29 : 1971 Electrotechnical vocabulary: Part 29 Mining terms
    IS 1885 : Part 30 : 1971 Electrotechnical vocabulary: Part 30 Overhead transmission and distribution of electrical energy
    IS 1885 : Part 31 : 1971 Electrotechnical vocabulary: Part 31 Magnetism
    IS 1885 : Part 32 : 1993/IEC 50-461 : 1984 Electrotechnical Vocabulary: Part 32 Electric cables
    IS 1885 : Part 34 : 1972 Electrotechnical vocabulary: Part 34 Cinematography
    IS 1885 : Part 35 : 1993 /IEC Pub 50 : 411 : 1973 Electrotechnical Vocabulary – Part 35 : Rotating Machines
    IS 1885 : Part 36 : 1972 Electrotechnical vocabulary: Part 36 Interference
    IS 1885 : Part 37 : 1993/IEC PUB 50-691 : 1973 Electrotechnical vocabulary: Part 37 Tariffs for electricity
    IS 1885 : Part 38 : 1993 /IEC Pub 50 : 421 : 1990 Electrotechnical Vocabulary – Part 38 : Power Transformers and Reactors
    IS 1885 : Part 39 : 1999 Electrotechnical Vocabulary – Part 39 : Dependability of Electronic and Electrical Items
    IS 1885 : Part 40 : 1974 Electrotechnical vocabulary: Part 40 Connectors
    IS 1885 : Part XLI : 1975 Electrotechnical Vocabulary – Part XLI : Non-reciprocal Electromagnetic Components
    IS 1885 : Part 42 : 1993/IEC 50-436 : 1990 Electrotechnical Vocabulary: Part 42 Power capacitors
    IS 1885 : Part 43 : 1977 Electrotechnical vocabulary: Part 43 Electrical equipment used in medical practice
    IS 1885 : Part 44 : 2001 Electrotechnical Vocabulary – Part 44 : Piezoelectric Devices
    IS 1885 : Part XLV : 1977 Electrotechnical Vocabulary – Part XLV : Capacitors
    IS 1885 : Part XLVI : 1977 Electrotechnical Vocabulary – Part XLVI : Resistors
    IS 1885 : Part XLVII : 1977 Electrotechnical Vocabulary – Part XLVII : Digital Electronic Equipment
    IS 1885 : Part XLVIII : Sec 1 : 1978 Electrotechnical Vocabulary – Part XLVIII : Recording – Sec I : Tape Recording
    IS 1885 : Part XLVIII : Sec 2 : 1978 Electrotechnical Vocabulary – Part XLVIII : Recording – Section 2 : Disk Recording
    IS 1885 : Part XLIX : 1978 Electrotechnical Vocabulary – Part XLIX : Industrial Process Measurement and Control
    IS 1885 : Part 50 : 1985 Electrotechnical vocabulary: Part 50 Telecontrol
    IS 1885 : Part 51 : 1993 /IEC Pub 50 : 841 : 1983 Electrotechnical Vocabulary – Part 51 : Industrial Electroheating
    IS 1885 : Part 52 : Sec 2 : 1980 Electrotechnical vocabulary: Part 52 Data processing, Sec 2 Arithmatic and logic operations
    IS 1885 : Part 52 : Sec 3 : 1980 Electrotechnical vocabulary: Part 52 Data processing, Sec 3 Equipment technology (selected terms)
    IS 1885 : Part LII : Sec 7 : 1980 Electrotechnical Vocabulary – Part III : Data Processing – Section 7 : Digital Computer Programming
    IS 1885 : Part 52 : Sec 8 : 1980 Electrotechnical vocabulary: Part 52 Data processing, Sec 8 Control, input-output and arithmatic IS 1885 : Part 52 : Sec 9 : 1980 Electrotechnical vocabulary: Part 52 Data processing, Sec 9 Data media, storage and related equipment
    IS 1885 : Part 52 : Sec 10 : 1980 Electrotechnical vocabulary: Part 52 Data processing, Sec 10 Data communication
    IS 1885 : Part 52 : Sec 11 : 1981 Electrotechnical vocabulary: Part 52 Data processing, Sec 11 Operating technique and facilities
    IS 1885 : Part 52 : Sec 14 : 1983 Electrotechnical Vocabulary – Part 52 Data Processing Section 14 Computer Graphics and Computer IS 1885 : Part LII : Sec 13 : 1980 Electrotechnical Vocabulary – Part LII : Data Processing – Section 13 : Analog and Hybrid Computing
    IS 1885 : Part 52 : Sec 15 : 1986 Electrotechnical vocabulary: Part 52 Data processing, Sec 15 Programming languages
    IS 1885 : Part LIII : 1980 Electrotechnical Vocabulary – Part LIII : Mica
    IS 1885 : Part 54 : 1993/IEC 50-471 : 1984 Electrotechnical Vocabulary: Part 54 Insulators
    IS 1885 : Part 55 : 1981 Electrotechnical vocabulary: Part 55 Electric fans
    IS 1885 : Part 56 : 1981 Electrotechnical vocabulary: Part 56 Microwave components and accessories [superseding IS 1885(Part IS 1885 : Part 57 : 1993/IEC PUB 50-131 : 1978 Electrotechnical vocabulary: Part 57 Electric and magnetic circuits
    IS 1885 : Part 58 : 1984 Electrotechnical vocabulary: Part 58 Telecommunication channels and networks
    IS 1885 : Part 59 : 1986 Electrotechnical vocabulary: Part 59 Educational or training equipment and systems
    IS 1885 : Part 60 : 1993/IEC 50-426 : 1990 Electrotechnical Vocabulary: Part 60 Electrical apparatus for explosive atmospheres
    IS 1885 : Part 61 : 1985 Electrotechnical Vocabulary - Part 61 : Nuclear Medical Instruments
    IS 1885 : Part 62 : 1993/IEC PUB 50-212 : 1990 Electrotechnical vocabulary: Part 62 Insulating Solids, Liquids and Gases
    IS 1885 : Part 63 : 1985/IEC 50-391 : 1975 Electrotechnical vocabulary: Part 63 Nuclear instrumentation
    IS 1885 : Part 64 : Sec 1 : 1987 Electrotechnical vocabulary: Part 64 Electromagnetic compatibility, Sec 1 General terms
    IS 1885 : Part 64 : Sec 2 : 1987 Electrotechnical vocabulary: Part 64 Electromagnetic compatibility, Sec 2 Specific terms
    IS 1885 : Part 65 : Sec 1 to 5 : 1988 Electrotechnical vocabulary: Part 65 Transmission
    IS 1885 : Part 66 : 1988 Electrotechnical vocabulary: Part 66 Space radio communications
    IS 1885 : Part 67 : 1988 Electrotechnical vocabulary: Part 67 Mechanical structures for electronic equipment
    IS 1885 : Part 68 : 1989 Electrotechnical Vocabulary: Part 68 Surface Acoustic Wave (SAW) Filters
    IS 1885 : Part 69 : 1993/IEC 50-602 : 1983 Electrotechnical Vocabulary: Part 69 Generation, transmission and distribution of electricity IS 1885 : Part 70 : 1993/IEC PUB 50-604 : 1987 Electrotechnidal Vocabulary: Part 70 Generation, transmis sion and distribution IS 1885 : Part 71 : 1993/IEC 50-605 : 1983 Electrotechnical Vocabulary: Part 71 Generation,transmission and distribution of electricity IS 1885 : Part 72 : 1993/IEC 50-101 : 1977 Electrotechnical Vocabulary : Part 72 Mathematics
    IS 1885 : Part 73 : Sec 1 : 1993/IEC 50-111 : 1982 Electrotechnical Vocabulary: Part 73 Physics and chemistry, Section 01 Physicalconcepts
    IS 1885 : Part 73 : Sec 2 : 1993/IEC 50-111 : 1984 Electrotechnical Vocabulary: Part 73 Physics and chemistry - Section 02 Electrotechnical IS 1885 : Part 73 : Sec 3 : 1993/IEC 50-111 : 1977 Electrotechnical Vocabulary: Part 73 Physics and chemistry - Section 03 Concepts IS 1885 : Part 74 : 1993/IEC 50-151 : 1978 Electroechnical Vocabulary: Part 74 Electrical and magnetic devices
    IS 1885 : Part 75 : 1993/IEC 50-351 : 1975 Electrotechnical Vocabulary: Part 75 Automatic control
    IS 1885 : Part 76 : 1993 /IEC Pub 50 (431) (1980) Electrotechnical Vocabulary - Part 76 : Transductors
    IS 1885 : Part 77 : 1993/IEC 50-466 : 1990 Electrotechnical Vocabulary: Part 77 Overhead lines
    IS 1885 : Part 78 : 1993/IEC 50-601 : 1985 Electrotechnical Vocabulary: Part 78 Genereation, transmission and distribution of electricity IS 1885 : Part 79 : 1993/IEC 50-603 : 1986 Electrotechnical Vocabulary: Part 79 Generation, transmission and distribution of electiricity IS 1885 : Part 80 : 1994/IEC 50-301 : 1983 Electrotechnical vocabulary: Part 80 General terms on measurements in electricity
    IS 1885 : Part 81 : 1993 Electrotechnical Vocabulary - Part 81 : Electrical Measuring Instruments
    IS 1885 : Part 82 : 1996 /IEC 50 716-1 : 1995 Electrotechnical Vocabulary - Part 82 : Integrated Services Digital Networks (ISDN)
    IS 1885 : Part 83 : 1999 /IEEE 2000-1 : 1999 Electrotechnical Vocabulary - Part 83 : Year 2000
    IS 1885 : Part 84 : 2001 Electrotechnical Vocabulary - Part 84 : Fire Tests
    IS 1887 : 1985 Specification for Spun Jute Yarn
    IS 1888 : 1982 Method of Load Test on Soils
    IS 1889 : Part 1 : 1976 Method for quantitative chemical analysis of binary mixtures of regenerated cellulose fibre and cotton: Part IS 1889 : Part 2 : 1976 Method for quantitative chemical analysis of binary mixtures of Regenerated Cellulose Fibres and Cotton IS 1889 : Part III : 1979 Method for Quantitative Chemical Analysis of Binary Mixtures of Regenerated Cellulose Fibres and Cotton IS 1889 : Part 4 : 1979 Method for quantitative chemical analysis of binary mixtures of Regenerated Cellulose Fibres and Cotton IS 1890 : Part 0 : 1995/ISO 31-0 : 1992 Quantities and units : Part 0 General Principles
    IS 1890 : Part 1 : 1995 /ISO 31-1 : 1992 Quantities and Units - Part 1 : Space and Time
    IS 1890 : Part 2 : 1995/ISO 31-2 : 1992 Quantities and Units : Part 2 Periodic and related phenomena
    IS 1890 : Part 3 : 1995/ISO 31-3 : 1992 Quantities and Units : Part 3 Mechanics
    IS 1890 : Part 4 : 2001 /ISO 31-4 : 1992 Quantities and Units - Part 4 : Heat
    IS 1890 : Part 5 : 1995/ISO 31-5 : 1992 Quantities and Units : Part 5 Electricity and magnetism
    IS 1890 : Part 6 : 1997 /ISO 31-6 : 1992 Quantities and Units - Part 6 : Light and Related Electromagnetic Radiations
    IS 1890 : Part 7 : 1995 /ISO 31-7 : 1992 Quantities and Units - Part 7 : Acoustics
    IS 1890 : Part 8 : 1995/ISO 31-8 : 1992 Quantities and Units : Part 8 Physical chemistry and molecular physics
    IS 1890 : Part 9 : 1995/ISO 31-9 : 1992 Quantities and units : Part 9 Atomic and nuclear physics
    IS 1890 : Part 10 : 1995/ISO 31-10 : 1992 Quantities and units : Part 10 Nuclear reactions and ionizing radiations
    IS 1890 : Part 11 : 1995/ISO 31-11 : 1992 Quantities and Units : Part 11 Mathematical signs and symbols for use in the physical IS 1890 : Part 12 : 1995/ISO 31-12 : 1992 Quantites and units : Part 12 Characteristic numbers
    IS 1890 : Part 13 : 1997/ISO 31-13 : 1992 Quantities and units : Part 13 Solid state physics
    IS 1891 : Part 1 : 1994 Conveyor and Elevator Textile Belting - Specification - Part 1 : General Purpose Belting
    IS 1891 : Part 2 : 1993 Conveyor and elevator textile belting - Specification : Part 2 Heat resistant belting
    IS 1891 : Part 3 : 1988 Specification for Rubber Conveyor and Elevator Textile Belting - Part 3 : Oil Resistant Belting
    IS 1891 : Part IV :1978 Specification for Rubber Conveyor and Elevator Belting - Part IV : Hygienic Belting
    IS 1891 : Part 5 : 1993 Conveyor and elevator textile belting - Specification:Part 5 Fire resistant belting for surface application
    IS 1892 : 1979 Code of practice for subsurface investigations for foundations
    IS 1893 : 1984 Criteria for earthquake resistant design of structures
    IS 1893 : Part 1 : 2002 Criteria for Earthquake Resistant Design of Structures - Part 1 : General Provisions and Buildings
    IS 1895 : 1982 Specification for Cotton NEW AR
    IS 1896 : 1987 Specification for Picking Sticks for Overpick Cotton Looms
    IS 1897 : 1983 Copper strip for electrical purposes
    IS 1898 : 1990 Specification for timber for aircraft construction in converted form (finished form)
    IS 1899 : 1977 Specification for Blow Lamps
    IS 1900 : 1974 Method of tests for wood poles
    IS 1901 : 1978 Visual indicator lamps
    IS 1902 : 1993 Code of practice for preservation of bamboo and cane for non-structural purposes
    IS 1903 : 1977 Recommendations on shape and dimensions of jute loom pickers
    IS 1904 : 1986 Code of practice for design and construction of foundations in soils: general requirements
    IS 1905 : 1987 Code of Practice for Structural use of Unreinforced Masonry
    IS 1906 : 1977 Recommendations for shape and dimensions of 4-B pickers
    IS 1907 : 1984 Specification for Cardamom (Capsules and Seeds)
    IS 1908 : 1993 Spices and Condiments - Ginger, Whole and Ground - Specification
    IS 1909 : 1992 Indian Curry Powder - Specification
    IS 1912 : 1984 Specification for Country Jute Twine
    IS 1913 : Part 1 : 1978 General and safety requirements for luminaires: Part 1 Tubular fluorescent lamps
    IS 1914 : Parts I to IV : 1982 Specification for Carbon Steel Boiler Tubes and Superheater Tubes
    IS 1916 : 1989 Specification for steel cylinder pipe with concrete lining and coating
    IS 1917 : Part 1 : 1991 Chemical analysis of quartzite and high silica sand Part 1 Determination of loss on ignition
    IS 1917 : Part 2 : 1991 Chemical Analysis of Quartzite and High Silica Sand - Part 2 : Determination of Sodium and Potassium IS 1917 : Part 3 : 1992 Chemical analysis of quartzite and high silica sand Part 3 Determination of silica
    IS 1917 : Part 4 : 1991 Chemical analysis of quartzite and high silica sand Part 4 Determination of aluminium by AAS method
    IS 1917 : Part 5 : 1992 Chemical analysis of quartzite and high silica sand Part 5 determination of iron by AAS method
    IS 1917 : Part 6 : 1992 Chemical analysis of quartzite and high silica sand Part 6 Determination of calcium and magnesium by IS 1917 : Part 7 : 2001 Chemical Analysis of Quartzite and High Silica Sand - Part 7 : Determination of Titania by Spectrophotometric IS 1918 : 1966 Methods of physical tests for foundry sands
    IS 1919 : 1982 Specification for Sodium Hydrosulphite
    IS 1920 : 1987 Hemp lines
    IS 1921 : 1975 Rosin-cored solder wire
    IS 1922 : 1961 Liquid gold, bright
    IS 1923 : 1973 Specification for Cotton Selvedge Tape for Electrical Insulation Purposes
    IS 1925 : 1992 Bidis - Specification
    IS 1927 : 1980 Specification for Flat Driving Chains
    IS 1928 : 1961 Specification for Boiler Rivets (12 to 48 mm Diameter)
    IS 1929 : 1982 Specification for Hot Forged Steel Rivets for Hot Closing (12 to 36 mm Diameter)
    IS 1930 : 1995 Chisels and Gouges - Specification
    IS 1931 : 2000 Engineer's Files - Specification
    IS 1931 : Part 1 : 1985 Specification for Files - Part 1 : Technical Supply Conditions
    IS 1931 : Part 2 : 1985 Specification for Files - Part 2 : Engineers' Files
    IS 1931 : Part 3 : 1985 Specification for Files - Part 3 : Saw Files
    IS 1931 : Part 4 : 1985 Specification for Files - Part 4 : Mill Files
    IS 1931 : Part 5 : 1985 Specification for Files - Part 5 : Special Purpose Files
    IS 1932 : 1986 Specification for Mustard and Rape Seed Oilcake as Livestock Feed Ingredient
    IS 1934 : 1982 Specification for Sesamum Oilcake as Livestock Feed Ingredient
    IS 1935 : 1982 Specification for Linseed Oilcake as Livestock Feed Ingredient
    IS 1937 : 1987 Specification for Handloom Cotton Bleeding Madras
    IS 1938 : 1990 Cotton Cambs for Use in Jute Looms - Specification
    IS 1939 : 1975 Handloom cotton handkerchiefs
    IS 1940 : 1969 Methods of chemical analysis of tin ingot
    IS 1941 : Part 1 : 1976 Functional requirements for electric motor sirens: Part 1 ac 3 phase 50 hz, 415 volts type
    IS 1942 : 1968 Specification For Bone-Meal as Livestock Feed Supplement
    IS 1943 : 1995 Textiles- A-twill jute bags - Specification
    IS 1944 : Parts I and II : 1970 Code of Practice for Lighting of Public Thoroughfares
    IS 1944 : Part 5 : 1981 Code of practice for lighting of public thoroughfare: Part 5 Lighting for grade separated junctions, bridges IS 1944 : Part 6 : 1981 Code of practice for lighting of public thoroughfare: Part 6 Lighting for towns and city centres and areas IS 1944 : Part 7 : 1981 Code of practice for lighting of public thoroughfare: Part 7 Lighting for roads with special requirements (IS 1945 : 1986 Specification for Glass Bottles for Fluid Ink
    IS 1946 : 1961 Code of practice for use of fixing devices in walls, ceilings and of solid construction
    IS 1948 : 1961 Specification for aluminium doors, windows and ventilators
    IS 1949 : 1961 Specification for Aluminium Windows for Industrial Buildings
    IS 1950 : 1962 Code of practice for sound insulation of non-industrial buildings
    IS 1952 : 1963 Methods of chemical analysis of nickel anodes
    IS 1953 : 1973 Methods of chemical analysis of silver anodes
    IS 1954 : 1990 Determination of Length and Width of Woven Fabrics - Methods
    IS 1955 : 1961 Specification for Prismatic Compass, Liquid
    IS 1956 : Part 1 : 1976 Glossary of terms relating to iron and steel Part I General metallurgy, heat treatment and testing
    IS 1956 : Part 2 : 1976 Glossary of Terms Relating to Iron and Steel - Part II : Steel Making
    IS 1956 : Part III : 1975 Glossary of Terms Relating to Iron and Steel - Part III : Hot-Rolled Steel Products (Excluding Sheet and IS 1956 : Part IV : 1975 Glossary of Terms Relating to Iron and Steel - Part IV : Steel Sheet and Strip
    IS 1956 : Part 5 : 1976 Glossary of Terms Relating to Iron and Steel : Part 5 Bright steel bar and steel wire
    IS 1956 : Part 6 : 1976 Glossary of Terms Relating to Iron and Steel : Part 6 Forging (including drop forging)
    IS 1956 : Part VII : 1976 Glossary of Terms Relating to Iron and Steel - Part VII : Wrought Iron
    IS 1956 : Part VIII : 1976 Glossary of Terms Relating to Iron and Steel - Part VIII : Steel Tubes and Pipes
    IS 1957 : 1961 Specification for Prismatic Compasses, Non-liquid
    IS 1958 : 1989 Nickel anodes for electroplating
    IS 1959 : 1994 Silver Anodes for Electroplating - Specification
    IS 1960 : 1979 Specification for Wheatmeal Bread
    IS 1961 : 1968 Glass tableware
    IS 1963 : 1981 Methods for Determination of Threads per Unit Length in Woven Fabrics
    IS 1964 : 2001 Textiles - Methods for Determination of Mass Per Unit Length and Mass Per Unit Area of Fabrics
    IS 1965 : 1972 Specification for Bleaching Earths of Indian Origin Used for Bleaching Vegetable Oils
    IS 1966 : 1975 Methods for determination of bursting strength and bursting distention of fabrics - Diaphragm method
    IS 1967 : 1961 Methods for estimation of residual starch in cotton fabrics after desizing
    IS 1970 : 1995 Crop Protection Equipment - Hand- Operated Compression Knapsack Sprayer - Specification
    IS 1971 : 1996 Crop protection equipment - Hand-operated stirrup-type sprayer - specification
    IS 1973 : 1999 Sugarcane Crushers - Specification
    IS 1974 : 1982 Specification for Cotton Spindle Tapes for Jute Industry
    IS 1975 : 1984 Signal roundels and lenses for use in railways
    IS 1976 : 1976 Specification for Rotary Paddy Weeder, Manually-Operated
    IS 1977 : 1996 Low Tensile Structural Steels - Specification
    IS 1978 : 1982 Line pipe
    IS 1979 : 1985 High test line pipe
    IS 1981 : 1978 Specification for Animal Casings
    IS 1982 : 1971 Code of practice for ante-mortem and post-mortem inspection of meat animals
    IS 1983 : 1985/ISO 241 : 1975 Shank sections for single point turning and planing tools
    IS 1984 : Part I : 1971 Specification for Glass Vials for Pharmaceutical Preparations - Part I : Vials for Parenteral Preparations
    IS 1985 : Part 1 : 1980 Recommended practice for preparation of iron and steel for electroplating Part 1 high carbon steel
    IS 1985 : Part II : 1980 Recommended Practice for Preparation of Iron and Steel for Electroplating - Part II : Low Carbon Steel
    IS 1985 : Part 3 : 1980 Recommended practice for preparation of iron and steel for electroplating Part 3 Iron castings
    IS 1986 : 1981 Code of practice for hard chromium plating on iron and steel for general engineering purposes
    IS 1987 : 1974 High silica sand for use in foundry
    IS 1989 : Part 1 : 1986 Specification for Leather Safety Boots and Shoes - Part 1 : For Miners
    IS 1989 : Part 2 : 1986 Specification for Leather Safety Boots and Shoes - Part 2 : For Heavy Metal Industries
    IS 1990 : 1973 Steel rivet and stay bars for boilers
    IS 1991 : Part 1 : 1987 Safety requirements for the use, care and protection of abrasive grinding wheels:Part 1 Definitions
    IS 1991 : Part 2 : 1987 - Safety Requirements for the Use, Care and Protection of Abrasive Grinding Wheels - Part 2 : Handling IS 1991 : Part 3 : 1987 Safety Requirements for the Use, Care and Protection of Abrasive Grinding Wheels - Part 3 : General Machine IS 1991 : Part 4 : 1988 Safety requirements for the use, care and protection of abrasive grinding wheels:Part 4 Safety guards
    IS 1991 : Part 5 : 1987 Safety requirements for the use, care and protection of abrasive grinding wheels:Part 5 Flanges
    IS 1991 : Part 6 : 1987 Safety Requirements for the use, care and protection of abrasive grinding wheels:Part 6 Inspection and IS 1991 : Part 7 : 1987 Safety requirements for the use, care and protection of abrasive grinding wheels:Part 7 Standard speeds
    IS 1991 : Part 8 : 1987 Safety requirements for the use, care and protection of abrasive grinding wheels:Part 8 Special speeds
    IS 1991 : Part 9 : 1987 Safety requirements for the use, care and protection of abrasive grinding wheels:Part 9 General operating IS 1991 : Part 10 : 1987 Safety requirements for the use, care and protection of abrasive grinding wheels:Part 10 Mounted wheels
    IS 1992 : 1979 Electroplated coatings of lead
    IS 1993 : 1993/ISO 1111-1 : 1983 Single cold reduced tinplate and single cold reduced blackplate - electrolytic and hot dipped IS 1994 : 1987 Specification for Crown Closures
    IS 1995 : 1984/ISO 213 : 1982 Overall internal heights for lathe tool posts
    IS 1996 : 2003 Laboratory Glassware - Straight-Bore Glass Stopcocks for General Purposes
    IS 1997 : 1982 Burettes
    IS 1998 : 1962 Methods of test for thermosetting synthetic resin bonded laminated sheets
    IS 1999 : 1987 Methods of sampling bauxite
    IS 2000 : Part 1 : 1985 Methods of chemical analysis of bauxite Part 1 Determination of loss on ignition
    IS 2000 : Part 2 : 1985 Methods of chemical analysis of bauxite Part 2 Determination of silica
    IS 2000 : Part 3 : 1985 Methods of chemical analysis of bauxite Part 3 Determination of alumina
    IS 2000 : Part 4 : 1985 Methods of chemical analysis of bauxite Part 4 Determination of ferric oxide
    IS 2000 : Part 5 : 1985 Methods of chemical analysis of bauxite Part 5 Determination of titania
    IS 2000 : Part 6 : 1985 Methods of chemical analysis of bauxite Part 6 Determination of vanadium
    IS 2000 : Part 7 : 2001 Chemical Analysis of Bauxite - Part 7: Determination of Phosphorus Pentoxide
    IS 2000 : Part 8 : 1989 Methods of chemical analysis of bauxite Part 8 Determination of manganese by atomic absorption spectrophotometric IS 2000 : Part 9 : 1989 Chemical Analysis of Bauxite - Part 9 : Determination of Magnesium and Calcium by Atomic Absorption IS 2001 : 1968 Specification for Fixed Silvered Mica Capacitors
    IS 2002 : 1992 Steel plates for pressure vessels for intermediate & high temperature service including boilers
    IS 2004 : 1991 Carbon steel forgings for general engineering purposes
    IS 2005 : 1988 Methods for Quantitative Chemical Analysis of Binary Mixtures of Nylon 6 or Nylon 6.6 Fibres and Certain other IS 2006 : 1988 Method for quantitative chemical analysis of binary mixtures of protein fibres with certain other non-protein fibres
    IS 2007 : 1974 Method for Calibration of Vertical Oil Storage Tanks
    IS 2008 : 1961 Method for Computation of Capacity Tables for Vertical Oil Storage Tanks
    IS 2009 : 1975 Method for Calibration of Horizontal and Tilted Oil Storage Tanks
    IS 2010 : 1984 Methods for detection and estimation of damage in jute fabric due to micro-organisms
    IS 2011 : 1984 Methods for detection and estimation of damage in jute yarn and cordage due to micro-organisms
    IS 2012 : 1961 Specification for Red Phosphorus
    IS 2013 : 1995 T-Slots- Dimensions and Spacings
    IS 2014 : 1996 T-bolts - specification
    IS 2015 : 1977 Specification for T-Nuts
    IS 2016 : 1967 Specification for Plain Washers
    IS 2017 : 1967 Methods of Chemical analysis of metallic manganese
    IS 2018 : 1998 Methods of chemical analysis of calcium silicon
    IS 2020 : Part 1 : 1968 Methods of chemical analysis of silico chromium Part 1 analysis of silicon and chromium
    IS 2021 : 1993 Metallic manganese
    IS 2022 : 1997 Calcium silicon
    IS 2023 : 1993 Metallic chromium
    IS 2024 : 1988 Specification for Ferrosilicochromium
    IS 2025 : 1962 Specification for Cylindrical Pipettes for Bacteriological Examination of Milk
    IS 2026 : Part 1 : 1977 Power transformers: Part 1 General
    IS 2026 : Part 2 : 1977 Power transformers: Part 2 Temperature-rise
    IS 2026 : Part 3 : 1981 Power transformers: Part 3 Insulation level and dielectric tests
    IS 2026 : Part 4 : 1977 Power transformers: Part 4 Terminal marking,tappings and connectioins
    IS 2026 : Part 5 : 1994 Power Transformer: Part 5 Transformer/Reactor bushings minimum external clearance in air-specification
    IS 2027 : 1992 Spanners and sockets - Widths across flats
    IS 2028 : 1998 Open-Jaw Wrenches (Spanners) - Specification
    IS 2029 : 1998 Ring Wrenches (Spanners) - Specification
    IS 2030 : 1989 Box Spanners - Specification
    IS 2031 : 1987/ISO 496 : 1973 Driving and driven machines - Shaft heights
    IS 2032 : Part 8 : 1965 Graphical symbols used in electrotechnology: Part 8 Semiconductor devices
    IS 2032 : Part 9 : 1969 Graphical symbols used in electrotechnology: Part 9 Electron tubes (other than microwave tubes)
    IS 2032 : Part XII : 1969 Graphical Symbols Used in Electrotechnology - Part XII : Electro-Acoustic Transducers and Recording IS 2032 : Part 13 : 1971 Graphical symbols used in electrotechnology: Part 13 Microwave tubes
    IS 2032 : Part XIV : 1971 Graphical Symbols Used in Electrotechnology - Part XIV : Microwave Technology
    IS 2032 : Part 15 : 1976 Graphical symbols used in electrotechnology: Part 15 Aircraft electrical symbols
    IS 2032 : Part 16 : 1972 Graphical symbols used in electrotechnology: Part 16 Aerials
    IS 2032 : Part 17 : 1975 Graphical symbols used in electrotechnology: Part 17 Ferrite cores and magnetic storage matrices
    IS 2032 : Part 19 : 1977 Graphical symbols used in electrotechnology: Part 19 Electrical equipment used in medical practice
    IS 2032 : Part 20 : 1977 Graphical symbols used in electrotechnology: Part 20 Radio communication transmission circuits, lines IS 2032 : Part 24 : 1980 Graphical symbols used in electrotechnology: Part 24 Binary logic elements
    IS 2032 : Part 25 : 1980 Graphical symbols used in electrotechnology: Part 25 Electrical installations in ships
    IS 2033 : 1977 Specification for Tapioca Flour, Cotton Textile
    IS 2034 : 1987 Round open top sanitary cans for butter and cheese
    IS 2036 : 1995 Phenolic Laminated Sheets - Specification
    IS 2037 : 1986 Tracing cloth (first revision)
    IS 2039 : Parts 1 to 3 : 1991 Steel Tubes for Bicycle and Cycle Rickshaws - Specification
    IS 2041 : 1995 Steel Plates for Pressure Vessels Used at Moderate and Low Temperature - Specification
    IS 2042 : 1972 Insulating bricks
    IS 2043 : 1984 Siliceous fireclay refreatories
    IS 2044 : 1981 Silimanite refractories for glass melting tank furnaces
    IS 2046 : 1995 Decorative Thermosetting Synthetic Resin Bonded Laminated - Specification
    IS 2047 : 1992 Aluminium alloy hardeners (Master alloys)
    IS 2048 : 1983 Specification for Parallel Keys and Keyways
    IS 2049 : 1978 Colour code for the identification of wrought steels for general engineering purposes
    IS 2050 : 1991 Glossary of terms relating to footwear
    IS 2051 : 1976 Method for Sampling of Leather Footwear
    IS 2052 : 1979 Specification for Compounded Feeds for Cattle
    IS 2053 : 1974 Thermocouple pyrometers
    IS 2054 : 1962 Referance tables for nickel/chromium-nickel/aluminium thermocouples
    IS 2055 : 1962 Reference tables for platinum/rhodium-platinum thermocouples
    IS 2056 : 1962 Reference tables for copper-constantan thermocouples
    IS 2057 : 1962 Reference Tables for Iron-constantan Thermocouples
    IS 2058 : 1973 Specification for Shuttles for Pirn-changing Automatic Cotton looms
    IS 2061 : 1995 Bicycle - Front forks - Specification
    IS 2062 : 1999 Steel for General Structural Purposes - Specification
    IS 2063 : 1988/ISO 230-1 : 1986 Acceptance code for machine tools - Geometric accuracy of machines operating under no-load IS 2063 : Part 1 : 2002 Test Code for Machine Tools - Part 1 : Geometric Accuracy of Machines Operating Under No-load or Finishing IS 2063 : Part 2 : 2002 Test Code for Machine Tools - Part 2 : Determination of Accuracy and Repeatability of Positioning Numerically IS 2064 : 1993 Code of practice for selection, installation and maintenance of sanitary appliances
    IS 2065 : 1983 Code of practice for water supply in buildings
    IS 2066 : 1962 Coding and classification for non-ferrous scrap metals and residues
    IS 2067 : 1975 Wrought aluminium wire for electrical purposes
    IS 2069 : 1991 Drums for covered winding wires and strips for electrical purpose
    IS 2071 : Part 1 : 1993/IEC PUB 60-1 : 1989 High voltage testtechniques: Part 1 General definitions and test requirements
    IS 2071 : Part II : 1974 Methods of High Voltage Testing - Part II : Test Procedures
    IS 2071 : Part 3 : 1976 Methods of high voltage testing: Part 3 Measuring devices
    IS 2072 : 1977 Specification for Comb Foundation Sheets
    IS 2074 : 1992 Ready Mixed Paint, Air Drying, Red Oxide Zinc Chrome, Priming - Specification
    IS 2075 : 2000 - Ready Mixed Paint, Stoving, Red Oxide Zinc Chrome, Priming - Specification
    IS 2076 : 1981 Specification for Unsupported Flexible Polyvinyl Chloride Sheeting
    IS 2077 : 1996 Automotive vehicles - Electric relays - Specification
    IS 2079 : 1982 Graphite for pencil slips
    IS 2080 : 1980 Specification for Stabilized Hydrogen Peroxide
    IS 2081 : 1998 Automotive Vehicles - Taper Terminal Cable Connectors for Batteries - Specification
    IS 2082 : 1993 Stationary storage type electric water heaters
    IS 2083 : 1991 Flashlights
    IS 2084 : 1991 Code for designation of pig iron
    IS 2085 : 1962 Code for designation of ferro alloys
    IS 2086 : 1993 Carriers and bases used in rewirable type electric fuses for voltages upto 650V (Superseding IS 8724)
    IS 2087 : 1988 Square tins for general purpose
    IS 2088 : 1983 Methods for determination of arsenic
    IS 2089 : 1977 Common proofed canvas/duck and paulins (tarpaulins) (second revision)
    IS 2090 : 1983 Specification for high tensile steel bars used in prestressed concrete
    IS 2091 : 1983 Multi-trip glass beer bottles
    IS 2092 : 1983 Specification for Plunger Type Dial Gauges
    IS 2094 : Part 1 : 1996 Specification for heater for bitumen (Tar) and emulsion - Specifications
    IS 2094 : Part 2 : 1999 Specification for Heater for Bitumen (Tar) and Emulsion - Part 2 : Bitumen Sprayer
    IS 2094 : Part 3 : 1999 Heater for Bitumen (TAR) and Emulsion - Specification : Part 3 Emulsion
    IS 2095 : Part 1 : 1996 Specification for gypsum plaster boards Part 1 Plain gypsum plaster boards
    IS 2095 : Part 2 : 2001 Gypsum Plaster Boards - Specification - Part 2 : Coated/Laminated Sypsum Plaster Boards
    IS 2095 : Part 3 : 1996 Specification for gypsum plaster boards Part 3 Reinforced Gypsum plaster boards
    IS 2096 : 1992 Specification for asbestos cement flat sheets
    IS 2097 : 1983 Specification for foam making branch pipe
    IS 2098 : 1997 Specification for asbestos cement building boards
    IS 2099 : 1986 Bushings for alternating voltages above 1 000 Volts
    IS 2100 : 1970 Steel billets, bars and sections for boilers
    IS 2102 : Part 1 : 1993/ISO 2768-1 : 1989 General tolerances Part 1 Tolerances for linear and angular dimensions without individual IS 2102 : Part 2 : 1993/ISO 2768-2 : 1989 General tolerances Part 2 Geometrical tolerances for features without individual tolerance IS 2103 : 1980 Specification for Engineer's Squares
    IS 2104 : 1981 Specification for water meter boxes (domestic type)
    IS 2105 : 1994 Letterpress Ink, Black, General Purpose - Specification
    IS 2109 : 1982 Methods of sampling of dolomite, limestone and other allied materias
    IS 2110 : 1980 Code of practice for in-situ construction of walls, in building soil-cement
    IS 2111 : 1973 Specification for Snuff
    IS 2112 : 2003 Silver and Silver Alloys, Jewellery/Artefacts - Fineness and Marking - Specification
    IS 2113 : 2002 Assaying Silver in Silver and Silver Alloys - Methods
    IS 2114 : 1984 Code of practice for laying in-situ terrazzo floor finish
    IS 2115 : 1980 Code of practice for flat-roof finish, mud phuska
    IS 2116 : 1980 Specification for sand for masonry mortars
    IS 2117 : 1991 Guide for Manufacture of Hand-Made Common Burnt-Clay Building Bricks
    IS 2118 : 1980 Code of Practice for Construction of Jack-Arch Type of Built-up Floor or Roof
    IS 2119 : 1980 Code of practice for construction of brick-cum-concrete composite (madras terrace) floor and roof
    IS 2121 : Part 1 : 1981 Conductors and earth wire accessories for overhead power lines: Part 1 Armour rods, binding wires and IS 2121 : Part 2 : 1981 Conductors and earth wire accessories for overhead power lines: Part 2 Mid span joints and repair sleeves IS 2121 : Part 3 : 1992 Conductors and earthwire accessories for overhead power lines: Part 3 Accessories for earthwire
    IS 2121 : Part 4 : 1991 Conductors and earth wire accessories for overhead power lines : Part 4 Non tension joints
    IS 2122 : Part I : 1973 Code of practice for selection, storage, installation and maintenance of belting for power transmission:Part IS 2122 : Part 2 : 1991 Power transmission - Belts - Code of practice for selection, storage, installation and maintenance of belting IS 2123 : 1977 Vial (goldie) seals
    IS 2124 : 2000 Sodium Bicarbonate - Specification
    IS 2127 : 1984 Specification for Stabilized Methoxy Ethyl Mercury Chloride (MEMC) Concentrate
    IS 2131 : 1981 Method for Standard Penetration Test for Soils
    IS 2132 : 1986 Code of practice for thin walled tube sampling of soils
    IS 2133 : 1983 Specification for wooden tent pins
    IS 2134 : 1981 Round tins for general purposes
    IS 2136 : 1998 Woven Flat Lining Fabrics for Apparels - Specification
    IS 2140 : 1978 Specification for Stranded Galvanized Steel Wire for Fencing
    IS 2141 : 2000 Hot Dip Galvanized Stay Strand - Specification
    IS 2142 : 1992 Bromine, technical
    IS 2144 : 1962 Specification for Hand Operated Bottle Washer
    IS 2145 : 1962 Specification for Hand Bottle Filler
    IS 2146 : 1962 Specification for Hand Operated Cap Sealer for Milk Bottles
    IS 2148 : 1981 Flameproof enclosures for electrical apparatus
    IS 2150 : 1989 Fabrics for Men's and Boys' Woven Dress-Suit, Sportswear, Jacket, Slack and Trouser - Specification
    IS 2151 : 1985 Specification for Maize Germ Oilcake as Livestock Feed Ingredient
    IS 2152 : 1972 Specification for Maize Gluten Feed
    IS 2153 : 1985 Specification for Maize Bran as Livestock Feed Ingredient
    IS 2154 : 1986 Specification for Coconut Oilcake as Livestock Feed Ingredient
    IS 2155 : 1982 Specification for Cold Forged Solid Steel Rivets for Hot Closing (6 to 16 mm Diameter)
    IS 2156 : 1962 Code for packing raw wool for export
    IS 2157 : 1991 Handloom shoddy woollen blankets (Superseding IS 2481:1963)
    IS 2158 : 1991 Handloom viscose staple fibre lungies - Specification
    IS 2159 : 1991 Textile - Handloom Viscose Staple Fibre Shirting - Specification
    IS 2160 : 1991 Textiles - Handloom viscose staple fibre coating - Specification
    IS 2161 : 1996 Coolant pumps for general purpose machine tools - specification
    IS 2164 : 1961 Method for calculation of bulk quantities of petroleum and liquid petroleum products
    IS 2165 : Part 1 : 1977 Insulation coordination: Part 1 Phase to earth insulation coordination principles and rules
    IS 2165 : Part 2 : 1983 Insulation coordination: Part 2 Phase to phase insulation coordination principles and rules
    IS 2166 : 1963 Method for computation of capacity tables for horizontal and tilted oil storage tanks
    IS 2167 : 1983 Specification for Bottle Coolers
    IS 2168 : 1971 Specification for Pomfret Canned in Oil
    IS 2171 : 1999 Specification for portable fire extinguishers,dry powder (cartridge type)
    IS 2172 : 1991 Textiles - Handloom filament rayon saris - Specification
    IS 2173 : 1991 Handloom melton (shoddy) cloth - Specification
    IS 2174 : 1962 Specification for reinforced concrete dust bins
    IS 2175 : 1988 Specification for heat sensitive fire detectors for use in automatic fire alarm system
    IS 2176 : 1988 Textiles - Binary mixtures of cellulose acetate and certain other fibres - Methods for quantitative chemical analysis
    IS 2177 : 1988 Textiles - Binary Mixtures of Cellulose Triacetate and Secondary Cellulose Acetate Fibres - Methods for Quantitative IS 2178 : 1962 Specification for Timber for Use in Aircraft Propeller Construction
    IS 2179 : 1979 Specification for converted timber for lorry bodies
    IS 2180 : 1988 Specification for heavy duty burnt clay building bricks
    IS 2181 : 1973 Specification for Sewing Machine Needles for Household Purposes
    IS 2182 : 1993 Symbols to be given on indication plates of machine tools - Recommendations
    IS 2185 : Part I : 1979 Specification for Concrete Masonry Units - Part I : Hollow and Solid Concrete Blocks
    IS 2185 : Part 2 : 1983 Specification for concrete masonry units: Part 2 Hollow and solid light weight concrete blocks (superseding IS 2185 : Part 3 : 1984 Specification for concrete masonry units Part 3 Autoclaved cellular Aerated concrete blocks (Superseding IS 2186 : 1985 ISO Metric external screw threads for interference fit applications
    IS 2187 : 1982 Specification for Wool Socks
    IS 2189 : 1999 - Selection, Installation and Maintenance of Automatic Fire Detection and Alarm System - Code of Practice
    IS 2190 : 1992 Selection, Installation and Maintenance of First-aid Fire Extinguishers - Code of Practice
    IS 2191 : Part 1 : 1983 Specification for Wooden Flush Door Shutters (Cellular and Hollow Core Type) - Part 1 : Plywood Face IS 2191 : Part 2 : 1983 Specification for wooden flush door shutters (cellular and hollow core type): Part 2 Particle board and hardboard IS 2192 : 1998 Soil Working Equipment - Animal Drawn Mouldboard Plough, Fixed Type - Specification
    IS 2193 : 1986 Specification for Precast Prestressed Concrete Street Lighting Poles
    IS 2194 : 1963 Code for seaworthy packaging of man-made fibre fabrics
    IS 2195 : 1964 Code for inland packaging of man-made fibre fabrics and man-made fibre yarns
    IS 2196 : 1985 Specification for Linen (Flax) Sewing Thread for Aerospace Purposes
    IS 2197 : 2000 Aerospace Textiles - Braided (Plaited) Linen (flax) Lacing Cord - Specification
    IS 2199 : 1989 Radial drilling machines - Test chart
    IS 2200 : 1994 Test chart for milling machines with table of variable height, with horizontal spindle
    IS 2200 : Part 2 : 2002 Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy - Part 2 : Machines IS 2200 : Part 3 : 2002 Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy - Part 3 : Machines IS 2201 : 1994 Test Chart for Milling Machines with Table of Variable Height, with Vertical Spindle
    IS 2202 : Part 1 : 1999 Specification for wooden flush door shutters (solid core type): Part 1 Plywood face panels
    IS 2202 : Part 2 : 1983 Specification for wooden flush door shutters (solid core type): Part 2 Particle board face panels and hardboard IS 2203 : 1993 Specification for wooden cross arms
    IS 2204 : 1962 Code of practice for construction of reinforced concrete shell roof
    IS 2205 : 1962 Specification for Tube Inflated Football Bladder
    IS 2206 : Part 1 : 1984 Flameproof electric lighting fittings: Part 1 Well-glass and bulkhead types
    IS 2206 : Part 2 : 1976 Flameproof electric lighting fittings: Part 2 Fittings using glass tubes
    IS 2206 : Part 3 : 1989 Flameproof electric lighting fittings: Part 3 Fittings Using Fluorescent Lamps and Plastic Covers
    IS 2206 : Part 4 : 1987 Specification for Flameproof Electric Lighting Fittings - Part 4 : Portable Flame-proof Handlamps and Approved IS 2209 : 1976 Specification for mortice locks (vertical type)
    IS 2210 : 1988 Criteria for design of reinforced concrete shell structures and folded plates
    IS 2211 : 1993 Anhydrous, sodium thiosulphate, photographic grade
    IS 2212 : 1991 Code of practice for brickwork
    IS 2214 : 1977 Specification for Silver Nitrate, Pure, and Analytical Reagent
    IS 2215 : 1983 Specification for Starters for Fluorescent Lamps
    IS 2216 : 1985 Specification for Tennis Balls
    IS 2218 : 1999 Speeds and feeds for machine tools
    IS 2219 : 1962 Feeds for Machine Tools
    IS 2220 : 1990 Engineering metrology - Steel straightedges - Specification
    IS 2221 : 1962 Methods of Test for Aminoplastic Moulding Materials
    IS 2222 : 1991 Specification for Burnt Clay Perforated Building Bricks
    IS 2223 : 1983 Dimensions of flange mounted ac induction motors
    IS 2232 : 1967 Specification for Slotted and Castle Nuts
    IS 2233 : 1962 Specification for Straightedges for Drawing Office Use
    IS 2234 : 1989 Ready Idli Mix - Specification
    IS 2236 : 1968 Specification for Prawns/Shrimp Caned in Brine
    IS 2237 : 1997 Prawns (Shrimps) - Frozen - Specification
    IS 2239 : 1971 Specification for Wheat Bran
    IS 2241 : 1976 Specification for Round Leather Belting for Small Machines
    IS 2243 : 1971 Specification for Drill Chucks
    IS 2244 : 1972 Glossary of terms relating to treated fabrics (first revision)
    IS 2245 : 1962 Methods of sampling quartizite
    IS 2246 : 1963 Methods of sampling of fluorspar (flourite)
    IS 2248 : 1992 Glossary of terms relating to clay products for building
    IS 2249 : 1984 Specification for Adhesives (Liquid) for Leather-Beltings
    IS 2250 : 1981 Code of Practice for Preparation and Use of Masonry Mortars
    IS 2251 : 1986 Specification for Plug and Ring Gauges for Self Holding Tapers
    IS 2252 : 2001 Diacetone Alcohol - Specification
    IS 2253 : 1974 Designation for types of construction and mounting arrangement of rotating electrical machines
    IS 2254 : 1985 Dimensions of vertical shaft motors for pumps
    IS 2255 : 1977 Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process)
    IS 2257 : 1989 Paper Adhesives, Liquid Gum and Office Paste Type-Specification
    IS 2258 : 1981 Rolled zinc plate, sheet and strip
    IS 2259 : 1963 Methods of test for determination of insulation resistance of solid insulating materials
    IS 2260 : 1973 Preconditioning, conditioning and testing of solid electrical insulating materials
    IS 2261 : 1975 Lamps for flashlights
    IS 2262 : 1963 Transformers for high voltage luminous discharge tubes
    IS 2263 : 1979 Methods of Preparation of Indicator Solutions
    IS 2264 : 1963 Preferred frequencies for acoustical measurements
    IS 2265 : 1978 Specification for Galvanized Steel Wire Strand for Signaling Purposes
    IS 2266 : 2002 Steel Wire Ropes for General Engineering Purposes - Specification
    IS 2267 : 1995 Polystyrene Moulding and Extrusion Materials - Specification
    IS 2268 : 1994 Electric call bells and buzzers for indoor use
    IS 2269 : 2002 Hexagon Socket Head Cap Screws
    IS 2270 : 1965 Method for assaying of platinum and platinum alloys
    IS 2271 : 1967 Recommended method for spectrographic analysis of platinum
    IS 2275 : 1984 Grades of platinum
    IS 2277 : 1964 Methods of chemical analysis of metallic silicon
    IS 2279 : 1980 Fine silver bar, sheet, wire, granules and token
    IS 2281 : 1983 Method for Verification of Brinell Hardness Testing Machines
    IS 2283 : 2000 Nickel Silver Sheet, Strip Specification
    IS 2284 : 1988 Method for Olfactory Assessment of Natural and Synthetic Perfumery Materials
    IS 2285 : 1991 Engineering Metrology - Measuring Equipment - Cast Iron Surface Plates - Specification
    IS 2286 : 1963 Specification for Pantograph
    IS 2287 : 1970 Specification for Drafting Machines
    IS 2288 : 1963 Specification for Ranging Rods
    IS 2289 : 1976 Specification for 60ø; Dead Centres for Lathes
    IS 2291 : 1990/ISO 3117 : 1977 Tangential keys and keyways
    IS 2292 : 1974 Specification for Taper Keys and Keyways
    IS 2293 : 1974 Specification for Gib-head Keys and Keyways
    IS 2294 : 1986 Specification for Woodruff Keys and Keyways
    IS 2297 : 1997 Gear lubricants, compounded - Specification
    IS 2298 : 1977 Specification for single-barrel stirrup pump for fire fighting purposes
    IS 2301 : 2000 Metallic Silicon - Specification
    IS 2302 : 1989 Tables for alcoholometry by hydrometer method
    IS 2303 : Part 1 : Sec 1 : 1994 Grading Glass for Alkalinity - Part 1 : Hydrolytic Resistance - Section 1 : Hydrolytic Resistance of IS 2303 : Part 1 : Sec 2 : 1994 Grading Glass for Alkalinity - Part 1 : Hydrolytic Resistance - Section 2 : Hydrolytic Resistance of IS 2303 : Part 2 : 1994 Grading glass alkalinity Part 2 Hydrolytic resistance of glass containers
    IS 2304 : 1962 Procedure for inspection and testing of light metals (aluminium and magnesium) and their alloy ingots and castings IS 2305 : 1988 Method for mercurous nitrate test for copper and copper alloys
    IS 2307 : 1977 Specification for Magnesium Powder for Explosive and Pyrotechnic Compositions
    IS 2308 : 1989 Test chart for slotting machines
    IS 2309 : 1989 Code of practice for the protection of buildings and allied structures against lightning
    IS 2310 : 1989 Test chart for shaping machines
    IS 2311 : 1973 Specification for Fat Extraction Apparatus for Milk and Milk Products
    IS 2312 : 1967 Propeller type ac ventilating fans
    IS 2314 : 1986 Specification for Steel Sheet Piling Sections
    IS 2315 : 1978 Specification for Thimbles for Wire Ropes
    IS 2316 : 1990 Methods of preparation of standard solutions for colorimetric and volumetric analysis
    IS 2317 : 1975 Method for gravimetric determination of sulphates
    IS 2318 : 1980 Silver nitrate, photographic grade
    IS 2319 : 1987 Specification for Serge
    IS 2320 : 1963 Methods of measurements for amplitude modulated frequency signal generators (30 kc/s to 30 Mc/s)
    IS 2321 : 1963 Requirements for General Purpose Amplitude Modulated Radio Frequency Signal Generators (30 kc/s to 30 Mc/IS 2322 : 1998 Spices and Condiments - Chilli, Whole and Ground (Powdered) - Specification
    IS 2323 : 1983 Specification for Mustard, Whole and Ground
    IS 2324 : Part 1 : 1985 Bonded abrasive grinding wheels:Part 1 Profiles and types
    IS 2324 : Part 2 : 1985 Bonded Abrasive Grinding Wheels - Part 2 : Dimensions
    IS 2325 : 1981 Ignition coils for battery-coil ignition systems for automobiles
    IS 2326 : 1987 Specification for Automatic Flushing Cisterns for Urinals (Other than Plastic Cisterns)
    IS 2327 : 1993/ISO 14 : 1982 Straight sided splines for cylindrical shafts with internal centering - Dimensions, tolerances and verification
    IS 2328 : 1983 Method for flattening test on metallic tubes
    IS 2329 : 1985 Method for bend test on metallic tubes (in full section)
    IS 2330 : 1986 Method for flanging test on metallic tubes
    IS 2333 : 1992 Plaster of paris for ceramic industry
    IS 2334 : 2001 ISO General Purpose Metric Screw Threads - Gauges and Gauging
    IS 2335 : 1985 Method of Drift Expanding Test on Metallic Tubes
    IS 2336 : 1963 Specification for Stainless Steel Milk Vats
    IS 2338 : Part 1 : 1967 Code of practice for finishing of wood and wood based materials: Part 1 Operations and workmanship
    IS 2338 : Part 2 : 1967 Code of practice for finishing of wood and wood based materials: Part 2 Schedules
    IS 2339 : 1963 Specification for Aluminium Paint for General Purposes, in Dual Container
    IS 2340 : 1972 Dimensions for self-release 7/24 tapers for milling arbors and tool shanks
    IS 2341 : 1963 Specification for Large Metric Capacity Calibrating Measures (Non-tilting Type)
    IS 2342 : 1963 Specification for Manually Operated Milk Can Washer
    IS 2343 : 1963 Specification for Can Washing Trough
    IS 2344 : 1994 Flake Type Chewing Tobacco (ZARDA ) - Specification
    IS 2346 : 1992 Carbonated Beverages - Specification
    IS 2347 : 1995 Domestic Pressure Cookers - Specification
    IS 2349 : 1963 Method for determination of wettability of cotton fabrics
    IS 2350 : 1963 Method for estimation of residual chlorine in cotton textile materials
    IS 2351 : 1988 Specification for Marble Stoppered Aerated Water Glass Bottles
    IS 2358 : 1984 Specification for Formulations Based on Stabilized Methoxy Ethyl Mercury Chloride (MEMC) Concentrate
    IS 2360 : 1977 Specification for Jerseys, Y-Neck, Plain-Knitted, Worsted
    IS 2361 : 2002 Bulldog Grips - Specification
    IS 2362 : 1993 Determination of Water by Karl Fischer Method - Test Method
    IS 2363 : 1981 Glossary of terms relating to wire ropes
    IS 2364 : 1987 Glossary of textile terms - Woven fabrics
    IS 2365 : 1977 Specification for Steel Wire Suspension Ropes for Lifts, Elevators and Hoists
    IS 2366 : 1983 Code of practice for nail-jointed timber construction
    IS 2367 : 1981 Test chart for box type vertical drilling machines
    IS 2368 : 1993 /ISO 2433 : 1984 Test Charts for External Cylindrical Grinding Machines with a Movable Table
    IS 2369 : 1967 Method for Determination of Absorbency of Absorbent Textile Materials
    IS 2370 : 1963 Specification for Sectional Cold Rooms (Walk-in Type)
    IS 2372 : 1991 Specification for timber for cooling towers
    IS 2373 : 1981 Specification for Water Meters (Bulk Type)
    IS 2374 : 1963 Specification for Ice Tanks
    IS 2376 : 1963 Colour code for the identification of copper & copper alloys
    IS 2377 : 1967 Tables for volume of cut sizes of timber
    IS 2378 : 1974 Code for designation of copper and copper alloys
    IS 2379 : 1990 Colour code for identification of pipe lines
    IS 2380 : Parts I to XXI : 1977 Methods of Test for Wood Particle Boards and Boards from Other Lignocellulosic Materials
    IS 2380 : Part 22 : 1981 Method of test for wood particle boards and boards from other lignocellulosic materials: Part 22 Determination IS 2380 : Part 23 : 1981 Method of test for wood particle boards and boards from other lignocellulosic materials: Part 23 Vibration IS 2381 : 1978 Recommendations for bibliographical references: Essential and supplementary elements
    IS 2382 : 1970 Mounting Dimensions of Loudspeakers
    IS 2383 : 1963 Code of Practice for Calibration of Vehicle Tanks for Petroleum Products and Other Liquids
    IS 2384 : 1963 Tin anodes for electroplating
    IS 2385 : 1977 Specification for Hot-Rolled Mild Steel Sheet and Strip in Coil Form for Cold-Reduced Tinplate and Cold-Reduced IS 2386 : Part I : 1963 Methods of Test for Aggregates for Concrete - Part I : Particle Size and Shape
    IS 2386 : Part 2 : 1963 Methods of test for aggreegates for concrete Part 2 Estimation of deleterious materials and organic impurities
    IS 2386 : Part 3 : 1963 Methods of test for aggregates for concrete Part 3 Specific gravity, density, voids, absorption and bulking
    IS 2386 : Part 4 : 1963 Methods of test for aggregates for concrete Part 4 Mechanical properties
    IS 2386 : Part V : 1963 Methods of Test for Aggregates for Concrete - Part V : Soundness
    IS 2386 : Part 6 : 1963 Methods of test for aggregates for concrete : Part 6 Measuring mortar making properties of fine aggregates
    IS 2386 : Part VII : 1963 Methods of Test for Aggregates for Concrete - Part VII : Alkali Aggregate Reactivity
    IS 2386 : Part VIII : 1963 Methods of Test for Aggregates for Concrete - Part VIII : Petrographic Examination
    IS 2387 : 1969 Methods for Determination of Weight of Jute Fabrics
    IS 2388 : 1971 Specification for Slotted Grub Screws
    IS 2390 : 1967 Methods for chemical analysis of foundry nickel
    IS 2391 : 1970 Foundry nickel
    IS 2393 : 1980 Specification for Cylindrical Pins
    IS 2394 : 1984 Code of practice for application of lime plaster finish
    IS 2395 : Part 1 : 1994 Painting of Concrete, Masonry and Plaster Surfaces - Code of Practice - Part 1 : Operations and Workmanship
    IS 2395 : Part 2 : 1994 Code of practice for painting concrete, masonry and plaster surfaces: Part 2 Schedule
    IS 2396 : 1988 Specification for Rubber Hose for Fuel Dispensing
    IS 2397 : 1988 Specification for Wafers
    IS 2398 : 1967 Identification Code for Rolling Bearings
    IS 2399 : 1988/ISO 5593 : 1984 Rolling bearings - Vocabulary
    IS 2400 : 1976 Specification for Besan
    IS 2401 : 1973 Code of practice for selection, installation and maintenance of domestic water meters
    IS 2402 : 1963 Code of Practice for External Rendered Finishes
    IS 2403 : 1991/ISO 606 : 1982 Short Pitch Transmission Precision Roller Chains and Chain Wheels
    IS 2404 : 1993 Malt Extract - Specification
    IS 2405 : Part 1 : 1980 Specification for industrial sieves: Part 1 Wire cloth sieves
    IS 2405 : Part II : 1980 Specification for Industrial Sieves - Part II : Perforated Plates
    IS 2407 : 1963 Photometric integrators
    IS 2408 : 1963 Method of static tests of timber in structural sizes
    IS 2409 : 1985 Specification for Calcium Ammonium Nitrate
    IS 2411 : 1963 Methods of chemical analysis of fluorspar (fluorite)
    IS 2412 : 1975 Link clips for electrical wiring
    IS 2413 : 1978 Specification for Cotton Twine
    IS 2414 : 1991 Cycle and rickshaw pneumatic tyres - Specification
    IS 2415 : 1992 Cycle rubber tubes - Specification
    IS 2416 : 1986 Boiler and supherheater tubes for marine and naval purposes
    IS 2417 : 1977 Glossary of terms relating to ultrasonic testing
    IS 2418 : Part I : 1977 Specification for Tubular Fluorescent Lamps for General Lighting Service - Part I : Requirements and Tests
    IS 2418 : Part II : 1977 Specification for Tubular Fluorescent Lamps for General Lighting Service - Part II : Standard Lamp Data IS 2418 : Part III : 1977 Specification for Tubular Fluorescent Lamps for General Lighting Service - Part III : Dimensions of G-5 IS 2418 : Part 4 : 1977 Tubular fluorescent lamps for general lighting service: Part 4 Go and no-go gauges for G-5and G-13 bi-IS 2419 : 1979 Dimensions for panel mounted indicating and recording electrical instruments
    IS 2422 : 1985 Specification for Dyed Cotton Fabric, Water Repellent, for Capes and Rain Coats
    IS 2425 : 1982 Test chart for pillar type vertical drilling machines
    IS 2426 : 1985 Test chart for bench drilling machines
    IS 2427 : 1968 Grading of Continuous Filament Viscose Rayon Yarn and Acetate Yarn, Bright And Dull
    IS 2428 : 1999 /ISO 513 : 1991 Application of Hard Cutting Materials for Machining by Chip Removal - Designation of the Main IS 2429 : Part 1 : 1987 Specification for Round Steel Short Link Chains (Electric Butt Welded), Grade L(3) Part 1 Non-Calibrated IS 2430 : 1986 Methods for Sampling of Aggregates for Concrete
    IS 2431 : 1963 Specification for Steel Wheelbarrows (Single-wheel Type)
    IS 2432 : 1993 Liquid sulphur dioxide - Specification
    IS 2438 : 1963 Specification for roller pan mixer
    IS 2439 : 1963 Specification for metal hand rollerls (fixed weight type)
    IS 2440 : 1975 Guide for Daylighting of Buildings
    IS 2441 : 1984 Code of practice for fixing ceiling covering
    IS 2442 : 1963 Specification for DC Moving Coil Galvanometers
    IS 2443 : 1994 Spices and Condiments - Coriander, Whole and Ground - Specification
    IS 2447 : 1993 Spices and Condiments - Cumin (SAFED JEERA), Whole - Specification
    IS 2448 : Part 1 : 1963 Adhesive insulating tapes for electrical purposes: Part 1 Tapes with cotton textile substrates
    IS 2449 : 1963 Silver oxide
    IS 2450 : 1963 Recommended practice for plating on aluminium and its alloys
    IS 2451 : 1994 Copper Alloys - Nickel Silver - Ingots and Castings - Specification
    IS 2452 : 1985 Specification for Hawser-Laid Cotton Rope
    IS 2453 : 1989 Cable-laid cotton rope - Specification
    IS 2454 : 1985 Methods for determination of colour fastness of textile materials to arificial light (xenon lamp)
    IS 2455 : 1990 Method of sampling of model trees and logs and their conversion for timber testing
    IS 2457 : 1979 Specification for Cotton Umbrella Cloth, Waterproofed
    IS 2458 : 2001/ISO 1122-1 : 1998 Vocabulary of Gear Terms - Definitions Related to Geometry
    IS 2458 : Part 2 : 1984 Glossary of terms for toothed gearing:Part 2 Bevel and hypoid gears
    IS 2459 : 1982 Specification for Horizontal Bars Used in Gymnastics
    IS 2460 : 1981 Specification for Pommelled Horse, Vaulting Horse and Vaulting Buck Used in Gymnastics
    IS 2461 : 1963 Specification for Balancing Beams Used in Gymnastics
    IS 2462 : 1981 Specification for Parallel Bars Used in Gymnastics
    IS 2463 : 1981 Specification for Rings Used in Gymnastics
    IS 2464 : 1963 Built-up mica for electrical purposes
    IS 2465 : 1984 Cables for motor vehicles
    IS 2466 : 1963 Specification for Beam Compasses
    IS 2467 : 1963 Notation for toothed gearing
    IS 2469 : 1976 Glossary of terms relating to gypsum
    IS 2470 : Part 1 : 1985 Code of practice for installation of septic tanks: Part I design, criteria and construction
    IS 2470 : Part 2 : 1985 Code of practice for installation of septic tanks: Part II Secondary treatment and disposal of septic tank IS 2471 : 1963 Methods of test for metal containers
    IS 2473 : 1975 Dimensions for centre holes
    IS 2474 : 1982 Metal closures for drums
    IS 2475 : 1979 Specification for Smoked Bacon
    IS 2476 : 1963 Specification for Ham
    IS 2478 : 1991 Glossary of terms relating to industrial radiography
    IS 2479 : 1981 Colour code for the identification of aluminium and aluminium alloys for general engineering purposes
    IS 2480 : Part 1 : 1983 Specification for General Purpose Glass Thermometers - Part I : Solid-Stem Thermometers
    IS 2480 : Part II : 1982 Specification for General Purpose Glass Thermometers - Part II : Enclosed-scale Thermometers
    IS 2482 : 1990 Light duty water suction hose of rubber (second revision)
    IS 2483 : 1986 Ticket board
    IS 2485 : 1979 Specification for Drop Forged Sockets for Wire Ropes for General Engineering Purposes
    IS 2486 : Part 1 : 1993 Metal fittings of insulators for overhead power lines with nominal voltage greater than 1000 V: Part 1 General IS 2486 : Part 2 : 1989 Insulator fittings for overhead power lines with nominal voltage greater than 1 000 V: Part 2 Dimensional IS 2486 : Part III : 1974 Specification for Insulator Fittings for Overhead Power Lines with a Nominal Voltage Greater than 1000 IS 2486 : Part IV : 1981 Specification for Insulator Fittings for Overhead Power Lines with a Nominal Voltage Greater than 1 000 IS 2487 : 1972 Specification for Flat Steel Healds (Excluding Jacquard Leno Weaving Healds)
    IS 2488 : Part II : 1968 Methods of Sampling and Test for Industrial Effluents, Part II
    IS 2488 : Part III : 1968 Methods of Sampling and Test for Industrial Effluents, - Part III
    IS 2488 : Part 5 : 1976 Methods of sampling and test for industrial effluents, Part V
    IS 2489 : 1963 Specification for Baby Weighing Machines
    IS 2491 : 1998 Food Hygiene - General Principles - Code of Practice
    IS 2492 : 1976 Specification for Stainless Steel Road Milk Tankers
    IS 2494 : Part 1 : 1994 V-Belts - Endless V-Belts for Industrial Purposes - Part 1 : General Purpose - Specification
    IS 2494 : Part 2 : 1993 V-belts - Endless V-belts for industrial purposes:Part 2 Fire resistant and antistatic V-belts - Specification
    IS 2495 : 1963 Specification for Cheese Hoops
    IS 2498 : 1963 Specification for Cheese Knife
    IS 2500 : Part 1 : 2000 Sampling Procedure for Inspection by Attributes - Part 1 : Sampling Schemes Indexed by Acceptance Quality IS 2500 : Part 2 : 1965 Sampling inspection procedures:Part 2 Inspection by variables for percent defective
    IS 2500 : Part 3 : 1995 /ISO 2859-2 : 1985 Sampling Inspection Procedures - Part 3 : Attribute Sampling Plans Indexed by Limiting IS 2501 : 1995 Solid Drawn Copper Tubes for General Engineering Purposes - Specification
    IS 2502 : 1963 Code of Practice for Bending and Fixing of Bars for Concrete Reinforcement
    IS 2504 : 1964 Specification for Hand-Operated Cheese Press (vertical)
    IS 2505 : 1992 Concrete vibrators - Immersion type - General requirements
    IS 2506 : 1985 General Requirements for Concrete Vibrators, Screed Board Type
    IS 2507 : 1975 Cold-rolled steel strips for springs
    IS 2508 : 1984 Specification for Low Density Polyethylene Films
    IS 2510 : 1976 Specification for Bottom Rollers for Drafting Systems
    IS 2511 : 1963 Specification for Polycrystalline Semi-conductor Rectifier Stacks
    IS 2512 : 1978 Miners cap lamp batteries (lead-acid type)
    IS 2514 : 1963 Specification for concrete vibrating tables
    IS 2515 : 1978 Test chart for guillotine shears
    IS 2518 : 1964 Code for seaworthy packaging of wool hosiery yarn and goods
    IS 2519 : 1983 Specification for Calcium Stearate for Cosmetic Industry
    IS 2520 : 1984 Specification for Zinc Stearate for Cosmetic Industry
    IS 2521 : 1984 Specification for Magnesium Stearate for Cosmetic Industry
    IS 2522 : 1984 Specification for Knitted Worsted Mufflers
    IS 2523 : 1982 Specification for Wool Hose Tops
    IS 2524 : Part 1 : 1968 Code of practice for painting of nonferrous metals in buildings: Part 1 Pretreatment
    IS 2524 : Part 2 : 1968 Code of practice for painting of non-ferrous metals in buildings: Part 2 Painting
    IS 2525 : 1982 Dimensions for wrought aluminium and aluminium alloys, wire
    IS 2526 : 1963 Code of practice for acoustical design of auditoriums and conferencne halls
    IS 2527 : 1984 Code of practice for fixing rainwater gutters and downpipes for drainage
    IS 2528 : 1984 Specification for Magnesium Carbonate Cosmetic Industry
    IS 2529 : 1983 Specification for Magnesium Oxide for Cosmetic Industry
    IS 2530 : 1963 Methods of test for polyethylene moulding materials and polyethylene compounds
    IS 2531 : 1979 Specification for Crank Shaft for Cotton Looms
    IS 2532 : 1965 Hard-drawn copper wire for telegraph and telephone purposes
    IS 2533 : 1978 Specification for Geometry Boxes
    IS 2534 : 1999 Carbide Tipped Dead Centres - Specification
    IS 2535 : 1978 Specification for Basic Rack and Modules of Cylindrical Gears for General Engineering and Heavy Engineering
    IS 2536 : 1995 Meat and Meat Products - Mutton and Goat Meat (Chevon) - Fresh, Chilled and Frozen - Technical Requirements
    IS 2537 : 1995 Meat and Meat Products - Beef and Buffalo Meat - Fresh, Chilled and Frozen - Technical Requirements
    IS 2538 : 1963 Test chart for bench grinders
    IS 2539 : 1963 Indian Standard Specification for Plane Tables
    IS 2540 : 1963 Dimensions for threaded centre holes
    IS 2541 : 1991 Code of practice for preparation and use of lime concrete
    IS 2542 : Part 1 : Sec 1 to 12 : 1978 Methods of Test for Gypsum Plaster, Concrete and Products - Part I : Plaster and Concrete
    IS 2542 : Part II : Sec 1 to 8 : 1981 Methods of Test for Gypsum Plaster, Concrete and Products - Part II : Gypsum Products
    IS 2543 : 1995 Cellulose Secondary Acetate materials for Moulding and Extrusion - Specification
    IS 2544 : 1973 Porcelain post insulators for systems with nominal voltage greater than 1000 V olts
    IS 2546 : 1974 Specification for galvanized mild steel fire bucket
    IS 2547 : Part 1 : 1976 Specification for gypsum building plaster: Part 1 Excluding premixed lightweight plaster
    IS 2547 : Part 2 : 1976 Specification for gypsum building plaster: Part 2 Premixed lightweight plaster
    IS 2548 : Part 1 : 1996 Specification for plastic seats and covers for water-closets: Part 1 Thermoset seats and covers
    IS 2548 : Part 2 : 1996 Specification for plastic seats and covers for water-closets: Part 2 Thermo plastic seats and covers
    IS 2549 : 1994 Code of classification of processed ferrous scrap
    IS 2550 : 1963 Glossary of classification terms
    IS 2551 : 1982 Danger notice plates
    IS 2552 : 1989 Steel drums (galvanized and ungalvanized)
    IS 2553 : Part 1 : 1990 Safety Glass - Specification - Part 1 : General Purpose
    IS 2553 : Part 2 : 1992 Safety Glass - Specification - Part 2 : For Road Transport
    IS 2554 : 1971 Specification for Cast Iron Angle Plates
    IS 2556 : Part 1 : 1994 Specification for vitreous sanitary appliances (vitreous china): Part 1 General requirements
    IS 2556 : Part 2 : 1994 Specification for vitreous sanitary appliances (vitreous china): Part 2 Specific requirements of wash-down IS 2556 : Part 3 : 1994 Vitreous Sanitary Appliances (Vitreous China) - Specification - Part 3 : Specific Requirements of Squatting IS 2556 : Part 4 : 1994 Specification for vitreous sanitary appliances (vitreous china): Part 4 Specific requirements of wash basins
    IS 2556 : Part 5 : 1994 Specification for vitreous sanitary appliances (vitreous china): Part 5 Specific requirements of laboratory
    IS 2556 : Part 6 : 1995 Vitreous Sanitary Appliances (Vitreous China) - Part 6 : Specific Requirements of Urinals and Partition Plates
    IS 2556 : Part 7 : 1995 Vitreous Sanitary Appliances (vitreous china) - Specification - Part 7 : Specific Requirements of Accessories IS 2556 : Part 8 : 1995 Vitreous Sanitary Appliances (vitreous china) - Specification - Part 8 : Specific Requirements of Pedestal IS 2556 : Part 9 : 1995 Specification for vitreous sanitary appliances (vitreous china): Part 9 Specific requirements of bidets
    IS 2556 : Part 14 : 1995 Specification for vitreous sanitary appliances (vitreous china): Part 14 Specific requirements of integrated IS 2556 : Part 15 : 1995 Vitreous Sanitary Appliances (vitreous china) - Specification - Part 15 : Specific Requirements of Universal IS 2556 : Part 16 : 2002 Vitreous Sanitary Appliances (Vitreous China) - Specification - Part 16 : Specific Requirements of Wash IS 2556 : Part 17 : 2001 Vitreous Sanitary Appliances (Vitreous China) - Specification - Part 17 : Specific Requirements of Wall IS 2557 : 1994 Annatto Colour for Food Products - Specification
    IS 2558 : 1994 Ponceau 4R, Food Grade - Specification
    IS 2559 : 1978 Specification for Garden Rake
    IS 2560 : 1979 Specification for Rubber-based Adhesives for Tubes, Non-curing
    IS 2561 : 1963 Specification for Rubber-based Adhesives for the Automobile Industry
    IS 2562 : 1979 Specification for Rubber-based Adhesives for Tyres and Tubes, Curing
    IS 2563 : 1978 Specification for Hedge Shears, Straight-edge Type
    IS 2565 : 1979 Specification for Ridger, Animal-drawn
    IS 2566 : 1993 Textiles - B-twill jute bags for packing foodgrains - Specification
    IS 2567 : 1978 Specification for Malathion Emulsifiable Concentrates
    IS 2568 : 1978 Specification for Malathion Dusting Powders
    IS 2569 : 1978 Specification for Malathion Water Dispersible Powder Concentrates
    IS 2570 : 1980 Specification for Methyl Parathion, Technical
    IS 2571 : 1970 Code of practice for laying in-situ cement concrete flooring
    IS 2572 : 1963 Code of practice for construction of hollow concrete block masonry
    IS 2573 : 1986 Specification for Leather Gauntlets and Mittens
    IS 2577 : 1974 Specification for Cartridge Fuse-links for Automobiles
    IS 2578 : 1978 Specification for Squash Racket Frames
    IS 2580 : 1995 Textiles- Jute sacking bags for packing cement - Specification
    IS 2581 : 2002 Round Strand Galvanized Steel Wire Ropes for Shipping Purposes - Specification
    IS 2582 : Part 1 : 1987/ISO 702/1 : 1975 Machine tools - Spindle noses and face plates - Sizes for interchangeability Part 1 Type IS 2582 : Part 2 : 1987/ISO 702/2 : 1975 Machine tools - Spindle noses and face plates - Sizes for interchangeability Part 2 Camlock IS 2582 : Part 3 : 1987/ISO 702/3 : 1975 Machine tools - Spindle noses and face plates - Sizes for interchangeability : Part 3 Bayonet IS 2584 : 1963 Method of test for electric strength of solid insulating materials at power frequencies
    IS 2585 : 1968 Specification for Black Square Bolts and Nuts (Diameter Range 6 to 39 mm) and Black Square Screws (Diameter IS 2586 : 1986 Specification for Bench Vices
    IS 2587 : 1975 Specification for Pipe Vices (Open Side Type and Fixed Sides Type)
    IS 2588 : 1975 Specification for Blacksmith's Vices
    IS 2589 : 1975 Hard drawn steel wire for upholstery springs
    IS 2590 : 1987 Primary aluminium ingots for remelting for general engineering purposes
    IS 2591 : 1982 Dimensions for Hot Rolled Steel Bars for Threaded components
    IS 2592 : 1980 Lamps for lighting on board ships
    IS 2593 : 1984 Specification for Flexible Cables for Miners' Cap-lamps
    IS 2594 : 2003 Hacksaw Blades - Specification
    IS 2595 : 1978 Code of Practice for Radiographic Testing
    IS 2596 : 1980 Bulbs (lamps)for miners cap lamps
    IS 2597 : Part 1 : 1964 Code of practice for the use of electron tubes: Part 1 Commercial receiving tubes
    IS 2597 : Part 2 : 1967 Code of practice for the use of electron tubes: Part 2 Special quality receiving tubes
    IS 2597 : Part 3 : 1969 Code of practice for the use of electron tubes: Part 3 Transmitting and industrial tubes
    IS 2597 : Part 4 : 1970 Code of practice for the use of electron tubes: Part 4 Cathode ray tubes
    IS 2597 : Part 5 : 1971 Code of practice for the use of electron tubes: Part 5 Rectifiers and thyratrons
    IS 2598 : 1966 Safety code for industrial radiographic practice
    IS 2599 : 1983 Methods for spectrographic analysis of high purity zinc and zinc base alloys for die casting
    IS 2600 : Part 1 : 1988 Methods of chemical analysis of zinc and zinc base alloys for die castings Part 1 Determination of copper,
    IS 2600 : Part 2 : 1988 Methods of chemical analysis of zinc and zinc base alloys for die castings Part 2 Determination of copper,IS 2600 : Part 3 : 1993 Methods of chemical analysis of zinc and zinc base alloys for die castings Part 3 Determination of Indium IS 2600 : Part 4 : 1993 Methods of chemical analysis of zinc and zinc base alloys for die castings Part 4 Determination of chromium IS 2601 : 1987 Brass anodes for electroplating
    IS 2602 : 1989 Cadmium anodes for electroplating
    IS 2603 : 1983 Copper anodes for electroplating
    IS 2604 : 1988 Specification for Lead Anodes for Electroplating
    IS 2605 : 1985 Zinc anodes for electroplating
    IS 2606 : 1987 Alloy lead anodes for chromium plating
    IS 2609 : 1972 Specification for Coach Bolts
    IS 2610 : 1989 Power transmission - Straight sided splines for machine tools - Dimensions
    IS 2611 : 1964 Carbon chromium molybdenum steel forgings for high temperature services
    IS 2613 : 1975 Specification for Cotton Drill (non-waterproofed) for Umbrellas
    IS 2615 : 1989 Pliers, pincers and nippers - Technical supply conditions
    IS 2616 : 1963 Specification for Brush, (i) Cleaning Tank, and (ii) Commode and Lavatory
    IS 2617 : 1967 Specification for Millboard, Greyboard and Strawboard
    IS 2618 : 1989 Glass test tube
    IS 2619 : 1993 Glass beakers
    IS 2620 : 1963 Distilling flasks
    IS 2621 : 1976 Specification for Brush, Commode Chutes
    IS 2622 : 1986 Specification for Brush, Banister (Hand Sweeping), Single
    IS 2626 : 1972 Petri dishes
    IS 2627 : 1979 Glossary of terms relating to liquid-in-glass thermometers
    IS 2628 : Part I : 1964 Specification for Rotary Wafer Switches (Low Current Rating) - Part I : Tests and General Requirements
    IS 2628 : Part 2 : 1967 Rotary wafer switches (Low current rating): Part 2 Rotary wafer switches with central mounting
    IS 2629 : 1985 Recommended Practice for Hot-Dip Galvanizing of Iron and Steel
    IS 2630 : 1992 Nitrobenzene - Specification
    IS 2631 : 1976 Specification for iso Propyl Alcohol
    IS 2632 : 1964 Specification for Crotonaldehyde
    IS 2633 : 1986 Methods for testing uniformity of coating of zinc coated articles
    IS 2635 : 1997 dc electric welding generators
    IS 2636 : 1972 Specification for Wing Nuts
    IS 2637 : 1991/ISO 487 : 1984 Steel roller chains Type S and C, Attachments and chain wheels
    IS 2638 : 1974 Specification for Flat Split Cotters
    IS 2639 : 1999 Papad - Specification
    IS 2641 : 1989 Electrical welding accessories
    IS 2643 : 1999 /ISO 228-1 : 1994 Type Threads Where Pressure-Tight Joints are not Made on the Threads - Dimensions, Tolerances IS 2644 : 1994 High tensile steel castings
    IS 2645 : 1975 Specification for Integral Cement Waterproofing Compounds
    IS 2646 : 1986 Specification for Generator (Dynamos) for Automobiles
    IS 2647 : 1964 Specification for Cheese Mill
    IS 2650 : 1975 Specification for Bombay Halwa
    IS 2652 : 1976 Schedule of terminals for leclanche type primary batteries
    IS 2653 : 1993 Safety Matches in Boxes - Specification
    IS 2661 : 1978 Specification for mobile library van
    IS 2662 : 1978 Specification for packages for use of libraries
    IS 2663 : 1989 Design of buildings for archives - Recommendations relating to its primary elements
    IS 2664 : 1980 Specification for quenching oil
    IS 2665 : 1964 Cadmium copper wire for telegraph and telephone purposes
    IS 2666 : 1963 Specification for Slide Rules (Linear Type)
    IS 2667 : 1988 Fittings for rigid steel conduits for electrical wiring
    IS 2668 : 1978 Specification for T-slot Milling Cutters
    IS 2669 : 1971 Specification for Woodruff Keyslot Milling Cutters with Parallel Shank
    IS 2670 : 1991 Thread Milling Cutter Shell Type - Specification
    IS 2671 : 1964 Specification for Interlocked Milling Cutters
    IS 2672 : 1966 Code of practice for library lighting
    IS 2673 : 2002 Dimensions for Wrought Aluminium and Aluminium Alloys Extruded Round Tube - Specificatioin
    IS 2674 : 1988 Specification for battened plywood cases
    IS 2675 : 1983 Enclosed distribution fuseboards and cutouts for voltages not exceeding 1000 V Ac and 1200 V Dc
    IS 2676 : 1981 Dimension for wrought aluminium and aluminium alloy sheet and strip
    IS 2677 : 1979 Dimensions for wrought aluminium and aluminium alloys, plates and hot rolled sheets
    IS 2678 : 1987 Dimensions and tolerances for wrought aluminium and aluminium alloy drawn round tube
    IS 2679 : 1964 Recommendations for equipment for electroplating
    IS 2681 : 1993 Specification for non-ferrous metal sliding door bolts (aldrops) for with padlocks
    IS 2683 : 1980 Guide for Installation of Impregnation Plants for Timber
    IS 2685 : 1971 Code of pracstice for selection, installation and maintenance of sluice valves
    IS 2686 : 1977 Specification for cinder as fine aggregates for use in lime concrete
    IS 2687 : 1991 Cap nuts - Specification
    IS 2688 : 1964 Specification for Insulated Stainless Steel Milk Storage Tank
    IS 2689 : 1964 Specification for Batch Pasteurizer (Stainless Steel)
    IS 2690 : Part 1 : 1993 Specification for burnt clay flat terracing tiles: Part 1 Machine made
    IS 2690 : Part 2 : 1992 Specification for burnt clay flat terracing tiles: Part 2 Hand made
    IS 2691 : 1988 Specification for burnt clay facing bricks
    IS 2692 : 1989 Specification for ferrules for water services
    IS 2693 : 1989 Power Transmission - Bush Type Flexible Coupling
    IS 2694 : 1963 School chalks, moulded, white
    IS 2695 : 1993 Specification for drawing filing equipment
    IS 2696 : 1974 Functional Requirements for 1 125-1/min Light Fire Engine
    IS 2697 : 1976 Ammonium bicarbonate for food industry
    IS 2699 : 1982 Specification for Flats and Flats' Screws
    IS 2700 : 1987 Code of practice for roofing with wooden shingles
    IS 2701 : 1986 Specification for Brush, Carriage Washing (Without Handle)
    IS 2702 : 1965 Method for Determination of Thermal Resistance of Textile Fabrics Guarded Hot-Plate Method
    IS 2704 : 1983 Brass wires for cold-headed and machined parts
    IS 2705 : Part 1 : 1992 Current transformers: Part 1 General requirements
    IS 2705 : Part 2 : 1992 Current transformers: Part 2 Measuring current transformers
    IS 2705 : Part 3 : 1992 Current transformers: Part 3 Protective current transformers
    IS 2705 : Part 4 : 1992 Current transformers: Part 4 Protective current transformers for special purpose applications
    IS 2707 : 1996 Carbon Steel Castings for Surface Hardening - Specification
    IS 2708 : 1993 1.5 Percent manganese steel castings for general engineerig purposes
    IS 2711 : 1979 Direct reading pH meters
    IS 2712 : 1998 Gaskets and Packings - Compressed Asbestos Fibre Jointing - Specification
    IS 2713 : Parts I to III : 1980 Specification for Tubular Steel Poles for Overhead Power Lines
    IS 2714 : 1991 Handloom pile fabric - Specification
    IS 2715 : 1991 Handloom Woollen Collar Cloth, White
    IS 2716 : 1972 Myrobalan extract
    IS 2717 : 1979 Glossary of terms relating to vitreous enamelware and ceramic-metal systems
    IS 2719 : 1964 Specification for Carrom Boards
    IS 2720 : Part 1 : 1983 Methods of Test for Soils - Part 1 : Preparation of Dry Soil Samples for Various Tests
    IS 2720 : Part 2 : 1973 Methods of test for soils: Part 2 Determination of water content
    IS 2720 : Part 3 : Sec 1 : 1980 Methods of test for soils: Part 3 Determination of specific gravity Section 1 fine grained soils
    IS 2720 : Part III : Sec 2 : 1980 Test for Soils - Part III : Determination of Specific Gravity - Section 2 : Fine, Medium and Coarse IS 2720 : Part 4 : 1985 Methods of Test for Soils - Part 4 : Grain Size Analysis
    IS 2720 : Part 5 : 1985 Method of Test for Soils - Part 5 : Determination of Liquid and Plastic Limit
    IS 2720 : Part 6 : 1972 Methods of test for soils: Part 6 Determination of shrinkage factors
    IS 2720 : Part VII : 1980 Methods of Test for Soils - Part VII : Determination of Water Content-Dry Density Relation Using Light IS 2720 : Part 8 : 1983 Methods of Test for Soils - Part 8 : Determination of Water Content-Dry Density Relation Using Heavy Compaction
    IS 2720 : Part 9 : 1992 Methods of test for soils: Part 9 Determination of dry density- moisture content relation by constant weight IS 2720 : Part 10 : 1991 Methods of test for soils: Part 10 Determination of unconfined compressive strength
    IS 2720 : Part 11 : 1993 Methods of test for soils: Part 11 Determination of the Shear Strength Parameters of a specimen tested IS 2720 : Part 12 : 1981 Methods of test for soils: Part 12 Determination of shear strength parameters of soil from consolidated IS 2720 : Part 13 : 1986 Methods of Test for Soils - Part 13 : Direct Shear Test
    IS 2720 : Part 14 : 1983 Methods of Test for Soils - Part 14 : Determination of Density Index (Relative Density) of Cohesionless IS 2720 : Part XV : 1965 Methods of Test for Soils - Part XV : Determination of Consolidation Properties
    IS 2720 : Part 16 : 1987 Methods of Test for Soil - Part 16 : Laboratory Determination of CBR
    IS 2720 : Part 17 : 1986 Methods of Test for Soils - Part 17 : Laboratory Determination of Permeability
    IS 2720 : Part 18 : 1992 Methods of test for Soils - Part 18 : Determination of Field Moisture Equivalent
    IS 2720 : Part 19 : 1992 Methods of Test for Soils - Part 19 : Determination of Centrifuge Moisture Equivalent
    IS 2720 : Part 20 : 1992 Methods of test for soils: Part 20 Determination of linear shrinkage
    IS 2720 : Part XXI : 1977 Methods of Test for Soils - Part XXI : Determination of Total Soluble Solids
    IS 2720 : Part 22 : 1972 Methods of test for soils: Part 22 Determination of organic matter
    IS 2720 : Part 23 : 1976 Methods of test for soils: Part 23 Determination of calcium carbonate
    IS 2720 : Part XXIV : 1976 Methods of Test for Soils - Part XXIV : Determination of Cation Exchange Capacity
    IS 2720 : Part 25 : 1982 Methods of test for soils: Part 25 Determination silica sesquioxide ratio
    IS 2720 : Part 26 : 1987 Method of Test for Soils - Part 26 : Determination of pH Value
    IS 2720 : Part 27 : 1977 Methods of test for soils: Part 27 Determination of total soluble sulphates
    IS 2720 : Part 28 : 1974 Methods of test for soils: Part 28 Determination of dry density of soils inplace, by the sand replacement IS 2720 : Part XXIX : 1975 Methods of Test for Soils - Part XXIX : Determination of Dry Density of Soils In-place by the Core-cutter IS 2720 : Part 30 : 1980 Methods of test for soils: Part 30 Laboratory vane shear test
    IS 2720 : Part 31 : 1990 Methods of Test for Soils - Part 31 : Field Determination of California Bearing Ratio
    IS 2720 : Part 33 : 1971 Methods of test for soils: Part 33 Determination of the density in place by the ring and water replacement IS 2720 : Part XXXIV : 1972 Methods of Test for Soils - Part XXXIV : Determination of Density of Soil In-place by Rubber-balloon IS 2720 : Part 35 : 1974 Methods of test for soils: Part 35 Measurement of negative pore water pressure
    IS 2720 : Part 36 : 1987 Methods of test for soils: Part 36 Laboratory determination of permeability of granular soils (constant head)
    IS 2720 : Part 37 : 1976 Methods of test for soils: Part 37 Determination of sand equivalent values of soils and fine aggregates
    IS 2720 : Part 38 : 1976 Methods of test for soils: Part 38 Compaction control test (hilf method)
    IS 2720 : Part XXXIX : Sec 1 : 1977 Methods of Test for Soils - Part XXXIX : Direct Shear Test for Soils Containing Gravel - Section IS 2720 : Part XXXIX : Sec 2 : 1979 Methods of Test for Soils - Part XXXIX : Direct Shear Test for Soils Containing Gravel - Section IS 2720 : Part XL : 1977 Methods of Test for Soils - Part XL : Determination of Free Swell Index of Soils
    IS 2720 : Part XLI : 1977 Methods of Test for Soils - Part XLI : Measurement of Swelling Pressure of Soils
    IS 2721 : 1979 Specification for Galvanized Steel Chain Link Fence Fabric
    IS 2722 : 1964 Specification for portable swing weigh batchers for concrete (single and double bucket type)
    IS 2723 : 1985 Ammonium bromide, pure and analytical reagent
    IS 2724 : 1964 Quality tolerances for water for pulp and paper industry
    IS 2725 : 1964 Quality tolerances for water for rayon-manufacturing industry
    IS 2726 : 1988 Code of practice for fire safety of industrial buildings: Cotton ginning and pressing (including cotton seed delintering)IS 2727 : 1964 Method for quantitative chemical analysis of binary mixtures of manila and sisal fibres
    IS 2728 : 1964 Memorandum on Screw Threads for Bicycle Components
    IS 2730 : 1977 Magnesium sulphate (epsom salt)
    IS 2732 : 1985 Code of Practice for Poultry Housing
    IS 2733 : 1985 Code of Practice for Sheep and Goats Housing
    IS 2734 : 1964 Code of Practice for Equine Housing
    IS 2740 : 1986 Specification for Sulphanilic Acid, Technical
    IS 2741 : 1989 - Naphthol - Specification
    IS 2742 : Part 1 : 1994 Automotive Vehicles - Brake Linings (Non-Rubberized) - Part 1 : Specification
    IS 2742 : Part 2 : 1999 Automotive Vehicles - Brake Linings - Rubberised - Part 2 : Specification
    IS 2742 : Part 3 : 1994 Automotive vehicles - Brake linings Part 3 Method of test
    IS 2742 : Part 4 : 1994 Automotive vehicles - Brake linings Part 4 Co-efficient of friction - Method of test
    IS 2742 : Part 5 : 1994 Automotive Vehicles - Brake Linings - Part 5 : Internal Shear Strength - Method of Test
    IS 2743 : 1992/ISO 1986 : 1985 Test chart for surface grinding machines with horizontal grinding wheel spindle and reciprocating IS 2744 : 1984 Specification for 1-Naphthylamine
    IS 2745 : 1983 Specification for Non-Metal Helmet for Firemen and Civil Defence Personnel
    IS 2746 : 1964 Specification for Spring Boards
    IS 2747 : 1990 Taximeters - Performance Requirements
    IS 2749 : 1974 Austenitic iron castings
    IS 2750 : 1964 Specification for Steel Scaffoldings
    IS 2751 : 1979 Code of Practice for Welding of Mild Steel Plain and Deformed Bars for Reinforced Concrete Construction
    IS 2752 : 1995 Activated carbons, granular
    IS 2753 : Part 1 : 1991 Methods for estimation of preservatives in treated timber and in solutions Part 1 Deterrmination of copper, IS 2753 : Part 2 : 1991 Methods for estimation of preservatives in treated timber and in treating solutions: Part 2 Determination IS 2754 : 1964 General requirements for optical instruments
    IS 2758 : 1969 Mild steel point hooks for use with wire rope thimbles
    IS 2759 : 1969 Higher tensile steel point hooks for use with wire rope thimbles
    IS 2760 : 1980 Specification for Steel Chain Slings
    IS 2762 : 1982 Specification for Wire Rope Slings and Sling Legs
    IS 2763 : 1999 Glossary of Terms Relating to Foundry Technology
    IS 2764 : 1980 Specification for Potassium Sulphate, Fertilizer Grade
    IS 2765 : 1982 Radiator hose
    IS 2766 : Part I : 1968 Methods of Chemical Analysis of Primary Nickel - Part I
    IS 2767 : 1984 Gold thread (silver base)
    IS 2768 : 1982 Copper alloy strip for bullet envelope
    IS 2769 : 1969 Sizes for squares and square holes for general engineering purposes
    IS 2770 : Part 1 : 1967 Methods of testing bond in reinforced concrete Part 1 Pull-out test
    IS 2771 : Part 1 : 1990 Corrugated Fibreboard Boxes - Specification - Part 1 : General Requirements
    IS 2771 : Part II : 1975 - Specification for Fibreboard Boxes - Part II : Solid Fibreboard Boxes
    IS 2772 : 1982 Non-flameproof mining transformers for use below ground
    IS 2779 : 1980 Specification for Potassium Chloride (Muriate of Potash), Fertilizer Grade
    IS 2780 : 1964 Sodium bromide, pure
    IS 2781 : 1975 Glossary of terms relating to ceramicware
    IS 2782 : 1964 Primary nickel
    IS 2783 : 1976 Specification for Balaclava Caps, Wool, Plain-knitted
    IS 2784 : 1971 Specification for Shuttle for Automatic Cop-Changing Jute Looms
    IS 2785 : 1979 Specification for Natural Cheese (Hard Variety), Processed Cheese, Processed Cheese Spread and Soft Cheese
    IS 2786 : Part I : 1978 Specification for Ceramic Dielectric Capacitors, Type 2 - Part I : General Requirements and Methods of IS 2786 : Part 2 : 1984 Specification for ceramic dielectric capacitors, type 2: Part 2 FCCG 01 and FCCG 02 capacitors
    IS 2787 : 1986 Specification for Multi-burner Oil Pressure
    IS 2788 : 1981 Specification for Gas Mantles
    IS 2789 : 1972 Special proofed paulins (tarpaulins) (first revision)
    IS 2790 : 1999 Guidelines for Manufacture of 23, 22, 21, 18, 14 and 9 Carat Gold Alloys
    IS 2791 : 1992 Soluble Coffee Powder - Specification
    IS 2792 : 1964 Code of practice for design and construction of stone slab over joist floor
    IS 2794 : 1979 Specification for Truing/Dressing Tools, Single Diamond
    IS 2796 : 2000 Motor Gasolines - Specification
    IS 2797 : 1998 Potassium bromide - Specification
    IS 2798 : 1998 Methods of test for plastics containers
    IS 2800 : Part 1 : 1991 Code of Practice for Construction and Testing of Tubewells/Borewells - Part 1 : Construction
    IS 2800 : Part II : 1979 Code of Practice Construction and Testing - Part II : Testing
    IS 2801 : 1967 Accuracy requirements for bulk meters used in petroleum trade
    IS 2802 : 1964 Specification for Ice-cream
    IS 2803 : 1964 Specification for Capillary Pipette for Direct Microscopic Count of Milk
    IS 2804 : 1998 Palm grips - Specification
    IS 2805 : 1964 Dimensions for ball grips
    IS 2806 : 1992 Guide to electrical resistance thermometry
    IS 2807 : 1981 Specification for Whipcords
    IS 2808 : 1964 Method for computation of capacity tables for pressurized storage tanks
    IS 2809 : 1972 Glossary of Terms and Symbols Relating to Soil Engineering
    IS 2810 : 1979 Glossary of terms relating to soil dynamics
    IS 2811 : 1987 Recommendations for Manual Tungsten Inert-gas Arc Welding of Austenitic Stainless Steel
    IS 2812 : 1993 Recommendations for manual tungsten inert gas arc welding of aluminium and aluminium alloys
    IS 2813 : 1995 Terminology for foodgrains
    IS 2817 : 1965 Methods for sampling of coated abrasives
    IS 2818 : Part 1 : 1990 Indian Hessian - Specification - Part 1 : General
    IS 2818 : Part II : 1971 Specification for Indian Hessian - Part II : 305 and 229 g/m at 16 Percent Contract Regain
    IS 2818 : Part III : 1971 Specification for Indian Hessian - Part III : 213 and 270 g/m at 16 Percent Contract Regain
    IS 2818 : Part IV : 1971 Specification for Indian Hessian - Part IV : 213 and 270 g/m at 14 Percent Contract Regain
    IS 2818 : Part V : 1974 Specification for Indian Hessian - Part V : 298 g/m at 16 Percent Contract Regain
    IS 2818 : Part VI : 1977 Specification for Indian Hessian - Part VI : 245 g/m at 16 Percent Contract Regain
    IS 2819 : 1983 Specification for Braided Cotton Cord
    IS 2823 : 1972 Specification for Twin Wire Healds for Jacquard Weaving
    IS 2824 : 1975 Method for determining the comparative tracking index of solid insulating materials under moist conditions
    IS 2825 : 1969 Code for unfired pressure vessels
    IS 2826 : 1986 Dimensions and tolerances for copper and copper alloy rods and bars for general engineering purposes
    IS 2827 : 1976 Methods for Calibration of Pressurized Storage Tanks
    IS 2828 : 2001 Plastics - Vocabulary
    IS 2829 : 1979 Specification for Steam-jacketed Ghee Pans (Stainless Steel)
    IS 2830 : 1992 Carbon steel cast billet ingots,billets,blooms and slabs for re-rolling into steel for general structural purposes (Superseding IS 2831 : 2001 Carbon Steel Cast Billet Ignots, Billets, Blooms and Slabs For Re-rolling into Low Tensile Structural Steel - Specification
    IS 2833 : 1973 Specification for Aniline, Technical
    IS 2835 : 1987 Flat transparent sheet glass
    IS 2836 : 1974 Methods of test and quality requirements for porcelain, laboratory apparatus
    IS 2837 : Part I : 1975 Specification for Porcelain Crucibles and Basins - Part I : Crucibles
    IS 2837 : Part II : 1977 Specification for Porcelain Crucibles and Basins - Part II : Basins
    IS 2838 : 1964 Stoneware containers for general purposes
    IS 2839 : 1964 Industrial stoneware
    IS 2840 : 2002 China Clay for Ceramic Industry - Specification
    IS 2843 : 1964 Recommendation on nominal capacities for process equipment
    IS 2844 : 1964 Recommendation on nominal diameter for process equipment
    IS 2847 : 1964 Specification for Cotton Selvedge Tape for Electric Cables
    IS 2848 : 1986 Specification for Industrial Platinum Resistance Thermometer Sensors
    IS 2849 : 1983 Specification for non-load bearing gypsum partition blocks (solid and hollow types)
    IS 2850 : 1983 Specification for Zinc Oxide for Cosmetic Industry
    IS 2851 : 1983 Specification for Titanium Dioxide for Cosmetic Industry
    IS 2852 : 1998 Carpenter's augers - Specification
    IS 2854 : 1990 Determination of young's modulus,tangent modulus and chord modulus - Test method
    IS 2855 : 1991 Thermostat metals - Determination of flexivity
    IS 2856 : 1999 Carbon Steel Castings for Pressure Containing Parts Suitable for Fusion Welding - Specification
    IS 2857 : 2002 Earthenware Crockeryware - Specification
    IS 2858 : 1984 Code of practice for roofing with mangalore tiles
    IS 2859 : 1977 Code of practice for treatment of water for locomotive boilers
    IS 2860 : 1964 Methods of sampling and test for processed fruits and vegetables
    IS 2861 : 1980 Specification for Diazinon Emulsifiable Concentrates
    IS 2862 : 1984 Specification for Diazinon Water Dispersible Powder Concentrates
    IS 2865 : 1978 Specification for Methyl Parathion Emulsifiable Concentrates
    IS 2867 : 1964 Specification for Canned Mangoes
    IS 2868 : 1964 Specification for Canned Pineapples
    IS 2869 : 1964 Specification for Canned Orange Segments
    IS 2871 : 1983 Specification for branch pipe, universal for fire fighting purposes
    IS 2873 : 1991 Textiles - Packaging of jute products in bales - Specification
    IS 2874 : 1993 Textiles - Heavy cee jute bags - Specification
    IS 2875 : 1993 Textiles - Jute corn bags - Specification
    IS 2876 : 1999 3-Jaw and 4-Jaw Scroll Manually Operated Self-Centering Lathe Chucks - Specification
    IS 2877 : 1986 Test chart for single and double column planing machines
    IS 2878 : 1986 Specification for Fire Extinguisher, Carbon Dioxide Type (Portable and Trolley Mounted)
    IS 2879 : 1998 Mild steel for metal arc welding electrodes
    IS 2881 : 1984 Barytes for chemical industry and oil-well drilling
    IS 2882 : 1964 Specification for Camel Hair Druggets for Export
    IS 2885 : 1975 Specification for Frozen Frog Legs
    IS 2886 : 1991 Labelling Paste for Paper Labels - Specification
    IS 2887 : 1993 Laundry Soap Powders/Flakes - Specification
    IS 2888 : 1983 Specification for Toilet Soap
    IS 2890 : 1983 Taper handles for machine tools
    IS 2891 : 1975 Specification for wooden handles for felling axes and hand axes
    IS 2892 : 1993 Wooden Handles for Picks and Beaters - Specification
    IS 2893 : 1992 Wooden Handles for Adzes - Specification
    IS 2894 : 1987 Specification for wooden handles for wood working chisels and gouges
    IS 2895 : 1990 Specification for wooden handles for engineers' file and engineers' scrapers
    IS 2896 : 1978 Specification for wooden handles for carpenters' augers
    IS 2897 : 1983 Specification for wooden handles for shovels
    IS 2898 : 1976 Specification for Steel Balls for Rolling Bearings
    IS 2904 : 1998 Ball handles - Specification
    IS 2905 : 1989 Methods of test for concrete poles for overhead power and telecommunication lines
    IS 2907 : 1998 Non-Ferrous Rivets - Specification
    IS 2908 : 1998 Hand cranks - Specification
    IS 2909 : 1998 Star grips - Specification
    IS 2910 : 1971 Specification for Shuttles for Jute Broad Looms
    IS 2911 : Part 1 : Sec 1 : 1979 Code of practice for design and construction of pile foundations: Part 1 Concrete piles, Section 1 IS 2911 : Part 1 : Sec 2 : 1979 Code of practice for design and construction of pile foundations: Part 1 Concrete piles, Section 2 IS 2911 : Part 1 : Sec 3 : 1979 Code of practice for design and construction of pile foundations: Part 1 Concrete piles, Section 3 IS 2911 : Part 1 : Sec 4 : 1984 Code of practice for design and construction of pile foundations: Part 1 concrete piles, Section 4 IS 2911 : Part 2 : 1980 Code of practice for desing and construction of pile foundations: Part 2 Timber piles
    IS 2911 : Part 3 : 1980 Code of practice for design and construction of pile foundations: Part 3 Under reamed piles
    IS 2911 : Part 4 : 1985 Code of practice for design and construction of pile foundations: Part 4 Load test on piles
    IS 2912 : 1964 Recommendation for Liquid Flow Measurement in Open Channels by Slope Area Method (Approximate Method)
    IS 2921 : 1988 Specification for Vernier Height Gauges
    IS 2922 : 1975 Specification for wooden tent mallets
    IS 2923 : 1995 Carmoisine, Food Grade - Specification
    IS 2925 : 1984 Specification for Industrial Safety Helmets
    IS 2926 : 1964 Dimensions of connectors for radio batteries
    IS 2927 : 1975 Specification for brazing alloys
    IS 2930 : 1980 Functional requirements for hose laying tender for fire brigade use
    IS 2932 : 1993 Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing - Specification
    IS 2933 : 1975 Specification for Enamel, Exterior, (a) Undercoating, (b) Finishing
    IS 2935 : 1980 Guide for use of quartz crystal units for frequency control and selection
    IS 2939 : 1991 Raw silk - Methods for visual and tactual examination
    IS 2940 : 1991 Raw silk - Determination of conditioned mass
    IS 2948 : 1991 Raw silk - Determination of cohesion
    IS 2949 : 1992 Engineering metrology - Plain V-blocks for inspection purposes - Specification
    IS 2950 : Part I : 1981 Code of Practice for Design and Construction of Raft Foundations - Part I : Design
    IS 2951 : Part I : 1965 Recommendation for Estimation of Flow of Liquids in Closed Conduits - Part I : Head Loss in Straight Pipes IS 2951 : Part 2 : 1965 Recommendation for estimation of flow of liquids in closed conduits Part 2 Head loss in valves and fittings
    IS 2952 : Part I : 1964 Recommendation for Methods of Measurement of Fluid Flow by Means of Orifice Plates and Nozzles - Part IS 2952 : Part 2 : 1975 Recommendations for methods of measurement of liquid flow by means of orifice plates and nozzles: Part IS 2953 : 1985 Glossary of terms used for interpretation of welds and castings radiographs
    IS 2954 : 1978 Specification for Vegetable Tanned Leather for Belting
    IS 2960 : 1964 Specification for Bookbinding Leather
    IS 2961 : 1973 Specification for Chrome Retan Finished Upper Leather
    IS 2962 : 1964 Methods of Sampling and Test for Kattha
    IS 2963 : 1979 Specification for copper alloy waste-fittings for wash basins and sinks
    IS 2964 : 1964 Methods for detection and estimation of damage in cotton fibres due to micro-organisms
    IS 2965 : 1987 Specification for Breaking Cord for Cotton Parachutes
    IS 2966 : 1964 Specification for Internal Micrometers (Including Stick Micrometers)
    IS 2967 : 1983 Specification for External Micrometer
    IS 2968 : 1964 Dimensions of Slide Rails Electric Motors
    IS 2969 : 1974 Method for Determination of Oil Content of Jute Yarn and Fabrics
    IS 2970 : 1987 Specification for Cotton Fabrics for Supply Dropping Parachutes
    IS 2972 : Part 1 : 1979 Textile motors: Part 1 Loom motors
    IS 2972 : Part 2 : 1979 Textile motors: Part 2 Card motors
    IS 2972 : Part 3 : 1979 Textile motors: Part 3 Spinning frame motors
    IS 2973 : 1983 Specification for Bicycle Steering Head Assembly (PH Type)
    IS 2974 : Part I : 1982 Code of Practice for Design and Construction of Machine Foundations - Part I : Foundation for Reciprocating IS 2974 : Part 2 : 1980 Code of practice for design and construction of machine foundations: Part 2 Foundations for impact type IS 2974 : Part 3 : 1992 Code of practice for design and construction of machine foundations: Part 3 Foundations for rotary type IS 2974 : Part 4 : 1979 Code of practice for design and construction of machine foundations: Part 4 Foundations for rotary type IS 2974 : Part 5 : 1987 Code of practice for design and construction of machine:foundations Part 5 Foundations for impact machines IS 2975 : 1998 Control levers with ball grip - Specification
    IS 2976 : 1964 Specification for Optical Theodolite
    IS 2977 : 1989 Fabrics (Other than Wool) - Method for Determination of Dimensional Changes on Soaking in Water
    IS 2978 : 1986 Specification for By-products of Lac
    IS 2979 : 1964 Specification for Fusel Oil
    IS 2980 : 1999 Non-Pressure Stoves - Specification
    IS 2981 : 1964 Layout Plan for Dairy Laboratories
    IS 2984 : 1981 Specification for Slip Gauges
    IS 2985 : 1990 Steel Castings for Ship's Structure - Specification
    IS 2986 : 1990 Steel castings for marine engines and boilers
    IS 2987 : 1992/ISO 447 : 1984 Direction of operation of controls for machine tools - Recommendations
    IS 2988 : 1995 Vernier theodlite - Specification
    IS 2989 : 1980 Specification for Keys for Lathe Chucks
    IS 2990 : 1986 Specification for Tenons
    IS 2991 : 1988 Specification for Base Paper for Waxed Paper
    IS 2992 : 1987 Insulation resistance testers, hand operated (magneto generator type)
    IS 2993 : 1998/IEC 252 : 1993 A.C. motor capacitors
    IS 2994 : 1992 Electric stoves
    IS 2995 : 1988 Specification for Set Collars
    IS 2996 : 1986 Mounting dimensions of plain grinding wheels by means of hub flanges
    IS 2997 : 1964 Air circulator type electric fans and regulators
    IS 2998 : 1982 Specification for Cold Forged Steel Rivets for Cold Closing (1 to 16 mm Diameter)
    IS 12998 : Part 1 : 1991 /ISO 1680-1 : 1986 Methods of Measurement of Airborne Noise Emitted by Rotating Electrical Machinery IS 3004 : 1979 Specification for plug cocks for water supply purposes
    IS 3005 : Part I : 1979 Specification for Grey Cast Iron Ingot Moulds, Stools and Slag Ladles - Part I : Bottom Stools for Large Size IS 3005 : Part II : 1979 Specification for Grey Cast Iron Ingot Moulds, Stools and Slag Ladles - Part II : Grey Cast Iron Ingot Moulds IS 3005 : Part III : 1982 Specification for Grey Cast Iron Ingot Moulds, Stools and Slag Laddles - Part III : Grey Cast Iron Ingot Moulds IS 3005 : Part 4 : 1984 Specification for Grey Cast Iron Ingot Moulds, Stools and Slag Laddles - Part 4 : Grey Cast Iron Ingot Moulds IS 3006 : 1979 Specification for chemically resistant glazed stoneware pipes and fittings
    IS 3007 : Part 1 : 1999 Laying of Asbestos Cement Sheets - Code of Practice - Part 1 : Corrugated Sheets
    IS 3007 : Part II : 1965 Code of Practice for Laying of Asbestos Cement Sheets - Part II : Semi-Corrugated Sheets
    IS 3008 : 2002 Brushes, Shoe Blacking - Specification
    IS 3009 : 2002 Brushes, Shoe Polishing - Specification
    IS 3010 : Part 1 : 1965 Appliance-connectors and appliance-inlets (non-reversible three-pin type): Part 1 Appliance connectors
    IS 3010 : Part 2 : 1965 Appliance-connectors and appliance-inlets(non-reversible three-pin type: Part 2 Appliance inlet
    IS 3011 : 1973 Ferrosilicozirconium
    IS 3012 : 1985 Chromemanganese
    IS 3013 : 1991 Ferroboron
    IS 3014 : 1993 Ferroniobium (Ferrocolumbium)
    IS 3015 : 1985 Specification for Brush, Scrubbing
    IS 3016 : 1982 Code of practice for fire precautions in welding and cutting operations
    IS 3017 : 1985 Thermostats for use with electric water heaters
    IS 3018 : 1977 Specification for Standard Silica Sand for Raw Material Testing in Foundries
    IS 3019 : 1973 Specification for High Speed Steel Butt-Welded Single Point Turning Tools
    IS 3020 : 1976 Specification for Leather for Oil Seals
    IS 3022 : 1983 Specification for Metal Reeds
    IS 3023 : 1965 Recommended practice for building up by metal spraying
    IS 3024 : 1997 Grain orinted electrical steel sheets and strips
    IS 3025 : 1964 Methods of Sampling and Test (Physical and Chemical) for Water Used in Industry
    IS 3025 : Part 1 : 1987 Methods of Sampling and Test (Physical and Chemical for Water and Wastewater - Part 1 : Sampling
    IS 3025 : Part 3 : 1987 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 3 : Precision and IS 3025 : Part 4 : 1983 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water - Part 4 : Colour
    IS 3025 : Part 5 : 1983 Methods of sampling and test (physical and chemical) for water and wastewater : Part 5 Odour
    IS 3025 : Part 6 : 1983 Methods of sampling and test (physical and chemical) for water and wastewater : Part 6 Odour threshold
    IS 3025 : Part 7 : 1984 Methods of sampling and test (physical and chemical) for water and wastewater : Part 7 Taste threshold
    IS 3025 : Part 8 : 1984 Methods of sampling and test (physical and chemical) for water and wastewater : Part 8 Taste rating
    IS 3025 : Part 9 : 1984 Methods of sampling and test (physical and chemical) for water and wastewater : Part 9 Temperature
    IS 3025 : Part 10 : 1984 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water - Part 10 : Turbidity
    IS 3025 : Part 11 : 1983 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 11 : pH Value
    IS 3025 : Part 12 : 1983 Methods of Sampling and Test (physical and chemical) for Water and Waste Water - Part 12 : Density
    IS 3025 : Part 14 : 1984 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water - Part 14 : Specific IS 3025 : Part 15 : 1984 Methods of Sampling and Test (physical and chemical) for Water and Waste Water - Part 15 : Total Residue IS 3025 : Part 16 : 1984 Methods of Sampling and Test (physical and chemical) for Water and Waste Water - Part 16 : Filterable IS 3025 : Part 17 : 1984 Methods of Sampling and Test (physical and chemical) for Water and Waste Water - Part 17 : Non-filterable IS 3025 : Part 18 : 1984 Methods of Sampling and Test (physical and chemical) for Water and Waste Water - Part 18 : Volatile IS 3025 : Part 19 : 1984 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water - Part 19 : Settleable IS 3025 : Part 20 : 1984 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water - Part 20 : Dispersion IS 3025 : Part 21 : 1983 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water - Part 21 : Total Hardness
    IS 3025 : Part 22 : 1986 Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water - Part 22 : Acidity
    IS 3025 : Part 23 : 1986 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 23 : Alkalinity
    IS 3025 : Part 24 : 1986 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 24 : Sulphates
    IS 3025 : Part 25 : 1986 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 25 : Chlorine
    IS 3025 : Part 26 : 1986 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 26 : Chlorine, IS 3025 : Part 27 : 1986 Methods of sampling and test (physical and chemical) for water and waste water - Part 27 : Cyanide
    IS 3025 : Part 28 : 1986 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 28 : Sulphites
    IS 3025 : Part 29 : 1986 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 29 : Sulphide
    IS 3025 : Part 30 : 1988 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 30 : Bromide
    IS 3025 : Part 31 : 1988 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 31 : Phosphorus
    IS 3025 : Part 32 : 1988 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 32 : Chloride
    IS 3025 : Part 33 : 1988 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 33 : Iodide
    IS 3025 : Part 34 : 1988 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 34 : Nitrogen
    IS 3025 : Part 35 : 1988 Methods of Sampling and Test ( Physical and Chemical) for Water and Wastewater - Part 35 : Silica
    IS 3025 : Part 36 : 1987 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 36 : Ozone, Residual
    IS 3025 : Part 37 : 1988 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 37 : Arsenic
    IS 3025 : Part 38 : 1989 Water and Wastewater - Methods of Sampling and Test (physical and chemical) - Part 38 : Dissolved Oxygen
    IS 3025 : Part 39 : 1991 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 39 : Oil and Grease
    IS 3025 : Part 40 : 1991 Water and Wastewater - Methods of Sampling and Test (physical and chemical) - Part 40 : Calcium
    IS 3025 : Part 41 : 1992 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 41 : Cadmium
    IS 3025 : Part 42 : 1992 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 42 : Copper
    IS 3025 : Part 43 : 1992 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 43 : Phenols
    IS 3025 : Part 44 : 1993 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 44 : Biochemical IS 3025 : Part 45 : 1993 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 45 : Sodium IS 3025 : Part 46 : 1994 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 46 : Magnesium
    IS 3025 : Part 47 : 1994 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 47 : Lead
    IS 3025 : Part 48 : 1994 Methods of Sampling and Test (physical and chemical) for Water and Wastewater - Part 48 : Mercury
    IS 3025 : Part 49 : 1994 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 49 : Zinc
    IS 3025 : Part 51 : 2001 Methods of Sampling and Tests (Physical and Chemical) for Water and Waste Water - Part 51 : Carbonate IS 3025 : Part 50 : 2001 Methods of Sampling and Tests (Physical and Chemical) for Water and Waste Water - Part 50 : Jar Test IS 3025 : Part 55 : 2003 Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater - Part 55 : Aluminium
    IS 3026 : 1991 Tin salts for electroplating
    IS 3028 : 1998 Automotive Vehicles - Noise Emitted by Moving Vehicles - Method of Measurement
    IS 3029 : 1964 Specification for Castorseed Cake for Fertilizer Purposes
    IS 3030 : 1965 Recommendation for letter symbols, signs and abbreviations used in chemical engineering
    IS 3031 : 1964 Specification for Leather Cash Bags
    IS 3032 : 1965 General requirements for testing the accuracy of commercial measuring instruments used in petroleum trade
    IS 3033 : 1965 Accuracy requirements for dispensing pump used in petroleum trade
    IS 3034 : 1993 Fire Safety of Industrial Buildings: Electrical Generating and Distributing Stations - Code of Practice
    IS 3036 : 1992 Code of practice for laying lime concrete for a waterproofed roof finish
    IS 3037 : 1986 Specification for bitumen mastic for use in water-proofing of roofs
    IS 3038 : 1992 Martensitic Stainless Steel and Alloy Steel Castings for Pressure Containing Parts Suitable for High Temperature IS 3039 : 1988 Structural steel for construction of hulls of ships
    IS 3040 : 1980 Specification for Indian Kapok
    IS 3041 : 1994 Minced Type Chewing Tobacco - Specification
    IS 3042 : 1965 Specification for single faced sluice gates (200 to 1200 mm size)
    IS 3043 : 1987 Code of practice for earthing
    IS 3044 : 1973 Specification for Mutton and Goat Meat, Curried and Canned
    IS 3047 : 1965 Accuracy requirements for volumetric container filling machines used in petroleum trade
    IS 3048 : 1965 Dimensions for handwheels
    IS 3050 : 1965 Code of practice for reinforced binding of library books and periodicals
    IS 3051 : 1988 Dimensions and tolerances for wrought copper and copper alloy plate
    IS 3052 : 1986 Dimensions and tolerances for wrought copper and copper alloy sheet, strip and foil for general engineering purposes
    IS 3053 : 1977 Specification for cane baskets for general purposes
    IS 3055 : Part 1 : 1994 Clinical thermometers Part 1: solid stem type - Specification
    IS 3055 : Part 2 : 2002 Clinical Thermometers - Part 2 : Enclosed-Scale Type - Specification
    IS 3056 : 1965 Specification for Lap Rods
    IS 3058 : 1990 Code of practice for fire safety of industrial buildings: Viscose rayon yarn and/or staple fibre plants
    IS 3059 : 2001 Transport of Monkeys by Rail, Road, Air and Sea - Code of Practice
    IS 3060 : 1979 Specification for Pork Sausages, Canned
    IS 3061 : 1979 Specification for Pork Sausages, Fresh
    IS 3062 : 1995 Crop Protection Equipment - Rocker Sprayer - Specification
    IS 3063 : 1994 Fasteners - Single coil rectangular section spring lock washers - Specification
    IS 3064 : 1986 Hand made drawing paper
    IS 3065 : 1985 Specification for cutting oil, neat
    IS 3066 : 1965 Specification for Hot Asphalt Mixing Plants
    IS 3067 : 1988 Code of practice for general design details and preparatory work for damp-proofing and water-proofing of buildings
    IS 3068 : 1986 Specification for broken brick (burnt clay) coarse aggregates for use in lime concrete
    IS 3069 : 1994 Glossary of terms, symbols and units relating to thermal insulation materials
    IS 3070 : Part 3 : 1993 Lightning Arresters for Alternating Current Systems - Specification - Part 3 : Metal Oxide Lightning Arresters IS 3071 : 1981 Specification for wooden crates
    IS 3073 : 1967 Assessment of Surface Roughness
    IS 3074 : 1979 Steel tubes for automotive purposes
    IS 3075 : Part 1 : 1986 Specification for circlips:Part 1 For shafts
    IS 3075 : Part 2 : 1986 Specification for Circlips - Part 2 : For Bores
    IS 3075 : Part 3 : 1986 Specification for circlips:Part 3 Type E for shafts
    IS 3076 : 1985 Specification for Low Density Polyethylene Pipes for Potable Water Supplies
    IS 3077 : 1992 Roasted and Ground Coffee - Specification
    IS 3078 : 1989 Rings for Spinning and Doubling Frames - Specification
    IS 3079 : 1990 Code of practice for fire safety of industrial buildings: Cotton textile mills
    IS 3080 : 1965 Test chart for universal tool and cutter grinders
    IS 3081 : 1994 Microscopes - General purposes - Dimensions and marking
    IS 3082 : 1988 Specification for Hexagon Socket Screw Keys
    IS 3083 : 1985 Code of practice for the processing of microtransparencies (microfilms and microfiche) (silver halide)
    IS 3084 : 1989 Specification for pencil slats
    IS 3085 : 1965 Method of Test for Permeability of Cement Mortar and Concrete
    IS 3086 : 1965 Code for seaworthy packaging of cotton hosiery yarn and goods
    IS 3087 : 1985 Specification for wood particle boards (medium density) for general purposes
    IS 3088 : 1967 Method for assaying of fine grade palladium
    IS 3090 : 1965 Code of practice for installation and maintenance of rolling bearings
    IS 3091 : 1999 Aluminium Bronze Ingots and Castings for Overhead Fittings in Electric Traction - Specification
    IS 3092 : 1982 Specification for Rubber Draining and Tapping Knife
    IS 3093 : 1981 Specification for Dah, Jungle Cutting
    IS 3094 : 1982 Specification for Bill-hook
    IS 3095 : 1999 Gold Solders for Use in Manufacture of Jewellery - Specification
    IS 3096 : 1965 Fine grade palladium
    IS 3097 : 1980 Specification for Veneered Particle Boards
    IS 3098 : 1983 Specification for oil, hydraulic, mineral oil type
    IS 3099 : Part 1 and Part 2 : 1992 Microscopes - Slips and slides - Specification: Part 1 Microscope slips; Part 2 Microscope slides
    IS 3100 : 1980 Specification for Men's Wool-cotton Short Drawers
    IS/ISO 3100-1 : 1991 Meat and Meat Products - Method of Sampling
    IS 3101 : 1995 Aluminium collapsible tubes
    IS 3103 : 1975 Code of Practice for Industrial Ventilation
    IS 3104 : Part I : 1982 Specification for Density Hydrometers - Part I : Requirements
    IS 3104 : Part II : 1982 Specification for Density Hydrometers - Part II : Methods of Test and Use
    IS 3105 : 1980 General requirements for automobile lighting and signalling devices
    IS 3107 : 1974 Portable multi purpose direct acting electrical indicating instruments
    IS 3108 : 1991 Forestry Tools - Pruning Saw - Specification
    IS 3109 : Part I : 1982 Specification for Short Link Chain, Grade M (4) - Part I : Non-calibrated Load Chain for Lifting Purposes
    IS 3109 : Part 2 : 1982 Short link chain, Grade M (4), Part 2 Calibrated load chain for pulley blocks and other lifting appliances
    IS 3110 : 1982 Specification for Silver Leaf
    IS 3111 : 1984 Silver thread
    IS 3112 : 1984 Gold and silver embroidery materials
    IS 3113 : 1965 Specification for Prismatic Binoculars for Common Use
    IS 3114 : 1994 Code of practice for laying of cast iron pipes
    IS 3115 : 1992 Specification for lime based blocks
    IS 3116 : 2002 Sealing Compound for Lead-acid Batteries (Bitumen Based) - Specification
    IS 3117 : 1965 Specification for bitumen emulsion for roads (anionic type)
    IS 3118 : 1978 Specification for Electric Bacteriological Incubators
    IS 3119 : 1978 Specification for Hot Air Sterilizers
    IS 3120 : 1999 Baby Incubators - Specification
    IS 3121 : 1981 Specification for Rigging Screws and Stretching Screws
    IS 3122 : 1982 Specification for Budding and Grafting Knife Combined
    IS 3123 : 1993 Hydroxycitronellal - Specification
    IS 3124 : 1992 Terpineol - Specification
    IS 3129 : 1985 Specification for low density particle boards
    IS 3130 : 1985 Code of practice for handling and storage of microtransparencies (microfilms and microfiche) (silver halide)
    IS 3131 : 1986 Specification for Musk Ambrette
    IS 3132 : 1965 Recommendations for Shaft Diameters for Chemical Equipment
    IS 3133 : 1989 Manhole and inspection openings for chemical equipment - General requirements
    IS 3134 : 1992 Menthol - Specification
    IS 3135 : 1965 Specification for Cathetometer
    IS 3136 : 1965 Polycrystalline semiconductor rectifier equipment
    IS 3137 : 1974 Specification for High-protein Mixes for Use as Food Supplements
    IS 3140 : 1965 Code of practice for painting asbestos cement building products
    IS 3141 : 1983 Specification for Starter Motors for Automotive Applications
    IS 3142 : 1993 Pulleys-V-Grooved Pulleys for Endless V-Belts Sections Z, A, B, C, D and E and Endless Wedge Belts Sections IS 3144 : 1992 Methods of test for mineral wool thermal insulation materials
    IS 3145 : 1986 Specification for musk xylol
    IS 3146 : 1991 Oil of Celery Seed - Specification
    IS 3147 : 1992 Oil of Dill Seed - Specification
    IS 3148 : 1991 Slide fasteners (general purpose)
    IS 3149 : 1994 Enamelware for home use
    IS 3150 : 1982 Specification for Hexagonal Wire Netting for General Purposes
    IS 3151 : 1982 Earthing transformers
    IS 3152 : 1980 Specification for Needle Files
    IS 3155 : 1965 Specification for MAKHANNA Products
    IS 3156 : Part 1 : 1992 Voltage transformers: Part 1 General requirements
    IS 3156 : Part 2 : 1992 Voltage transformers: Part 2 Measuring voltage transformers
    IS 3156 : Part 3 : 1992 Voltage transformers: Part 3 Protective voltage transformers
    IS 3156 : Part 4 : 1992 Voltage transformers: Part 4 Capacitor voltage transformers
    IS 3160 : 1965 Specification for Tur Chuni
    IS 3161 : 1965 Specification for Gram Chuni
    IS 3162 : 1965 Specification for Gram Husk
    IS 3163 : 1965 Specification for Rice Polish
    IS 3164 : 1980 Specification for Oil Pressure Lamps, Hanging Type
    IS 3165 : 1990 Textile Machinery - Beam, Weaver's, for Use in Plain Calico Loom - Specification
    IS 3166 : 1987 Reed spaces for plain calico looms
    IS 3167 : 1982 Cap copper alloy strip
    IS 3168 : 1981 Specification for Brass Strip and Foil for Deep Drawing
    IS 3169 : 1991 Internal Combustion Engines - Two Stage, One Litre, Diesel Fuel Filters
    IS 3170 : Part 1 : 1997 /ISO 2697 : 1974 Internal Combustion Engines - Fuel Injection Nozzles - Part 1 : Injection Nozzles - Size IS 3170 : Part 2 : 1997 /ISO 4010:1977 Internal Combustion Engines - Fuel Injection Nozzles - Part 2 : Calibrating Nozzle, Delay IS 3171 : Part 1 : 1997 /ISO 2699 : 1994 Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 1 : Flange Mounted IS 3171 : Part 2 : 1997 /ISO 7026 : 1990 Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 2 : Screw-in Injection IS 3171 : Part 3 : 1997 /ISO 7030 : 1987 Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 3 : Screw Mounted IS 3172 : 1997 Internal Combustion Engines - Fuel Injection Equipment - Single and Double Ended Pipe Unions (single and double IS 3173 : 1965 High pressure connections for fuel injection equipment for diesel engines
    IS 3174 : 1974 Specification for Pipe Union Bolt
    IS 3175 : 1974 Specification for Sealing Washers for Pipe Unions
    IS 3176 : 1983 Specification for Top Rollers for Ring and Speed Frames
    IS 3177 : 1999 Code of Practice for Electric Overhead Travelling Cranes and Gantry Cranes other than Steel Work Cranes
    IS 3178 : 1996 Abrasive Emery Grain - Specification
    IS 3179 : 1990 Engineering metrology - Feeler gauges
    IS 3180 : 1984 Specification for Linalyl Acetate
    IS 3181 : 1992 Conveyor belts - Fire resistant conveyor belting for underground mines and such other hazardous applications - IS 3182 : 1986 Specification for broken brick (burnt clay) fine aggregates for use in lime mortar
    IS 3184 : 1965 Specification for Kelim (Woollen Drugget) for Export
    IS 3186 : 1965 Methods of chemical analysis of cadmium copper
    IS 3187 : 1965 Methods of chemical analysis of copper-nickel zinc alloys
    IS 3188 : 1980 Characteristics of string insulator units
    IS 3189 : 1981 Specification for High-Speed Bobbins for Jute Industry
    IS 3190 : 1993 /ISO 92 : 1976 Textile Machinery and Accessories - Spinning Machinery - Definition of Side - (Left or Right)
    IS 3191 : 1968 Methods of sampling of cryolite and aluminium trifluoride
    IS 3192 : 1984 Specification for Cotton Calico for Electric Cables
    IS 3193 : 1984 Specification for Cotton Yarn for Braiding for Reinforcement and Electric Cables
    IS 3194 : 1980 Recommended practice for cleaning of metals prior to electroplating
    IS 3195 : 1992 Steel for the manufacture of volute and helical springs (for railway rolling stock)
    IS 3196 : Part 1 : 1992 Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity for Low Pressure Liquefiable Gases IS 3196 : Part 2 : 1992 Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity for Low Pressure Liquefiable Gases IS 3196 : Part 3 : 1991 Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases IS 3196 : Part 4 : 2001 Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity for Low Pressure Liquefiable Gases IS 3198 : 1965 Specification for Fodder Yeast
    IS 3199 : 1965 Definition of Side (Left or Right) of Weaving Preparatory Machines and Weaving Looms
    IS 3200 : 2001 Chemical Analysis of Cryolite
    IS 3201 : 1988 Criteria for design and construction of precast-trusses and purlins
    IS 3203 : 1982 Methods of testing local thickness of electroplated coatings_
    IS 3204 : 1978 Limestone for chemical industry
    IS 3205 : 1984 Precipitated barium carbonate, technical
    IS 3206 : 1989 Engineers' Drawing Instruments - Dividers - Specification
    IS 3207 : 1989 Engineers' Drawing Instruments - Rotating Compasses - Specification
    IS 3208 : 1989 Engineers Drawing Instruments - Half Set of Compasses - Specification
    IS 3209 : 1989 Engineers' Drawing Instruments - Spring Bow Compasses - Specification
    IS 3210 : 1989 Engineers' Drawing Instruments - Drawing Pens - Specification
    IS 3211 : 1991 Engineers' Drawing Instruments, Pen Points
    IS 3212 : 1991 Engineers' drawings instruments, lengthening bars - Specification
    IS 3213 : 1991 Engineers' drawing instruments, handles - Specification
    IS 3214 : 1991 Engineers' drawing instruments, pencil points - Specification
    IS 3215 : 1991 Engineers' drawing instruments, needle points - Specification
    IS 3216 : 1989 Engineers' drawing instruments, needles - Specification
    IS 3217 : 1991 Engineers' drawing instruments, prickers - Specification
    IS 3218 : 1968 Specification for Parallel Rulers, 150 mm (Link Type)
    IS 3219 : 1966 Specification for Engineers' Drawing Instruments, Boxes for Leads and Needles
    IS 3220 : 1966 Specification for Engineers' Drawing Instruments, Screw Drivers
    IS 3221 : 1966 Sets for Drawing Instruments
    IS 3222 : Part 1 : 1989 Instrument Screws - Specification - Part 1 : Fasteners for Drawing Instruments
    IS 3224 : 2002 Valve Fittings for Compressed Gas Cylinders Excluding Liquefied Petroleum Gas (LPG) Cylinders - Specification
    IS 3225 : 1965 Methods for Preparation of Buffer Solutions
    IS 3228 : 1986 Specification for Musk Ketone
    IS 3229 : 1973 Specification for Naphthionic Acid (Sodium Salt)
    IS 3231 : Part 0 : 1986 Electrical relays for power systems protection: Part 0 General introduction and list of parts
    IS 3231 : Part 1 : Sec 1 : 1986 - Specification for Electrical Relays for Power System Protection - Part 1 : General Requirements IS 3231 : Part 1 : Sec 2 : 1986 Electrical relays for power system protection: Part 1 General requirements, Section 2 Insulation IS 3231 : Part 1 : Sec 3 : 1986 Electrical realys for power system protection: Part 1 General requirements, Section 3 High frequency IS 3231 : Part 2 : Sec 1 : 1987 Specification for Electrical Relays for Power System Protection - Part 2 : Requirements for Principal IS 3231 : Part 2 : Sec 2 : 1987 Specification for Electrical Relays for Power System Protection - Part 2 : Requirements for Principal IS 3231 : Part 2 : Sec 3 : 1987 Electrical relays for power system protection: Part 2 Requirements for principal families, Section IS 3231 : Part 3 : Sec 1 : 1987 Specification for Electrical Relays for Power System Protection - Part 3 : Requirements for Particular IS 3231 : Part 3 : Sec 2 : 1987 Specification for Electrical Relays for Power System Protection - Part 3 : Requirements for Particular IS 3231 : Part 3 : Sec 3 : 1987 Specification for Electrical Relays for Power System Projection - Part 3 : Requirements for Particular IS 3231 : Part 3 : Sec 4 : 1987 Specification for Electrical Relays for Power System Protection - Part 3 : Requirements for Particular IS 3231 : Part 3 : Sec 5 : 1987 Electrical relays for power system Protection: Part 3 Requirements for particular group of relays, IS 3232 : 1999 Recommendations on Graphical Symbols for Process Flow Diagrams, Piping and Instrumentation Diagrams
    IS 3233 : 1965 Glossary of terms for safety and relief valves and their parts
    IS 3234 : Part 1 : 1986/ISO 594-1 : 1986 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical IS 3237 : Part 2 : 1985 Specification for Special Purpose Syringes - Part 2 : Tuberculin Syringes
    IS 3235 : 1988 /ISO 595-2 : 1987 General Requirements for Syringes for Medical Use
    IS 3236 : 1992 Hypodermic syringes for general purposes - Specification
    IS 3237 : Part 1 : 1985 Specification for Special Purpose Syringes - Part 1 : Insulin Syringes
    IS 3237 : Part 2 : 1985 Special purpose syringes Part 2 Tuberculin syringe
    IS 3237 : Part 3 : 1985 Specification for Special Purpose Syringes - Part 3 : BCG Syringes
    IS 3237 : Part 4 : 1986 Specification for Special Purpose Syringes - Part 4 : Vaccine Syringe
    IS 3237 : Part 5 : 1986 Specification for Special Purpose Syringes - Part 5 : Post Operation Care Syringe
    IS 3237 : Part 6 : 1986 Specification for Special Purpose Syringes - Part 6 : Irrigation Syringe
    IS 3237 : Part 7 : 1986 Specification for Special Purpose Syringe - Part 7 : Forced Feeding Syringe
    IS 3237 : Part 8 : 1986 Specification for Special Purpose Syringes - Part 8 : Angiography Syringe
    IS 3239 : 1994 Die Stock for Circular Screwing Dies - Specification
    IS 3241 : 1985 Specification for Geranyl Acetate
    IS 3242 : 1989 -Oxynaphthoic Acid (bon acid) - Specification
    IS 3244 : 1965 Specification for Cotton Webbing, Statichute
    IS 3245 : 1965 Specification for Canned Peas
    IS 3246 : 1976 Specification for Canned Okra (Bhindi)
    IS 3247 : 1976 Specification for Canned Bitter Gourd (KARELA)
    IS 3248 : 1993 Canned Tomatoes - Specification
    IS 3250 : 1993 Methyl Ionone - Specification
    IS 3251 : 1965 Specification for asphalt paver finishers
    IS 3251 : Part 2 : 1992 Asphalt paver finisher - General requirements Part 2 Hydraulic
    IS 3252 : 1987 Specification for Shroud-laid Cotton Line
    IS 3255 : 1979 Specification for Scoured or Dyed Cotton Tapes for Aerospace Purposes
    IS 3256 : 1980 Code for inland packaging of ropes and cordages
    IS 3259 : 1966 Methods of sampling of metal containers
    IS 3261 : 1980 Carbon steel forgings for shipbuilding industry
    IS 3262 : 1987 Specification for Pilot Lead Line
    IS 3263 : 1981 Specification for Waxed Paper for Confectionery
    IS 3264 : 1985 Specification for Diamond or Cubic Boron Nitride Abrasive Grinding Wheels
    IS 3265 : 1987 Specification for Weft Pirns (Taper Fit) for Use in Shuttles for Plain Calico Looms
    IS 3266 : 1982 Electroplated coatings of gold for general engineering purposes
    IS 3267 : 1981 General Requirements of anchors
    IS 3268 : 1981 Specification for Stockless Anchors (for Ships's Use)
    IS 3269 : 1981 Specification for Stock Anchor
    IS 3270 : 1966 Specification for Stock and Single Fluke Stock Anchors (For Harbour Use)
    IS 3271 : 1966 General requirements for steel cowl ventilators with detachable components
    IS 3272 : 1966 Dimensions for oval-head steel cowl ventilators
    IS 3273 : 1966 Dimensions for circular-head steel cowl ventilators
    IS 3274 : 1967 Goose-neck ventilators - welded type
    IS 3275 : 1966 Dimensions for steel cowl ventilators accessories
    IS 3276 : 1966 Dimensions for steel cowl ventilators - mechanical turning arrangements
    IS 3278 : 1966 Dimensions for detachable coaming covers and wire mesh grids for steel cowl ventilators
    IS 3279 : 1966 General requirements for mushroom ventilators
    IS 3280 : 1966 Dimensions for mushroom ventilators with adjustable head-welded type
    IS 3281 : 1966 Dimensions for mushroom ventilators with fixed head-welded type
    IS 3282 : 1966 Dimensions for mushroom ventilators with adjustable head-cast iron type
    IS 3283 : 1966 Dimensions for mushroom ventilators with adjustable head-cast iron type with provision for passage of light
    IS 3284 : 1984 Specification for Organo Mercurial Dry Seed-Dressing Formulations
    IS 3286 : 1980 Round grease tins
    IS 3287 : 1965 Industrial lighting fittings with plastic reflectors
    IS 3288 : Part 1 : 1986 Glossary of Terms Relating to Copper and Copper Alloys: Part 1 Materials
    IS 3288 : Part 2 : 1986 Glossary of Terms Relating to Copper and Copper Alloys: Part 2 Unwrought form and cast form
    IS 3288 : Part 3 : 1986 Glossary of Terms Relating to Copper and Copper Alloys: Part 3 Wrought forms
    IS 3288 : Part 4 : 1986 Glossary of Terms Relating to Copper and Copper Alloys: Part 4 Processing
    IS 3288 : Part 5 : 1986 Glossary of Terms Relating to Copper and Copper Alloys: Part 5 Heat treatment
    IS 3288 : Part 6 : 1986 Glossary of Terms Relating to Copper and Copper Alloys: Part 6 Finishes
    IS 3288 : Part 7 : 1986 Glossary of Terms Relating to Copper and Copper Alloys: Part 7 Dimensional surfaces and structural characterstics
    IS 3288 : Part 8 : 1986 Glossary of Terms Relating to Copper and Copper Alloys: Part 8 Packing
    IS 3290 : 1994 Household sewing machines - Thread take-up lever sub-assembly for cam type sewing machines - Specification
    IS 3291 : 1968 Specification for Thread Take Up Cams for Sewing Machines for Household Purposes
    IS 3295 : Part 1 : 1969 Method of chemical analysis of ferroboron Part 1 Analysis of carbon, silicon and aluminium
    IS 3295 : Part 2 : 1970 Method of chemical analysis of ferroboron Part 2 Determination of boron
    IS 3298 : 1981 Mild steel rivet bars for shipbuilding
    IS 3299 : 1969 Oscillating-rock shafts for sewing machines for household purposes
    IS 3300 : 1980 Dimensions for Mounted Wheels and Points
    IS 3302 : 1986 Specification for Backing Sheet for Stencil
    IS 3303 : 1997 Match paper for match box - Specification
    IS 3304 : 1965 Burnt magnesite-chrome refractories for general purposes
    IS 3305 : 1965 Burnt chrome-magnesite refractories for general purposes
    IS 3308 : 1981 Specification for wood wool building slabs
    IS 3309 : 1992 Soluble Coffee-chicory Powder - Specification
    IS 3311 : 1979 Specification for waste plug and its accessories for sinks and wash-basins
    IS 3312 : 1984 Specification for steel shelving cabinets (adjustable type)
    IS 3313 : 1983 Specification for Steel Filing Cabinets for General Office Purposes
    IS 3314 : 1984 Specification for steel clothes lockers
    IS 3315 : 1994 Evaporative Air Coolers (desert coolers) - Specification
    IS 3316 : 1974 Specification for structural granite
    IS 3317 : 1983 Specification for Hypodermic Needles
    IS 3318 : 1965 General requirements for surgical scalpels and knives
    IS 3319 : 1995 Blades, Surgical, Detachable (Bard Parker Type) and Handles - Specification
    IS 3320 : 1973 Specification for Surgical Scalpels
    IS 3321 : 1973 Specification for formaldehyde Solution
    IS 3322 : Part 1 : 1987 Water-resistant clothing Part 1 PVC-coated fabrics (first revision)
    IS 3323 : 1980 Bi-pin lampholders for tubular fluorescent lamps
    IS 3324 : 1982 Holders for starters for tubular fluorescent lamps
    IS 3325 : 1965 Code for inland packaging of cotton hosiery yarn and goods
    IS 3326 : 1978 Specification for Cotton Stockinette
    IS 3327 : 1982 Specification for Pedal-operated Paddy Threshers
    IS 3328 : 1993 Quality tolerances for water for swimming pools
    IS 3329 : 1973 Specification for Socks, Cotton
    IS 3330 : 1988 Specification for Wool-cotton Vests
    IS 3331 : 1977 Copper and brass strips/foils for radiator cores
    IS 3336 : 1965 Specification for Shark Liver Oil for Veterinary Use
    IS 3337 : 1978 Specification for ballies for general purposes
    IS 3339 : 1975 Silica flour for use in foundries
    IS 3340 : 1976 Specification for Harness (Dobby and Jacquard)
    IS 3342 : 1998 Soil working equipment - cultivators, Animal drawn - Specification
    IS 3343 : 1965 Natural moulding sand for use in foundries
    IS 3344 : 1965 Specification for D.W Tarpauling Jute Bags Packing (Mint) Coins
    IS 3345 : 1989 Sports Nets - Specification
    IS 3346 : 1980 Method of the determination of thermal conductivity of thermal insulation materials (two slab guarded hot plate method)
    IS 3347 : Part 1 : Sec 1 : 1979 Dimensions for porcelain transformer bushings for use in normal and lightly pol luted atmospheres: IS 3347 : Part 1 : Sec 2 : 1979 Dimensions for porcelain transformer bushings for use in nominal and lightly polluted atmospheres: IS 3347 : Part II : Sec 1 : 1979 Dimensions for Porcelain Transformer Bushings for Use in Normal and Lightly Polluted Atmospheres IS 3347 : Part II : Sec 2 : 1979 Dimensions for Porcelain Transformer Bushings for Use in Normal and Lightly Polluted Atmospheres IS 3347 : Part 3 : Sec 1 : 1988 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 3 17.5 IS 3347 : Part III : Sec 2 : 1982 Dimensions for Porcelain Transformer Bushings for Use in Normal and Lightly Polluted Atmospheres IS 3347 : Part 4 : Sec 1 : 1988 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 4 24 IS 3347 : Part 4 : Sec 2 : 1982 Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres: IS 3347 : Part 5 : Sec 1 : 1979 Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres: IS 3347 : Part 5 : Sec 2 : 1979 Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres: IS 3347 : Part 8 : Sec 1 : 1988 Dimensions for Porcelain Transformer Bushings for Use in Lightly Polluted Atmospheres - Part 8 IS 3347 : Part 8 : Sec 2 : 1992 Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 8 52 IS 3348 : 1965 Specification for fibre insulation boards
    IS 3349 : 1989 Perfumery Materials - Resinoid Benzoin, Pure - Specification
    IS 3351 : 1991 Diesel fuel filters - Methods of test
    IS 3352 : 1965 Varnished cotton cloth and tape for electrical purposes
    IS 3353 : 1966 Code for inland packaging of wool hosiery yarn and goods
    IS 3355 : 1974 Grey iron castings for elevated temperatures for non-pressure containing parts
    IS 3357 : 1991 Matka Silk Fabrics - Specification
    IS 3358 : 1991 Dupion Silk Fabrics - Specification
    IS 3359 : 1991 Silk Coating - Specification
    IS 3361 : 1979 Method for determination of colour fastness of textile materials to washing: Test 2
    IS 3362 : 1977 Code of practice for natural ventilaltion of residential buildings
    IS 3364 : Part 1 : 1976 Methods of measurement and evaluation of defects in timber: Part 1 Logs
    IS 3364 : Part 2 : 1976 Methods of measurement and evaluation of defects in timber: Part 2 Converted timber
    IS 3365 : 1965 Specification for floor polishing machines
    IS 3367 : 1993 Specification for burnt clay tiles for use in lining irrigation and drainage works
    IS 3368 : 1984 Specification for Wooden Heald Frames for Wire and Flat Steel Healds
    IS 3369 : 1965 Specification for Puddler, Animal Drawn
    IS 3370 : Part 1 : 1965 Code of practice for concrete structures for the storage of liquids: Part 1 General requirements
    IS 3370 : Part 2 : 1965 Code of practice for concrete structures for the storage of liquids: Part 2 Reinforced concrete structures
    IS 3370 : Part 3 : 1967 Code of practice for concrete structures for the storage of liquids: Part 3 Prestressed concrete structures
    IS 3370 : Part 4 : 1967 Code of practice for concrete structures for the storage of liquids: Part 4 Design tables
    IS 3372 : 1965 Specification for Bund Former
    IS 3374 : 1983 Specification for Preformed Steel Wire Ropes for Aircraft Controls
    IS 3375 : 1991 Household sewing machines - Bobbin case - Specification_
    IS 3381 : 1965 Specification for Cast Vertical Bollards with and Without Lugs
    IS 3382 : 1965 Specification for Stainless Steel Milk Pipes and Fittings
    IS 3383 : 1982 Specification for Wettable Sulphur Powder
    IS 3384 : 1986 Specification for bitumen primer for use in waterproofing and damp-proofing
    IS 3386 : 1979 Specification for Wooden Fence Posts
    IS 3387 : 1973 Specification for Toothbrush
    IS 3389 : 1994 Urea-formaldehyde Moulding Materials - Specification
    IS 3390 : 1988 Specification for Sphygmomanometers, Mercurial
    IS 3391 : 1965 Specification for Stethoscopes
    IS 3392 : 1965 Specification for Anaesthetic Airways
    IS 3393 : 1965 Specification for Mouth Props and Airways (London Hospital Pattern)
    IS 3394 : 1985 Method for Accelerated Life Test of Electrical Resistance Alloys for Heating Elements
    IS 3395 : 1997 Low Density Polyethylene (LDPE) and Liner Low Density Polyethylene (LLDPE) Materials for Moulding and Extrusions IS 3396 : 1979 Methods of test for volume and surface resistivities of solid electrical insulating materials
    IS 3397 : 1978 Specification for Community Radio Receivers
    IS 3398 : 1965 Specification for Oil of Patchouli
    IS 3399 : 1993 Zinc oxide for rubber industry (second revision)
    IS 3400 : Part 1 : 1987 Methods of test for vulcanized rubbers: Part 1 Tensile stress-strain properties (second revision)
    IS 3400 : Part 2 : 2003 Methods of Test for Vulcanized Rubber - Part 2 : Rubber, Vulcanized or Thermoplastic - Determination IS 3400 : Part 3 : 1987 Methods of test for vulcanized rubbers: Part 3 Abrasion resistance using a rotating cylindrical drum device IS 3400 : Part 4 : 1987 Methods of test for vulcanized rubbers: Part 4 Accelerated ageing (second revision)
    IS 3400 : Part 5 : 1986 Methods of test for vulcanized rubbers: Part 5 Adhesion of rubbers to textile fabrics (second revison)
    IS 3400 : Part 6 : 1983 Methods of test for vulcanized rubbers: Part 6 Resistance to liquids (first revision)
    IS 3400 : Part 7 : 1985 Methods of test for vulcanized rubbers: Part 7 Resistance to flex-cracking (first revision)
    IS 3400 : Part 8 : 1983 Methods of test for vulcanized rubbers: Part 8 Resistance to crack growth (first revision)
    IS 3400 : Part 9 : 2003 Methods of Test for Vulcanized Rubber - Part 9 : Rubber, Vulcanized - Determination of Density
    IS 3400 : Part X : 1977 Methods of Test for Vulcanized Rubbers - Part X : Compression Set at Constant Strain
    IS 3400 : Part 11 : 1985 Methods of test for vulcanized rubbers: Part 11 Determination of rebound resilience (first revision)
    IS 3400 : Part 12 : 1971 Methods of test for vulcanized rubbers: Part 012 Tear strength-crescent test piece
    IS 3400 : Part 13 : 1983 Methods of test for vulcanized rubbers: Part 13 Tension Set (first revision)
    IS 3400 : Part 14 : 1984 Methods of test for vulcanized rubbers: Part 14 Adhesion of rubber to metal (first revision)
    IS 3400 : Part 15 : 1971 Methods of test for vulcanized rubbers: Part 15 Volume resistivity of electrically conducting and antistatic IS 3400 : Part XVI : 1974 Methods of Test for Vulcanized Rubbers - Part XVI : Measurement of Cut Growth of Rubber by the Use IS 3400 : Part XVII : 1974 Methods of Test for Vulcanized Rubbers - Part XVII : Tear Strength - Angular Test Piece
    IS 3400 : Part 18 : 1995 Methods of Test for Vulcanized Rubbers - Part 18 : Stiffness at Low Temperature (Gehman Test)
    IS 3400 : Part 19 : 1976 Methods of test for vulcanized rubbers: Part 19 Permeability to gases (constant volume method)
    IS 3400 : Part 20 : 1994 /ISO 1431-1 : 1989 Methods of Test for Vulcanized Rubbers - Part 20 : Resistance to Ozone Cracking IS 3400 : Part XXI : 1980 Methods of Test for Vulcanized Rubbers - Part XXI : Determination of Permeability to Gases - Constant IS 3400 : Part 22 : 1984 Methods of test for vulcanized rubbers: Part 22 Chemical analysis
    IS 3400 : Part 23 : 2002/ISO 7619 : 1997 Methods of Test for Vulcanized Rubbers - Part 23 : Rubber - Determination of Indentation IS 3400 : Part 24 : 2001 Methods of Test for Vulcanized Rubbers - Part 24 : Rubber and Plastics Hose - Determination of Adhesion IS 3401 : 1992 Silica gel
    IS 3402 : 1965 Cadmium copper conductors for overhead railway traction
    IS 3403 : 1981 Dimensions for knurls
    IS 3404 : 1979 Ladies bicycle frames
    IS 3405 : 1966 Test chart for power hacksaw machines (up to 300 mm round bar capacity)
    IS 3406 : Part 1 : 1986 Dimensions for countersinks and counterbores Part 1 Countersinks
    IS 3406 : Part 2 : 1986 Dimensions for countersinks and counterbores Part 2 Counterbores
    IS 3407 : Part 1 : 1983 Method for Creep Testing of Steel at Elevated Temperatures - Part 1 : Tensile Creep Testing
    IS 3407 : Part 2 : 1983 Method for Creep Testing of Steel at Elevated Temperatures - Part 2 : Tensile Creep Stress Rupture Testing
    IS 3410 : 1993 Metallic materials - Determination of linear thermal expansion
    IS 3412 : 1994 Electric water boilers
    IS 3413 : 1977 Base paper for carbon paper
    IS 3414 : 1968 Code of Practice for Design and Installation of Joints in Buildings
    IS 3415 : 1998 Glossary of terms used in magnetic particle flaw detection
    IS 3416 : Part 1 : 1988 Method for Quantitative Chemical Analysis of Binary Mixtures of Polyester Fibre with Cotton or Regenerated IS 3416 : Part 2 : 1999 Method for Quantitative Chemical Analysis of Mixtures of Polyester Fibres With Cotton or Regenerated IS 3417 : 1979 Method for Determination of Colour Fastness of Textile Materials to Washing: Test 5
    IS 3419 : 1988 Fittings for rigid non-metallic conduits
    IS 3420 : 1976 Procedure for inspection and testing of aluminium alloy sheets and strips for aircraft purposes
    IS 3421 : 1988 Textiles - Binary mixtures of acrylic, certain modacrylics and certain other fibres - Methods for quantitative chemical IS 3423 : 1973 Specification for Glass Containers for Transfusion Fluids
    IS 3425 : 1986 Method for determination of colour fastness of textile materials to acid felting : Severe
    IS 3426 : 1982 Method for determination of colour fastness of textile materials to rubbing with organic solvents
    IS 3427 : 1997 /IEC 298 : 1990 A.C. Metal Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Up to and IS 3428 : 1980 Dimensions for relief grooves
    IS 3429 : 1966 Method for determination of solubility of wool in alkali
    IS 3430 : 1966 Method for determination of solubility of wool in urea-bisulphite solution
    IS 3431 : 1982 Steel for the manufacture of volute, helical and laminated springs for automotive suspension
    IS 3432 : 1965 Clay pipe triangles
    IS 3434 : 1984 Glossary of Terms for Adhesives and Pressure Sensitive Adhesive Tapes
    IS 3436 : 1978 Aluminium clad aluminium alloy sheet and strip for aircraft purposes (Alloy 24345)
    IS 3437 : 1972 General requirements for direct reading pointer indicator type electronic voltmeter
    IS 3438 : 1994 Silvered glass mirrors for general purposes - Specification
    IS 3440 : 1985 Specification for Solvent Extracted Linseed Oilcake (Meal) as Livestock Feed Ingredient
    IS 3441 : 1982 Specification for Solvent Extracted Groundnut Oilcake (Meal) as Livestock Feed Ingredient
    IS 3442 : 1980 Method for determination of crimp and count of yarn removed from fabrics
    IS 3443 : 1980 Crane rail sections
    IS 3444 : 1999 Corrosion Resistant High Alloy Steel And Nickel Base Castings for General Applications - Specification
    IS 3445 : 1992 Forged steel rolls
    IS 3447 : 1993 Shellac Jointing Compound - Specification
    IS 3448 : 1984 Specification for Rice Bran Oil
    IS 3449 : 1984 Specification for Cotton Webbing for Parachutes
    IS 3450 : 1994 Carbon papers, handwriting
    IS 3451 : Part I : 1978 Code of Practice for Care and Maintenance of Brushes - Part I : Pan Set Brushes
    IS 3451 : Part II : 1975 Code of Practice for Care and Maintenance of Brushes - Part II : Brushes Other Than Pan-Set Brushes
    IS 3452 : Part I : 1966 Specification for Toggle Switches - Part I : General Requirements and Tests
    IS 3452 : Part 2 : 1970 Specification for Toggle Switches - Part 2 : Toggle Switches, Type I and type II
    IS 3455 : 1971 Gauging practice for plain work pieces
    IS 3455 : Part 1 : 1985 Gauging Practice for Plain Workpieces - Part 1 : Inspection of Plain Workpieces with Indicating Measuring IS 3456 : 1966 Method for determination of water soluble matter of textile materials
    IS 3457 : 1987 Radii for Rounding for general engineering purposes
    IS 3458 : 2001 Conical Tapers and Taper Angles for General Engineering Purposes
    IS 3459 : 1977 Specification for Small Wire Ropes
    IS 3460 : 1991 Knurled nuts - Specification
    IS 3461 : 1980 Specification for PVC-asbestos floor tiles
    IS 3462 : 1986 Specification for unbacked flexible PVC flooring
    IS 3464 : 1986 Methods of Test for Plastic Flooring and Wall Tiles
    IS 3466 : 1988 Specification for masonry cement
    IS 3468 : 1991 Pipe nuts - Specification
    IS 3469 : Parts I to III : 1974 - Tolerances for Closed Die Steel Forgings
    IS 3470 : 2002 Hexane, Food Grade - Specification
    IS 3476 : 1986 Trolley and contact wire for electric traction
    IS 3477 : 1973 'GO' and 'NO GO' snap gauges for size range 3 to 250 mm
    IS 3478 : 1966 Specification for High Density Wood Particle Boards
    IS 3479 : 1966 General requirements for steel drop, upset and press forgings
    IS 3480 : 1966 Flexible steel conduits for electrical wiring
    IS 3481 : 1966 Electric portable lamp stands and brackets
    IS 3483 : 1965 Code of practice for noise reduction in industrial buildings
    IS 3485 : 1983 Specification for Plain and Master Setting Ring Gauges (Size Range from 1 up to and Including 315 mm)
    IS 3489 : 1985 Specification for enamelled steel bath tubs
    IS 3490 : 1965 Specification for Nigerseed Oil
    IS 3491 : 1965 Specification for Safflower oil
    IS 3492 : 1965 Specification for Karanja Oil
    IS 3493 : 1978 Methods of sampling and test for organic pigments for paints
    IS 3494 : 1978 Specification for Pruning Secateur
    IS 3495 : Part 1 to 4 : 1992 Methods of Tests of Burnt Clay Building Bricks - Part 1 : Determination of Compressive Strength - Part IS 3496 : 1966 Specification for Dobby Lags and Pegs
    IS 3497 : 1992 Specification for steel wardrobes (adjustable type)
    IS 3498 : 1993 Specification for metal table (office type)
    IS 3499 : Part 1 : 1985 Specification for metal chairs for office purposes: Part I non-revolving and non-tilting
    IS 3499 : Part 2 : 1985 Specification for metal chairs for office purposes: Part II Revolving and tilting
    IS 3500 : 1966 Specification for Mango Chutney
    IS 3501 : 1966 Specification for Pickles
    IS 3502 : 1994 Steel Chequered Plates - Specification
    IS 3504 : 1992 Thymol - Specification
    IS 3505 : 2002 Porcelain Crockeryware - Specification
    IS 3506 : 1989 Tables for Alcoholometry (Pyknometer Method)
    IS 3507 : 1966 Method of sampling and test for butter
    IS 3508 : 1966 Method of sampling and test for ghee
    IS 3509 : 1966 Method of sampling and test for cream
    IS 3510 : 1990 Engineering metrology - Toolmaker's flats - Specification
    IS 3512 : 1966 Specification for Toolmakers' Straightedges
    IS 3513 : Part 1 : 1989 Specification for resin treated compressed wood laminates (compregs) Part 1 For electrical purposes
    IS 3513 : Part 2 : 1989 Specification for resin treated compressed wood laminates (compregs):Part 2 For chemical purposes
    IS 3513 : Part 3 : 1989 Specification for Resin Treated Compressed Wood Laminates (Compregs) - Part 3 : For General Purposes
    IS 3513 : Part 4 : 1966 Specification for high and medium density wood lainates (compreg): Part 4 Sampling and tests
    IS 3515 : 1966 Specification for Tapes for Use in Measurement of Oil Quantities
    IS 3516 : 1966 Cast iron pipe flanges and flanged fittings for petroleum industry
    IS 3517 : 1979 Cotton linters
    IS 3518 : 1966 Chemical cotton for viscose and cellulose acetate
    IS 3519 : 1965 Methods of sampling and test for chemical cotton
    IS 3520 : 1992 Water-soluble sodium carboxymethyl cellulose
    IS 3521 : 1999 Industrial safety belts and harnesses - Speciification
    IS 3522 : Part 1 : 1989 Methods for estimation of common preservatives on textiles - Part 1
    IS 3522 : Part 2 : 1989 Textiles - Estimation of common preservatives - Part 2
    IS 3522 : Part 3 : 1983 Methods for estimation of common preservatives used in textiles industry - Part 3
    IS 3523 : 1974 Specification for Metal Travellers for Ring Spinning Frame
    IS 3524 : Part I : 1982 Specification for Threaded Taper Pins - Part I : With Internal Threads
    IS 3524 : Part II : 1982 Specification for Threaded Taper Pins - Part II : With External Threads
    IS 3525 : 1998 Metal arc welding for hull constructions of merchant ships in carbon and carbon -manganese steels
    IS 3526 : 1981 Specification for Barium Chromate for Paints
    IS 3527 : 1972 Specification for Mica for Paints
    IS 3528 : 1966 Waterproof electric lighting fittings
    IS 3529 : 1966 Specification for Eyelet Pliers
    IS 3530 : 1983 Specification for Gents' Rib - Knitted Cotton Stockings
    IS 3531 : 1997 Glossary of terms relating to corrosion of metals
    IS 3532 : 1987 Chemical cotton for nitrocellulose
    IS 3535 : 1986 Methods of sampling hydraulic cement
    IS 3536 : 1999 Ready Mixed Paint, Brushing, Wood Primer - Specification
    IS 3537 : 1966 Specification for Ready Mixed Paint, Finishing, Interior, for General Purposes, to Indian Standard Colours
    IS 3539 : 1966 Specification for Ready Mixed Paint, Undercoating, for Use Under Oil Finishes, to Indian Standard Colours, as Required
    IS 3542 : 1980 Specification for Extended Pitch Transmission Precision Roller Chains and Chain Wheel
    IS 3543 : 1966 Specification for Papain
    IS 3544 : 1966 General Requirements and Tests for Tag Strips
    IS 3545 : 1982 Specification for Meat Choppers
    IS 3546 : 1966 Specification for Vegetable Knives
    IS 3547 : 1976 Specification for Mango Nectar
    IS 3548 : 1988 Code of Practice for Glazing in Buildings
    IS 3549 : 1983 Specification for Water Suction and Discharge Hose of Rubber, Heavy Duty
    IS 3550 : 1965 Methods of test for routine control for water used in industry
    IS 3552 : 1989 Pliers - Flat Nose without Cutter, Long - Specification
    IS 3553 : 1966 Specification for Watertight Electric Lighting Fittings
    IS 3554 : 1966 Glossary of terms relating to electroplating
    IS 3555 : 1983 Specification for Cotton Singlets, White With Blue Welting
    IS 3558 : 1983 Code of practice for use of immersion vibrators for consolidating concrete
    IS 3559 : 1966 Specification for pneumatic concrete breakers
    IS 3560 : 1980 Specification for Short Pitch Transmission Precision Bush Chains and Chain Wheels
    IS 3561 : 1989 Silk Fabrics - Dimensional on Washing - Method Determination
    IS 3562 : 1997 p-Nitrotoluene, Technical - Specification
    IS 3563 : 1993 Automotive vehicles - Headlights (replaceable lamp type) - Specification
    IS 3564 : 1996 Hydraulically Regulated Door Closers - Specification
    IS 3565 : 1966 Specification for Rubber Teats for Feeding Bottles
    IS 3566 : 1966 Specification for Viscose Rayon Cut Staple (Spun) Yarn
    IS 3567 : 1966 Specification for Cotton Yarn for Covering Conductors
    IS 3568 : 1990 Round Nose Pliers - Specification
    IS 3569 : 1966 Specification for Burner Pliers
    IS 3571 : 1985 Dental gold solders
    IS 3573 : 1966 Specification for Sea Anchors for Lifeboats and Liferafts
    IS 3574 : Part 1 : 1965 Specification for Organic Pigments for Paints - Part I : AZO Pigments (Toluidine Red; Chlorinated p- Nitroaniline IS 3574 : Part 2 : 2000 Organic Pigments for Paints - Specification - Part 2 : Phthalocyanines
    IS 3575 : 1993 Bitumen drums
    IS 3576 : 1994 Spices and Condiments - Turmeric, Whole and Ground - Specification
    IS 3577 : 1992 Wrought aluminium and aluminium alloys rivet, bolt and screw stock - Dimensions and tolerances
    IS 3578 : 1985 Specification for Dental Gold Alloy Wire
    IS 3579 : 1966 Methods of test for oilseeds
    IS 3580 : 1966 General requirements for distress signals for lifeboats and liferafts
    IS 3581 : 1982 Green coffee
    IS 3582 : 1984 Specification for basket strainers for fire fighting purposes (cylindrical type)
    IS 3583 : 1988 Specification for burnt clay paving bricks
    IS 3584 : 1984 Specification for Camphor
    IS 3585 : 1966 Specification for Ready Mixed Paint, Aluminium, Brushing, Priming, Water Resistant, for Woodwork
    IS 3586 : 1966 Recommendations for lifeboat equipment
    IS 3587 : 1986 Specification for Rasps
    IS 3588 : 1987 Specification for Electric Axial Flow Fans
    IS 3589 : 2001 Steel Pipes for Water and Sewage (168.3 to 2 540 mm Outside Diameter) - Specification
    IS 3591 : 1985 Specification for Solvent-extracted Coconut Oilcake (Meal) as Livestock Feed Ingredient
    IS 3592 : 1985 Specification for Solvent Extracted Decorticated Cottonseed Oilcake (meal) as Livestock Feed Ingredient
    IS 3593 : 1979 Specification for Solvent-Extracted Rice Bran as Livestock Feed
    IS 3594 : 1991 Code of practice for fire safety of industrial buildings:General storage and warhousing including cold storage
    IS 3595 : 2002 Code of Practice for Fire Safety of Industrial Buildings : Coal Pulverizers and Associated Equipments
    IS 3596 : 1967 Glossary of terms relating to hosiery
    IS 3597 : 1998 Methods of test for concrete pipes
    IS 3598 : 1983 Sodium perborate, tetrahydrate
    IS 3599 : 1966 Methods of measurement of cooling medium temperature for electrical apparatus
    IS 3600 : Part 1 : 1985 Method of Testing Fusion Welded Joints and Weld Metal in Steel: Part 1 Cruciform fillet weld tensile test
    IS 3600 : Part 2 : 1985 Method of Testing Fusion Welded Joints and Weld Metal in Steel: Part 2 Beam impact (charpy V-notch) IS 3600 : Part 3 : 1984 Method of Testing Fusion Welded Joints and Weld Metal in Steel: Part 3 Transverse tensile test on butt IS 3600 : Part 4 : 1984 Method of Testing Fusion Welded Joints and Weld Metal in Steel: Part 4 Longitudinal tensile test on cylindrical IS 3600 : Part 5 : 1983/ISO 5173 : 1981 Method of Testing Fusion Welded Joints and Weld Metal in Steel: Part 5 Transverse root IS 3600 : Part 6 : 1983/ISO 5177 : 1981 Method of Testing Fusion Welded Joints and Weld Metal in Steel: Part 6 Transverse side IS 3600 : Part 7 : 1985 Method of Testing Fusion Welded Joints and Weld Metal in Steel: Part 7 Longitudinal root and face bend IS 3600 : Part 8 : 1985 Method of Testing Fusion Welded Joints and Weld Metal in Steel: Part 8 Nick break test and fillet weld fracture IS 3600 : Part 9 : 1985 Method of Testing Fusion Welded Joints and Weld Metal in Steel: Part 9 Macro and micro examination
    IS 3601 : 1984 Steel tubes for mechanical and general engineering purposes
    IS 3602 : 1966 Recommendations for the design of scales and indexes for indicating instruments for scales of 1 to 2 percent resolution
    IS 3603 : 1988 Seamless aluminium bottles
    IS 3604 : 1977 Specification for Jerseys, Round-Neck, Plain-Knitted, Worsted
    IS 3605 : 1984 Bauxite for chemicals and petroleum industries
    IS 3606 : 1998 Soil working equipment, Dischauow, Animal drawn - Specificaton
    IS 3607 : 1979 Magnesite for chemical industry
    IS 3608 : Part 1 : 1987 Specification for Glass Alcoholometers - Part 1 : Glass Alcoholometers without Thermometer
    IS 3608 : Part 2 : 1987 Specification for Glass Alcoholometers - Part 2 : Glass Alcoholometers with Thermometer (Thermo-alcoholometers)
    IS 3609 : 1966 Chrome molybdenum steel, seamless, boiler and superheater tubes
    IS 3610 : 1985 Dental gold foil
    IS 3611 : 2000 /ISO 1839 : 1980 Tea - Sampling
    IS 3612 : 1994 Crushing and grinding equipment - Classification and methods for measuring capacity
    IS 3613 : 1974 Acceptance tests for wire flux combination for submerged arc welding
    IS 3614 : Part I : 1966 Specification for Fire-check Doors - Part I : Plate, Metal Covered and Rolling Type
    IS 3614 : Part 2 : 1992 Specification for metallic and non-metallic fire check doors - Resistance test and performance criteria
    IS 3615 : 1967 Glossary of terms used in refrigeration and air conditioning
    IS 3617 : 1992 Textiles - Gent's pullover, knitted - Specification
    IS 3618 : 1966 Specification for Phosphate Treatment of Iron and Steel for Protection Against Corrosion
    IS 3620 : 1979 Specification for laterite stone block for masonry
    IS 3622 : 1977 Specification for sandstone (slabs and tiles)
    IS 3623 : 1978 Specification for Guide and Rubbing Ropes
    IS 3624 : 1987 Specification for Pressure and Vacuum Gauges
    IS 3625 : Part 1 : 1983 Specification for Warp Tubes for Ring Spinning and Doubling Spindles - Part : 1 General
    IS 3625 : Part 2 : 1984 Specification for Warp Tubes for Ring Spinning and Doubling Spindles - Part 2 : Recommended Dimensions IS 3625 : Part 3 : 1984 Specification for Warp Tubes for Ring Spinning and Doubling Spindles - Part 3 : Recommended Dimensions IS 3625 : Part 4 : 1986 Specification for Warp Tubes for Ring Spinning and Doubling Spindles - Part 4 : Recommended Dimensions IS 3626 : 2001 Locked Coil Winding Ropes - Specification
    IS 3627 : 1966 Specification for Cloth Rollers for Plain Cotton Looms
    IS 3628 : 1966 Sidelights, tail-lights, parking lights, stop lights and direction indicators for automobile use
    IS 3629 : 1986 Specification for structural timber in building
    IS 3630 : 1992 Construction of Non-load Bearing Gypsum Block Partitions - Code of Practice
    IS 3632 : 1969 Method of test for determination of wet volume of asbestos fibre
    IS 3633 : 1972 Specification for Tea
    IS 3635 : 1966 Methods of test for resistance of metallic electrical resistance material
    IS 3636 : 1966 Method of test for temperature co-efficient of precision resistor wires
    IS 3637 : 1966 Gas operated relays
    IS 3638 : 1966 Application guide for gas operated relays
    IS 3639 : 1966 Specification for Fittings and Accessories for Power Transformers
    IS 3640 : 1982 Specification for Hexagon Fit Bolts
    IS 3642 : Part 1 : 1990 Surgical instruments - Part 1: Non-cutting articulated instruments
    IS 3643 : 1992 Surgical instruments - Dissecting forceps (serrated and toothed) - Shapes and dimensions
    IS 3644 : 1992 Surgical instruments - Artery forceps Halsted's Mosquito pattern - Shape and dimensions
    IS 3645 : 1992 Surgical instruments - Artery forceps Spencer Wells pattern - Size, shape and dimensions
    IS 3646 : Part 1 : 1992 Code of practice for interior illumination: Part 1 General requirements and recomendations for welding interiors
    IS 3646 : Part II : 1966 Code of Practice for Interior Illumination - Part II : Schedule for Values of Illumination and Glare Index
    IS 3646 : Part 3 : 1968 Code of practice for interior illumination: Part 3 Calculation of coefficients of utilization by the BZ method
    IS 3648 : 1975 Specification for Rice Bran as Livestock Feed
    IS 3649 : 1966 Specification for Clutch Facing for Automotive Transmission
    IS 3650 : 1981 Specification for Combination Side Cutting Pliers
    IS 3651 : Part I : 1982 Specification for Vernier Calipers - Part I : Vernier Calipers with Least Count 0.1 mm and 0.05 mm
    IS 3651 : Part 2 : 1985 Specification for Vernier Callipers - Part 2 : Vernier Callipers with Least Count 0.02 mm
    IS 3651 : Part 3 : 1988 Specification for Vernier Callipers - Part 3 : Vernier Callipers with Least Count 0.1 mm (measuring range IS 3652 : 1995 Crop Protection Equipment - Foot Sprayer - Specification
    IS 3653 : 1966 Dimensions for forged end type rigid couplings
    IS 3654 : 1966 Dimensions for straight sided serrations
    IS 3655 : 1985 Recommended practice for electroplating
    IS 3656 : 1968 Code of recommended practice for mechanical polishing of metals for electroplating
    IS 3657 : 1978 Radiographic image quality indicators
    IS 3658 : 1999 Code of practice for liquid penetrant flaw detection
    IS 3659 : 1993 Table Tennis Balls - Specification
    IS 3660 : Part 1 : 1985 Methods of Test for Natural Rubber - Part 1 : Determination of Dirt
    IS 3660 : Part 2 : 1985 Methods of Test for Natural Rubber - Part 2 : Determination of Volatile Matter
    IS 3660 : Part 4 : 1988 Methods of Test for Natural Rubber - Part 4 : Determination of Total Copper
    IS 3660 : Part 5 : 1989 Methods of Test for Natural Rubber - Part 5 : Determination of Manganese
    IS 3660 : Part 6 : 1988 Methods of Test for Natural Rubber - Part 6 : Determination of Rubber Hydrocarbon
    IS 3660 : Part 7 : 1988 Methods of Test for Natural Rubber - Part 7 : Determination of Mooney Viscosity
    IS 3660 : Part 8 : 1999 Methods of Test for Natural Rubber - Part 8 : Mixing and Vulcanizing of Rubber in Standard Compound
    IS 3660 : Part 9 : 1989 Methods of Test for Natural Rubber - Part 9 : Determination of Solvent Extract
    IS 3660 : Part 10 : 2000 Methods of Test for Natural Rubber - Part 10 : Determination of Nitrogen Content [NR:11]
    IS 3660 : Part 11 : 1989 Methods of Test for Natural Rubber – Part 11 : Determination of Plasticity
    IS 3660 : Part 12 : 1989 Methods of Test for Natural Rubber – Part 12 : Determination of Plasticity Retention Index (PRI)
    IS 3660 : Part 13 : 1997 Methods of Test for Natural Rubber – Part 13 : Determination of Colour
    IS 3661 : 1966 Specification for Farm Milk Cooling Tanks
    IS 3663 : 1991 Dimensions of tables and chairs for general office purposes
    IS 3664 : 1981 Code of practice for ultrasonic pulse echo testings by contact and immersion methods
    IS 3665 : 1966 Dimensions for involute sided splines
    IS 3667 : 1993 Textiles – B-twill jute cloth – Specification
    IS 3669 : 1994 Melamine-Formaldehyde Moulding Materials – Specification
    IS 3670 : 1989 Code of practice for construction of timber floors
    IS 3671 : Part I : 1980 Specification for Air Dielectric Variable Tuning Capacitors – Part I : Tests and General Requirements
    IS 3673 : 1986 Specification for Alkali Resistant Paper
    IS 3674 : 1966 Method for determination of micronaire value of cotton fibres
    IS 3675 : 1966 Method for Determination of Bundle Strength (Tenacity) of Cotton Fibres
    IS 3677 : 1985 Specification for Unbonded Rock and Slag Wool for Thermal Insulation
    IS 3678 : 1966 Ready mixed paint, thick white, for lettering
    IS 3680 : 1987 Round printing ink containers
    IS 3681 : 1995 Gears – Cylindrical Gears – Accuracies
    IS 3682 : 1966 Flameproof ac motors for use in mines
    IS 3683 : 1987 Specification for Drop Wires for Warp Stop Motions
    IS 3685 : 1966 Methods of chemical analysis of brasses
    IS 3686 : 1966 Specification for Student-type Microscope
    IS 3687 : 1987 Specification for Pressure Sensitive Adhesive Cloth Tapes
    IS 3688 : 1990/ISO/R 775 : 1969 Power transmission – Shafts – Dimensions for cylindrical and 1/10 conical shaft ends
    IS 3689 : 1966 Conversion factors and conversion tables for yarn counts
    IS 3691 : 1990/ISO 7007 : 1983 Woodworking machines – Table bandsawing machines-Nomenclature and acceptance conditions
    IS 3692 : 1975 Specification for Rubber Closures, Pharmaceutical
    IS 3693 : 1966 Specification for Plastic Spectacle Frames
    IS 3694 : 1991/ISO 7987 : 1985 Test chart for woodworking turning lathes
    IS 3696 : Part 1 : 1987 Safety code of scaffolds and ladders: Part 1 Scaffolds
    IS 3696 : Part 2 : 1991 Scaffolds and Ladders – Code of Safety – Part 2 : Ladders
    IS 3700 : Part VII : 1970 Essential Ratings and Characteristics of Semiconductor Devices – Part VII : Reverse Blocking Triode Thyristors
    IS 3700 : Part 9 : 1972 Essential ratings and characteristics of semiconductor devices:Part 9 Variable capacitance diodes
    IS 3700 : Part 11 : 1984 Essential Ratings and Characteristics of Semiconductor Devices – Part 11 : Light Emitting Diodes
    IS 3701 : 1985 Specification for Rubber Protective Sheaths (condoms)
    IS 3702 : 1989 Refills for vacuum flasks
    IS 3703 : 1980 Code of practice for magnetic particle flaw detection
    IS 3704 : 1966 Methods for sampling of light metals and their alloy products
    IS 3705 : 1980 Specification for Ball Point Pens
    IS 3707 : 1984 Refill, ball point pen
    IS 3708 : Part 1 : 1985 Methods of Test for Natural Rubber Latex Part 1 Determination of Dry Rubber Content
    IS 3708 : Part 2 : 1985 Methods of Test for Natural Rubber Latex – Part 2 : Determination of Sludge Content
    IS 3708 : Part 3 : 1985 Methods of Test for Natural Rubber Latex – Part 3 : Determination of Density
    IS 3708 : Part 4 : 1985 Methods of Test for Natural Rubber Latex – Part : 4 Determination of Total Alkalinity
    IS 3708 : Part 5 : 1985 Methods of Test for Natural Rubber Latex – Part 5 : Determination of KOH-number
    IS 3708 : Part 6 : 1985 Methods of Test for Natural Rubber Latex – Part 6 : Determination of Mechanical Stability
    IS 3708 : Part 7 : 1986 Methods of Test for Natural Rubber Latex – Part 7 : Determination of Volatile Fatty Acid Number
    IS 3708 : Part 8 : 1986 Methods of Test for Natural Rubber Latex – Part 8 : Determination of Total Nitrogen
    IS 3708 : Part 9 : 1986 Methods of Test for Natural Rubber Latex – Part 9 : Determination of Total Ash
    IS 3708 : Part 10 : 1986 Methods of Test for Natural Rubber Latex – Part 10 : Determination of Boric Acid
    IS 3708 : Part 11 : 2001 Methods of Test for Natural Rubber Latex – Part 11 : Determination of Magnesium (Direct Titration Method) IS 3709 : 1966 Specification for Mastic Cement for Bedding of Metal Windows
    IS 3710 : 1978 Filling Ratios for Low Pressure Liquefiable Gases Contained in Cylinders
    IS 3711 : 1990 Wrought steel – Selection and preparation of samples and test pieces for mechanical tests
    IS 3715 : Part 4 : 1971 Letter symbols for semiconductor devices: Part 4 Thyristors
    IS 3716 : 1978 Application guide for insulation coordination
    IS 3717 : 1977 Refined secondary lead
    IS 3720 : 1983 /IEC 90 : 1973 Dimensions of Plugs for Hearing Aids
    IS 3721 : 1966 Specification for Cheese Cutting Knives for Table Use
    IS 3722 : Part 1 : 1983 Letter symbols and signs used in electrical technology: Part 1 General guidance on symbols and subscripts
    IS 3722 : Part 2 : 1983 Letter symbols and signs used in electrical technology: Part 2 Reference tables for symbols and subscripts
    IS 3723 : Part I : 1978 Specification for Capacitors for Radio Interference Suppression – Part I : General Requirements and Methods IS 3723 : Part 2 : 1983 Specification for Capacitors for Radio Interference Suppression – Part 2 : Type Fcrs 1
    IS 3723 : Part 3 : 1983 Specification for Capacitors for Radio Interference Suppression – Part 3 : Type FCRS 2
    IS 3724 : 1966 Cartridge type heating elements (non-embedded type)
    IS 3725 : 1966 Resistance wires, tapes and strips for heating elements
    IS 3726 : 1972 Specification for Thumb Screws
    IS 3727 : 1966 Specification for Wing Screws
    IS 3728 : 1985 Specification for wooden boxes for packaging of apples
    IS 3730 : 1988 Specification for High Density Polyethylene Bucket
    IS 3731 : 1985 Specification for teak squares
    IS 3732 : 1966 Specification for Rigid Liferafts
    IS 3733 : 2000 Shipbuilding – Conventional Signs to be Used in Schemes for the Installations of Ventilation Systems – Recommendations
    IS 3734 : 1983 Dimensions for worm gearing
    IS 3735 : 1996 Canvas shoes, rubber sole – Specification
    IS 3736 : 1995 Canvas boots, rubber sole – Specification
    IS 3738 : 1998 Rubber boots – Specification
    IS 3739 : 1987 Dimensional tolerances for carbon and alloy constructional steel products
    IS 3740 : 1966 Specification for Tubes, Glass, for Pathological Work
    IS 3741 : Part 1 : 1990 Medical Instruments – Sedimentation Tubes – Specification – Part 1 : Westergren Tube
    IS 3741 : Part 2 : 1990 Medical Glass Instruments – Sedimentation Tubes – Specification – Part 2 : Wintrobe Tube
    IS 3742 : 1990 Medical Glass Instruments – Pipettes, dilution for haemocytometers
    IS 3743 : 1966 Specification for Hair Clippers (Hand-Operated)
    IS 3744 : 1985 Specification for hose binding machine
    IS 3745 : 1978 Specification for Yoke Type Valve Connection for Small Madical Gas Cylinders
    IS 3746 : 1966 Graphical Symbols for Coal Preparation Plant
    IS 3748 : 1990 Tool and Die Steels – Specification (Superseding IS 3749)
    IS 3750 : 1993 Textiles – Jute Corn Sack Cloth – Specification
    IS 3751 : 1993 Textiles – Heavy cee jute cloth – Specification
    IS 3752 : 1988 Methods of test for alcoholic drinks
    IS 3753 : 1984 Methods of sampling for alcoholic drinks
    IS 3755 : 1966 Specification for Emery Fillets
    IS 3756 : 2002 Method for Gear Correction – Addendum Modification for External Cylindrical Gears with Parallel Axes
    IS 3757 : 1985 Specification for High Strength Structural Bolts
    IS 3758 : 1966 Specification for Hooks, Aural
    IS 3759 : 1987 Specification for Blades, Skin Grafting
    IS 3760 : 1966 Specification for Probe, Aural, Jobson Horne’s Pattern
    IS 3761 : 1983 Specification for Metal Side Racks (Adjustable Type)
    IS 3762 : 1979 Specification for metal waste paper bins
    IS 3763 : 1983 Specification for metal folding chairs
    IS 3764 : 1992 Code of safety for excavation work
    IS 3766 : 1977 Method for calibration of pandulum impact testing machines for testing metals
    IS 3767 : 1966 Specification for Hook, Skin, Gillies Pattern
    IS 3768 : 1996 Ventilation Ducting – Vinyl Coated, Flexible and Semi-Rigid – Specification
    IS 3769 : 1993 Textiles – Pugree cloth, cotton khadi,bleached or dyed – Specification
    IS 3770 : 1994 Textiles – Dosuti,cotton khadi,bleaches or dyed – Specification
    IS 3771 : 1993 Textiles – Long cloth,cotton khadi,bleached -Specification
    IS 3772 : 1994 Textiles – Mazri,cotton khadi,scoured – Specification
    IS 3773 : 1994 Textiles – Napkins and table cloth,cotton khadi,bleached – Specification (Superseding IS 3774:1966)
    IS 3776 : 1994 Textiles – Bed sheets,cotton khadi,bleached – Specification
    IS 3777 : 1994 Textiles – Dusters,cotton khadi,bleached – Specification
    IS 3778 : 1993 Textiles – Dungri cloth,cotton khadi,bleached – Specification
    IS 3779 : 1994 Textiles – Sheeting cloth,cotton khadi,bleached – Specification
    IS 3780 : 1994 Textiles – Lining Cloth, Cotton Khadi, Dyed – Specification
    IS 3781 : 1994 Textiles – Honey comb and huckaback towels,cotton khadi,bleached or dyed – Specition (Amalgamating IS 3775:IS 3782 : 1994 Textiles- Sponge cloth,cotton khadi,grey – Specification
    IS 3784 : 1994 Textiles – Cloth,cotton khadi,bleached,for general purposes _ Specification
    IS 3785 : 1983 Specification for Wicket Keeping Gloves
    IS 3786 : 1983 Methods for computation of frequency and severity rates for industrial injuries and classification of industrial accidents
    IS 3787 : 1966 Specification for Gag, Mouth, Cleft Palate
    IS 3788 : 1966 Specification for Specula, Aural
    IS 3789 : 1966 Specification for Bare Cloth Take-up Rollers for Plain Cotton Looms
    IS 3790 : 1991 Textiles – Hessian bags – Specification
    IS 3791 : 1983 Specification for Metal Paper Trays
    IS 3792 : 1978 Guide for heat insulation of non industrial buildings
    IS 3793 : 1966 Specification for Live Centres
    IS 3795 : 1993 Spices and Condiments – Fenugreek, Whole and Ground – Specification
    IS 3796 : 1993 Spices and Condiments – Fennel Seeds, Whole – Specification
    IS 3797 : 1993 Spices and Condiments – Celery Seeds – Specification
    IS 3798 : 1966 Glossary of terms used in the bicycle industry
    IS 3799 : 1966 Specification for Forceps, Aural and Nasal, Crocodile Action
    IS 3800 : 1983 Specification for Batting Gloves
    IS 3802 : 1992 Roasted Coffee-Chicory Powder – Specification
    IS 3803 : Part 1 : 1989/ISO 2566-1 : 1984 Steel – Conversion of Elongation Values: Part I Carbon & loow alloy steels
    IS 3803 : Part 2 : 1989/ISO 2566-2 : 1984 Steel – Conversion of Elongation Values: Part 2 Austenitic steels
    IS 3805 : 1979 Specification for pent-top wooden cases
    IS 3806 : 1966 Specification for wooden beaters
    IS 3807 : 2000 ENT Surgery Instruments – Forceps, Dressing, Aural and Nasal – Specification
    IS 3808 : 1979 Method of test for non-combustibility of building materials
    IS 3809 : 1979 Fire resistance test for structures
    IS 3810 : Part 1 : 2002 Solid Mineral Fuels – Vocabulary – Part 1 : Terms Relating to Coal Preparation
    IS 3810 : Part 2 : 2003 Solid Mineral Fuels – Vocabulary – Part 2 : Terms Relating to Sampling, Testing and Analysis
    IS 3810 : Part 3 : 1977 Glossary of terms relating to solid mineral fuels; Part III Terms relating to coke
    IS 3811 : 1988 Alcoholic Drinks – Rum – Specification
    IS 3812 : 1981 Specification for fly ash for use as pozzolana and admixture
    IS 3813 : 1367 Specification for ‘C’ Hooks for Use With Swivels
    IS 3815 : 1969 Specification for Point Hooks with Shank for General Engineering Purposes
    IS 3816 : 1966 Specification for Connecting Rods for Sewing Machines for Household Purposes
    IS 3817 : 1991 Household sewing machines – Arm shaft – Specification
    IS 3818 : 1992 Specification for continuous (Piano) hinges
    IS 3820 : 1982 Specification for Carbide Tipped Coal Cutting Tools
    IS 3821 : 1973 Methods for determination of weight of coating on hot-dip aluminized iron and steel articles
    IS 3822 : 2002 Eye Hooks for Use with Chains – Specification
    IS 3823 : 1988/ISO 76 : 1987 Rolling bearings – Static load ratings
    IS 3824 : 2002 /ISO 281 : 1990 Rolling Bearings – Dynamic Load Ratings and Rating Life
    IS 3824 : Part 1 : 1983 Methods of evaluating dynamic load ratings of rolling bearings Part 1 Radial ball bearings
    IS 3824 : Part 2 : 1983 Methods of evaluating dynamic load ratings of rolling bearings Part 2 Radial roller bearings
    IS 3824 : Part 3 : 1983 Methods of evaluating dynamic load ratings of rolling bearings Part 3 Thrust ball bearings
    IS 3824 : Part 4 : 1983 Methods of evaluating dynamic load ratings of rolling bearings Part 4 Thrust roller bearings
    IS 3825 : 1990 Inset Mail Wire Healds for Jute Weaving – Specification
    IS 3826 : Part 2 : 1970 Specification for Connectors for Frequencies below 3 Mhz – Part 2 : Battery Connectors for Electronic Equipment
    IS 3827 : 1966 Specification for Riboflavin, Food Grade
    IS 3828 : 1966 Specification for ventilator chains
    IS 3829 : Part 1 : 1999 Specification for Horizontal Cylindrical and Horizontal Rectangular Steam Sterilizers, Pressure Type (for IS 3829 : Part 2 : 1978 Specification for Steam Sterilizers – Part 2 : Horizontal Cylindrical High Speed Steam Sterilizers, Pressure IS 3829 : Part 3 : 1985 Specification for Steam Sterilizers – Part 3 : Pressure Sterilizers, Vertical Cylindrical Type
    IS 3830 : 1979 Specification for Water Stills for Pyrogen-Free Distilled Water
    IS 3831 : 1979 Specification for Sterilizer, Shallow (dressing drum)
    IS 3832 : 1986 Specification for Hand-Operated Chain Pulley Blocks
    IS 3836 : 2000 Fire Safety of Industrial Buildings – Jute Mills – Code of Practice
    IS 3837 : 1976 Accessories for rigid steel conduits for electrical wiring
    IS 3838 : 1966 Specification for Self-raising Flour
    IS 3839 : 1989 Food Yeast – Specification
    IS 3840 : 1996 Lining leather- Specification
    IS 3841 : 1966 Specification for ß – Carotene
    IS 3842 : Part 1 : 1967 Application guide for electrical relays for ac systems: Part 1 Overcurrent relays for feeders and transformers
    IS 3842 : Part 2 : 1966 Application guide for electrical relays for ac systems: Part 2 Overcurrent relays for generators and motors
    IS 3842 : Part 3 : 1966 Application guide for electrical relays for ac systems: Part 3 Phase unbalance relays including negative IS 3842 : Part IV : 1966 Application Guide for Electrical Relays for ac Systems – Part IV : Thermal Relays
    IS 3842 : Part 5 : 1968 Application guide for electrical relays for ac systems: Part 5 Distance protection relays
    IS 3842 : Part VI : 1972 – Application Guide for Electrical Relays for ac Systems – Part VI : Power Relays
    IS 3842 : Part 7 : 1972 Application guide for electrical relays for ac systems: Part 7 Frequency relays
    IS 3842 : Part 8 : 1976 Application guide for electrical relays for ac systems: Part 8 Voltage relays
    IS 3842 : Part 9 : 1977 Applcation guide for electrical relays for ac systems: Part 9 Relays for busbar protection
    IS 3842 : Part X : 1976 Application Guide for Electrical Relays for ac Systems – Part X : Relays for Transverse Differential Protection
    IS 3842 : Part 12 : 1976 Application guide for electrical relays for ac systems: Part 12 Differential relays for transformers
    IS 3843 : 1995 Specification for steel back flap hinges
    IS 3844 : 1989 Code of practice for installation and maintenance of internal fire hydrants and hose reels on premises
    IS 3845 : 1966 Code of practice for joints used in wooden furniture
    IS 3846 : 1984 Specification for Rot-Proofed Cotton Tapes for Aerospace Purposes
    IS 3847 : 1992 Specification for mortice night latches
    IS 3848 : 1981 Method for end quench test for hardenability of steel
    IS 3854 : 1997 Switches for domestic and similar purposes
    IS 3856 : 1966 Method for testing flax fabrics for resistance to attack by micro-organisms
    IS 3857 : 1986 Method for determination of colour fastness of textile materials to acid felting: Mild
    IS 3858 : 1993 Benzyl Acetate – Specification
    IS 3859 : 1966 Method for determination of strength of water soluble azo dyes by reduction with titanium trichloride
    IS 3861 : 2002 Method of Measurement of Plinth, Carpet and Rentable Area of Buildings
    IS 3862 : 1966 Specification for Packing of Rayon Staple Fibres
    IS 3863 : 1966 Methods of chemical analysis of copper-tellurium alloys
    IS 3864 : 1966 Mobile kit for milk testing
    IS 3865 : 2001 Beer – Specification
    IS 3867 : 1966 Specification for Rubber Ice Bags
    IS 3868 : 1966 Specification for Feed Lifting Rock Shaft for Sewing Machines for Household Purposes
    IS 3871 : 1996 Textiles – Fibre ropes and cordage-Glossary of terms
    IS 3872 : 2002 Lining of Canals with Burnt Clay Tiles – Code of Practice
    IS 3873 : 1993 Laying cement concrete/stone slab lining on canals – Code of practice
    IS 3874 : 1987 Specification for Boxing Gloves
    IS 3875 : 1983 Specification for Hot Plate, Wax Levelling, Dental
    IS 3876 : 1985 Specification for Knife, Plaster, Dental
    IS 3877 : 1967 Specification for Wax Knife, Dental
    IS 3878 : 1967 Specification for Plaster Shears, Dental
    IS 3879 : 1967 Specification for Wax Spatula, Dental
    IS 3880 : 1976 Specification for Canned Mango Pulp
    IS 3881 : 1993 Tomato Juice – Specification
    IS 3882 : 1966 Specification for Tomato ketchup
    IS 3883 : 1993 Canned Tomato Concentrate – Tomato Puree – Specification
    IS 3884 : 1993 Canned Tomato Concentrate – Tomato Paste – Specification
    IS 3885 : Part 1 : 1992 Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections
    IS 3885 : Part 2 : 1992 Steel for the Manufacture of Laminated Springs (Railway Rolling Stock) – Part 2 : Rib and Groove Sections
    IS 3886 : 1966 Minimum Requirements for General Purpose Audio Frequency Signal Generators (30 c/s to 30 kc/s)
    IS 3887 : 1978 General requirements for cutting type dental instruments
    IS 3888 : 1987 Specification for Spatula, Stainless Steel, Dental
    IS 3889 : 1985 Specification for Chisels, Dental
    IS 3890 : Part 1 : 1986 Specification for Instruments, Plastic Filling, Dental – Part 1 : Designation Numbers 1, 3, 4, 5 and 6
    IS 3890 : Part II : 1967 Specification for Instruments, Plastic Filling, Dental – Part II : Designation Numbers 12, 20, 21, 46, 47, 153 IS 3891 : 1974 Layout for Honey Processing Plant
    IS 3892 : 1975 Specification for Frozen Lobster Tails
    IS 3893 : 1966 Specification for Slides for Direct Microscopic Count of Milk
    IS 3894 : 1978 Specification for Comb Foundation Mill
    IS 3895 : 1966 Monocrystalline semiconductor rectifier cells and stacks
    IS 3896 : Part I : 1978 Comparison of Indian and Overseas Standards for Iron Castings – Part I : Grey Iron Castings
    IS 3896 : Part 2 : 1985 Comparison of Indian and Overseas Standards for Iron Castings – Part 2 : Spheroidal or Nodular Graphite IS 3898 : 1981 Specification for Zineb, Technical
    IS 3899 : 1981 Specification for Zineb Water Dispersible Powders
    IS 3900 : 1975 Specification for Ziram, Technical
    IS 3901 : 1975 Specification for Ziram Water Dispersible Powder
    IS 3902 : 1975 Specification for Dimethoate, Technical
    IS 3903 : 1984 Specification for Dimethoate Emulsifiable Concentrates
    IS 3904 : 1966 Specification for Thiometon Concentrates
    IS 3905 : 1966 Specification for Thiometon Emulsifiable Concentrates
    IS 3906 : 1995 Crop Protection Equipment – Hand-operated Knapsack Sprayer, Piston Type – Specification
    IS 3908 : 1986 Aluminium equal leg angles
    IS 3909 : 1986 Specification for Aluminium Unequal Leg Angles
    IS 3910 : 1992 Requirements for rotating element current meters (cup type) for water flow measurement
    IS 3911 : 1994 Surface floats – Functional requirements
    IS 3912 : 1993 Sounding rods – Functional requirements
    IS 3913 : 1966 Specification for suspended sediment load samplers
    IS 3915 : 1966 Methods of Measurements on Audio Frequency Signal Generators (30 c/s to 30 kc/s)
    IS 3916 : 1966 Code of practice for pig housing
    IS 3917 : 1966 Specification for scoop type bed material samplers
    IS 3918 : 1966 Code of practice for use of current meter (cup type) for water flow measurement
    IS 3919 : 1966 Methods for sampling of cotton fabrics for determination of physical characteristics
    IS 3920 : 1985 Methods for sampling of cotton yarn for the determination of physical charateristics
    IS 3921 : 1985 Aluminium channels
    IS 3922 : 1966 Recommendation for ghee refinery
    IS 3923 : 1983 Specification for Leg Guards for Cricket Batsmen and Wicket Keepers
    IS 3924 : 1980 Specification for Benzyl Alcohol
    IS 3925 : 1980 Specification for Eugenol
    IS 3926 : 1986 Specification for Methyl Cinnamate
    IS 3927 : 1986 Specification for iso-butyl Phenyl Acetate
    IS 3928 : 1986 Specification for Styralyl Acetate
    IS 3929 : 1984 Specification for Amyl Salicylate
    IS 3930 : 1994 Flame and induction hardening steels
    IS 3933 : 1966 Colour Identification of Gas Cylinders and Related Equipment Intended for Medical Use
    IS 3934 : 1989 Aluminium Plug Type Spindles for Spinning and Doubling Frames – Specification
    IS 3935 : 1966 Code of practice for composite construction
    IS 3936 : 1966 Porcelain mortars and pestles
    IS 3937 : Part 1 : 1974 Recommendations for socketing of wire ropes:Part 1 Socketing with zinc
    IS 3937 : Part 2 : 1974 Recommendations for socketing of wire ropes:Part 2 Socketing with white metal
    IS 3937 : Part 3 : 1994 Recommendations for socketing of wire ropes Part 3 Socketing with resins
    IS 3938 : 1983 Specification for Electric Wire Rope Hoists
    IS/ISO 3939 : 1977 Fluid Power Systems and Components – Multiple Lip Packing Sets – Methods for Measuring Stack Heights
    IS 3940 : 1989 Ships’ – Exhaust ventilators – specification
    IS 3941 : 1966 Specification for Cabin Ventilators
    IS 3942 : 1966 Specification for Marine Sounding Rods
    IS 3943 : 1966 Specification for Voice Pipe and Voice Pipe Fittings
    IS 3944 : 1982 Methods for determination of flowtime by use of flow cups
    IS 3946 : 1966 Specification for Leather for Leg Guard
    IS 3947 : 1994 Shipbuilding – Testing, installation and maintenance of marine portable fire appliances – Code of practice
    IS 3948 : 1986 Specification for Calibrated High Tensile Steel (Round Link) Chain (Electric Butt Welded) for Chain Conveyors and IS 3949 : 1971 Dimensions and Screw Thread for Lamp Used in Laryngoscopes
    IS 3950 : 1979 Specification for surface boxes for sluice valves
    IS 3951 : Part 1 : 1975 Specification for hollow clay tiles for floors and roofs Part 1 Filler type
    IS 3951 : Part 2 : 1975 Specification for hollow clay tiles for floors and roofs Part 2 Structural type
    IS 3952 : 1988 Specification for burnt clay hollow bricks for walls and partitions
    IS 3953 : 1966 High temperature ceramic combustion boats
    IS 3954 : 1991 Hot Rolled Steel Channel Sections for General Engineering Purposes – Dimensions
    IS 3956 : 1967 Dimensions and spools for magnetic tapes for sound recording and reproduction
    IS 3957 : 1966 Quality tolerances for water for ice manufacture
    IS 3958 : 1984 Methods of sampling cosmetics
    IS 3959 : 1978 Specification for Skin Powders
    IS 3960 : 1967 Specification for Totalizing Weighing Machines
    IS 3961 : Part 1 : 1967 Recommended current ratings for cables: Part 1 Paper insulated lead sheathed cables
    IS 3961 : Part 2 : 1967 Recommended current ratings for cables: Part 2 PVC insulated and PVC sheathed heavy duty cables
    IS 3961 : Part 3 : 1968 Recommended current ratings for cables: Part 3 Rubber insulated cables
    IS 3961 : Part 5 : 1968 Recommended current ratings for cables: Part 5 PVC insulated light duty cables
    IS 3962 : 1967 Specification for Waxed Paper for General Packaging
    IS 3963 : 1987 Roof extractor units
    IS 3964 : 1980 Light rails
    IS 3965 : 1981 Dimensions for wrought aluminium and aluminium alloy bar, rod and section
    IS 3966 : 1967 Specification for DW-Flour Jute Cloth
    IS 3967 : 1975 Specification for Cutch
    IS 3968 : 1967 Specification for Wattle Bark
    IS 3969 : 1975 Specification for Goran Bark
    IS 3971 : 1976 Glossary of terms on pallets
    IS 3972 : 1968 Methods of test for vitreous enamelware
    IS 3972 : Part 1 : Sec 1 : 1982 Methods of test for vitreous enamelware – Part 1 : Production of specimens for testing – Section IS 3972 : Part 1 : Sec 2 : 1982 Methods of Test for Vitreous Enamelware – Part 1 : Preparation of Specimen for Testing – Section IS 3972 : Part 2 : Sec 1 : 1985 Methods of Test for Vitreous Enamelware – Part 2 : Test Methods – Section I : Resistance to Citric IS 3972 : Part 2 : Sec 2 : 1985 Methods of test for vitreous enamelware – Part 2 : Test methods – Section 2 : Low and high voltage IS 3972 : Part 2 : Sec 3 : 1988 Methods of test for vitreous enamelware – Part 2 : Test methods – Section 3 : Resistance to boiling IS 3972 : Part 2 : Sec 4 : 1988 Methods of test for vitreous enamelware – Part 2 : Test methods – Section 4 : Resistance to thermal IS 3972 : Part 2 : Sec 5 : 1988 Methods of test for vitreous enamelware – Part 2 : Test methods – Section 5 : Resistance to hot IS 3972 : Part 2 : Sec 6 : 1988 Methods of test for vitreous enamelware – Part 2 : Test methods – Section 6 : Reflectance and specular IS 3972 : Part 2 : Sec 7 : 1990 Methods of test for vitreous enamelware – Part 2 : Test methods – Section 7 : Resistance to boiling IS 3972 : Part 2 : Sec 8 : 1990 Methods of test for vitreous enamelware – Part 2 : Test methods – Section 8 : Resistance to heat
    IS 3972 : Part 2 : Sec 9 : 1991 Methods of test for vitreous enamelware – Part 2 : Test methods – Section 9 : Resistance to dilute IS 3972 : Part 2 : Sec 11 : 1995 Methods of test for vitreous enamelware – Part 2 : Test methods – Section 11 : Resistance to abrasion
    IS 3972 : Part 2 : Sec 12 : 1999 Methods of test for vitreous enamelware – Part 2 : Test methods – Section 12 : Resistance to torsion
    IS 3973 : 1984 Code of practice for the selection, installation and maintenance of wire ropes
    IS 3974 : 1967 Specification for Bifurcated Rivets for General Purposes
    IS 3975 : 1999 Mild steel wires, formed wires and tapes for armouring of cables
    IS 3976 : 1995 Safety rubber-canvas boots for miners – Specification
    IS 3978 : 1993 Code of practice for manufacture of burnt clay Mangalore pattern roofing tiles
    IS 3979 : 1998 Shipbuilding – Testing of Marine Diesel Engines – Code of Practice
    IS 3980 : 1982 Specification for Porous Metal Powder Oil-Impregnated Bearings
    IS 3982 : 1997 Sheepskin leather for orthopaedic linings – Specification
    IS 3983 : 1966 Specification for Goatskin Parchment for Orthopedic Purposes
    IS 3984 : 2002 Textile – DW-Flour Bags – Specification
    IS 3985 : 1983 Specification for Leather for Rugby Ball
    IS 3986 : 1988 Specification for Sodium Lauryl Sulphate for Cosmetic Industry
    IS 3987 : 1983 Specification for Sorbitol solution (70 percent) for cosmetic industry
    IS 3988 : 1981 Specification for Guar Gum
    IS 3989 : 1984 Centrifugally cast (spun) iron spigot and socket soil,waste and ventilating pipes, fittings, and accessories
    IS 3990 : 1967 Specification for combustion tubes
    IS 3991 : 1993 Bowls, lotion – Specification
    IS 3992 : 1982 Specification for Trays, Kidney
    IS 3993 : 1993 Trays, instruments – Specification
    IS 3994 : 1993 Bowls, wash – Specification
    IS 3995 : 1980 Specification for Mugs
    IS 3996 : 1982 Specification for Spittoons
    IS 3997 : 1982 Specification for Jars, Ointment
    IS 3998 : 1982 Specification for Cups, Medicine
    IS 3999 : 1966 Specification for Casein Based Aqueous Pigments and Finishes
    IS 4000 : 1992 Code of practice for high strength bolts in steel structures
    IS 4001 : 1995 Mine tubs – Specification
    IS 4003 : Part 1 : 1978 Specification for Pipe Wrenches – Part 1 : General Purpose
    IS 4003 : Part 2 : 1986 Specification for Pipe Wrenches – Part 2 : Heavy Duty
    IS 4005 : 1967 Specification for Tungsten Carbide for Mining Tools
    IS 4006 : Part 1 : 1985 Methods of Test for and Pulp Based Packaging Materials – Part 1
    IS 4006 : Part 2 : 1985 Methods of Test for Paper and Pulp Based Packaging Materials – Part 2
    IS 4006 : Part 3 : 1985 Methods of Test for Paper and Pulp Based Packaging Materials – Part 3
    IS 4007 : Part I : 1982 Specification for Terminals for Electronic Equipment – Part I : General Requirements and Tests
    IS 4007 : Part 2 : Sec 1 : 1983 Specification for Terminals for Electronic Equipment – Part 2 : Detail Specification for Terminals IS 4007 : Part 2 : Sec 2 : 1983 Specification for Terminals for Electronic Equipment – Part 2 : Detail Specification for Terminals IS 4007 : Part 2 : Sec 3 : 1983 Specification for Terminals for Electronic Equipment – Part 2 : Detail Specification for Terminals IS 4007 : Part 2 : Sec 4 : 1983 Specification for Terminals for Electronic Equipment – Part 2 : Detail Specification for Terminals IS 4007 : Part 2 : Sec 5 : 1983 Specification for Terminals for Electronic Equipment – Part 2 : Detail Specification for Terminals IS 4007 : Part 2 : Sec 6 : 1983 Specification for Terminals for Electronic Equipment – Part 2 : Detail Specification for Terminals IS 4007 : Part 2 : Sec 7 : 1983 Specification for Terminals for Electronic Equipment – Part 2 : Detail Specification for Terminals IS 4007 : Part 2 : Sec 8 : 1983 Specification for Terminals for Electronic Equipment – Part 2 : Detail Specification for Terminals IS 4007 : Part 2 : Sec 9 : 1983 Specification for Terminals for Electronic Equipment – Part 2 : Detail Specification for Terminals IS 4007 : Part 2 : Sec 10 : 1983 Specification for Terminals for Electronic Equipment – Part 2 : Detail Specification for Terminals IS 4008 : 1985 Guide for presentation of project report for river valley projects
    IS 4009 : Part I : 1981 Specification for Grease Nipples – Part 1 : Button Head Grease Nipples
    IS 4009 : Part II : 1981 Specification for Grease Nipples – Part II : Conical Head Grease Nipples
    IS 4009 : Part 3 : 1995 Lubricating Equipment – Grease nipples Part 3 – Cup type – Specification
    IS 4010 : 1967 Specification for Sounding Pipes
    IS 4011 : 1997 Methods of test for safety evaluation of cosmetics
    IS 4012 : 1967 Specification for Dust-proof Electric Lighting Fittings
    IS 4013 : 1967 Dust-tight electric lighting fittings
    IS 4014 : Part 1 : 1967 Code of practice for steel tubular scaffolding Part 1 Definitions and materials
    IS 4014 : Part II : 1967 Code of Practice for Steel Tubular Scaffolding – Part II : Safety Regulations for Scaffolding
    IS 4015 : 1998 Guide for Handling Cases of Pesticide Poisoning
    IS 4016 : 2002 Density Composition Tables for Aqueous Solutions of Sodium Hydroxide – Specification
    IS 4017 : 1992 Carpenter’s Squares – Specification
    IS 4019 : 1967 Specification for Firm-joint Dividers
    IS 4020 : Parts 1 to 16 : 1998 Door Shutters – Methods of Tests
    IS 4021 : 1995 Timber Door, Window and Ventilator Frames – Specification
    IS 4022 : 1996/ISO 883 : 1985 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole – Dimensions
    IS 4023 : 1991 Methods for the determination of reactivity of coke
    IS 4025 : 1983 Gauging practice for rolling bearings
    IS 4026 : 1987 Aluminium ingots billets and wire bars (EC grade)
    IS 4027 : Part 1 : 1987 Methods of chemical analysis of bronzes Part 1 Determination of copper and lead by electrolytic method
    IS 4027 : Part 2 : 1987 Methods of chemical analysis of bronzes Part 2 Determination of manganese-photometric method
    IS 4027 : Part 3 : 1987 Methods of chemical analysis of bronzes Part 3 Determination of phosphorus by volumetric method
    IS 4027 : Part 4 : 1987 Methods of chemical analysis of bronzes Part 4 Determination of nickel-dimethylglyoxime photometric method
    IS 4027 : Part 5 : 1987 Methods of chemical analysis of bronzes Part 5 Determination of tin-iodimetric method
    IS 4027 : Part 6 : 1987 Methods of chemical analysis of bronzes Part 6 Determination of zinc by complexometric (EDTA) method
    IS 4027 : Part 7 : 1990 Methods of chemical analysis of bronzes Part 7 Determination of antimony by Rhodamine B spectrophotometric IS 4027 : Part 8 : 1991 Methods of chemical analysis of bronzes Part 8 Determination of iron
    IS 4027 : Part 9 : 1991 Methods of chemical analysis of bronzes Part 9 Determination of aluminium by AAS method
    IS 4027 : Part 10 : 2000 Chemical Analysis of Bronzes – Methods – Part 10 : Determination of Silicon
    IS 4027 : Part 11 : 2000 Chemical Analysis of Bronzes – Methods – Part 11 : Determination of Lead – Ethylenediamine Tetra-acetic IS 4028 : 1992 Beeswax, Bleached for Cosmetic Industry – Specification
    IS 4029 : 1967 Guide for testing three-phase induction motors
    IS 4031 : Part 1 : 1996 Methods of physical tests for hydraulic cement: Part 1 Determination of fineness by dry sieving
    IS 4031 : Part 2 : 1999 Methods of physical tests for hydraulic cement: Part 2 Determination of fineness by specific surface by Blaine IS 4031 : Part 3 : 1988 Methods of physical tests for hydraulic cement: Part 3 Determination of soundness
    IS 4031 : Part 4 : 1988 Methods of physical tests for hydraulic cement: Part 4 Determination of consistency of standard cement IS 4031 : Part 5 : 1988 Methods of physical tests for hydraulic cement: Part 5 Determination of initial and final setting times
    IS 4031 : Part 6 : 1988 Methods of physical tests for hydraulic cement: Part 6 Determination of compressive strength of hydraulic IS 4031 : Part 7 : 1988 Methods of physical tests for hydraulic cement: Part 7 Determination of compressive strength of masonry IS 4031 : Part 8 : 1988 Methods of physical tests for hydraulic cement: Part 8 Determination of transverse and compressive strength IS 4031 : Part 9 : 1988 Methods of physical tests for hydraulic cement: Part 9 Determination of heat of hydration
    IS 4031 : Part 10 : 1988 Methods of physical tests for hydraulic cement: Part 10 Determination of drying shrinkage
    IS 4031 : Part 11 : 1988 Methods of physical tests for hydraulic cement: Part 11 Determination of density
    IS 4031 : Part 12 : 1988 Methods of physical tests for hydraulic cement: Part 12 Determination of air content of hydraulic cement IS 4031 : Part 13 : 1988 Methods of Physical Tests for Hydraulic Cement – Part 13 : Measurement of Water Retentivity of Masonry IS 4031 : Part 14 : 1989 Methods of physical test for hydraulic cement Part 14 Determination of false set
    IS 4031 : Part 15 : 1991 Methods of physical test for hydraulic cement Part 15 Determination of fineness by wet sieving
    IS 4032 : 1985 Method of chemical analysis of hydraulic cement
    IS/ISO 4033 : 1979 Industrial Fasteners – Threaded Steel Fasteners – Hexagon Nuts of Style 2 – Product Grade A and B – Specification
    IS 4033 : 1968 General Requirements for Hospital Furniture
    IS 4034 : 1979 Specification for Castors for Hospital Equipment
    IS 4035 : 1967 Specification for Trolleys, Stretcher
    IS 4036 : 1967 Specification for Trolleys, Patient
    IS 4037 : 1967 Specification for Stretchers and Stretcher Carriers
    IS 4038 : 1986 Specification for foot valves for water works purposes
    IS 4039 : 1975 Code for packaging of ready made garments for export
    IS 4040 : 1998 Fasteners – Solid Drilled Tubular and Semi-Tubular Rivets – Specification
    IS 4041 : 1987 Glossary of Terms Relating to Refractory Materials
    IS 4043 : 1969 Recommendations for Symbolic Designation of Direction of Closing and Faces of Doors, Windows and Shutters
    IS 4044 : 1993 Textiles – Gents’ Slipover, Knitted – Specification
    IS 4045 : 1982 General requirements for magnetic compasses and binnacles, Class A for use in sea navigation
    IS 4046 : Part I : 1981 Specification for Gent’s Cotton Rib-Knitted Briefs – Part I : 1 x 1, 2 Ply Rib-Knitted
    IS 4046 : Part 2 : 1996 Textiles- Gents’ cotton briefs – Specification Part 2: Plain knitted
    IS 4048 : 1989 Density composition tables for aqueous solutions of sulphuric acid
    IS 4049 : Part 1 : 1988 Specification for Formed Ends for Tanks and Pressure Vessels – Part 1 : Based on Outside Diameter
    IS 4049 : Part 2 : 1996 Formed ends for tanks and pressure vessels – Specification Part 2 Based on inside diameter basis
    IS 4050 : 1976 Methods of tests for horn switches for automobiles
    IS 4051 : 1967 Code of practice for installation and maintenance of electrical equipment in mines
    IS 4052 : 1983 Specification for Spring Callipers
    IS 4053 : 1967 Specification for Knitted Puttees, Dyed
    IS 4054 : 1966 Specification for Neatsfoot Oil
    IS 4055 : 1966 Specification for Maize (Corn) Oil
    IS 4056 : 1966 Specification for Fish Oil for Leather Industry
    IS 4057 : 1986 Specification for Carpenters’, Adjustable Metal Bodied Bench Planes
    IS 4060 : 1994 Automotive vehicles – Flashers for direction indicators – Specification
    IS 4061 : 1967 Specification for Headlight Switches for Automobiles
    IS 4062 : 1986 Specification for Foot-Operated Head-Light Dip Switches for Automobiles
    IS 4063 : 1982 Specification for Fuse Box for Automobiles
    IS 4066 : 1967 Specification for Metal Hooks, Clips and Eyes
    IS 4067 : 1967 Specification for Tube, Swab (West Type), for Throat
    IS 4069 : 1967 Specification for Urinometer
    IS 4070 : 1967 Specification for Wheel Weighers
    IS 4071 : 1986 Specification for Master Gears
    IS 4072 : 1975 Specification for Steel for Spring Washers
    IS 4073 : 1967 Specification for fish weights
    IS 4074 : 1981 Specification for Grading for Monsooned Coffee
    IS 4075 : 1985 Method for macrostreak flaw test for steel
    IS 4076 : 1983 Hard brass wires for springs and other special purposes
    IS 4078 : 1980 Code of practice for indexing and storage of drill cores
    IS 4079 : 1967 Specification for Canned Rasogolla
    IS 4080 : 1994 Vertical staff gauges – Functional requirements
    IS 4081 : 1986 Safety code for blasting and related drilling operations
    IS 4082 : 1996 Recommendations on stacking and storage of construction materials and components at site
    IS 4083 : 1967 Specification for Spring Dividers
    IS 4084 : 1978 Specification for Eyelets and Washers (Sail)
    IS 4085 : 1967 Specification for Knives, Amputating
    IS 4086 : 1983 Specification for Distributors for Spark Ignition Engines
    IS 4087 : 1980 Specification for Pipette for Haemoglobinometers and Blood Pipette for Biochemical Work
    IS 4088 : 1966 Specification for KUSUM Oil
    IS 4089 : 1967 Specification for Forceps, Clip Removing, Michel Pattern
    IS 4090 : 1967 Criteria for design of reinforced concrete arches
    IS 4091 : 1979 Code of Practice for Design and Construction of Foundations for Transmission Line Towers and Poles
    IS 4092 : Part 1 : 1992 Centrifuges of the basket and bowl and vibrating type for use in industrial and commercial application Part IS 4093 : 1981 Non-refillable liquefied petroleum gas containers
    IS 4094 : 1967 Specification for Forceps, Sterilizer, Cheatle’s Pattern
    IS 4095 : 1991 Pincers – Specification
    IS 4097 : 1967 Specification for Gravel for Use as Pack in Tubewells
    IS 4098 : 1983 Specification for lime-pozzolana mixture
    IS 4100 : 1988 Alcoholic Drinks – Gin – Specification
    IS 4101 : Part 1 : 1967 Code of practice for external facing and veneers: Part I Stone facing
    IS 4101 : Part II : 1967 Code of Practice for External Facings and Veneers – Part II : Cement Concrete Facing
    IS 4101 : Part 3 : 1985 Code of Practice for External Cladding – Part 3 : Wall Tiling and Mosaics
    IS 4102 : 1983 Specification for Leather for Shuttlecock Caps
    IS 4103 : 1977 Specification for metal nesting chairs
    IS 4104 : 1967 Method of chemical analysis of rutile
    IS 4105 : 1988 Specification for Styrene (Vinyl Benzene)
    IS 4106 : 1994 Textiles – Bunting Cloth, Cotton Khadi, Dyed – Specification
    IS 4107 : 1994 Textiles -Blanketing cloth, wool khadi – Specification
    IS 4108 : 1984 Specification for Snap Fasteners for Dresses
    IS 4109 : 1967 Specification for KADAHIES
    IS 4110 : 1967 Glossary of terms used in high vacuum technology
    IS 4111 : Part 1 : 1986 Code of practice for ancillary structures in sewerage system: Part I Manholes
    IS 4111 : Part 2 : 1985 Code of practice for ancillary structures in sewerage system: Part II Flusing tanks
    IS 4111 : Part 3 : 1985 Code of practice for ancillary structures in sewerage system: Part III Inverted syphon
    IS 4111 : Part IV : 1968 Code of Practice for Ancillary Structures in Sewerage System – Part IV : Pumping Stations and Pumping IS 4111 : Part 5 : 1993 Code of practice for ancillary structures in sewerage system: Part 5 Tidal outfalls
    IS 4113 : Part 1 : 1986 /ISO 7376-1 : 1984 Specification for Laryngoscopes – Part 1 : Hook-on Type Handle-Blade Fittings
    IS 4113 : Part 2 : 1986 /ISO 7376-2 : 1984 Specification for Laryngoscopes – Part 2 : Miniature Electric Lamps – Screw Threads IS 4115 : 1967 Methods for Sampling of Oilseeds
    IS 4116 : 1988 Specification for wooden shelving cabinets (adjustable type)
    IS 4117 : 1973 Specification for Alcohol Denaturants
    IS 4119 : 1995 Press – Charcoal Burning – Specification
    IS 4120 : 1967 Specification for Tubs and Baths
    IS 4121 : 1967 Method of test for determination of water transmission rate by capillary action through natural building stones
    IS 4122 : 1967 Method of test for surface softening of natural building stones by exposure to acidic atmospheres
    IS 4123 : 1982 Specification for Chain Pipe Wrenches
    IS 4124 : 1981 Glossary of terms relating to powders
    IS 4126 : 1986 Specification for Wooden Wardrobes (Adjustable and Non-adjustable Type)
    IS 4127 : 1983 Code of practice for laying of glazed stoneware pipes
    IS 4128 : 1980 Specification for Fireman’s Leather Boots
    IS 4129 : 1967 Methods of chemical analysis of aluminium trifluoride
    IS 4130 : 1991 Safety code for demolition of buildings
    IS 4131 : 1967 Nickel copper alloy castings
    IS 4132 : 1984 Method for calibration of standardized blocks to be used for Brinell hardness teing machines
    IS 4133 : 2002 Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines
    IS 4133 : Part 1 : 1986 Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing Machines – Part IS 4134 : 1967 Recommended colour classification of rough diamonds
    IS 4135 : 1974 Specification for Hospital Rubber Sheetings
    IS 4137 : 1985 Code of practice for heavy duty electric overhead travelling cranes including special service machines for use in IS 4138 : 1977 Safety code for working in compressed air
    IS 4139 : 1989 Specification for calcium silicate bricks
    IS 4140 : 1978 Limestone for use in foundries
    IS 4141 : 1988 Specification for Table Tennis Rackets
    IS 4142 : 1967 Specification for Discus
    IS 4143 : 1967 Specification for Carrom-draughts
    IS 4144 : 1967 Specification for Carrom-strikers
    IS 4145 : 1987 Code of practice for storage of ropes
    IS 4146 : 1983 Application guide for voltage transformers
    IS 4147 : 1981 Methods of measurements for electron tubes receiving and transmitting tubes
    IS 4148 : 1989 Surgical Rubber Gloves – Specification
    IS 4149 : 1967 Specification for Post-mortem Rubber Gloves
    IS 4150 : 1984 Potassium chloride, technical
    IS 4151 : 1993 Specification for protective helmets for scooter and motorcycle riders
    IS 4152 : 1989 Seamless Carbon Dioxide Cylinders for Fire-fighting Purposes on Boardship – Specification
    IS 4154 : 1967 Specification for Endotracheal Connections
    IS 4155 : 1966 Glossary of terms relating to chemical and radiation hazards and hazardous chemicals
    IS 4156 : 1967 Methods for sampling of barytes
    IS 4158 : 1985 Solid embedded type electric heating elements
    IS 4159 : 2002 Mineral Filled Sheathed Heating Elements – Specification
    IS 4160 : 1967 Interlocking switch socket outlet
    IS 4161 : 1967 Nessler cylinders
    IS 4162 : Part I : 1985 – Specification for Graduated Pipettes – Part I : General Requirements
    IS 4162 : Part 2 : 1985 Specification for Graduated Pipettes – Part 2 : Pipettes for which no Waiting Time is Specified
    IS 4162 : Part 3 : 1985 Specification for Graduated Pipettes – Part 3 : Pipettes for which a Waiting Time of 15s is Specified
    IS 4162 : Part 4 : 1985 Graduated pipettes: Part 4 Blow-out pipettes
    IS 4163 : 1982 Method for determination of inclusion content in steel by macroscopic method
    IS 4164 : 1976 Specification for Lifting `C’ Hooks with Eye – Capacity up to 25 Tonnes
    IS 4165 : 1991 Thermostats for general purpose electric ovens
    IS 4166 : 1967 Methods of sampling of ilmenite and rutile
    IS 4167 : 1980 Glossary of terms relating to air pollution
    IS 4169 : 1988 Method for calibration of force-proving instruments used for the verification of uniaxial testing machines
    IS 4170 : 1967 Brass rods for general engineering purposes
    IS 4171 : 1983 Copper rods and bars for general engineering purposes
    IS 4172 : 1987/ISO 885 : 1976 Dimensions for radii under the head of bolts and screws
    IS 4173 : 1975 4-methyl aminophenol sulphate
    IS 4174 : 1977 Specification for Typewriter Ribbons, Cotton
    IS 4175 : 1981 Correcting fluid
    IS 4178 : 1967 Specification for Eyenuts with Collars
    IS 4179 : 1967 Sizes of process vessels and leading dimensions
    IS 4180 : 1967 Code of practice for corrosion protection of light gauge steel sections used in building
    IS 4181 : 1967 Specification for Feed Fork for Sewing Machines for Household Purposes
    IS 4182 : 1988 Misch metal
    IS 4183 : 1967 Specification for metal hand rammers
    IS 4184 : 1967 Steel wheel barrows (with two wheels)
    IS 4185 : 1989 Adhesive Paper Tapes – Specification
    IS 4186 : 1985 Guide for preparation of project report for river valley projects
    IS 4187 : 1967 Specification for Skewers for Use on Cotton Speed Frames
    IS 4188 : 1996 Household sewing machines – Oscillating shafts – Specification
    IS 4189 : 1967 Specification for Firm-joint Inside and Outside Calipers
    IS 4190 : 1984 Specification for Eye Bolts with Collars
    IS 4191 : 1967 Specification for Leather for Volleyball
    IS 4193 : 1986 Specification for Guar Meal as Livestock Feed Ingredient
    IS 4199 : 2001 Toilet Soap, Liquid – Specification
    IS 4200 : 1984 Sodium aluminate
    IS 4201 : 1983 Application Guide for Current Transformer
    IS 4202 : 1967 Method for determination of chloride content of textile materials
    IS 4203 : 1967 Method for determination of sulphate content in textile materials
    IS 4204 : 1974 Functional Requirements for Drafting Chairs
    IS 4205 : 1989 Specification for drafting stools
    IS 4206 : 1987/ISO 888 : 1976 Dimensions for nominal lengths and thread lengths for bolts, screws and studs
    IS 4207 : 1967 Leather for football
    IS 4208 : 1985 Specification for Brush, Stencil
    IS 4209 : 1987 Code of Safety in Chemical Laboratories
    IS 4210 : 1967 Specification for Strip Feeler Gauges for Electrical Purposes
    IS 4211 : 1993 Gauges – Thread Pitch Gauges for ISO Metric Screw Threads (pitch range 0.4 to 6 mm) – Specification
    IS 4213 : 1991 Engineering metrology – Vernier depth gagues upto 300 mm – Specification
    IS 4214 : 1997 Brushes, Boiler Tube (without shank) – Specification
    IS 4215 : 1983 Specification for Ring Type Needle Bearings
    IS 4216 : 1981 Specification for Needle Cages
    IS 4217 : 1981 Specification for Needle Rollers
    IS 4218 : Part 1 : 2001 /ISO 68-1 : 1998 ISO General Purpose Metric Screw Threads – Part 1 : Basic Profile
    IS 4218 : Part 2 : 2001 /ISO 261 : 1998 ISO General Purpose Metric Screw Threads – Part 2 : General Plan
    IS 4218 : Part 3 : 1999 /ISO 724 : 1993 ISO General Purpose Metric Screw Threads – Part 3 : Basic Dimensions
    IS 4218 : Part 4 : 2001 ISO General Purpose Metric Screw Threads – Part 4 : Selected Sizes for Screws, Bolts and Nuts
    IS 4221 : 1967 Quality tolerances for water for tanning industry
    IS 4222 : 1967 Coloured chalks, moulded
    IS 4223 : 1975 Specification for Steel Wire for Umbrella Ribs
    IS 4224 : 1972 Specification for Steel Wire for Staples, Pins and Clips
    IS 4225 : 1979 Recommended practice for straight beam ultrasonic testing of steel plates
    IS 4226 : 1988 Code of practice for fire safety of industrial building: Aluminium/Magnesium powder factories
    IS 4227 : 1998 Texties – Braided nylon cords for aerospace purposes – Specification (Amalganmating IS 4437)
    IS 4228 : 1979 Specification for Nylon Tapes for Aerospace Purposes
    IS 4229 : 1992 Textiles – Nylon sewing threads for aerospace purposes – Specification
    IS 4230 : 1967 Specification for Lock, Lever Tumbler Type
    IS 4231 : 1967 Specification for Locks, Miller Type
    IS 4236 : 1999 Glyceryl Monostearate for Cosmetic Industry – Specification
    IS 4238 : 1967 Specification for Sterilized Milk
    IS 4239 : 1970 Specification for Mechanical Bevel Protractors
    IS 4240 : 1984 Glossary of conveyors terms and definitions
    IS 4241 : 1990 Engineering metrology – Engineer’s parallels – Specification
    IS 4242 : 1967 Method of Measurement of Acoustical Noise Emitted by Ballasts for Gaseous Discharge Lamps
    IS 4244 : 1967 Retractors, skin, double ended
    IS 4245 : 1967 Specification for Needle Holder (Gillies) Combined with Scissors, for Plastic Surgery
    IS 4246 : 2002 Domestic Gas Stoves for use with Liquefied Petroleum Gases – Specification
    IS 4247 : Part 1 : 1993 Code of practice for structural design of surface hydroelectric power stations: Part 1 Data for design
    IS 4247 : Part 2 : 1992 Code of Practice Structural Design of Hydroelectric Power – Part 2 : Superstructure
    IS 4247 : Part 3 : 1998 Code of practice for structural design of surface hydel power stations Part 3 Substructure
    IS 4248 : 1967 Non-ignitable and self-extinguishing boards (with mineral base) for electrical purposes
    IS 4249 : 1967 Classification and methods of tests for non-ignitable and self-extinguishing properties of solid electrical insulating IS 4250 : 1980 Specification for Domestic Electric Food-Mixers (Liquidizes and Grinders)
    IS 4251 : 1967 Quality tolerances for water for processed food industry
    IS 4252 : 1982 Electroplated coatings of gold for decorative purposes
    IS 4253 : Part I : 1980 Specification for Cork Composition Sheets – Part I : Plain Cork Sheets
    IS 4253 : Part II : 1980 Specification for cork composition sheets – Part II : Cork and Rubber
    IS 4254 : 1994 Jaw crushers – General requirements
    IS 4255 : 1967 Specification for Gyratory and Cone Crushers
    IS 4256 : 1967 Hydrated calcium sulphate from marine brine
    IS 4257 : Part I : 1981 – Dimensions for Clamping Arrangements for Porcelain Transformer Bushings – Part I : For 12 kV to 36 kV IS 4257 : Part 2 : 1986 Dimensions for clamping arrangements for porcelain transformer bushings: Part 2 For 72.5 kV and 123 IS 4258 : 1982 Hardness conversion tables for metallic materials
    IS 4259 : 1967 Code of practice for erection and calibration of direction finders (medium frequency) for marine use
    IS 4260 : 1986 Recommended practice for ultrasonic testing of butt welds in ferritic steel
    IS 4261 : 2001 Glossary of Terms Relating to Paper- and Pulp-based Packaging Materials
    IS 4262 : 2002 Sulphuric Acid – Code of Safety
    IS 4263 : 1967 Code of safety for chlorine
    IS 4264 : 1967 Code of safety for caustic soda
    IS 4265 : 1975 Specification for 4,4′-Diaminostilbene-2,2′-Disulphonic Acid
    IS 4266 : 1967 Specification for Lockers, Bedside for Hospital Use
    IS 4267 : 1967 Specification for Stands, Wash Hand Basin
    IS 4268 : 1992 Air depolarized primary wet cells
    IS 4269 : 1981 Dextrin for use in foundries
    IS 4270 : 2001 Steel Tubes Used for Water Wells – Specification
    IS 4272 : 1986 Specification for Vanillin
    IS 4273 : 1984 Specification for iso-bornyl Acetate
    IS 4274 : 1981 Specification for Buckles
    IS 4275 : 1967 Specification for Scissors, Kilner’s for Plastic Surgery
    IS 4276 : 1977 Specification for Soybean Oil
    IS 4277 : 1975 Specification for Sunflower Oil
    IS 4278 : 1988 Specification for Flexible Shafts for Speedometers and Tachographs
    IS 4279 : 1984 Specification for Goose Neck Clamps
    IS 4280 : 1992 Refined secondary tin ingot
    IS 4281 : 1967 Specification for Scissors, McIndoe’s, for Plastic Surgery
    IS 4282 : 1992 Surgical instruments – Dissecting, forceps, plastic surgery – Shape and dimensions
    IS 4283 : 1981 Hot air fan
    IS 4284 : 1967 Method for volumetric determination of iron
    IS 4285 : 1967 Method for volumetric determination of calcium
    IS 4286 : 1976 Specification for Domestic Coke
    IS 4287 : 1992/ISO 1227 : 1979 Starch – Glossary
    IS 4289 : Part 1 : 1984 Specification for Flexible Cables for Lifts and Other Flexible Connections – Part 1 : Elastomer Insulated IS 4289 : Part 2 : 2000 Flexible Cables for Lifts and Other Flexible Connections – Specification – Part 2 : PVC Insulated Circular IS 4290 : Part 1 : 1992 /ISO 2632-1 : 1985 Roughness Comparison Specimens – Part 1 : Turned, Ground, Bored, Milled, Shaped IS 4290 : Part 2 : 1992/ISO 2632-2 : 1985 Roughness comparison specimens:Part 2 Spark-eroded, shot-blasted and grit blasted, IS 4290 : Part 3 : 1992/ISO 2632-3 : 1985 Roughness comparison specimens:Part 3 Cast surfaces
    IS 4291 : 1996 C-washers – specification
    IS 4292 : 1984 Specification for Strap Clamps
    IS 4293 : 1984 Specification for U-type Clamps
    IS 4294 : 1982 Specification for Jig Buttons
    IS 4295 : 1983 Specification for Locking Dogs (Catches) with Springs
    IS 4296 : 1967 Dimensions for round piercing punches
    IS 4296 : Part 1 : 2002 Tools for Pressing – Part 1 : Round Punches with 60ø Conical Head and Straight Shank
    IS 4296 : Part 2 : 2002 Tools for Pressing – Part 2 : Round Punches with Cylindrical Head and Reduced Shank
    IS 4296 : Part 3 : 2002 Tools for Pressing – Part 3 : Round Punches with Cylindrical Head and Straight Shank
    IS 4296 : Part 4 : 2002/ISO 9181 : 1990 Tools for Pressing – Part 4 : Round Punches with 60° Conical Head and Reduced Shank
    IS 4297 : 1996 spherical washers and conical seats – specification
    IS 4298 : 1996 Swing C-washers – specification
    IS 4299 : 1982 Specification for Jig Feet
    IS 4300 : 1989 Box Pallets for Through Transit of Goods – Specification
    IS 4301 : 1967 Specification for Brushes, Foundry, Flat
    IS 4303 : Part 1 : 1975 Code for hygienic conditions in fish industry: Part 1 Pre-processing stage
    IS 4303 : Part 2 : 1975 Code for hygienic conditions in fish industry: Part 2 Canning stage
    IS 4304 : 1976 Specification for Tuna Canned in Oil
    IS 4305 : 1967 Glossary of Terms Relating to Pozzolana
    IS 4306 : 1987 Specification for Hexamethylenetetramine (hexamine)
    IS 4307 : 1983 Specification for Fish Meal as Livestock Feed Ingredient
    IS 4308 : 2003 Dry Chemical Powder for Fighting B and C Class Fires – Specification
    IS 4309 : 1979 Method of measurement on direct reading pH meters
    IS 4310 : 1967 Weldable steel pipe fittings for marine purposes
    IS 4311 : 1967 Method for the Determination of Mineral Matter in Coal
    IS 4312 : 1967 Code of safety for lead and its compounds
    IS 4313 : 1985 Specification for Pliers, Plate, Dental
    IS 4314 : 1991 Orthodontic Pliers, Cone Socket – Shape, Dimensions and Tests
    IS 4315 : 1985 Specification for Pliers, Bar Bending, Dental, Waldsach’s Type
    IS 4316 : 1991 Orthodontic pliers, snipe nose – Shape,dimensions and tests
    IS 4317 : 1983 Specification for Aluminium Electrolytic Capacitors with Non-solid Electrolyte
    IS 4318 : 1993 Solid core porcelain insulators for overhead traction lines
    IS 4319 : Part 1 : 1986 Specification for Pliers, Stretching and Contouring, Dental – Part 1 : Pliers, Stretching and Contouring
    IS 4319 : Part 2 : 1986 Specification for Pliers, Stretching and Contouring, Dental – Part 2 Pliers, contouring
    IS 4320 : 1982 Specification for Thiram, Technical
    IS 4321 : 1989 Pesticides – 2, 4-D, Technical – Specification
    IS 4322 : 1967 Specification for Endosulfan Dusting Powders
    IS 4323 : 1980 Specification for Endosulfan Emulsifiable Concentrates
    IS 4324 : 1967 Specification for Endosulfan Water Dispersible Powder Concentrates
    IS 4326 : 1993 Code of practice for earthquake resistant design and construction of buildings
    IS 4327 : 1967 Electric fans and regulators for use in ships
    IS 4328 : 1967 Specification for Monocular Dissecting Microscope
    IS 4329 : 1967 Specification for Measuring (Traveling) Microscope
    IS 4330 : 1967 Methods of Measurements on Cathode-Ray Oscilloscope (DC to 10 Mc/s)
    IS 4332 : Part 1 : 1967 Methods of test for stabilized soils: Part 1 Methods of sampling and preparation of stabilized soils for testing
    IS 4332 : Part II : 1967 Methods of Test for Stabilized Soils – Part II : Determination of Moisture Content of Stabilized Soil Mixtures
    IS 4332 : Part 3 : 1967 Methods of test for stabilized soils: Part 3 Test for determination of moisture content-dry density relation IS 4332 : Part 4 : 1968 Methods of test for stabilized soils: Part 4 Wetting and drying, freezing and thawing tests for compacted IS 4332 : Part 5 : 1970 Methods of test for stabilizd soils: Part 5 Determination of unconfined compressive strength of stablized IS 4332 : Part VI : 1972 Methods of Test for Stabilized Soils – Part VI : Flexural Strength of Soil-cement Using Simple Beam With IS 4332 : Part VII : 1973 Methods of Test for Stabilized Soils – Part VII : Determination of Cement Content of Cement Stabilized IS 4332 : Part 8 : 1969 Methods of test for stablized soils: Part 8 Determination of lime content of lime stablized soils
    IS 4332 : Part IX : 1970 Methods of Test for Stabilized Soils – Part IX : Determination of the Bituminous Stabilizer Content of Bitumen IS 4332 : Part 10 : 1969 Methods of test for stabilized soils: Part 10 Test for soil/bituminous mixtures
    IS 4333 : Part 1 : 1996 Methods of Analysis for Foodgrains – Part 1 : Refractions
    IS 4333 : Part 2 : 2002 /ISO 712 : 1998 Method of Analysis for Foodgrains – Part 2 : Determination of Moisture Content
    IS 4333 : Part 3 : 2002 /ISO 7971-2 : 1995 Method of Analysis for Foodgrains – Part 3 : Determination of Hectolitre Weight
    IS 4333 : Part 4 : 2002 /ISO 520 : 1977 Method of Analysis for Foodgrains – Part 4 : Determination of the Mass of 1000 Grains
    IS 4333 : Part V : 1970 Methods of Analysis for Foodgrains – Part V : Determination of Uric Acid
    IS 4334 : 1985 Specification for 2-chloroaniline
    IS 4335 : 1985 Specification for 3-Chloroaniline
    IS 4336 : 1985 Specification for 4-Chloroaniline
    IS 4338 : 1991 Household sewing machines – Vertical oscillating shuttle – Specification
    IS 4339 : 1997 Household Sewing Machines – Needle Bar Link Studs – Specification
    IS 4340 : 1967 Needle bar links for sewing machines for household purposes
    IS 4341 : 1997 Household Sewing Machines – Feed Bar Rollers and Studs – Specification
    IS 4342 : 1967 Specification for Square Slider for Oscillating Rock Shaft for Sewing Machines for Household Purposes
    IS 4343 : 1983 Code of practice for treatment of water for high pressure boilers
    IS 4344 : 1978 Specification for Endosulfan, Technical
    IS 4346 : 1982 Specification for washers for use with fittings for water services
    IS 4347 : 1967 Code of practice for hospital lighting
    IS 4348 : 1973 Methods of test for determination of permeability of natural building stones
    IS 4349 : 1987 Specification for Cylindrical Setting Masters
    IS 4350 : 1967 Specification for concrete porous pipes for under-drainage
    IS 4351 : 2003 Steel Door Frames – Specification
    IS 4352 : 1967 Specification for Pork Luncheon Meat, Canned
    IS 4353 : 1995 Submerged Arc Welding of Mild Steel and Low Alloy Steels – Recommendations
    IS 4354 : Part 1 : 1967 Methods of chemical analysis of magnesium, aluminium brazing alloys, Part 1 Analysis of aluminium, manganese, IS 4355 : 1977 Specification for Fire-resistant Brattice Cloth
    IS 4357 : 1974 Methods for stability testing of forklift trucks
    IS 4358 : 1996 Specification for Sickles
    IS 4359 : 1967 Specification for Kattha
    IS 4360 : 1967 Method for determination of strength of fast bases
    IS/ISO 4362 : 1992 Measurement of Liquid flow in Open Channels – Trapezoidal Profile Weirs
    IS 4362 : 1979 Specification for Number Plate Lighting Devices for Automobiles
    IS 4363 : 1980 Specification for drip counter E. M. S. Pattern
    IS 4364 : 1967 Specification for Pipettes, Serological
    IS 4365 : 1967 Code of practice for application of bitumen mastic for waterproofing of roofs
    IS 4366 : Part 1 : 1985 Specification for Agricultural Tillage Discs Part 1 Concave Type
    IS 4366 : Part 2 : 1985 Specification for Agricultural Tillage Discs Part 2 Flat Type
    IS 4367 : 1991 Alloy steel forgings for general industrial use
    IS 4368 : 1967 Alloy steel billets, blooms and slabs for forging for general engineering purposes
    IS 4370 : 1967 Code of practice for the use of lighting and signalling devices on cars and commercial vehicles
    IS 4371 : 1994 Textiles- Kamblies,wool khadi,loomstate-Specification
    IS 4372 : 1994 Textiles-Cloth,twill,wool khadi,dyed-Specification
    IS 4373 : 1967 Specification for Hydraulically Operated Stop Light Switches for Automobiles
    IS 4374 : 1980 Specification for Mild Steel Fabricated Vertical Bollards with and Without Lugs
    IS 4375 : 1975 Specification for Cotton Knitted Sports Shirts
    IS 4376 : 1996 Textiles- Gents’ cotton short drawers (Trunks)- Specification
    IS 4377 : 1981 General requirements for magnetic sound tape recording and reproducing systems (first revision)
    IS 4378 : Part 1 : 1990 Nippers-Specification – Part 1 : Diagonal Cutting Nippers
    IS 4378 : Part 2 : 1990 Nippers – Specification – Part 2 : End Cutting Nippers
    IS 4379 : 1981 Identification of contents of industrial gas cylinders
    IS 4380 : 1967 Specification for Abney Level
    IS 4381 : 1967 Specification for Pathological Microscope
    IS 4382 : 1967 Specification for Non-tinted Ophthalmic Glass
    IS 4383 : 1983 Specification for Pilot and Embarkation Ladders
    IS 4384 : 1967 Specification for Steel Watertight and Weathertight Doors
    IS 4385 : 1988 Specification for Throwing Hammers
    IS 4386 : 1988 Specification for Putting Shots
    IS 4387 : 1967 Specification for Asymmetric Bars
    IS 4388 : 1982 Specification for Cotton Fabrics for Reinforcement of Rubber Hoses
    IS 4389 : 1987 Method for determination of colour fastness of textile materials to hot water
    IS 4390 : 2001 Textiles – Method for Estimation of Solvent Soluble Matter in Textile Material
    IS 4392 : 2003 Textiles – Hand-Made NAMDHAS – Specification
    IS 4393 : 1979 Basic requirements for an abattoir
    IS 4394 : 1988 Method for evaluating the strength of homogenous vat dyestuffs
    IS 4395 : 1987 Glossary of Terms Relating to Inks and Allied Industry
    IS 4396 : 1981 Specification for Barium Nitrate for Explosive and Pyrotechnic Compositions
    IS 4397 : 1999 Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/Retainers – Specification
    IS 4398 : 1994 Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races – Specification
    IS 4399 : 1967 Specification for Nylon Fabrics for Industrial and Special Purposes
    IS 4400 : Part 7 : 1971 Methods of measurements on semiconductor devices: Part 7 Reverse blocking triode thyristors
    IS 4400 : Part 9 : Sec 1 : 1974 Methods of measurements on semiconductor devices: Part 9 Variables capacitance diodes, Sec IS 4400 : Part IX : Sec 2 : 1974 Methods of Measurements on Semiconductor Devices – Part IX : Variable Capacitance Diodes IS 4401 : 1995 Textiles – Twisted Nylon Fish-Net Twines – Specification
    IS 4402 : 1993 /ISO 1107 : 1974 Fishing Nets – Netting – Basic Terms and Definitions
    IS 4403 : 1979 Specification for AJOWAN
    IS 4404 : 1992 Cloves, Whole and Ground – Specification
    IS 4407 : 1967 Code of practice for reed walling
    IS 4408 : 1979 Sodium chloride, analytical reagent
    IS 4409 : 1973 Ferronickel
    IS 4410 : Part 1 : 1991 Glossary of terms relating to river valley projects: Part 1 Irrigation practice
    IS 4410 : Part 2 : 1967 Glossary of terms relating to river valley projects: Part 2 Project planning
    IS 4410 : Part 3 : 1988 Glossary of terms relating to river valley projects: Part 3 River and river training
    IS 4410 : Part 4 : 1982 Glossary of terms relating to river valley projects: Part 4 Drawings
    IS 4410 : Part 5 : 1982 Glossary of terms relating to river valley projects: Part 5 Canals
    IS 4410 : Part 6 : 1983 Glossary of terms relating to river valley projects: Part 6 Reservoirs
    IS 4410 : Part 7 : 1982 Glossary of terms relating to river valley projects: Part 7 Engineering geology
    IS 4410 : Part 8 : 1992 Glossary of terms relating to river valley projects: Part 8 Dams and dam section
    IS 4410 : Part 9 : 1982 Glossary of terms relating to river valley projects: Part 9 Spillways and syphons
    IS 4410 : Part 10 : 1988 Glossary of terms relating to river valley projects: Part 10 Hydro-electric Power station including water IS 4410 : Part 11 : Sec 1 : 1972 Glossary of terms relating to river valley projects Part 11 Hydrology Section 1 General terms
    IS 4410 : Part XI : Sec 2 : 1972 Glossary of Terms Relating to River Valley Projects – Part XI : Hydrology – Section 2 : Precipitation IS 4410 : Part 11 : Sec 3 : 1973 Glossary of terms relating to river valley projects: Part 11 Hydrology: Section 3: Infiltration and IS 4410 : Part XI : Sec 4 : 1973 Glossary of Terms Relating to River Valley Projects : Part XI : Hydrology – Section 4 : Hydrographs
    IS 4410 : Part 11 : Sec 5 : 1977 Glossary of terms relating to river valley projects: Part 11 Hydrology Section 5 Floods
    IS 4410 : Part 11 : Sec 6 : 1994 Glossary of Terms Relating to River Valley Projects – Part 11 : Hydrology – Section 6 : Ground IS 4410 : Part 11 : Sec 7 : 1984 Glossary of Terms Relating to River Valley Projects – Part 11 : Hydrology – Section 7 : Quality of IS 4410 : Part 12 : 1993 Glossary of terms relating to river valley projects: Part 12 Diversion works
    IS 4410 : Part 13 : 1985 Glossary of terms relating to river valley projects: Part 13 Operation, maintenance and repairs of river IS 4410 : Part XIV : Sec 1 : 1977 Glossary of Terms Relating to River Valley Projects – Part XIV : Soil Conservation and Reclamation IS 4410 : Part 14 : Sec 2 : 1977 Glossary of terms relating to river valley projects: Part 14 Soil conservation and reclamation Section IS 4410 : Part 15 : Sec 1 : 1973 Glossary of terms relating to river valley projects: Part 15 Canal structures Section 1 General terms
    IS 4410 : Part 15 : Sec 2 : 1973 Glossary of terms relating to river valley projects: Part 15 Canal structures Section 2 Transitions
    IS 4410 : Part XV : Sec 3 : 1977 Glossary of Terms Relating to River Valley Projects – Part XV : Canal Structures – Section 3 : Flumes
    IS 4410 : Part 15 : Sec 4 : 1977 Glossary of terms relating to river valley projects: Part 15 Canal structures Section 4 Regulating IS 4410 : Part 15 : Sec 5 : 1992 Glossary of terms relating to river valley projects: Part 15 Canal structures Section 5 Cross drainage IS 4410 : Part 16 : Sec 1 : 1999 Glossary of Terms Relating to River Valley Projects – Part 16 : Gates and Valves – Section 1 : Gates IS 4410 : Part 16 : Sec 2 : 1981 Glossary of terms relating to river valley projects: Part 16 Gates and valves Section 2 Valves
    IS 4410 : Part 17 : 1977 Glossary of terms relating to river valley projects: Part 17 Water requirements of crops
    IS 4410 : Part 18 : 1983 Glossary of Terms Relating to River Valley Projects – Part 18 : Energy Dissipation Devices (Stilling Basins)
    IS 4410 : Part 19 : 1996 Glossary of terms relating to river valley projects: Part 19 Grouting
    IS 4410 : Part 20 : 1983 Glossary of terms relating to river valley projects: Part 20 Tunnels
    IS 4410 : Part 21 : 1987 Glossary of terms relating to river valley projects: Part 21 Flood control
    IS 4410 : Part 22 : 1994 Glossary of terms relating to river valley projects: Part 22 Barrages & weirs
    IS 4410 : Part 23 : 1999 Glossary of Terms Relating to River Valley Projects – Part 23 : Hoists, Cranes and Other Related Terms
    IS 4411 : 1967 Code for designation of semiconductor devices
    IS 4412 : 1981 Copper wires for general engineering purposes
    IS/ISO 4412-1 : 1991 Hydraulic Fluid Power – Test Code for Determination of Airborne Noise Levels – Part 1 : Pumps
    IS/ISO 4412-2 : 1991 Hydraulic Fluid Power – Test Code for Determination of Airborne Noise Levels – Part 2 : Motors
    IS 4413 : 1981 Brass wires for general engineering purposes
    IS 4414 : 1990 Wooden Table Tops – Specification
    IS 4415 : 1974 Glossary of terms relating to wooden furniture and fixtures
    IS 4416 : 1967 Specification for Dobby Barrels
    IS 4417 : 1971 Specification for Weft Pirns for Shuttles for Pirn-Changing Automatic Cotton, Woollen and Worsted Looms
    IS 4419 : 1967 Method for determination of dimensional stability of knitted fabrics made of synthetic fibres
    IS 4420 : 1967 Methods for determination of conductivity of acqeous and organic extracts of textile materials
    IS 4422 : 1985 Specification for willow clefts for cricket bats
    IS 4423 : 1999 Hand-Sawing of Timber – Guide
    IS 4424 : 1967 Specification for timber for use in coal mines
    IS 4425 : 1967 Specification for p-Nitrotoluene o-Sulphonic Acid
    IS 4426 : 1992 Methods of sampling laboratory glassware
    IS 4427 : 1967 Grading for Groundnut Kernels for Oil Milling and for Table Use
    IS 4428 : 1967 Grading for mustard seeds for oil milling
    IS 4429 : 1967 Grading for sesame seeds for oil milling
    IS 4430 : 1979 Specification for Mould Steels
    IS 4431 : 1978 Carbon and carbon manganese free cutting steels
    IS 4432 : 1988 Case hardening steels
    IS 4433 : 1979 Method for Determination of Hardgrove Grindability Index of Coal
    IS 4434 : 1978 Code of practice for in-situ vane shear test for soils
    IS 4435 : 1967 Specification for wooden ladders and trestles
    IS 4436 : 1989 Jute Bagging for Wrapping Cotton Bales – Specification
    IS 4438 : 1967 Specification for Perforated Steel Strips (Fillets) for Take-up Rollers
    IS 4439 : 1967 Specification for Rayon Velvet
    IS 4440 : 1996 Engineering metrology – Precision Equipment – Slip Gauge Accessories
    IS 4441 : 1980 Code of practice for use of silicate type chemical resistant mortars
    IS 4442 : 1980 Code of practice for use of sulphur type chemical resistant mortars
    IS 4443 : 1980 Code of practice for use of resin type chemical resistant mortars
    IS 4444 : 1967 Specification for Bottles, Bacteriological
    IS 4445 : 1967 Specification for Filter and Filter Chamber for Blood Transfusion
    IS 4446 : Part 1 : 1986 Specification for Chlorophyll – Part 1 : Magnesium Complex
    IS 4446 : Part 2 : 1986 Specification for Chlorophyll – Part 2 : Copper Complex
    IS 4447 : 1994 Sodium Benzoate, Food Grade – Specification
    IS 4448 : 1994 Benzoic Acid, Food Grade – Specification
    IS 4449 : 1988 Alcoholic Drinks – Whiskies – Specification
    IS 4450 : 1988 Alcoholic Drinks – Brandies – Specification
    IS 4452 : 1967 Specification for Dehydrated Onion
    IS 4453 : 1980 Code of Practice for Subsurface Exploration by Pits, Trenches, Drifts and Shafts
    IS 4454 : Part 1 : 2001 Steel Wire for Mechanical Springs – Specification – Part 1 : Cold Drawn Unalloyed Steel Wire
    IS 4454 : Part 2 : 2001 Steel Wire for Mechanical Springs – Specification – Part 2 : Oil Hardened and Tempered Steel Wire
    IS 4454 : Part 4 : 2001 Steel Wire for Mechanical Springs – Specification – Part 4 : Stainless Steel Wire
    IS 4455 : 1967 Specification for Trolleys, Soiled Linen
    IS 4456 : Part I : 1967 Methods of Test for Chemical Resistant Mortars – Part I : Silicate Type and Resin Type
    IS 4456 : Part 2 : 1967 Methods of test for chemical resistant mortars: Part II Sulphur type
    IS 4457 : 1982 Specification for ceramic unglazed vitreous acid resisting tile
    IS 4458 : 1967 Specification for Screens, Bedside
    IS 4459 : 1967 Method for determination of strength of direct dyestuffs by dyeing test
    IS 4460 : Parts 1 to 3 : 1995 Gears – Spur and Helical Gears – Calculation of Load Capacity
    IS 4461 : 1998 Code of practice for joints in surface hydro-electric power stations
    IS 4462 : 1974 Specification for Contact Wire Healds for Jute Weaving
    IS 4463 : 1973 Specification for HOOKA Tobacco, Manufactured
    IS 4464 : 1985 Code of practice for presentation of drilling information and core description in foundation investigation
    IS 4465 : 1984 Specification for Metal Heald Frames for Flat Steel Healds
    IS 4467 : 1996 Caramel – Specification
    IS 4468 : Part 1 : 1997 Agricultural wheeled tractors – Rear-mounted three-point linkage: Part 1 Categoies 1, 2 3 & 4
    IS 4468 : Part 2 : 1993/ISO 730-2 : 1979 Agricultural wheeled tractors – Three-point linkage: Part 2 Category 1 N (Narrow Hitch)
    IS 4469 : 1985 Code of practice for construction of flue-curing tobacco barns
    IS 4470 : 1976 Specification for All-Metal Leasing Reeds for Warping
    IS 4471 : 1981 Method for determination of strength of naphthols (azoic coupling components) (gravimetric and volumetric methods)
    IS 4472 : Part I : 1967 Methods for Identification of the Application Classes of Dyes on Textile Materials – Part I : Cotton and Other IS 4472 : Part 2 : 1968 Methods for identification of application classes of dyes on textile materials–Wool, silk and other protein IS 4472 : Part III : 1973 Methods for Identification of Application Classes of Dyes on Textile Materials – Part III : Man-Made Fibres
    IS 4473 : 2002 Domestic Gas Ovens for Use with Liquefied Petroleum Gases — Specification
    IS 4474 : 2003 Textile Machinery – Glossary of Terms Relating to Drafting in Spinning Machinery
    IS 4475 : Part 1 : 1986 Specification for Crane-suspended Ladles for Foundries – Part 1 : Straight/Taper Sided Geared Ladles 0.25 IS 4475 : Part 2 : 1986 Specification for Crane-Suspended Ladles for Foundries: Part 2Cylindrical geared ladles 0.25 to 3.0 tonnes IS 4475 : Part 3 : 1989 Specification for Crane-Suspended Ladles for Foundries: Part 3 Straight/taper sided ladles 0.25 to 3.0 tonnes IS 4475 : Part 4 : 1988 Specification for Crane-Suspended Ladles for Foundries: Part 4 Taper sided non geared ladles 15 to 50
    IS 4477 : Part 2 : 1975 Methods of measurement of fluid flow by means of venturi meters: Part 2 Compressible fluids
    IS 4478 : 1992 Shipbuilding – Derrick rigs – Glossary of terms
    IS 4479 : 1981 Methods of measurement on magnetic tapes for sound recording and reproduction (first revision)
    IS 4480 : Part I : 1967 Specification for Magnetic Tapes for Sound Recording and Reproduction – Part I : Domestic Grade
    IS 4480 : Part 2 : 1987 Specification for Magnetic Tapes for Sound Recording and Reproduction – Part 2 : Professional Grade (IS 4481 : 1988 Specification for Duck-bill Pliers
    IS 4483 : Part 1 : 1968 Preferred panel cutout dimensions for electrical relays: Part 1 Flush mounting IDMTL relays
    IS 4484 : 1994 Shipbuilding – Electrically welded stud link anchor chains and connecting shackles and swivels – Specification
    IS 4485 : 1968 Specification for Track Spanners for Railways
    IS 4486 : 1967 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating IS 4487 : 2000 ENT Surgery Instruments – Forceps, Tonsil Artery (Birkett’s Pattern) – Specification
    IS 4488 : 1968 Specification for Forceps, Tonsil Holding (Muck’s and White’s Patterns)
    IS 4489 : 1968 Specification for Forceps, Nasal Turbinate, Luc’s
    IS 4490 : 1968 Specification for Forceps, Dilating, Trousseau’s
    IS 4491 : 1994 Steel castings for high magnetic permeability
    IS 4492 : 1968 Specification for Welded V-blocks (Diameter Range 300 to 2 000 mm)
    IS 4493 : Part I : 1979 Specification for Hollow Metallic Waveguides – Part I General Requirements and Tests
    IS 4493 : Part 2 : 1981 Specification for Hollow Metallic Waveguides – Part 2 : Ordinary Rigid Rectangular Waveguides
    IS 4493 : Part 3 : 1982 Specification for Hollow Metallic Waveguides – Part 3 : Medium Flat Rigid Rectangular Waveguides
    IS 4493 : Part 4 : 1982 Specification for Hollow Metallic Waveguides – Part 4 : Flat Rigid Rectangular Waveguides
    IS 4493 : Part V : 1982 Specification for Hollow Metallic Waveguides – Part V : Rigid Rectangular Waveguides with Circular Outside IS 4493 : Part VI : 1982 Specification for Hollow Metallic Waveguides – Part VI : Rigid Square Waveguides
    IS 4493 : Part 7 : 1983 Specification for Hollow Metallic Waveguides – Part 7 : Circular Waveguides
    IS 4494 : 1968 Specification for Tables, Overbed
    IS 4495 : 1992 Cinematography – light output of narrow gauge film projectors method of measurement
    IS 4496 : 1968 Screen luminance for the projection of 16 mm film by incandescent lamps
    IS 4497 : 1977 16 mm portable sound-and-picture cinematograph projectors
    IS 4499 : 1968 Dimensions for Depth of Holes for Studs
    IS 4500 : 1967 Specification for Pipe Wrenches, Foot Print Type
    IS 4501 : 1981 Specification for Aprons, Rubberized, Acid and Alkali Resistant
    IS 4502 : 1999 Machine Vices – Specification
    IS 4503 : 1967 Specification for Shell and Tube Type Heat Exchangers
    IS 4504 : 1968 Specification for Forceps, Peritonsillar
    IS 4505 : 1968 Sodium formaldehyde sulphoxylate
    IS 4506 : 1989 Hand Tools – Forks, General Purpose – Specification
    IS 4507 : 1978 Specification for Yacht Ropes
    IS 4508 : 1992 Open Ended Slugging Wrenches (Spanners) – Specification
    IS 4509 : 1992 Ring Slugging Wrenches (Spanners) – Specification
    IS 4511 : Part 1 : 1986 Methods of Test for Styrene-Butadiene Rubber (SBR) Latices – Part 1 : Determination of Dry Polymer Content
    IS 4511 : Part 2 : 1986 Methods of Test for Styrene-butadiene Rubber (SBR) Latices – Part 2 : Determination of Density
    IS 4511 : Part 3 : 1987 Methods of Test for Styrene-butadiene Rubber (SBR) Latices – Part 3 : Determination of Volatile Unsaturates
    IS 4511 : Part 4 : 1986 Methods of Test for Styrene-butadiene Rubber (SBR) Latices – Part 4 : Determination of Bound Styrene IS 4511 : Part 5 : 1986 Methods of Test for Styrene-butadiene Rubber (SBR) Latices – Part 5 : Determination of Soap Content
    IS 4511 : Part 6 : 1987 Methods of Test for Styrene-butadiene Rubber (SBR) Latices – Part 6 : Determination of High-speed Mechanical IS 4512 : 1978 Specification for Footwear Lasts, Wooden
    IS 4513 : 1968 Specification for Scissors, Surgical Dressing and Stitch
    IS 4514 : 1968 Specification for Forceps, Tonsil Dissecting (Waugh’s Pattern)
    IS 4515 : 2002 Stone Pitched Lining for Canals – Code of Practice
    IS 4516 : 1968 Elliptical mild steel tubes
    IS 4517 : 1986 Specification for Brushes, Welders’
    IS 4518 : Part I : 1967 Methods of test for styrene-butadiene rubbers(SBR) Part I Determination of volatile matter, total ash, organic IS 4518 : Part II : 1971 Methods of test for styrene-butadiene rubbers: Part II Determination of solvent extract and oil content
    IS 4519 : 1977 Dimensions for copper commutator bars
    IS 4520 : 1968 Specification for Forceps, Punch, Nasal (Citelli’s Antrum and Hajek’s Sphenoidal)
    IS 4521 : 2001 Wire Ropes Used in Oil Wells and Oil Well Drilling – Specification
    IS 4522 : 1986 Heat resistant alloy steel and nickel base castings
    IS 4523 : 1989 Acetoacetanilide – Specification
    IS 4524 : 1989 Acetoacet-o-chloroanilide – Specification
    IS 4525 : 1994 4-Aminoacetanilide, Technical – Specification
    IS 4526 : 1976 Specification for 2, 5-dichloroaniline
    IS 4527 : 1968 Specification for 2-Nitro-4-Chlorotoluene
    IS 4528 : 1977 Specification for 4, 4′-dinitrostilbene-2, 2′-disulphonic Acid (Disodium Salt)
    IS 4529 : 1968 Specification for Glass Tubes for Medical Thermometers
    IS 4530 : 1968 General requirements for positioning and routing of engine exhaust pipes in motor vehicles
    IS 4531 : Part 1 : 1988 Specification for Swivels – Part 1 : General Requirements
    IS 4531 : Part 2 : 1988 Specification for Swivels – Part 2 : Dimensions of Bowpiece
    IS 4531 : Part 3 : 1988 Specification for Swivels – Part 3 : Dimensions of Eye
    IS 4533 : 1995 Suction apparatus – Specification
    IS 4534 : 1980 Specification for Adapter for Terminal Devices, Artificial Limbs
    IS 4535 : 1968 Specification for Saw-grip Terminal Device for Artificial Limbs
    IS 4536 : Part 1 : 1987 Specification for Composite Bottom Stainless Steel Cooking Utensils – Part 1 : Copper Electrodeposited
    IS 4536 : Part II : 1969 Specification for Composite Bottom Stainless Steel Cooking Utensils – Part II : 3-ply Construction
    IS 4536 : Part 3 : 1987 Specification for Composite Bottom Stainless Steel Cooking Utensils – Part 3 : Copper Clad
    IS 4540 : 1968 Monocrystalline semiconductor rectifier assemblies and equipment
    IS 4541 : 1986 Glossary of Tea Terms
    IS 4542 : 1968 Colorimetric methods for determination of iron
    IS 4543 : 1977 Specification for marquenching oil
    IS 4544 : 2000 Ammonia – Code of Safety
    IS 4545 : Part 1 : 1983 Methods of measurement on receivers for television broadcast transmissions: Part 1 General considerations
    IS 4545 : Part 2 : 1983 Methods of Measurement on Receivers for Television Broadcast Transmissions – Part 2 : Tuning Properties IS 4545 : Part 3 : 1983 Methods of measurement on receivers for television broadcast transmissions: Part 3 Geometrical properties IS 4545 : Part 4 : 1983 Methods of measurement on receivers for television broadcast transmissions: Part 4 Synchronizing quality
    IS 4545 : Part 5 : 1983 Methods of measurement on receivers for television broadcast transmissions: Part 5 Sensitivity
    IS 4545 : Part 6 : 1983 Methods of measurement on receivers for television broadcast transmissions: Part 6 Selectivity and response IS 4545 : Part 7 : 1983 Methods of measurement on receivers for television broadcast transmissions: Part 7 Fidelity
    IS 4545 : Part 8 : 1983 Methods of measurement on receivers for television broadcast transmissions:Part8 Compatibility with audio IS 4545 : Part 9 : 1983 Methods of measurement on receivers for television broadcast transmissions: Part 9 Electrical and acoustic IS 4545 : Part 11 : 1992/IEC 107-06 : 1989 Methods of measurement on receivers for television broadcast transmissions: Part IS 4545 : Part 12 : 2000 /IEC 60107-5 (1999) Method of Measurement on Receivers for Television Broadcast Transmission – Part IS 4547 : 1992 Receivers for Monochrome Television Broadcast Transmissions – Specification
    IS 4548 : Part 1 : 1967 Methods of chemical analysis of copper gold brazing alloys Part 1 Analysis of gold and copper
    IS 4549 : 1968 Lifeboat compass-liquid type
    IS 4550 : 1968 Recommendation for Positioning of Magnetic Compasses in Ships
    IS 4551 : 1968 Specification for Lifeboat Crutches
    IS 4552 : Part 1 : 1993 Automotive vehicles – Portable jacks for automobiles, Part 1 Mechnical jacks – Specification
    IS 4552 : Part 2 : 1993 Automotive vehicles – Portable jacks for automobiles, Part 2 Hydraulic jacks – Specification
    IS 4553 : 1983 Specification for Leather for Cricket Ball
    IS 4554 : 1968 Specification for Terminal Devices, Ball Pein and Claw, for Artificial Limbs
    IS 4555 : 1980 Specification for Biprong Terminal Device, Draughtsman, for Artificial Limbs
    IS 4556 : 1968 Specification for Typing Finger Terminal Device for Artificial Limbs
    IS 4558 : 1995 Code of practice for under-drainage of lined canals
    IS 4559 : 1993 Single operator rectifier type dc arc welding power source
    IS 4560 : 1968 Code of safety for nitric acid
    IS 4561 : Part I : 1968 Specification for Oil Cans – Part I : Light Duty Oil Cans
    IS 4561 : Part II : 1968 Specification for Oil Cans – Part II : Conical Oil Cans
    IS 4561 : Part III : 1968 Specification for Oil Cans – Part III : Feeding Oil Cans
    IS 4561 : Part IV : 1968 Specification for Oil Cans – Part IV : Detachable Spout Oil Cans
    IS 4561 : Part V : 1968 Specification for Oil Cans – Part V : Lever Type Oil Cans
    IS 4562 : 1997 Shipbuilding – Portable Chemical Fire Extinguishers, Foam Type for Marine Use – Specification
    IS 4563 : 1987 Specification for Block Squares
    IS 4564 : 1968 Fireclay nozzles
    IS 4565 : 1968 Fireclay stoppers
    IS 4566 : 1979 Specification for Methylene Chloride (dichloromethane), Technical
    IS 4567 : 1968 Specification for Pliers Terminal Device, Quick-grip, for Artificial Limbs
    IS 4568 : 1968 Specification for Lifeboat Oars (Wood)
    IS 4569 : Part 1 : 1985 Specification for Scissors, Eye – Part 1 : Corneal
    IS 4569 : Part 2 : 1985 Specification for Scissors, Eye – Part 2 : Conjunctival, Blunt and Sharp-point Scissors
    IS 4569 : Part 3 : 1985 Specification for Scissors, eye – Part 3 : Scissors, Tenotomy
    IS 4569 : Part 4 : 1985 Specification for Scissors, Eye – Part 4 : Scissors, Enucleation
    IS 4569 : Part 5 : 1985 Specification for Scissors, Eye – Part 5 : Scissors, Spring Action, Vanna’s Pattern (Modified)
    IS 4569 : Part 6 : 1985 Specification for Scissors, Eye – Part 6 : Scissors, Iris
    IS 4570 : Part 1 : 1983 Specification for Crystal Unit Holders – Part 1 : General Requirements and Tests
    IS 4570 : Part 2 : 1999 Specification for Crystal Unit Holders – Part 2 : Metal, Solder-sealed, Two Pin Crystal Unit Holders Types IS 4570 : Part 3 : 1984 Specification for Crystal Unit Holders – Part 3 : Tube Type Crystal Unit Holders (Glass) Types AP, AR, AS, IS 4570 : Part 4 : 1999 Specification for Crystal Unit Holders – Part 4 : Metal, Solder-Sealed, Two Pin Crystal Unit Holders Types IS 4570 : Part 5 : 1999 Specification for Crystal Unit Holders – Part 5 : Metal, Solder Sealed, Two Pin Crystal Unit Holders Types IS 4570 : Part 6 : 1999 Specification for Crystal Unit Holders – Part 6 : Metal, Solder-Sealed, Two Pin Crystal Unit Holders Type IS 4570 : Part 7 : 1985 Specification for Crystal Unit Holders – Part 7 : Microminiature, Metal, Solder Seal, Two-Wire Crystal Unit IS 4570 : Part 8 : 1999 Specification for Crystal Unit Holders – Part 8 : Metal, Welded, Three Wire Crystal Unit Holders Type DK
    IS 4570 : Part 9 : 1999 Specification for Crystal Unit Holders – Part 9 : Metal, Welded, Two-Pin Crystal Unit Holders Type DN
    IS 4570 : Part 10 : 1999 – Crystal Unit Holders – Specification – Part 10 : Metal, Welded, Two-pin Crystal Unit Holders Types DP IS 4570 : Part 11 : 1999 Specification for Crystal Unit Holders – Part 11 : Metal, Welded, Two-Pin Crystal Unit Holder Type DQ
    IS 4570 : Part 12 : 1989 Specification for crystal unit holders: Part 12 Microminiature, metal, cold-welded, two-wire crystal unit holder IS 4570 : Part 13 : Sec 1 : 1993 Crystal Unit Holders – Specification – Part 13 : Quartz Crystal Unit Holder Outline for Automatic IS 4570 : Part 13 : Sec 2 : 1993 Crystal Unit Holders – Specification – Part 13 : Quartz Crystal Unit Holder Outline for Automatic IS 4570 : Part 13 : Sec 3 : 1993 Crystal Unit Holders – Specification – Part 13 : Quartz Crystal Unit Holder Outline for Automatic IS 4570 : Part 13 : Sec 4 : 1993 Crystal Unit Holders – Specification – Part 13 : Quartz Crystal Unit Holder Outline for Automatic IS 4570 : Part 13 : Sec 5 : 1993 Crystal Unit Holders – Specification – Part 13 : Quartz Crystal Unit Holder Outline for Automatic IS 4571 : 1977 Specification for Aluminium Extension Ladders for Fire Brigade use
    IS 4572 : 1992 Polyamide multifilament ropes (Hawser-laid and plaited) – Specification
    IS 4573 : 1982 Specification for Power Driven Mobile Cranes
    IS 4574 : 1989 Flourspar for use in metallurgical industries
    IS 4575 : 1983 Code for handling of fibre ropes
    IS 4576 : 1999 Liquefied Petroleum Gases – Specification
    IS 4577 : 1980 Specification for Spade-grip Terminal Device for Artificial Limbs
    IS 4578 : 1997 Lubricating oils for refrigeration machinery – Specification
    IS 4579 : 1968 Methods of measurements on television picture tubes
    IS 4580 : 1986 Specification for Brushes, Shaving
    IS 4581 : 1978 Phosphorus trichloride, pure and analytical reagent
    IS 4582 : 1992 Textiles – Women’s cardigan, knitted – Specification
    IS 4584 : 2002 Brushes, Hair – Specification
    IS 4586 : Part 1 : Sec 1 : 1987 Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components IS 4586 : Part 1 : Sec 2 : 1987 Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components IS 4586 : Part 1 : Sec 3 : 1987 Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components IS 4586 : Part 1 : Sec 4 : 1987 Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components IS 4586 : Part 1 : Sec 5 : 1987 Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components
    IS 4586 : Part 1 : Sec 6 : 1987 Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components- IS 4586 : Part 1 : Sec 7 : 1987 Dimensions of spindles and mounting arrangements for spindle operated electronic components: IS 4586 : Part 1 : Sec 8 : 1987 Dimensions of spindles and mounting arrangements for spindle operated electronic components: IS 4586 : Part 1 : Sec 9 : 1987 Dimensions of spindles and mounting arrangements for spindle operated electronic components: IS 4586 : Part 1 : Sec 10 : 1978 Dimensions of Spindles and Mounting Arrangements for Spindle Operated Electronic Components IS 4586 : Part 2 : Sec 1 : 1980 Dimensions of spindles and mounting arrangements for spindle operated electronic components: IS 4586 : Part 2 : Sec 2 : 1980 Dimensions of spindle and mounting arrangements for spindle operated electronic components: IS 4587 : 1968 Specification for Raspatories, Cleft Palate, for Plastic Surgery
    IS 4588 : 1986 Specification for Rubber, Raw, Natural
    IS 4589 : 2002 Plastic Clay and Washed Plastic Clay for Ceramic Industry – Specification
    IS 4590 : 1980 Specification for Secondary Level
    IS 4591 : 1968 Code of Practice for Installation and Maintenance of Escalators
    IS 4592 : 2002 Acceptance Conditions of Open Front Mechanical Power Presses – Testing of Accuracy
    IS 4593 : 1968 Test chart for straight-sided presses
    IS 4594 : 1968 Code of practice for design of portal and semiportal wharf cranes (electrical)
    IS 4595 : 1969 General requirements for non-sparking tools
    IS 4596 : 1968 Glossary of terms relating to oil expellers
    IS 4597 : 1968 Code of practice for finishing of wood and wood based products with nitrocellulose and cold catalysed materials
    IS 4600 : 1968 Specification for Flexible Shafts
    IS 4601 : Part 1 : 1968 Navigation lights for large sea going power driven vessels, Part 1 Positioning and screening of lights
    IS 4601 : Part 2 : 1968 Navigation lights for large sea going power driven vessels, Part 2 Oil lanterns
    IS 4602 : 1968 General requirements and testing of lifeboats for less than one hundred persons
    IS 4603 : 1991 Phenyl Ethyl Alcohol – Specification
    IS 4604 : 1975 Pattern plates for machine moulding boxes
    IS 4605 : 1981 Specification for Crepe Bandage
    IS 4606 : 1983 Steel shots for use in foundries
    IS 4609 : 1980 Specification for Pencil-holding Device for Artificial Limbs
    IS 4610 : 1968 Glass tubes for general purpose and reference thermometers
    IS 4611 : 1991 Metallic zinc powder (zinc dust)
    IS 4613 : 1993 Javelins – Specification
    IS 4614 : 1988 Specification for Hurdles
    IS 4615 : 1968 Switch socket outlets (non-interlocking type)
    IS 4616 : 1968 Specification for sheepsfoot roller
    IS 4617 : 1968 Grading for linseed for oil milling
    IS 4618 : 1968 Grading for castor seeds for oil milling
    IS 4619 : 1968 Grading for MAHUA kernels for oil milling
    IS 4620 : 1968 Grading for cottonseeds for oil milling
    IS 4621 : 1975 Specification for indicating bolts for use in public baths and Lavatories
    IS 4622 : 2003 Recommendations for Structural – Structural Design of Fixed-Wheel Gates
    IS 4623 : 2000 Recommendations for Structural Design of Radial Gates
    IS 4624 : 1978 Specification for Dehydrated Peas
    IS 4625 : 1968 Specification for Dehydrated Carrots
    IS 4626 : 1978 Specification for Dehydrated Potatoes
    IS 4627 : 1968 Specification for Dehydrated Cabbage
    IS 4628 : 1978 Specification for Dehydrated Okra (Bhindi)
    IS 4629 : 1994 Textiles – Blankets, wool khadi – Specification (Amalgamating IS 3783:1966)
    IS 4630 : 1968 Specification for Barbell Set
    IS 4631 : 1986 Code of practice for laying of epoxy resin floor toppings
    IS 4632 : 1968 Specification for Square Sliders for Stitch Regulators for Sewing Machines for Household Purposes
    IS 4633 : 1968 Specification for Fixed Metallized-paper Dielectric Capacitor for Direct Current
    IS 4634 : 1991 Methods for testing performance of batch-type concrete mixers
    IS 4635 : Part I : 1968 Method for Determination of Colour Fastness of Textile Materials to Vulcanizing – Part I : With Hot Air
    IS 4635 : Part 2 : 1968 Method for determination of colour fastness of textile materials to vulcanizing: Part 2 With sulphur monochloride
    IS 4635 : Part 3 : 1968 Method for determination of colour fastness of textile materials to vulcanizing: Part 3 With open steam
    IS 4636 : 1988 Method for determination of colour fastness of textile materials to dry-heat treatments (excluding pressing)
    IS 4637 : 1988 Method for determination of colour fastness of textile materials to steam under pressure
    IS 4638 : 1981 Seamless rectangular fish tins
    IS 4639 : 1968 Glossary of petroleum terms
    IS 4639 : Part 1 : 2000 /ISO 1998-1 : 1998 Petroleum Industry – Terminology – Part 1 : Raw Materials and Products
    IS 4639 : Part 2 : 2000 /ISO 1998-2 : 1998 Petroleum Industry – Terminology – Part 2 : Properties and Tests
    IS 4639 : Part 3 : 2000 /ISO 1998-3 : 1998 Petroleum Industry – Terminology – Part 3 : Exploration and Production
    IS 4639 : Part 4 : 2000 /ISO 1998-4 : 1998 Petroleum Industry – Terminology – Part 4 : Refining
    IS 4639 : Part 5 : 2000/ISO 1998-5 : 1998 Petroleum Industry – Terminology – Part 5 : Transport, Storage, Distribution
    IS 4639 : Part 6 : 2002/ISO 1998-6 : 2000 Petroleum Industry – Terminology – Part 6 : Meaurement
    IS 4639 : Part 7 : 2000 /ISO 1998-7 : 1998 Petroleum Industry – Terminology – Part 7 : Miscellaneous Terms
    IS 4639 : Part 99 : 2002/ISO 1998-99 : 2000 Petroleum Industry – Terminology – Part 99 : General and Index
    IS 4640 : 1993/ISO 858 : 1978 Fishing nets – Designation of netting yarns in the tex system
    IS 4641 : 1993/ISO 1530 : 1973 Fishing nets – Description and designation of knotted netting
    IS 4642 : 1968 Specification for Ball, Pebble and Tube Mills
    IS 4643 : 1984 Specification for suction wrenches for fire brigade use
    IS 4644 : 1968 Code of safety for benzene, toluene and xylene
    IS 4645 : 1993 Code of practice for storage of paper and board
    IS 4646 : Part 1 : 1968 Methods of chemical analysis of copper phosphorus brazing alloys, Part 1 Analysis for silver and copper
    IS 4646 : Part 2 : 1976 Methods of chemical analysis of copper phosphorus brazing alloys Part 2 Determination of phosphorus
    IS 4647 : 1998 Inland Vessels – Detachable Steel Ladder – Specification
    IS 4648 : 1968 Guide for Electrical Layout in Residential Buildings
    IS 4649 : 1968 Adaptors for flexible steel conduits
    IS 4650 : 1968 Specification for anvil wooden blocks
    IS 4651 : Part 1 : 1974 Code of practice for planning and design of ports and harbours: Part 1 Site investigation
    IS 4651 : Part 2 : 1989 Code of practice for planning and design of ports and harbours: Part 2 Earth pressure
    IS 4651 : Part III : 1974 Code of Practice for Planning and Design of Ports and Harbours – Part III : Loading
    IS 4651 : Part 4 : 1989 Code of practice for planning and design of ports and harbours: Part 4 General design consideration
    IS 4651 : Part 5 : 1980 Code of practice for planning and design of ports and harbours: Part 5 Layout and functional requirements
    IS 4652 : 1987 Specification for Ethyl p-hydroxybenzoate for Cosmetic Industry
    IS 4653 : 1985 Specification for Methyl p-hydroxybenzoate for Cosmetic Industry
    IS 4654 : 1993 Paraffin wax – Specification
    IS 4655 : 1968 Method for determination of iron and chromium in textiles
    IS 4656 : 1968 Specification for form vibrators for concrete
    IS 4658 : 1988 Coated paper and board (art and chromo)
    IS 4659 : 1980 Specification for Wire Rope Reel for Inland Vessels
    IS 4660 : 1993 Powered Industrial Trucks – Terminology
    IS 4661 : 1999 Glossary of terms used in paper trade and industry
    IS 4662 : 1977 Methods for sampling of starches and starch products
    IS 4663 : 1968 Specification for Permanent Rubber-based Adhesives for Footwear Industry
    IS 4664 : 1986 Pulp board
    IS 4665 : Part 1 : 1984 Portable electric motor-operated_tools: Part 1 General requirements and tests
    IS 4665 : Part 2 : 1984 Portable electric motor-operated tools:Part 2 Specific requirements for tools
    IS 4667 : Part 1 : 1968 Methods of chemical analysis of silver copper brazing alloys Part 1 Analysis for silver and copper
    IS 4667 : Part 2 : 1969 Methods of chemical analysis of silver copper brazing alloys Part 2 Determination of silver, copper and IS 4667 : Part 3 : 2001 Chemical Analysis of Silver-Copper Brazing Alloys – Part 3 : Determination of Nickel
    IS 4667 : Part 4 : 2001 Chemical Analysis of Silver-Copper Brazing Alloys – Part 4 : Determination of Silver, Copper, Cadmium IS 4668 : 1985 Specification for Ammonium Nitrate for Explosives
    IS 4669 : 1968 Methods of test for polyvinyl chloride resins
    IS 4670 : 1993 Legal metrology – Liquor measures – Specification
    IS 4671 : 1984 Expanded polystyrene for thermal insulation purposes
    IS 4672 : 1982 Specification for Grease Cups
    IS 4673 : 1968 Specification for Wick Feed Lubricators
    IS 4674 : 1975 Specification for Dressed Chicken
    IS 4675 : 1968 Specification for Light Split-hook Device for Artificial Limbs
    IS 4677 : 1968 Specification for Steering Appliance for Artificial Limbs
    IS 4679 : 1968 Specification for Spatula, Plaster, Dental, Curved and Straight
    IS 4680 : 1968 Specification for Spatula, Wax, Dental, No. 2
    IS 4681 : 1981 Method for determination of recovery from creasing of textile fabrics by measuring the angle of recovery
    IS 4682 : Part 1 : 1994 Code of practice for lining of vessels and equipment for chemical processes Part 1 Rubber lining
    IS 4682 : Part 2 : 1969 Code of practice for lining of vessels and equipment for chemical processes Part 2 Glass enamel lining
    IS 4682 : Part 3 : 1969 Code of practice for lining of vessels and equipment for chemical processes Part 3 Lead lining
    IS 4682 : Part 4 : 1998 Code of practice for lining of vessels and equipment for chemical processes Part 4 Lining with Sheet Thermoplastics
    IS 4682 : Part 5 : 1970 Code of practice for lining of vessels and equipment for chemical processes Part 5 Epoxide resin lining
    IS 4682 : Part 6 : 1970 Code of practice for lining of vessels and equipment for chemical processes Part 6 Phenolic resin lining
    IS 4682 : Part VII : 1974 Code of Practice for Lining of Vessels and Equipment for Chemical Processes – Part VII : Corrosion and IS 4682 : Part 8 : 1974 Code of practice for lining of vessels and equipment for chemical processes Part 8 Precious metal
    IS 4682 : Part IX : 1974 Code of Practice for Lining of Vessels and Equipment for Chemical Processes – Part IX : Titanium
    IS 4682 : Part 10 : 1974 Code of practice for lining of vessels and equipment for chemical processes Part 10 Brick and tile
    IS 4683 : 1968 Chilled iron shot and grit for use in foundries
    IS 4684 : 1975 Specification for Edible Groundnut Flour (Expeller Pressed)
    IS 4685 : Part 1 : 1968 Varnish bonded glass-fibre covered copper conductors: Part 1 Round wires
    IS 4686 : 1980 Specification for Typewriter Ribbon Fabric
    IS 4687 : 1995 Gaskets and Packings – Gland Packings Asbestos – Specification
    IS 4688 : 1968 Specification for Proofed Cotton Duck Gland Packing
    IS 4690 : 1968 Specification for Mooring Buoy Shackles
    IS 4691 : 1985 Degrees of protection provided by enclosure for rotating electrical machinery
    IS 4692 : 1997 Specification for Electrically Welded Studless Link Anchor Chains and Connecting Shackles
    IS 4693 : 1968 Specification for Steel Accessories for Marine Piping Systems
    IS 4695 : Part 1 : 1988 Specification for Knuckle Screw Threads – Part 1 : Thread Profiles and Nominal Dimensions
    IS 4695 : Part 2 : 1988 Specification for Knuckle Screw Threads – Part 2 : Deviations and Tolerances
    IS 4696 : Part I : 1976 Dimensions for saw tooth threads Part I Basic and design profiles
    IS 4696 : Part II : 1976 Dimensions for saw tooth threads Part II Pitch diameter combinations
    IS 4696 : Part III : 1976 Dimensions for saw tooth threads Part III Basic dimensions
    IS 4696 : Part IV : 1980 Dimensions for saw tooth threads Part IV Tolerancing system
    IS 4697 : 1968 Methods of measurements on Geiger Muller counter tubes
    IS 4698 : 1968 Code of practice for seaworthy packing of unmanufactured cigarette type tobacco
    IS 4699 : 1984 Refined secondary zinc
    IS 4700 : 1968 Quality tolerances for water for fermentation industry
    IS 4701 : 1982 Code of practice for earthwork on canals
    IS 4703 : 1968 Methods of chemical analysis of silver-manganese brazing alloys
    IS 4704 : 1985 Specification for Silver-tin Dental Amalgam Alloy
    IS 4705 : 1985 Specification for Dental Mercury
    IS 4706 : Part I : 1978 Methods of Test for Edible Starches and Starch Products – Part I : Physical Methods
    IS 4706 : Part II : 1978 Methods of Test for Edible Starches and Starch Products – Part II : Chemical Methods
    IS 4707 : Part 1 : 2001 Classification of Cosmetics Raw Materials and Adjuncts – Part 1 : Dyes, Colours and Pigments
    IS 4707 : Part 2 : 2001 Classification of Cosmetics Raw Materials and Adjuncts – Part 2 : List of Raw Materials Generally Not Recognized IS 4708 : 1968 Specification for Urine Glass, Conical
    IS 4709 : 1968 Specification for Flavoured Milk
    IS 4711 : 1974 Methods for sampling of steel pipes, tubes and fittings
    IS 4712 : 1984 Forged steel,socket-welding fittings
    IS 4714 : 1985 Specification for Scalers, Dental, no. SC 1/2, 3/4 and 5/6
    IS 4715 : 1968 Specification for Excavators, Dental, No. EX 1/2, 3/4, 5/6, 7/8, 9/10, 11/12 and 13/14
    IS 4716 : 1993/ISO 7492 : 1983 Dental instruments – Dental probes
    IS 4717 : 1980 Specification for Zinc Oxide Self-adhesive Plaster
    IS 4719 : 1984 Specification for Wire-woven Rayon Fabric for Aerospace Purposes
    IS 4720 : 1982 Code of Practice for Ventilation of Surface Hydel Power Stations
    IS 4721 : 2000 Code of Practice for Drainage and Dewatering of Surface/Underground Hydroelectric Power Station
    IS 4722 : 2001 Rotating Electrical Machines – Specification
    IS 4723 : 1978 Specification for Egg Powder
    IS 4726 : 1984 Specification for Light Weight Nylon Fabric for Parachutes
    IS 4727 : 1968 Specification for Nylon Webbing for Aeronautical Purposes
    IS 4728 : 1975 Terminal Markings and Direction of Rotation for Rotating Electrical Machinery
    IS 4730 : 1994 Methods for determination of density of liquids
    IS 4731 : 1968 Guide for Preparation of Manuscript of an Article in a Learned Periodical
    IS 4732 : 1968 Specification for Rivets for Shipbuilding
    IS 4735 : 1968 Specification for Arm Shaft Cams for Sewing Machines for Household Purposes
    IS 4736 : 1986 Specification for Hot-dip Zinc Coatings on Mild Steel Tubes
    IS 4737 : 1982 Chromite for chemical industries
    IS 4738 : 1993 Bandage, Plaster of Paris – Specification
    IS 4739 : 1986 Specification for Zinc Oxide Elastic Self-adhesive Bandage
    IS 4740 : 1979 Code of Practice for Packaging of Steel Tubes
    IS 4741 : 1968 Specification for Fasteners (Four Pieces)
    IS 4743 : 1968 Specification for Settling Tanks for Ghee (Stainless Steel)
    IS 4744 : 1991 Textiles – Packaging of jute products in rolls – Specification
    IS 4746 : 1968 Code for transport of dogs and cats by rail, road and air
    IS 4747 : 1986 Pads for rubber stamps
    IS 4748 : 1988 Methods for Estimating Average Grain Size of Metals
    IS 4749 : 1974 Method for Calculation of Bulk Quantities of Industrial Aromatic Hydrocarbons
    IS 4750 : 1996 Sorbitol Powder, Food Grade – Specification
    IS 4751 : 1994 Potassium Metabisulphite, Food Grade – Specification
    IS 4752 : 1994 Sodium Metabisulphite, Food Grade – Specification
    IS 4753 : 1996 Potassium Nitrate, Food Grade – Specification
    IS 4754 : 1968 Specification for Staining Troughs and Jar
    IS 4755 : 1987 Reference zero for the calibration of puretone air conduction audiometers
    IS 4756 : 1978 Safety code for tunneling work
    IS 4757 : 1980 Specification for Wrapped Bushes
    IS 4758 : 1968 Methods of Measurement of Noise Emitted by Machines
    IS 4759 : 1996 Hot-dip zinc coatings on structural steel and other allied products
    IS 4760 : 2002 Domestic Cooking Ranges Including Grillers for Use with Liquefied Petroleum Gases – Specification
    IS 4761 : 1968 Specification for Unsupported PVC Rainwear
    IS 4762 : 1984 Specification for Worm Drive Hose Clamps for General Purposes
    IS 4763 : 1982 Manganese ore for production of ferromanganese
    IS 4765 : 1975 Specification for Neem Kernel Oil and Depulped Neem Seed Oil
    IS 4766 : 1982 Specification for Thiram Water Dispersible Powders
    IS 4768 : 1981 Specification for Stainless Steel Buckets
    IS 4769 : 1968 Specification for Trolley, Dressing
    IS 4770 : 1991 Rubber Gloves – Electrical Purposes – Specification
    IS 4771 : 1985 Abrasion-resistant iron castings
    IS 4772 : 1983 Code of practice for construction of sugar godowns
    IS 4773 : 2002/ISO 113 : 1994 Rolling Bearings — Plummer Blocks Housings — Boundary Dimensions
    IS 4774 : Part I : 1982 Specification for Thin-walled Half Bearing – Part I : Plain Bearing
    IS 4774 : Part II : 1982 Specification for Thin-walled Half Bearings – Part II : Flanged Bearing
    IS 4775 : 1976 Specification for Picking Sticks for Automatic and Underpick Looms
    IS 4776 : Part I : 1977 Specification for Troughed Belt Conveyors – Part I : Troughed Belt Conveyors for Surface Installation
    IS 4776 : Part II : 1977 Specification for Troughed Belt Conveyors – Part II : Troughed Belt Conveyors for Underground Installation
    IS 4777 : 1968 Performance tests for protection schemes used in protection of light gauge steel against corrosion
    IS 4778 : 1982 Specification for Cotton Laces for Footwear
    IS 4779 : 1985 Specification for Leather Sole and Edge Wax Polishers
    IS 4780 : 1978 Specification for Pomfret, Fresh
    IS 4783 : 1982 Specification for Thiram Seed Dressing Formulations
    IS 4784 : 1968 Specification for Low Pressure Regulators for Use with Butane Gas
    IS 4785 : 1968 Specification for Low Pressure Regulators for Use with Propane gas
    IS 4786 : 1968 Specification for Variable High Pressure Regulators for Use with Liquefied Petroleum Gases
    IS 4787 : 1968 Specification for Table, Examination
    IS 4788 : 1986 Specification for Knife, Eye, Capsulotomy Ziegler’s Pattern (Modified)
    IS 4789 : 1986 Specification for Knife, Eye, Cataract, Graefe’s Pattern (Modified)
    IS 4790 : 1989 Eye Surgery Instruments – Knife, Corneal Splitting, Lang’s and Tooke’s Pattern (Modified) – Specification
    IS 4791 : 1968 Glossary of mining terms (drainage)
    IS 4792 : 1968 Glossary of mining terms (ventilation)
    IS 4793 : 1997 Whole Pomfret – Frozen – Specification
    IS 4794 : Part 1 : 1968 Push-button switches: Part 1 General requirements and tests
    IS 4794 : Part 2 : 1986 Push button switches: Part 2 Push button switches, Type 1
    IS 4795 : Part I : 1968 Specification for Holders for Indicator Lamps for Electronic and Telecommunication Equipment – Part I : IS 4795 : Part 2 : 1978 Specification for Holders for Indicator Lamps for Electronic and Telecommunication Equipment – Part 2 IS 4798 : 1968 Specification for Safety Pins
    IS 4799 : 1985 Dental casting gold alloys, non-porcelain bonding
    IS 4801 : 1980 Specification for Chemically-Bonded Magnesite-Chrome Refractories for Roof Lining
    IS 4802 : 1988 Method for determination of colour fastness of textile materials to dry-cleaning
    IS 4803 : 1985 Method for Determination of Colour Fastness of Textile Materials to Chlorinated Water (Swimming-Bath Water)
    IS 4804 : Part I : 1968 Specification for Resistance Welding Equipment – Part I : Single-phase Transformers
    IS 4804 : Part II : 1968 Specification for Resistance Welding Equipment – Part II : Single-Phase Rocker-arm Spot Welding Machines
    IS 4804 : Part 3 : 1969 Resistance welding equipment: Part 3 Single phase spot and projection welding machines
    IS 4804 : Part IV : 1973 Specification for Resistance Welding Equipment – Part IV : Single Phase Stationary, Press Type Roll-spot IS 4805 : 1978 Guide for Construction of Brick Kiln
    IS 4806 : 1968 Specification for Heat Coil Pliers
    IS 4807 : 1968 Methods of Testing Viscose Rayon Staple Fibres
    IS 4808 : 1982 Specification for Pyrethrum Emulsifiable Concentrates
    IS 4809 : 1968 Specification for Cotton-Knitted String Vests
    IS 4810 : 1968 Specification for Fumigation Sheets and Covers, Rubberized
    IS 4811 : 1992 Cinnamon Whole – Specification
    IS 4812 : 1996 Silica refractories for coke oven
    IS 4813 : 1980 Chemically-bonded chrome-magnesite refractories for general purposes
    IS 4814 : 1980 Specification for Chemically-Bonded Magnesite-Chrome Refractories for General Purposes
    IS 4815 : 1982 Specification for Self-Cancelling Direction Indicator Switches for Automobiles
    IS 4816 : 1987 Specification for Permanent Magnetic Chucks
    IS 4818 : 1996 Sorbic Acid, Food Grade – Specification
    IS 4819 : 1968 Specification for Thin Vulcanized Fibre Sheet (Including Leatheroid) for Electrical Purposes
    IS 4820 : 1968 Vulcanized fibre sheets for electrical purposes – Specificaion
    IS 4821 : 1968 Cable glands and cable sealing boxes for use in mines
    IS 4822 : 1981 Specification for Brass Cooking Utensils
    IS 4824 : 1973 Bead wire for tyres
    IS 4825 : 1982 Specification for Liquid-in-Glass Solid-Stem Reference Thermometers
    IS 4826 : 1979 – Specification for Hot-Dipped Galvanized Coatings on Round Steel Wires
    IS 4830 : 1979 Specification for Ammonium Phosphate Sulphate, Granular
    IS 4831 : 1968 Recommendation on units and symbols for refrigeration
    IS 4832 : Part 1 : 1969 Specification for chemical resistant mortars: Part I Silicate type
    IS 4832 : Part II : 1969 Specification for Chemical Resistant Mortars – Part II : Resin type
    IS 4832 : Part 3 : 1968 Specification for chemical resistant mortars: Part III Sulphur type
    IS 4833 : 1993 Methods for Field Testing of Preservatives in Wood
    IS 4834 : 1968 Specification for veneered wood boards for packing cases
    IS 4835 : 1979 Specification for Polyvinyl Acetate Dispersion Based Adhesives for Wood
    IS 4837 : 1990 School Furniture, Classroom Chairs and Tables – Recommendations
    IS 4838 : 1990 Anthropometric dimensions for school children age group 5-17 years
    IS 4839 : Part 1 : 1992 Maintenance of canals – Code of practice : Part 1 Unlined canals
    IS 4839 : Part 2 : 1992 Maintenance of canals – Code of practice : Part 2 Lined canals
    IS 4839 : Part 3 : 1992 Code of Practice for Maintenance of Canals – Part 3 : Canal Structures, Drains, Outlets, Jungle, Clearance, IS 4840 : 1984 Method for determination of flow rate of metal powders for powder metallurgical purposes
    IS 4841 : 1982 Method for determination of density of sintered metallic materials
    IS 4842 : 1982 Method for transverse testing of hardmetals
    IS 4843 : 1968 Code for designation of ferrous castings
    IS 4844 : 1968 Method of sampling and preparation of asbestos fibre for laboratory test purposes
    IS 4845 : 1968 Definitions and terminology relating to hydraulic cement
    IS 4846 : 1968 Sodium potassium tartrate (Rochelle salt)
    IS 4847 : 1979 Copper salts for electroplating
    IS 4848 : 1981 Method for Determination of Apparent Density of Free Flowing Powders for Powder Metallurgical Purposes
    IS 4849 : 1992 Meteorology – Rain measures – Specification
    IS 4851 : 1987 Proforma for Estimating Unit Rate of Concrete Used in Mechanized Construction oF River Valley Projects
    IS 4852 : 1987 Proforma for Estimating Unit Rate of Random Rubble Masonry Used in Construction of River Valley Projects
    IS 4853 : 1982 Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes
    IS 4854 : Part 1 : 1969 Glossary of terms for valves and their parts: Part 1 Screw down stop check and gate valve and their parts
    IS 4854 : Part II : 1968 Glossary of Terms for Valves and Their Parts – Part II : Plug Valves and Cocks and Their Parts
    IS 4854 : Part 3 : 1974 Glossary of terms for valves and their parts: Part 3 Butterfly valves
    IS 4856 : 1968 Specification for New Jute Woolpack
    IS 4857 : 1991/ISO 3927 : 1985 Metallic powders,excluding powders for hardmetals – Determination of compactibility (compressibility) IS 4858 : 1968 Specification for velocity rods
    IS 4859 : 1968 Specification for high strength aircraft plywood
    IS 4860 : 1968 Specification for acid-resistant bricks
    IS 4861 : 1984 Specification for dry powder for fighting fires in burning metals
    IS 4862 : Part 1 : 1986 Specification for portable fire extinguishers for aircraft : Part 1 Halon 1211 Type
    IS 4863 : 1968 Glossary of mining terms (drilling and blasting)
    IS 4864 to IS 4870 : 1968 Specification for Shell Flanges for Vessels and Equipment
    IS 4871 : 1968 Method for determination of lint and trash content of cotton by means of mechanical – pneumatic machines
    IS 4873 : 1993 Method for laboratory testing of wood preservatives against fungi
    IS 4875 : 1975 Specification for Edible Groundnut Flour (Solvent Extracted)
    IS 4876 : 1986 Specification for Edible Cottonseed Flour (Solvent Extracted)
    IS 4877 : 1968 Guide for preparation of estimate for river valley projects.
    IS 4878 : 1986 Byelaws for construction of cinema buildings
    IS 4879 : 1968 Method of sub-division of gross sample of powder used for determination of particle size
    IS 4880 : Part 1 : 1987 Code of practice for design of tunnels conveying water: Part 1 General design
    IS 4880 : Part 2 : 1976 Code of practice for design of tunnels conveying water: Part 2 Geometric design
    IS 4880 : Part 3 : 1976 Code of practice for design of tunnels conveying water: Part 3 Hydraulic design
    IS 4880 : Part 4 : 1971 Code of practice for design of tunnels conveying water: Part 4 Structural design of concrete lining in rock
    IS 4880 : Part V : 1972 Code of Practice for Design of Tunnels Conveying Water – Part V : Structural Design of Concrete Lining IS 4880 : Part 6 : 1971 Code of practice for design of tunnels conveying water: Part 6 Tunnel support
    IS 4880 : Part 7 : 1975 Code of practice for design of tunnels conveying water: Part 7 Structural design of steel lining
    IS 4881 : 1968 Code of practice for design of shipboard mechanical ventilation trunking
    IS 4882 : 1979 Specification for Low Carbon Steel Wire for Rivets for Use in Bearing Industry
    IS 4883 : 1980 Specification for Khoa
    IS 4884 : 1968 Specification for Sterilized Cream
    IS 4885 : 1988 Specification for sewer bricks
    IS 4886 : 1991 Code of practice for fire safety of industrial buildings: Tea factories
    IS 4887 : 1980 Specification for Petroleum Jelly for Cosmetic Industry
    IS 4888 : Part 1 : 2002/ISO 8489-2 : 1995 Textile Machinery and Accessories – Cones for Cross Winding – Part 1 : Dimensions, IS 4888 : Part 2 : 2002/ISO 8489-3 : 1995 Textile Machinery and Accessories – Cones for Cross Winding – Part 2 : Dimension, IS 4888 : Part 3 : 2002 /ISO 8489-5 : 1995 Textile Machinery and Accessories – Cones for Cross Winding – Part 3 : Dimensions, IS 4888 : Part IV : 1982 Specification for Cones for Yarn Winding – Part IV : Half Angle of the Cone 915′
    IS 4889 : 1968 Methods of Determination of Efficiency of Rotating Electrical Machines
    IS 4890 : 1968 Methods for Measurement of Suspended Sediment in Open Channels
    IS 4891 : 1988 Specification for preferred cut sizes of structural timber
    IS 4892 : 1987 Specification for Synthetic Rubber Aprons (Reinforced) for Drafting Systems
    IS 4894 : 1987 Centrifugal fans
    IS 4895 : 1985 Specification for teak logs
    IS 4896 : 1992 One percent chromium steel castings for resistance to abrasion
    IS 4897 : 1994 Deviations on untoleranced dimensions and mass of steel castings
    IS 4898 : 1989 Steel Castings for Case Carburizing – Specification
    IS 4899 : 1991 Ferritic and martensitic steel casting for use at low temperature
    IS 4900 : Parts 1 to 3 : 1984 Specification for Jute Carpet Backing Fabric
    IS 4902 : 1981 Method for determination of correct invoice weight of all wool materials
    IS 4904 : 1990 Calibration blocks for use in ultrasonic non-destructive testing
    IS 4905 : 1968 Methods for random sampling
    IS 4906 : 1968 Code of safety for radiochemical laboratory
    IS 4907 : 1968 Methods of testing timber connectors
    IS 4908 : 1968 Glossary of terms used in lac industry
    IS 4909 : 1990 Card and Gill Pins for Use in Jute Industry – Specification
    IS 4910 : Part 1 : 1989 Methods of Test for Tyre Yarns, Cords and Tyre Cord Warpsheets Made from Man-made Fibres – Part 1 IS 4910 : Part 2 : 1989 Tyre yarns, cords and tyre cord warpsheets made from man-made fibres – Method of test Part 2 Linear IS 4910 : Part 3 : 1989 Tyre Yarns, Cords and Tyre Cord Warpsheets Made from Man-Made Fibres – Methods of Test – Part 3 : IS 4910 : Part 4 : 1989 Tyre yarns, cords and tyre cord warpsheets made from man-made fibres – Method of test part 4 Dip pick IS 4910 : Part 5 : 1989 Tyre yarns, cords and tyre cord warpsheets made from man-made fibres -Method of test Part 5 Heat shrinkage IS 4910 : Part 6 : 1989 Tyre yarns, cords and tyre cord warpsheets made from man-made fibres – Method of test Part 6 Wet contraction IS 4910 : Part 7 : 1989 Methods of Test for Tyre Yarns, Cords and Tyre Cord Warpsheets Made from Man-Made Fibres – Part 7 IS 4910 : Part 8 : 1989 Tyre yarns, cords and tyre cord warpsheets made from man-made fibres – Method of test Part 8 Thickness
    IS 4910 : Part IX : 1978 Methods of test for tyre yarns, cords and tyre cord fabrics made from man-made fibres : Part IX Sampling IS 4910 : Part 10 : 1989 Methods of Test for Tyre Yarns, Cords and Tyre Cord Warpsheets Made from Man-Made Fibres – Part IS 4910 : Part 11 : 1989 Methods of Test for Tyre Yarns, Cords and Tyre Cord Warpsheets Made from Man-Made Fibres – Part IS 4910 : Part XII : 1981 Methods of test for tyre yarns, cords and tyre cord fabrics made from man-made fibres : Part XII Sampling IS 4910 : Part 13 : 1989 Methods of Test for Tyre Yarns, Cords and Tyre Cord Warpsheets made From Man-Made Fibres – Part IS 4911 : 1986 Glossary of terms relating to bituminous waterproofing and damp-proofing of buildings
    IS 4912 : 1978 Safety Requirements for Floor and Wall Openings, Railings and Toe Boards
    IS 4913 : 1968 Code of Practice for Selection, Installation and Maintenance of Timber Doors and Windows
    IS 4914 : 1983 Specification for Tap Wrenches, Adjustable
    IS 4915 : 1968 Specification for Welders’ Chipping Hammer
    IS 4916 : 1968 Methods of test for bicycle saddles
    IS 4918 : 1981 Specification for Hard Metal (Carbide) Wire, Bar and Tube Drawing Dies
    IS 4919 : 1981 Glossary of terms applicable to landscape and horticulture work
    IS 4920 : 1968 Glossary of terms applicable to roof coverings
    IS 4921 : 1968 Specification for Extension Bars
    IS 4922 : 1968 Seamless steel tubes (suitable for welding) for aircraft purposes
    IS 4923 : 1997 Hollow steel sections for structural use
    IS 4924 : Part 1 : 1968 Method of test for nail jointed timber trusses: Part I Destructive test
    IS 4924 : Part II : 1968 Method of Test for Nail-jointed Timber Trusses – Part II : Proof Test
    IS 4925 : 1968 Specification for concrete batching and mixing plant
    IS 4926 : 2003 Ready-Mixed Concrete – Code of Practice
    IS 4927 : 1992 Unlined Flax Canvas Hose for Fire Fighting – Specification
    IS 4928 : 1986 Specification for delivery valve for centrifugal fire pump outlets
    IS 4929 : 1978 Specification for Dichlorvos, Technical
    IS 4930 : 1985 Specification for Axle Assembly for Pneumatic-wheeled Animal-drawn Vehicles
    IS 4931 : 1995 Agricultural tractors – Rear mounted power take off Types 1, 2 and 3
    IS 4935 : 1968 Specification for Synthetic Syrups
    IS 4936 : 1968 Specification for Fruit Squashes
    IS 4938 : 1968 Specification for Insulated Stainless Steel Milk Storage Tanks, Vertical Type
    IS 4941 : 1994 Extracted Honey – Specification
    IS 4943 : 1968 Assessment of butt and fillet fusion welds in steel sheet, plate and pipe
    IS 4945 : Part I : 1968 Specification for Cotton Twines for Fish Nets – Part I : Twines for Gill Nets
    IS 4945 : Part II : 1968 Specification for Cotton Twines for Fish Nets – Part II : Twines for Trawl Nets
    IS 4946 : 1968 Method for evaluation of strength and shade of naphthol
    IS 4947 : 1985 Specification for gas cartridges for use in fire extinguishers
    IS 4948 : 2002 Welded Steel Wire Fabric for General use – Specification
    IS 4950 : 1968 Specification for Bacon Rashers, Canned
    IS 4951 : 1975 Specification for Ham, Canned
    IS 4952 : 1968 Methods for sampling of cotton bales, slivers and rovings
    IS 4953 : 1989 Specification for wooden handles for hand hammers
    IS 4954 : 1968 Recommendations for noise abatement in town planning
    IS 4955 : 2001 Household Laundry Detergent Powders – Specification
    IS 4956 : 2002 Synthetic Detergent for Industrial Purposes – Specification
    IS 4957 : 1968 Specification for Mantle Holders, Nozzle Type
    IS 4958 : 1968 Specification for Phosphamidon, Technical
    IS 4959 : 1968 Specification for Raspatory, Nasal, Howarth’s
    IS 4960 : 1968 Specification for Universal and Elongated Type V-Blocks
    IS 4961 : 1968 Determination of particle size of powders by air elutriatioin methods
    IS 4962 : 1968 Specification for wooden side sliding doors
    IS 4963 : 1987 Recommendations for Buildings and Facilities for the Physically Handicapped
    IS 4964 : 1991 Textiles – Vest, Cotton, Plain Knitted – Specification
    IS 4965 : 1991 Textiles – Vests, cotton, interlock-knitted – Specification
    IS 4966 : Part 1 : 1968 Specification for Gauges for Serrations – Part 1 : For Gauging External Serrations
    IS 4966 : Part II : 1969 Specification for Gauges for Serrations – Part II : For Gauging Internal Serrations
    IS 4967 : 1968 Recommendations for seismic instrumentation for river valley projects
    IS 4968 : Part 1 : 1976 Method for subsurface sounding for soils: Part 1 Dynamic method using 50 mm cone without betonite slurry
    IS 4968 : Part II : 1976 Method for Subsurface Sounding for Soils – Part II : Dynamic Method Using Cone and Bentonite Slurry
    IS 4968 : Part 3 : 1976 Method for subsurface sounding for soils: Part 3 Static cone penetration test
    IS 4970 : 1973 Key for identification of commercial timbers
    IS 4971 : 1968 Recommendations for selection of industrial floor finishes
    IS 4972 : 1968 Resistance spot welding electrodes
    IS 4973 : 1968 Specification for Badminton Woollen Balls
    IS 4975 : 1986 Specification for Elevators, Dental, No. 1, 2 and 3
    IS 4976 : 1987 Specification for Forceps Extraction, Dental, Upper Anteriors, No. 1 and 2
    IS 4977 : 1968 Specification for Forceps, Extraction, Dental, Lower Molar, Hawk’s Bill, No. 1
    IS 4978 : 1985 Specification for Forceps, Eye, Fixation (Toothed)
    IS 4979 : 1993 Table-tennis Table – Specification
    IS 4980 : 1968 Specification for Clubs, Indian
    IS 4981 : 1984 Guide pins for foundry pattern plates
    IS 4982 : 1984 Closing pins for foundry moulding boxes
    IS 4983 : 1968 Code of Practice for Design and Construction of Nailed Laminated Timber Beams
    IS 4984 : 1995 Specification for high density polyethylene pipes for potable water supplies
    IS 4985 : 2000 Unplasticized PVC Pipes for Potable Water Supplies – Specification
    IS 4986 : 2002 Installation of Raingauge (Non-Recording Type) and Measurement of Rain – Code of Practice
    IS 4987 : 1994 Recommendations for establishing net work of raingauge stations
    IS 4988 : Part 1 : 1969 Glossary of terms and classification of earth moving machinery:Part 1 General terms
    IS 4988 : Part 2 : 1968 Glossary of terms and classification of earth moving machinery: Part 2 Dozers
    IS 4988 : Part 3 : 1968 Glossary of terms and classification of earth moving machinery: Part 3 Motor and towed scrappers
    IS 4988 : Part 4 : 1968 Glossary of terms and classification of earth moving machinery: Part 4 Excavators
    IS 4988 : Part 5 : 1968 Glossary of terms and classification of earth moving machinery: Part 5 Motor graders
    IS 4989 : Part 1 : 1985 Specification for foam concentrate (compound) for producing mechanical foam for fire fighting:Part I Protein IS 4989 : Part 2 : 1984 Specification for Foam Concentrate for Producing Mechanical Foam for Fire Fighting – Part 2 : Aqueous IS 4989 : Part 3 : 1987 Specification for foam concentrate (compound) for producing foam for fire fighting: Part 3 Fluoro protein IS 4990 : 1993 Specification for plywood for concrete shuttering work
    IS 4991 : 1968 Criteria for blast resistant design of structrues for explosions above ground
    IS 4992 : 1975 Specification for door handles for mortice lock (vertical type)
    IS 4993 : 1983 Glossary of terms relating to modular co-ordination
    IS 4994 : 1968 Specification for Forceps, Redressing, Walsham’s, Right, Left and Straightening
    IS 4995 : Part 1 : 1974 Criteria for design of reinforced concrete bins for storage of granular and powdery materials: Part 1 General IS 4995 : Part II : 1974 Criteria for Design of Reinforced Concrete Bins for Storage of Granular and Powdery Materials – Part II IS 4996 : 1984 Specification for reinforced concrete fence posts
    IS 4997 : 1968 Criteria for design of hydraulic jump type stilling basins with horizontal and sloping apron
    IS 4998 : Part 1 : 1992 Criteria for design of reinforced concrete chimneys: Part 1 Assessment of loads
    IS 4999 : 1991 Recommendations for grouting of pervious soils
    IS 5000 : OD47 : 1986 Dimensions of Semiconductor Device Outline OD 47
    IS 5000 : OD33 : 1981 Dimensions of Semiconductor Devices Device Outline OD 33
    IS 5000 : OD34 : 1981 Dimensions of Semiconductor Devices Device Outline OD34
    IS 5000 : OD35 : 1981 Dimensions of Semiconductor Devices Device Outline OD27
    IS 5000 : OD37 : 1982 Dimensions of Semiconductor Devices Device Outline OD37
    IS 5000 : OD38 : 1984 Dimensions of Semiconductor Devices Device Outline OD38
    IS 5000 : OD40 : 1986 Dimensions of Semiconductor Devices Device Outline OD 40
    IS 5000 : OD43 : 1986 Dimensions of Semiconductor Devices Device Outline OD 43
    IS 5000 : OD36 : 1981 Dimension of Semiconductor Devices Device Outline 36
    IS 5000 : OD28 : 1978 Dimensions of Semiconductor Devices Device Outline OD 28
    IS 5000 : OD46 : 1986 Dimensions of Semiconductor Devices Device Outline OD 46
    IS 5000 : OD42 : 1986 Dimensions of Semiconductor Devices Device Outline OD 42
    IS 5000 : OD 1 : 1969 Dimensions of Semiconductor Devices Device Outline OD1
    IS 5000 : OD 29 : 1979 Dimensions of Semiconductor Devices Device Outline OD 29
    IS 5000 : OD 31 : 1981 Dimensions of Semiconductor Devices Device Outline OD31
    IS 5000 : OD 32 : 1981 Dimensions of Semiconductor Devices Device Outline OD32
    IS 5000 : OD 39 : 1986 Dimensions of Semiconductor Devices Device Outline OD 39
    IS 5000 : OD 41 : 1986 Dimensions of Semiconductor Devices Device Outline OD 41
    IS 5000 : OD 5 : 1969 Dimensions of Semiconductor Device Outline OD5 Devices
    IS 5000 : OD45 : 1986 Dimensions of Semiconductor Devices Device Outline OD 45
    IS 5000 : OD15 : 1973 Dimensions of Semiconductor Devices Device Outline OD15
    IS 5000 : OD7 : 1969 Dimensions of Semiconductor Devices Device Outline OD7
    IS 5000 : OD9 : 1986 Dimensions of Semiconductor Devices Device Outline OD9
    IS 5000 : OD10 : 1971 Dimensions of Semiconductor Devices Device Outline OD10
    IS 5000 : OD11 : 1971 Dimensions of Semiconductor Devices Device Outline OD11
    IS 5000 : OD4 : 1969 Dimensions of Semiconductor Devices Device Outline OD4
    IS 5000 : OD44 : 1986 Dimensions of Semiconductor Devices Device Outline OD44
    IS 5000 : OD27 : 1978 Dimensions of Semiconductor Device Outline OD 27
    IS 5000 : OD12 : 1971 Dimensions of Semiconductor Device Outline OD 12
    IS 5000 : OD13 : 1971 Dimensions of Semiconductor Devices Device Outline OD13
    IS 5000 : OD6 : 1969 Dimensions of Semiconductor Devices Device Outline OD6
    IS 5000 : OD14 : 1971 Dimensions of Semiconductor Devices Device Outline OD14
    IS 5000 : OD16 : 1973 Dimensions of Semiconductor Devices Device Outline OD16
    IS 5000 : OD20 : 1978 Dimensions of Semiconductor Devices Device Outline OD 20
    IS 5000 : OD26 : 1978 Dimensions of Semiconductor Device Outline OD 26
    IS 5000 : OD25 : 1978 Dimensions of Semiconductor Device Outline OD 25
    IS 5000 : OD18 : 1974 Dimensions of Semiconductor Devices Device Outline OD18
    IS 5000 : OD19 : 1974 Dimensions of Semiconductor Devices Device Outline OD19
    IS 5000 : OD23 : 1978 Dimensions of Semiconductor Device Outline OD 23
    IS 5000 : OD17 : 1974 Dimensions of Semiconductor Devices Device Outline OD17
    IS 5000 : OD21 : 1979 Dimensions of Semiconductor Device Outline OD 21
    IS 5000 : OD 8 : 1969 Dimensions of Semiconductor Devices – Device Outline OD8
    IS 5001 : Part 1 : 1969 Guide for Preparation of Drawings of Semiconductor Devices
    IS 5001 : Part 2 : 1973 Guide for preparation of drawings of semiconductor devices and integrated circuits: Part 2 Integrated circuits
    IS 5002 : 1969 Method for determination of sample size to estimate the average quality of a lot or process
    IS 5003 : 1968 Cadmium oxide for electroplating
    IS 5004 : 1968 Specification for Spoons, Cutting Dental, No. 1/2, 3/4 and 5/6
    IS 5005 : 1968 Specification for Burnisher, Dental, No. Brn 1/2
    IS 5006 : 1968 Specification for Battery Terminal Pliers
    IS 5007 : 1988 Dimensions for hand pallet trucks
    IS 5008 : Part 1 : 1987 Data Sheet for Industrial Towing Trucks – Part 1 : I.C. Engine Powered
    IS 5009 : 1968 Specification for Buchner Funnels
    IS 5011 : 1968 Gooch crucibles
    IS 5012 : 1987 Specification for Cellulose Film
    IS 5015 : 1969 Specification for Knife-terminal Device Artificial Limbs
    IS 5017 : 1968 Specification for Carvers, Dental, No. Car 1/2, 3/4 and 5/6
    IS 5022 : 1989 Sterilizers, instruments (table model)
    IS 5023 : 2003 Dental Units
    IS 5024 : 1968 Specification for Buffalo-butt Leather for Knee Bushings
    IS 5026 : 1987 General requirements and tests for radio frequency cables
    IS 5027 : 1969 Method of measurement of current noise generated in fixed resistors
    IS 5028 : 1969 Glossary of mining terms (planning and surveying)
    IS 5029 : 1979 Specification for Bedsteads, Hospital, General Purposes
    IS 5030 : Part I : 1982 Specification for Metal Cutting Bandsaw Blades – Part I : Definitions and Terminology
    IS 5030 : Part II : 1982 Specification for Metal Cutting Bandsaw Blades – Part II : Tolerances
    IS 5030 : Part III : 1982 Specification for Metal Cutting Bandsaw Blades – Part III : Dimensions and Requirements
    IS 5031 : 1992 Saws – Metal Slitting – Specification
    IS 5032 : 1983 Recommended sizes of cupola furnace for foundry
    IS 5033 : 1969 Specification for Telescopic Aerials for Portable Radio Receivers
    IS 5034 : 1987 Specification for Chromed Goatskin in Wet-blue Condition
    IS 5035 : 1969 Specification for Sterilizers, Bowl and Utensil (Pedal Type)
    IS 5036 : 1969 Specification for Filter Presses, Recessed Plate Type, and Plate and Frame Type
    IS 5037 : 1969 Pecification for Basic Rack and Modules of Straight Bevel Gears for General Engineering and Heavy Engineering
    IS 5038 : 1969 Specification for Ice Cube Trays for Domestic Refrigerators
    IS 5039 : 1983 Distribution pillars for voltages not exceeding 1 000 V AC and 1200 V DC
    IS 5041 : 1978 Specification for Footwear and Stationery Eyelets
    IS 5042 : 1976 Specification for 1-aminoanthraquinone
    IS 5043 : 1992 2-Aminoanthraquinone – Specification
    IS 5044 : 1969 Benzanthrone
    IS 5045 : 1989 Dye Intermediates – Metanilic Acid, Technical – Specification
    IS 5046 : 1994 Letter press ink, black, book printing
    IS 5047 : Part 1 : 1986 Glossary of Terms Relating to Aluminium Aluminium Alloys – Part 1 : Unwrought and Wrought
    IS 5047 : Part II : 1979 Glossary of Terms Relating to Aluminium and Aluminium Alloys – Part II : Plant and Operations, Thermal IS 5047 : Part III : 1979 Glossary of Terms Relating to Aluminium and Aluminium Alloys – Part III : Geometrical Properties and Tolerance, IS 5048 : 1969 Specification for Equipment Fasteners (Web Equipment Pattern)
    IS 5050 : 1992 Code of practice for design, construction and maintenance of relief wells
    IS 5051 : Part I : 1982 Specification for Relays for Electronics and Telecommunication Equipment – Part I : General Requirements IS 5051 : Part II : Sec 1 to 3 : 1982 Specification for Relays for Electronics and Telecommunication Equipment – Part II : Reed Relays
    IS 5051 : Part 3 : Sec 1 : 1985 Specification for Relays for Electronics and Telecommunication Equipment – Part 3 : Armature Relays, IS 5052 : 1993 Aluminium and its alloys – Temper designations
    IS 5053 : 1969 Dimensions for wrought copper and copper alloy rods for fasteners
    IS 5054 : Part 1 : Sec 1 : 1995 Radio frequency connectors: Part 1 General requirements and measuring methods, Sec 1 General
    IS 5054 : Part 1 : Sec 2 : 1995/IEC 169-1-1 : 1987 Radio frequency connectors:Pt 1 General requirements and measuring methods:IS 5054 : Part 1 : Sec 3 : 1995/IEC 169-1-3 : 1988 Radio frequency connectors : Part 1 General requirements and measuring methods: IS 5055 : 1996 Lecithin, Food Grade – Specification
    IS 5056 : 1969 Common Names for Coal Tar Food Colours
    IS 5057 : 1997 Potassium Nitrite, Food Grade – Specification
    IS 5058 : 1996 Sodium Citrate, Food Grade – Specification
    IS 5059 : 1969 Code for Hygienic Conditions for Large Scale Biscuit Manufacturing Units and Bakery Units
    IS 5060 : 1969 Glossary of terms used in brushware industry
    IS 5062 : Part I : 1969 Methods of Test for Brown Coals and Lignites – Part I : Determination of Moisture Content by the Direct Volumetric IS 5062 : Part 2 : 1969 Methods of test for brown coals and lignites: Part II Determination of ash
    IS 5062 : Part 3 : 1969 Methods of test for brown coals and lignites: Part III Determination of the yields of tar, water, gas and coke IS 5062 : Part 4 : 1969 Methods of test for brown coals and lignites: Part IV Determination of the yield of benzene soluble extract
    IS 5062 : Part 5 : 1973 Methods of test for brown coals and lignites: Part V Determination of acetone soluble material in the benzene IS 5063 : 1969 Specification for TUR Husk
    IS 5064 : 1980 Specification for Tapioca Spent Pulp as Livestock Feed
    IS 5065 : 1986 Specification for Meat Meal as Livestock Feed Ingredient
    IS 5066 : 1969 Specification for Glass Pliers
    IS 5067 : 1969 Specification for Fencing Pliers
    IS 5068 : 1969 Specification for Grab Hook
    IS 5069 : 1982 Glossary of terms relating to methods of mechanical testing of metals
    IS 5070 : 1985 Method for beam unnotched impact test for grey cast iron
    IS 5074 : 1969 Method for axial load fatigue testing of steel
    IS 5075 : 1985 Method of rotating bar bending fatigue testing of metals
    IS 5077 : 1969 Decorative lighting outfits
    IS 5079 : 1969 Specification for Rubber Valve-tubing for Cycle Tube Valves
    IS 5080 : 1969 Specification for Brushes, Nail-cleaning
    IS 5081 : 1990 Glass Tubes for Tubular Fluorescent Lamps for General Lighting Service – Specification
    IS 5082 : 1998 Wrought aluminium and aluminium alloy bars, rods, tubes and sections for electrical purposes
    IS 5083 : 1988 Knifing stopper
    IS 5084 : 1990 Socks, Nylon – Specification
    IS 5085 : 1976 Specification for Berets, Wool, Knitted
    IS 5086 : 1993 Stencil paper
    IS 5087 : 1969 Specification for Wire Stripping Pliers
    IS 5089 : 1969 Specification for Blade Plate, Blount Type
    IS 5090 : 1969 Specification for Blade Plate, Moore Type
    IS 5091 : 1969 Dimensions for circular base plates
    IS 5092 : 1969 Dimensions for square and rectangular base plates
    IS 5093 : 1996 Locating Pins (Round) – Specification
    IS 5094 : 1969 Dimensions for diamond locating pins
    IS 5095 : 1998 End locating plugs – Specification
    IS 5096 : 1969 Dimensions for round locating studs
    IS 5097 : 1969 Dimensions for diamond locating studs
    IS 5098 : 1969 Specification for Cross-cut and Rip Saws
    IS 5099 : 2003 Technical Supply Conditions for Twist Drills
    IS 5100 : 1969 Specification for Twist Drills, Parallel Shanks, Stub Series for Right hand Cutting
    IS 5101 : 1991 Twist Drills, Parallel Shank, Jobber Series – Specification
    IS 5102 : 1969 Specification for Twist Drills, Parallel Shank, Long Series
    IS 5103 : 1969 Specification for Twist Drills, Morse Taper Shanks
    IS 5104 : 1969 Specification for Twist Drills, Oversize Morse Taper Shank
    IS 5105 : 1969 Specification for Twist Drills, Taper Square Shanks for Ratchet Braces
    IS 5106 : 1969 Specification for Twist Drills, Taper Square Shanks for Carpenter’s Braces
    IS 5107 : 1969 Recommendation on nominal pressure for oil-hydraulic system elements
    IS 5108 : 1969 Recommendation on nominal rates of flow for oil-hydraulic system elements
    IS 5109 : 1969 Recommendation on nominal bores for oil-hydraulic system elements
    IS 5110 : 1969 Specification for Corneal Loupe
    IS 5111 : 1993/ISO 917 : 1989 Testing of refrigerant compressors
    IS 5112 : 1972 General requirements and testing of AC cargo winches (for shipboard use)
    IS 5113 : 1979 General requirements and testing of AC mooring winches (for shipboard use)
    IS 5114 : 1969 Specification for Reflectorized Signs for Mines
    IS 5115 : 1969 Specification for Domestic Storage Type Water Heaters for Use With LPG
    IS 5116 : 1996 Domestic and commercial equipment for use with LPG – General requirements
    IS 5117 : 1993 Commercial boiling burners for use with LPG – Specification
    IS 5118 : 1969 Specification for Constructional Details of Ventilation Trunking for Shipboard Use
    IS 5119 : Part I : 1968 Code of Practice for Laying and Fixing of Sloped Roof Covering – Part I : Slating
    IS 5120 : 1977 Technical requirements for rotodynamic special purpose pumps
    IS 5121 : 1969 Safety code for piling and other deep foundations
    IS 5122 : 1969 Specification for Tyre Levers
    IS 5123 : 1969 Specification for Tenon and Dovetail Saws
    IS 5126 : 1996 /ISO 5492 : 1992 Sensory Analysis – Vocabulary
    IS 5127 : 1969 Specification for BABUL Bark
    IS 5128 : 1969 Specification for Avaram Bark
    IS 5129 : Part 1 : 2000/ISO 6194-1 : 1982 Rotary Shaft Lip Type Seals – Part 1 : Nominal Dimensions and Tolerances
    IS 5129 : Part 2 : 1987 Specification for Rotary Shaft Radial Lip Type Oilseal Units – Part 2 : Terminology and Recommendations IS 5129 : Part 3 : 2000/ISO 6194-3 : 1988 Rotary Shaft Lip Type Seals – Part 3 : Storage, Handling and Installation
    IS 5129 : Part 4 : 2000/ISO 6194-4 : 1988 Rotary Shaft Lip Type Seals – Part 4 : Performance Test Procedures
    IS 5129 : Part 5 : 2000/ISO 6194-5 : 1990 Rotary Shaft Lip Type Seals – Part 5 : Identification of Visual Imperfections
    IS 5130 : 1969 Specification for Drums Fitted to Cargo and Mooring Winches
    IS 5131 : 2002 Dividing Breeching with Control for Fire Brigade Use – Specification
    IS 5134 : 1977 Specification for Bitumen Impregnated Paper
    IS 5135 : Part 1 : 1994 Specification for Hand-Rotary Duster – Part 1 : Belly-Mounted Type
    IS 5135 : Part 2 : 1994 Specification for Hand Rotary Duster – Part 2 : Shoulder Mounted Type
    IS 5137 : 1990 Rubber Hose for Cement Grouting – Specification
    IS 5138 : 1981 Specification for Ear-shaped Metal Travellers for Doubling Frames
    IS 5139 : 1995 Repair of cast iron castings by oxy-acetlene and manual metal arc welding – Recommendations
    IS 5140 : 1969 Specification for Auriscope
    IS 5141 : 1969 Specification for Wooden Cones for Winding Yarn
    IS 5142 : 1969 Continuously variable voltage auto transformers
    IS 5143 : 1988 Specification for Adjustable Axillary Crutches
    IS 5144 : 1980 Specification for Metal Forearm Crutches (Canadian Pattern)
    IS 5145 : 1969 Specification for Walking Sticks
    IS 5146 : 1969 Specification for Sounding Sextant
    IS 5147 : 1969 Specification for Examination Lamp with Bull’s Eye Condenser (Floor Model)
    IS 5148 : 1969 Specification for Hand Magnifiers (Circular) – 50, 75 and 100 mm
    IS 5149 : 1977 Specification for Maleic Anhydride, Technical
    IS 5150 : 1969 Specification for Rubber Tips for Crutches and Walking Stricks
    IS 5151 : 1969 Method for Evaluating the Relative Efficiency of Wetting Agents for Mercerization
    IS 5153 : 1969 Specification for Proportional Compasses – 150, 200 AND 300 mm
    IS 5154 : 1980 Lead-acid traction batteries
    IS 5155 : 1969 Specification for Pipettes, Ostwald-Folin Type
    IS 5157 : 1981 Specification for Forceps, Eye, Iris
    IS 5158 : 1987 Specification for Phthalic Anhydride, Technical
    IS 5159 : 1969 Mains-operated electric shavers
    IS 5161 : 1969 Flexible electric heating pads for domestic use
    IS 5162 : 1980 Specification for Chhana
    IS 5164 : 1984 Specification for iso-borneol
    IS 5165 : 1969 Interchangeable conical ground-glass joints
    IS 5167 : 1981 Specification for Punched Open-Jaw Wrenches (Spanners)
    IS 5168 : 1969 Glass feeding bottles
    IS 5169 : 1986 Specification for Hacksaw Frames
    IS/ISO 5170 : 1977 Machine Tools – Lubrication Systems
    IS 5170 : 1969 Specification for Bone Plate, Sherman Type
    IS 5171 : 1969 Bone plate, kessel, osteotomy
    IS 5172 : 1969 Specification for Balancing Bench
    IS 5173 : 1979 Specification for Wall Bars
    IS 5175 : 1992 Polypropylene ropes (3-strand hawser-laid and 8-strand-plaited) – Specification
    IS 5176 : 1985 Specification for Hawser-laid Hemp Ropes
    IS 5177 : 1985 Specification for Jute Lines and Ropes
    IS 5178 : 1969 Specification for Gingival Margin Trimmers, Dental, No. GMT 1/2, 3/4, 5/6 and 7/8
    IS 5179 : 1986 Specification for Pluggers, Root Canal, Dental, No. PLG 1, 2 and 3
    IS 5180 : 1969 Specification for Needles, Hypodermic, Dental
    IS 5181 : 1969 Specification for Press, Flask, Dental
    IS 5182 : Part I : 1969 Methods for Measurement of Air Pollution – Part I : Dustfall
    IS 5182 : Part 2 : 2001 Methods for Measurement of Air Pollution – Part 2 : Sulphur Dioxide
    IS 5182 : Part 3 : 1970 Methods for measurement of air pollution : Part 3 Radioactivity (particulate in air)
    IS 5182 : Part 4 : 1999 Methods for Measurement of Air Pollution – Part 4 : Suspended Particulate Matter
    IS 5182 : Part V : 1975 Methods for Measurement of Air Pollution – Part V : Sampling of Gaseous Pollutants
    IS 5182 : Part VI : 1975 Methods for Measurement of Air Pollution – Part VI : Nitrogen Oxides
    IS 5182 : Part 7 : 1973 Methods for measurement of air pollution : Part 7 Hydrogen sulphide
    IS 5182 : Part 8 : 1976 Methods for measurement of air pollution : Part 8 Sulphation rate
    IS 5182 : Part 9 : 1974 Methods for measurement of air pollution : Part 9 Oxidants
    IS 5182 : Part 10 : 1999 Methods for Measurement of Air Pollution – Part 10 : Carbon Monoxide
    IS 5182 : Part 11 : 1993 Methods for measurement of air pollution : Part 11 Benzene
    IS 5182 : Part 12 : 1974 Methods for measurement of air pollution : Part 12 Polynuclear aromatic hydrocarbons in air particulate IS 5182 : Part 13 : 1991 Methods of Measurement of Air Pollution – Part 13 : Total Fluorides in Ambient Air
    IS 5182 : Part 14 : 2000 Methods for Measurement of Air Pollution – Part 14 : Guidelines for Planning the Sampling of Atmosphere
    IS 5182 : Part 15 : 1974 Methods for measurement of air pollution : Part 15 Mass concentration of particulate matter in the atmosphere
    IS 5182 : Part XVI : 1980 Methods for Measurement of Air Pollution – Part XVI : Recommended Practice for Collection by Filtration IS 5182 : Part XVII : 1979 Methods for Measurement of Air Pollution – Part XVII : C1 to C2 Hydrocarbons in Air By Gas Chromatography
    IS 5182 : Part 18 : 1974 Methods for measurement of air pollution : Part 18 Continuous analysis and automatic recording of the IS 5182 : Part 19 : 1982 Methods for measurement of air pollution : Part 19 Chlorine
    IS 5182 : Part 20 : 1982 Methods for measurement of air pollution : Part 20 Carbon disulphide
    IS 5182 : Part 21 : 2001 Methods for Measurement of Air Pollution – Part 21 : Non Methane Hydrocarbons in Air by Gas Chromatography
    IS 5184 : 1969 Code of Safety for Hydrofluoric Acid
    IS 5185 : 1969 Specification for Articulators, Dental
    IS 5186 : 1994 Design of chute and side channel spillways – Criteria
    IS 5187 : 1972 Specification for flush bolts
    IS 5188 : 1985 Specification for Cold Polymerized Oil-extended Raw Styrene-butadiene Rubber
    IS 5189 : 1985 Specification for Cold Polymerized Raw Styrene-butadiene Rubber
    IS 5190 : 1993 Code of Packaging of Natural Rubber Latex in Drums
    IS 5191 : 1993 Sodium Alginate, Food Grade – Specification
    IS 5192 : Part 1 : 1994 Natural rubber compounds – Specification : Part 1 for moulded Products
    IS 5192 : Part 2 : 1994 Natural rubber compounds – Specification : Part 2 for extruded products (second revision)
    IS 5193 : 1998 Rubber sealing rings for domestic fruit and vegetable preserving jars Specification (first revision)
    IS 5194 : 1969 Method for determination of nitrogen-Kjeldahl method
    IS 5195 : 1969 Specification for Paper Stationery Items for Schools
    IS 5196 : 1969 Specification for Chest Expander
    IS 5197 : 1987 Recommendations for layout and planning of drawings offices
    IS 5200 : 1998 Bolt Clippers – Specification
    IS 5201 : 1969 Methods for sampling of abrasive emery grain
    IS 5202 : 1969 Specification for Flat Hoisting Wire Ropes Used in Mines
    IS 5203 : 1969 Specification for Flat Balancing Wire Ropes Used in Mines
    IS 5204 : 1969 Specification for Research Microscope
    IS 5205 : 1969 Drawing pins
    IS 5206 : 1983 Covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels
    IS 5207 : 1969 Specification for Brushes, Clothes
    IS 5208 : 1969 Code of safety for acetic acid
    IS 5209 : 2002 Coal Preparation Plant – Principles and Conventions for Flwosheets
    IS 5210 : 1995 High Impact Polystyrene Sheet – Specification
    IS 5211 : 1969 Specification for Scissors, Dental No. 1, Straight and Curved on Flat
    IS 5212 : 1969 Specification for Scissors, Crown, Dental, Straight and Curved on Flat
    IS 5213 : 1969 Specification for French Curves for Drawing Office Use
    IS 5214 : 1969 Specification for Jumping and Vaulting Standards
    IS 5216 : Part I : 1982 Recommendations on Safety Procedures and Practices in Electrical Work – Part I : General
    IS 5216 : Part II : 1982 Recommendation on Safety Procedures and Practices in Electrical Work – Part II : Life Saving Techniques
    IS 5217 : 1969 Specification for Clamp, Flask, Dental
    IS 5218 : 1969 Method of Test for Toughness of Natural Building Stones
    IS 5219 : Part 1 : 1969 Specification for cast copper alloys traps: Part 1 ‘P’ and ‘S’ traps
    IS 5220 : 1969 Specification for Forged Horn Cleats
    IS 5223 : 1993 Oilseeds milling machinery – Oil expellers – Test code
    IS 5224 : 1993 Oilseeds Milling Machinery – Oil Expellers Single Barrel – Specification
    IS 5225 : 1992 Meteorology – Raingauge, non recording – Specification
    IS 5226 : 1989 Eye surgery instruments – Forceps, eye, corneo-scleral disc, Elliot’s pattern – (Modified)-Specification
    IS 5227 : 1969 Specification for Flasks, Dental
    IS 5228 : 2003 Continuous Movement Monocable Ropeways with Fixed Grips Intended for Transportation of Passengers – Code IS 5229 : 1998 Aerial ropeways – Transportation of passengers – Continuous movement monocable with automatic grips – Construction IS 5230 : 2003 Continuous to and Fro Movement Bicable Ropeways Intended for the Transportation of Passengers – Code of Practice IS 5231 : 1990 Eye surgery instruments – Forceps, eye tarsal cyst, Green’s pattern (modified) – Specifcation
    IS 5232 : 1990 Eye Surgery Instruments – Forceps, Eye, Cilia, Beer’s Pattern (modified) – Specification
    IS 5233 : 1990 Eye surgery instruments – Forceps, eye, intra-capsular, arruga’s and Elschnig’s pattern (Modified) – Specification
    IS 5234 : 1989 Eye surgery instruments – Forceps, eye,extra capsule, Couper’s pattern (modified) – Specification
    IS 5235 : 1992 Meteorology – Raingauge, recording – Specification
    IS 5236 : 1982 Code for Transport of Pigs by Rail and Road
    IS 5237 : 1969 Code for transport of small and medium sized seed eating birds
    IS 5238 : 2001 Transport of Poultry – Code of Practice
    IS 5238 : Part 1 : 1982 Code for transport of poultry: Part 1 Transport of day-old chicks and turkey poults
    IS 5238 : Part 2 : 1982 Code for transport of poultry:Part 2 Transport of poultry other than day-old chicks and turkey poultry
    IS 5240 : 1969 Specification for Cast Skew Bollards
    IS 5241 : 1987 Specification for Shoe Polish Containers
    IS 5242 : 1979 Method of test for determining shear strength of metals
    IS 5244 : 1991 Safe deposit locker cabinets – Specification
    IS 5245 : Part 1 : 1969 Methods for splicing of wire ropes Part 1 Hand splicing of wire ropes
    IS 5245 : Part II : 1971 Methods for Splicing of Wire Ropes – Part II : Wire Rope Sling Legs with Ferrule-Secured Eye Terminals
    IS 5246 : 2000 Coniferous Logs – Specification
    IS 5247 : Part 1 : 1982 Specification for converted timber (coniferous) : Part 1 Light furniture
    IS 5247 : Part 2 : 1982 Specification for converted timber (coniferous) : Part 2 Packing cases amd crates
    IS 5248 : 1988 Specification for teak logs for production of sliced veneers
    IS 5249 : 1992 Method of test for determination of dynamic properties of soil
    IS 5250 : 1984 Specification for Swing Clamps
    IS 5251 : 1984 Specification for Table Clamps
    IS 5252 : 1969 Dimensions for Wide Clamp Plates
    IS 5253 : 1969 Guidelines for cleaning and sterilizing dairy equipment
    IS 5254 : 1980 Specification for Acetanilide, Technical
    IS 5255 : 1986 Specification for Poultry Feeders
    IS 5256 : 1992 Sealing Expansion Joints in Concrete Lining of Canals – Code of practice
    IS 5257 : 1969 Specification for eyepiece and screen graticule for determination of particle size of powders
    IS 5258 : 1969 Determination of particle size of powders by optical microscope method
    IS 5260 To IS 5266 : 1969 Specifications for Test Films for 16 mm Sound-and-picture Cinematography Projectors
    IS 5267 : 2002/ISO 1122-2 : 1999 Vocabulary of Gear Terms – Definitions Related to Worm Gear Geometry
    IS 5268 : Part 1 : 1991 Engineering Metrology – Straightedges – Part 1 : Cast Iron Staightedges (Bow Shaped or Camel Back Type IS 5269 : 1987 Specification for Access Hatches for Inland Vessels
    IS 5270 : 1969 Specification for Rubber Grommets for General Purposes
    IS 5271 : 1984 Specification for Paraformaldehyde
    IS 5273 : 1969 Specification for radius gauges
    IS 5277 : 1978 Specification for Dichlorvos Emulsifiable Concentrates
    IS 5278 : 1969 Specification for Dicofol, Technical
    IS 5279 : 1969 Specification for Dicofol Emulsifiable Concentrates
    IS 5280 : 1969 Specification for Fenitrothion, Technical
    IS 5281 : 1979 Specification for Fenitrothion Emulsifiable Concentrates
    IS 5282 : 1969 Liquid sedimentation methods for determination of particle size of powders
    IS 5283 : 1969 Specification for Poultry Waterers, Portable
    IS 5284 : 1969 Recommendations for community milking shed
    IS 5285 : 1998 Fibre Analysis of Paper and Board – Methods of Test
    IS 5286 : 1988 Alcoholic Drinks – Vodka – Specification
    IS 5287 : 1989 Alcoholic Drinks – Country Spirit (Distilled) – Specification
    IS 5288 : 1980 Specification for Barium Chloride
    IS 5289 : 1989 Shipbuilding – Magnetic Compasses and Binnacles – Glossary of Terms
    IS 5290 : 1993 Specification for landing valves
    IS 5291 : 1969 Specification for Tables, Operation, Hydraulic, Major
    IS 5292 : 1969 Grading for safflower seeds for oil milling
    IS 5293 : 1969 Grading for niger seeds for oil milling
    IS 5294 : 1969 Grading for KUSUM seeds for oil milling
    IS 5295 : 1985 Specification for Ethylene Glycol
    IS 5296 : 1995 Chloroform, Pure and Technical – Specification
    IS 5297 : 1977 Specification for Perchloroethylene (tetrachloroethylene), Technical
    IS 5298 : 1983 Method for determination of distillation range and of distillation yield
    IS 5299 : 1969 Methods of sampling and tests for dye-intermediates
    IS 5300 : 1969 Specification for Porcelain Guy Strain Insulators
    IS 5301 : 1987 Sodium chlorate
    IS 5302 : 1969 Code of safety for acetic anhydride
    IS 5303 : 1974 Zircon flour for use in foundries
    IS 5305 : 1969 Method for volumetric determination of phosphorus
    IS 5306 : 1996 Sodium Carboxymethyl Cellulose, Food Grade – Specification
    IS 5307 : 1969 Glossary of mining terms (boring and exploration)
    IS 5309 : 2001 Poultry Farming Equipment – Brooders – Specification
    IS 5309 : Part 1 : 1987 Specification for Brooders – Part 1 : Battery Brooders
    IS 5309 : Part 2 : 1987 Specification for Brooders – Part 2 : Floor Brooders
    IS 5310 : 1987 Specification for Poultry Incubators
    IS 5311 : 1969 Code of safety for carbon tetrachloride
    IS 5312 : Part 1 : 1984 Specification for Swing Check Type Reflux (Non-Return] Valves for Water Works Purposes – Part 1 : Single-IS 5312 : Part 2 : 1986 Specification for Swing Check Type Reflux (non-return) Valves for Water Works Purpose – Part 2 : Multi-IS 5313 : 1980 Guide for Core Drilling Observations
    IS 5314 : 1986 Specification for Graduated Drinking Vessels for Lifeboats and Liferafts for Sea-Going Ships
    IS 5316 : 1998 Ammonium carbonate – Specification
    IS 5317 : 2002 Pitch-Mastic for Bridge Decking and Roads – Specification
    IS 5318 : 1969 Code of practice for laying of flexible PVC sheet and tile flooring
    IS 5319 : 1987 Specification for Commercial Steel Wool
    IS 5321 : 1969 Soda lime (as carbon dioxide absorbent)
    IS 5322 : 1988 Specification for High Density Polyethylene Wash-Bowls
    IS 5323 : 1969 Letter Symbols and Abbreviations for Electron Tubes
    IS 5324 : 1996 Hand-Operated Stillage Truck – Lifting Truck (Hand Elevating) – Specification
    IS 5325 : 1989 Box Pallets for Through Transit of Goods – Methods of Test
    IS 5326 : 1969 Specification for Cork Life-buoys
    IS 5327 : 1969 Specification for Rigid Bailers for Lifeboats
    IS 5328 : 1969 Method of test for determination of chemical composition of asbestos fibre
    IS 5329 : 1983 Code of practice for sanitary pipe work above ground for buildings
    IS 5330 : 1984 Criteria for design of anchor blocks for penstocks with expansion joints
    IS 5334 : 1981 Code of practice for magnetic particle flaw detection of welds
    IS 5336 : 1969 Specification for Back Rest
    IS 5337 : 1969 Specification for Cot, Dropside, Baby, Hospital
    IS 5338 : 1969 Specification for Catheter, Eustachian
    IS 5339 : 1978 Specification for Skin Powder for Infants
    IS 5340 : 1981 Specification for Lanolin, Anhydrous, for Cosmetic Industry
    IS 5341 : 1980 Specification for Benzyl Chloride, Technical
    IS 5342 : 1996 Ascorbic Acid, Food Grade – Specification
    IS 5343 : 1996 Butylated Hydroxyanisole, Food Grade – Specification
    IS/ISO 5344 : 1980 Electrodynamics Test Equipment for Generating Vibration – methods of describing equipment characteristics
    IS 5345 : 1996 Sodium Saccharin, Food Grade – Specification
    IS 5346 : 1994 Synthetic Food Colour – Preparations and Mixtures – Specification
    IS 5347 : Part 1 : 1986 Requirements for Orthopedic Implants – Part 1 : General Requirements
    IS 5347 : Part 2 : 1993/ISO 5832-1 : 1987 Requirements for orthopaedic Implants Part 2 Wrought stainless steel
    IS 5347 : Part 3 : 1996/ISO 5832-2 : 1993 Requirements for orthopaedic implants Part 3 Unalloyed titanium
    IS 5347 : Part 4 : 1996/ISO 5832-3 : 1990 Requirements for orthopaedic implants Part 4 Wrought titanium 6-aluminium 4- vanadium IS 5347 : Part 5 : 2000/ISO 5832-4 : 1996 Requirements for Orthopaedic Implants – Part 5 : Cobalt-chromium-molybdenum Casting IS 5347 : Part 6 : 1996/ISO 5832-5 : 1993 Requirements for orthopaedic implants Part 6 Wrought-cobalt-chromium tungsten-nickel IS 5347 : Part 7 : 2002 /ISO 5832-6 : 1997 Requirements for Orthopaedic Implants – Part 7 : Wrought Cobalt-Nickel-Chromium-IS 5347 : Part 8 : 1997/ISO 5832-7 : 1994 Requirements for orthopaedic implants Part 8 Forgeable and cold-formed-cobalt-chromium-IS 5347 : Part 9 : 1998/ISO 6474 : 1994 Requirements for Orthopaedic Implants – Part 9 : Ceramic Materials Based on High Purity IS 5347 : Part 10 : 1987/ISO 5834-1 : 1985 Requirements for Orthopaedic Implants – Part 10 : Ultra-High Molecular Weight Polyethylene, IS 5347 : Part 11 : 1987/ISO 5834-2 : 1985 Requirements for Orthopaedic Implants – Part 11 : Ultra-high Molecular Weight Polyethylene,
    IS 5347 : Part 12 : 1993/ISO 5832-8 : 1987 Requirements for orthopaedic implants Part 12 Wrought cobalt-nickel-chromium molybdenum IS 5347 : Part 13 : 1997/ISO 5832-9 : 1992 Requirements for orthopaedic implants Part 13 Wrought high nitrogen stainless steel
    IS 5347 : Part 14 : 1997/ISO 5832-10 : 1996 Requirements for orthopaedic implants Part 14 Wrought titanium 5-aluminium 2,5-IS 5347 : Part 15 : 1997/ISO 5832-11 : 1994 Requirements for orthopaedic implants Part 15 Wrought titanium 6-aluminium 7-niobium IS 5347 : Part 16 : 2002/ISO 13781 : 1997 Requirements for Orthopaedic Implants – Part 16 : Poly (L-Lactide) Resins and Fabricated IS 5347 : Part 17 : 2002 /ISO 13782 : 1996 Requirements for Orthopaedic Implants – Part 17 : Metallic Materials – Unalloyed Tantalum IS 5347 : Part 18 : 2002/ISO 13356 : 1997 Requirements for Orthopaedic Implants – Part 18 : Ceramic Materials Based on Yttria-IS 5348 : 1981 Specification for Staples
    IS/ISO 5349 : 1986 Mechanical Vibration – Guidelines for the Measurement and the Assessment of Human Exposure to Hand Transmitted IS 5349 : 1969 Specification for Staplers
    IS 5350 : Part I : 1970 Dimensions of Indoor and Outdoor Porcelain Post Insulators and Post Insulator Units for Systems with Nominal IS 5350 : Part II : 1973 Dimensions of Indoor and Outdoor Procelain Post Insulators and Post Insulator Units for System with Nominal IS 5350 : Part III : 1971 Dimensions of Indoor and Outdoor Porcelain Post Insulators and Post Insulator Units for Systems with IS 5351 : 2001 Textiles – Polyester Fiber Woven Tape for Electrical Insulation Purposes – Specification
    IS 5352 : 1988 Glass-fibre woven tape for electrical purposes
    IS 5352 : Part 1 : 1999 Textile – Glass and Glass-polyester Fibre Woven Tapes – Part 1 : Specification
    IS 5352 : Part 2 : 1999 Textiles – Glass and Glass-Polyester Fibre Woven Tapes – Part 2 : Methods of Test
    IS 5353 : 1969 Screen luminance for the projection of 35 mm film on matt and directional screens
    IS 5354 : 1992 Textiles – Cotton stripping tape for electrical purposes
    IS 5356 : 1983 Specification for Isopropyl Myristate for Cosmetic Industry
    IS 5357 : 1969 Specification for Metallic Ear Syringe
    IS 5359 : 1987 Specification for Sine Bars
    IS 5360 : 1969 Dimensions for driving tenons
    IS 5362 : 1969 Specification for Twist Drills, Parallel Shanks, Stub Series, Left Hand Cutting for Automatics
    IS 5363 : 1983 Specification for Micro-drills
    IS 5364 : 1969 Twist drills for taper pin holes with taper 1:50
    IS 5365 : 1991 Core Drills, Parallel Shanks – Specification
    IS 5366 : 1978 Specification for Core Drills, Morse Taper Shanks
    IS 5367 : 1969 Specification for Forceps, Eye, Strabismus, for Advancement (Prince’s and Worth’s Patterns)
    IS 5368 : 1969 Specification for Thin Slotted and Castle Nuts (dia range 6 to 52 mm)
    IS 5369 : 1975 General Requirements for Plain Washers and Lock Washers
    IS 5370 : 1969 Specification for Plain Washers with Outside Diameter 3 X Inside Diameter
    IS 5371 : 1982 Specification for – Multi-tooth Lock Washers
    IS 5372 : 1975 Taper washers for channels (ISMC)
    IS 5373 : 1969 Square washers for wood fastenings
    IS 5374 : 1975 Taper washers for I-beams (ISMB)
    IS 5375 : 1979 Data for procurement of cylindrical gears
    IS 5376 : 1969 Specification for Dioptric Lenses for Navigational Lanterns
    IS 5377 : 1969 Specification for Speculum, Nasal, Thudichum’s
    IS 5378 : 1994 Polyethylene Cane – Specification
    IS 5379 : 1969 Ammonium thiosulphate, photographic grade
    IS 5380 : 1976 Sodium bromide, photographic grade
    IS 5382 : 1985 Specification for Rubber Sealing Rings for Gas Mains, Water Mains and Sewers
    IS 5383 : 1978 Specification for Tooth Powder
    IS 5384 : 1985 Aluminium I-beam
    IS 5385 : 1969 Specification for Lifeboat Accessories
    IS 5386 : 1969 Specification for General purpose Ship’s Davit
    IS 5387 : 1969 Dimensions for stillages
    IS 5388 : 1983 Specification for Hexagon Handles for Plain and Threaded Plug Gauges
    IS 5389 : 1969 Code of practice for laying of hardwood parquet and wood block floors
    IS 5390 : 1984 Code of practice for construction of timber ceilings
    IS 5391 : 1992 Specification for adjustable metal chairs for use of typists and operators in telephone exchanges
    IS 5392 : 1969 Specification for Bone Plates, Eggers Type
    IS 5393 : 1969 Specification for Screws, Bone
    IS 5394 : 1969 Specification for Prostheses, Hip
    IS 5395 : Part 1 : 1989 /ISO 5837-1 : 1985 Specification for Surgical Implants – Intramedullary Nailing Systems for Bone Surgery IS 5396 : 1969 Specification for Guide Pin for Kuntscher Nail
    IS 5397 : 1969 Specification for Reamer, Flexible for Kuntscher Nail (medullary canal)
    IS 5398 : 1969 Methods for estimation of thiamine (vitamin B-1) in foodstuffs
    IS 5399 : 1969 Methods for estimation of riboflavin (vitamin B-2) in foodstuffs
    IS 5400 : 1969 Methods for estimation of nicotinic acid (Niacin) in foodstuffs
    IS 5401 : 1969 Method for detection and estimation of coliform bacteria in foodstuffs
    IS 5401 : Part 1 : 2002/ISO 4831 : 1991 Microbiology – General Guidance for the Enumeration of Coliforms – Part 1 : Colony Count IS 5401 : Part 2 : 2002/ISO 4831 : 1991 Microbiology – General Guidance for the Enumeration of Coliforms – Part 2 : Most Probable IS 5402 : 2002/ISO 4833 : 1991 Microbiology – General Guidance for the Enumeration of Micro-Oraganisms – Colony Count Technique IS 5403 : 1999 Method for Yeast and Mould Count of Foodstuffs
    IS 5404 : 1984 Methods for Drawing and Handling of Food Samples for Microbiological Analysis
    IS 5405 : 1980 Specification for Sanitary Napkins
    IS 5406 : 1979 Specification for Urea, Fertilizer Grade
    IS 5409 : Part 1 : 1985 Specification for Agricultural Liming Materials as Soil Amendments – Part 1 : Hydrated Lime and Burnt Lime
    IS 5409 : Part 2 : 1985 Specification for Agricultural Liming Materials as Soil Amendments – Part 2 : Limestone and Dolomite
    IS 5410 : 1992 Cement Paint – Specification
    IS 5411 : Part I : 1974 Specification for Plastic Emulsion Paint – Part I : For Interior Use
    IS 5411 : Part II : 1972 Specification for Plastic Emulsion Paint – Part II : For Exterior Use
    IS 5412 : 1969 Specification for Saws, Nasal, Joseph’s Pattern
    IS 5414 : 1995 Gaskets and Packings – Gland Packing Jute and Hemp – Specification
    IS 5415 : 1969 Code of practice for packing and packaging of optical and mathematical instrument and components
    IS 5416 : Part 1 : 1988 Method of test for strength and stability of chairs and stools Part 1 Strength
    IS 5416 : Part 2 : 1988 Methods of Test for Strength and Stability of Chairs and Stools – Part 2 : Determination of Stability of Chairs IS 5420 : Part 1 : 1969 Guide on precision of test methods:Part 1 Principles and applications
    IS 5420 : Part 2 : 1973 Guide on precision of test methods:Part 2 Inter laboratory testing
    IS 5421 : 1981 Glossary of terms relating to test sieves and test sieving
    IS 5422 : 1996 Turbine type generators
    IS 5423 : 1989 Automotive Vehicles – Shock Absorbers – Specification
    IS 5424 : 1969 Specification for rubber mats for electrical purpose
    IS 5425 : Part 1 : 1969 Methods of chemical analysis of misch metal Part 1 Determination of cerium
    IS 5425 : Part 2 : 1984 Methods of chemical analysis of misch metal Part 2 Determination of total rare earths
    IS 5425 : Part 3 : 1987 Methods of chemical analysis of misch metal Part 3 Determination of iron
    IS 5425 : Part 4 : 1987 Methods of chemical analysis of misch metal Part 4 Determination of aluminium
    IS 5425 : Part 5 : 1987 Methods of chemical analysis of misch metal Part 5 Determination of carbon
    IS 5426 : 1969 Specification for Traveling Bees-box
    IS 5427 : 1969 Specification for Honey Extractor, Radial Type
    IS 5428 : Part 1 : 1985 Specification for Gauge Glasses – Part 1 : Tubular Glasses for Level Gauges
    IS 5428 : Part 2 : 1985 Specification for Gauge Glasses – Part 2 : Protector Glasses for Tubular Gauge Glasses
    IS 5428 : Part 3 : 1985 Specification for Gauge Glasses – Part 3 : Through-vision and Reflex Glasses
    IS 5428 : Part 4 : 1985 Specification for Gauge Glasses – Part 4 : Circular Sight and Light Glasses
    IS 5428 : Part 5 : 1985 Specification for Gauge Glasses – Part 5 : Port Gauge Glasses as Used in Fittings for Steam Boilers
    IS 5429 : 1979 Dimensions for steel tubes for automotive purposes
    IS 5430 : 1981 Specification for Ammonia Preserved Concentrated Natural Rubber Latex
    IS 5432 : 1982 Glossary of terms relating to powder metallurgy
    IS 5433 : 1969 Oil well steel casing pipes and couplings
    IS 5434 : 1969 Specification for non-ferrous alloy bottle traps for marine use
    IS 5435 : 1987 General Requirements for Cold Bituminous Macadam Mixing Plants
    IS 5436 : 1969 Method of Testing Oil-fired Rotary Dryers for Hot Mix Asphalt and Bituminous Macadam Plants
    IS 5437 : 1994 Figured rolled and wired glass
    IS 5438 : 1977 Specification for Nitrobenzene-3-Sulphonic Acid, Sodium Salt
    IS 5439 : 1978 Specification for Oil Pressure Switches for Automobiles
    IS 5440 : 1969 Specification for Optical Flats
    IS 5441 : 1986 Portable pneumatic drilling machine
    IS 5442 : 1992 Classification of haematite iron ore
    IS 5443 : 1994 High speed steel reamers – Technical supply conditions
    IS 5444 : 1978 Specification for Parallel Hand Reamers with Parallel Shanks
    IS 5445 : 1978 Specification for Long Fluted Machine Reamers with Morse Taper Shanks
    IS 5446 : 1978 Specification for Machine Chucking Reamers with Parallel Shanks
    IS 5447 : 1978 Specification for Machine Chucking Reamers with Morse Taper Shanks
    IS 5448 : 1980 Specification for Dextrins for Textile Industry (Including British Gum)
    IS 5449 : 1969 Methods for determination of water soluble chromates in textile materials
    IS 5450 : 1986 Specification for Gloves, Wool, Knitted
    IS 5451 : 2001 Glossary of Terms Relating to Coal Carbonization Products
    IS 5452 : 1994 Spices and Condiments – Dehydrated Garlic – Specification
    IS 5453 : Part 1 : 1996 Saffron – Part 1 : Specification
    IS 5453 : Part 2 : 1996 /ISO 3632-2 : 1993 Saffron – Part 2 : Methods of Test
    IS 5454 : 1978 Methods of sampling of clay building bricks
    IS 5455 : 1969 Specification for cast-iron steps for manholes
    IS 5456 : 1985 Code of Practice for Testing of Positive Displacement Type Air Compressors and Exhausters
    IS 5457 : 1969 Sizes of folders and files
    IS 5458 : 1969 Specification for Rounders Ball
    IS 5459 : 1969 Specification for Base Balls
    IS 5460 : 1969 Specification for Soft Balls
    IS 5461 : 1984 Method for sieve analysis of metal powders
    IS 5463 : 1969 Methods for Sampling of Cotton Fabrics for Chemical Tests
    IS 5464 : 1995 Citric acid, monohydrate – Specification
    IS 5465 : 1969 Specification for Sonali Bark
    IS 5466 : 1969 Methods of Test for Vegetable Tanning Materials
    IS 5467 : 1986 Specification for Shellac Wax
    IS 5468 : 1993 Blanco – Specification
    IS 5469 : Part 1 : 1969 Code of Practice for the Use of Semiconductor Junction Devices
    IS 5469 : Part 2 : 1973 Code of practice for the use of semiconductor junction devices: Part 2 Diodes
    IS 5469 : Part 3 : 1973 Code of practice for the use of semiconductor junction devices: Part 3 Thyristors
    IS 5470 : 2002 Dicalcium Phosphate, Animal Feed Grade – Specification
    IS 5473 : 1969 Specification for Double Flanged Bobbins Used in Woollen and Worsted Mills
    IS 5474 : Parts 1 to 5 : 1989 Shipbuidling – Round windows (side scuttles)
    IS 5475 : Part I : 1978 Specification for Polystyrene Film Dielectric Capacitors – Part I : General Requirements and Methods of IS 5475 : Part 2 : 1979 Specification for Polystyrene Film Dielectric Capacitors – Part 2 : Type FCPS 1
    IS 5475 : Part 4 : 1985 Specification for Fixed Polystyrene Film Dielectric Capacitors – Part 4 : Type FCPS-3
    IS 5476 : 1986 Glossary of term relating to jute
    IS 5477 : Part 1 : 1999 Fixing the Capacities of Reservoirs – Methods – Part 1 : General Requirements
    IS 5477 : Part 2 : 1994 Fixing the capacities of reservoirs – Methods Part 2 Dead storage
    IS 5477 : Part 3 : 1969 Methods for fixing the capacities of reservoirs: Part 3 Live storage
    IS 5477 : Part 4 : 1971 Methods for fixing the capacities of reservoirs: Part 4 Flood storage
    IS 5478 : 1969 Thermostat metal sheet and strip
    IS 5479 : 1985 Solders for jointing aluminium and aluminium alloys
    IS 5480 : 1983 Specification for Automobile Polish, Paste
    IS 5481 : 1992 Floor Polish, Liquid – Specification
    IS 5484 : 1997 EC grade aluminium rod produced by continuous casting and rolling
    IS 5485 : 1980 Specification for Cotton Yarn Waste
    IS 5486 : 1985 Specification for quick release knife
    IS 5487 : 1992 Metal Polish, Liquid – Specification
    IS 5488 : 1987 Dimensions and dimensional tolerances for hot rolled steel plates for ship’s hull structure
    IS 5489 : 1975 Carburizing steels for use in bearing industry
    IS 5491 : 1969 Code of practice for laying of in-situ granolithic concrete flooring topping
    IS 5492 : 1969 Specification for Pirns for Woollen and Worsted Plain Looms
    IS 5493 : 1981 Dimensions for wrought copper and copper alloy tubes
    IS 5495 : 1969 Sizes and shapes for firebricks (300 mm and higher sizes)
    IS 5496 : 1993 Guide for preliminary dimensioning and layout of elbow type draft tubes for surface hydroelectric power stations
    IS 5497 : 1983 Guide for topographical surveys for river valley projects
    IS 5499 : 1969 Code of practice for construction of underground air-raid shelters in natural soil
    IS 5500 : 1977 Specification for vibratory rollers
    IS 5500 : Part 2 : 1992 Vibratory roller – General requirements Part 2 Self propelled heavy duty single drum
    IS 5501 : 1969 Specification for pneumatic tyred roller
    IS 5502 : 1988 General requirements for smooth-wheeled diesel road roller
    IS 5503 : Part I : 1969 General Requirements for Silos for Grain Storage – Part I : Constructional Requirements
    IS 5503 : Part II : 1969 General Requirements for Silos for Grain Storage – Part II Grain Handling Equipment and Accessories
    IS 5504 : 1997 Specification for Spiral Welded Pipes
    IS 5505 : 1985 Specification for multi-edged rescue axe (non-wedging)
    IS 5508 : Parts I to V : 1969 Guide for Fishing Gear
    IS 5508 : Parts VI to XIII : 1972 Guide for Fishing Gear
    IS 5508 : Part 14 to 16 : 1975 Guide for fishing gear
    IS 5508 : Part 17 and 18 : 1976 Guide for fishing gear
    IS 5508 : Parts XIX to XXI : 1979 Guide for Fishing Gear
    IS 5508 : Part 22 : 1981 Guide for fishing gear : Data sheet for troll line
    IS 5508 : Part 23 : 1994 Guide for fishing gear : Part 23 26.8 m two seam trawl
    IS 5508 : Part 24 : 1994 Guide for fishing gear:Part 24 37.1 m butterfly trawl nets.
    IS 5509 : 2000 Fire Retardant Plywood – Specification
    IS 5510 : 1969 Guide for soil surveys for river valley projects
    IS 5511 : 1991 Covered electrodes for manual metal arc welding of cast iron_
    IS 5512 : 1983 Specification for flow table for use in tests of hydraulic cements and pozzolanic materials
    IS 5513 : 1996 Specification for vicat apparatus
    IS 5514 : 1996 Apparatus Used in `Le-chatelier’ Test – Specification
    IS 5515 : 1983 Specification for compaction factor apparatus
    IS 5516 : 1996 Specification for variable flow type air-permeability apparatus (Blaine type)
    IS 5517 : 1993 Steels for Hardening and Tempering – Specification
    IS 5518 : 1996 Steels for die blocks for drop forging
    IS 5519 : 1979 Deviations for untoleranced dimensions and mass of grey iron castings
    IS 5520 : 1969 Specification for Wooden Lasts for Heavy-Duty Boots
    IS 5521 : 1980 Specification for Steel Tanks for Storage of Molasses
    IS 5522 : 1992 Stainless steel sheets and strips for utensils
    IS 5523 : 1983 Methods of Testing Anodic Coatings on Aluminium and its Alloys
    IS 5524 : 1980 Specification for Men’s Wool-cotton Underpants
    IS 5525 : 1969 Recommendations for Detailing of Reinforcement in Reinforced Concrete Works
    IS 5527 : 1969 Layout plan for sugar factory laboratories
    IS 5528 : 1985 Method of testing corrosion resistance of electroplated and anodized aluminium coating by copper accelerated IS 5529 : Part 1 : 1985 Code of practice for in-situ permeability test: Part 1 Test in overburden
    IS 5529 : Part 2 : 1985 Code of Practice for In-situ Permeability Tests – Part 2 : Tests in Bedrock
    IS 5530 : 1987 Recommendations for production rectification and repair of steel castings by metal arc welding process
    IS 5531 : 1988 Cast iron specials for asbestos-cement pressure pipes for water, gas and sewage
    IS 5533 : 1969 Recommendations for dimensions for spaces for human activities
    IS 5534 : 1969 Method for determination of specific surface area of powder ore samples
    IS 5535 : 1969 Specification for Rugby Ball
    IS 5536 : 1969 Specification for constant flow type air-permeability apparatus (Lea and Nurse type)
    IS 5539 : 1969 Specification for preservative treated plywood
    IS 5540 : 1970 Specification for Pliers, Band Forming, Dental
    IS 5541 : 1970 Specification for Spatula, Plastics, Clear and Colorless, Dental
    IS 5542 : 2003 Guide for Storm Analysis
    IS 5543 : 1970 Specification for Bains Marie for Use with LPG
    IS 5544 : 1970 Specification for Hot Food Cabinets for Use with LPG
    IS 5545 : 1977 Specification for Fog Lights for Automobiles
    IS 5546 : 1981 Specification for Distribution Caps and Rotor Arms for Automobiles
    IS 5547 : 1983 Application guide for capacitor voltage transformers
    IS 5548 : 1970 Specification for Lubricating Nipple Adaptors
    IS 5549 : 1970 Specification for Warfarin Bait Concentrates
    IS 5550 : 1970 Specification for Burfi
    IS 5551 : 1970 Specification for Warfarin-sodium, Technical
    IS 5552 : 1970 Specification for Warfarin, Technical
    IS 5553 : Part 1 : 1989 Reactors – Specification – Part 1 : General
    IS 5553 : Part 2 : 1990 Reactors: Part 2 Shunt reactors
    IS 5553 : Part 3 : 1990 Reactors: Part 3 Current limiting reactors and neutral earthing reactors
    IS 5553 : Part 4 : 1989 Reactors: Part 4 Damping reactors
    IS 5553 : Part 5 : 1989 Reactors: Part 5 Tuning reactors
    IS 5553 : Part 6 : 1990 Reactors: Part 6 Earthing transformers (Neutral couplers)
    IS 5553 : Part 7 : 1990 Reactors: Part 7 Arc supression reactors
    IS 5553 : Part 8 : 1990 Reactors: Part 8 Smoothing reactors
    IS 5554 : 1991 Lock washers with lug – Specification
    IS 5555 : 1970 Code of procedure for conducting field studies on atmospheric corrosion of metals
    IS 5556 : 1991 Serrated Lock Washers – Specification
    IS 5557 : 1999 Safety Rubber Boots – Specification
    IS 5558 : 1970 Specification for Chicken Essence
    IS 5559 : 1984 Specification for Oilers
    IS 5560 : 1970 Specification for Compounded Feeds for Young Stock
    IS 5561 : 1970 Specification for Electric Power Connectors
    IS 5562 : 2000 Automotive Vehicles – Fuel Gauges – Cross Coil Movement Type – Specification
    IS 5563 : 1985 Specification for Screw Conveyors for Industrial Use
    IS 5565 : Part I : 1969 Specification for Dental Brushes, Engine – Part I : Brushes for Use with Straight and Right-angle Hand Pieces
    IS 5565 : Part II : 1969 Specification for Dental Brushes, Engine – Part II : Brushes for use with Porte Polisher
    IS 5566 : 1970 Specification for Vegetable Fibre Base Jointing Material
    IS 5567 : 1970 Specification for Bottles for Sterilized Milk
    IS 5568 : 1978 Dimensions for tenons and cross-slots for tools with taper bore 1:30
    IS 5569 : 1970 Specification for Cork and Cellulose Base Jointing Material
    IS 5570 : 1987 Specification for Pickled Goat Skins
    IS 5571 : 2000 Guide for Selection of Electrical Equipment for Hazardous Areas
    IS 5572 : 1994 Classification of hazardous areas (other than mines) having flammable gases and vapours for electrical installation
    IS 5573 : 1984 Specification for Ethylene Oxide
    IS 5574 : 1970 Specification for Forceps, Wire Cutting, Compound Action, Orthopaedic
    IS 5575 : Part I : 1970 Specification for Temperature Control Devices for Quartz Crystal Units (Heating Type) – Part I : General IS 5575 : Part 2 : 1978 Specification for Temperature Control Devices for Quartz Crystal Units (Heating Type) – Part 2 : Pin Connections IS 5576 : 1985 Specification for Carriers, Amalgam, Dental, No. 1 and 2
    IS 5577 : 2000 Automotive Vehicles – Ammeters – Specification
    IS 5578 : 1984 Guide for marking of insulated conductors
    IS 5579 : 1985 Specification for Neon Testers
    IS 5580 : 1970 Specification for Chisels, Stille Pattern, Orthopaedic
    IS 5581 : 1970 Specification for Stirrup, Bohler’s
    IS 5582 : 1986 Specification for Mandrels, Dental, No, 1, 2 and 3
    IS 5583 : 1970 Specification for Osteotomes, Stille Pattern, Orthopedic
    IS 5584 : 1970 Specification for Syringe, Hypodermic, Cartridge, Dental, Pivot Breech Cap Type
    IS 5585 : 1970 Specification for Mallet, Rubber-capped
    IS 5586 : 1970 Specification for Metal Component for Sectional Forearm
    IS 5588 : 1970 Specification for Quadriceps Boots
    IS 5589 : 1970 Specification for Saw Handle, Bone Amputation, Orthopaedic
    IS 5590 : 1970 Specification for Saw Blade, Bone Amputation
    IS 5591 : 1969 Specification for Chlorobenzene
    IS 5592 : 1981 Specification for Monochloroacetic Acid
    IS 5593 : 1980 Specification for Belt Fasteners (Alligator Type)
    IS 5594 : 1983 Specification for Wrist Unit, Rotary, for Hand Prosthests
    IS 5596 : 1970 Method of test for determining deleterious substances in fibrous insulating materials
    IS 5597 : 1970 Specification for Leather for Boxing Gloves
    IS 5598 : 1986 Code of Practice for Bale Coating, Packing and Marking of Natural Rubber
    IS 5599 : 1999 Rubber – Raw, Natural and Synthetic – Methods for Sampling and Sample Preparation
    IS 5600 : 2002 Pumps – Sewage and Drainage – Specification
    IS 5601 : 1970 Specification for Gouges, Stille Pattern, Orthopedic
    IS 5602 : 1970 Specification for Anaesthetic Breathing Bags
    IS 5603 : 1983 Specification for Mechanical Elbow Joint
    IS 5604 : 1984 Specification for Hand-operated Universal Gearless Pulling and Lifting Machines
    IS 5606 : 1970 Specification for Steel Bins for Grain Storage
    IS 5607 : 1970 Specification for Semi-automatic Elbow Joint
    IS 5608 : Part 1 : 1991 Specification for Low-Frequency Cables and Wires with PVC Insulation and PVC Sheath – Part 1 : General IS 5608 : Part 2 : 1970 Specification for Low-Frequency Wires and Cables with PVC Insulation and PVC Sheath – Part 2 : Equipment IS 5608 : Part 3 : 1976 Specification for Low Frequency Wires and Cables with PVC Insulation and PVC Sheath – Part 3 : Equipment IS 5608 : Part 4 : 2000 Specification for Low Frequency Wires and Cables with PVC Insulation and PVC Sheath – Part 4 : Cables IS 5608 : Part V : 2002 Low Frequency Wires and Cables with PVC Insulation and PVC Sheath – Specification – Part V : Signalling IS 5608 : Part 6 : 2001 Specification for Low Frequency Wires and Cables with PVC Insulation and PVC Sheath – Part 6 : Jumper IS 5609 : 1983 Specification for Leather for Hockey Ball
    IS 5610 : 1993 Chlorofluoro hydrocarbons of the methane and ethane series
    IS 5611 : 1987 Code of Practice for Construction of Waste Stabilization Ponds (Faculative Type)
    IS 5612 : Part 1 : 1977 Specification for hose-clamps and hose-bandages for fire brigade use: Part 1 Hose-clamps
    IS 5612 : Part 2 : 1977 Specification for hose-clamps and hose bandages for fire brigade use: Part 2 Hose bandages
    IS 5613 : Part 1 : Sec 1 : 1985 Code of Practice for Design, Installation and Maintenance of Overhead Power Lines – Part 1 : Lines IS 5613 : Part 1 : Sec 2 : 1985 Code of practice for design, installation and maintenance of overhead power lines: Part 1 Lines IS 5613 : Part 2 : Sec 1 : 1985 Code of practice for design, installation and maintenance of overhead power lines: Part 2 Lines IS 5613 : Part 2 : Sec 2 : 1985 Code of practice for design, installation and maintenance of overhead power lines: Part 2 Lines IS 5613 : Part 3 : Sec 1 : 1989 Code of Practice for Design, Installation and Maintenance for Overhead Power Lines – Part 3 : 400 IS 5613 : Part 3 : Sec 2 : 1989 Code of Practice for Design, Installation and Maintenance of Overhead Power Lines – Part 3 : 400 IS 5614 : 1980 Specification for Tobaccoseed Oil
    IS 5616 : 1982 Short link chain for lifting purposes general conditions of acceptance
    IS 5618 : 1970 Specification for Circular Thread Cutting Dies for Conduit Threads
    IS 5620 : 1985 Recommendations for Structural Design Criteria for Low Head Slide Gates
    IS 5621 : 1980 Hollow insulators for use in electrical equipment
    IS 5622 : 1970 Specification for Soda-Lime Canisters for Use with Gas Anaesthetic Apparatus ( Waters’ to-and-Fro)
    IS 5623 : 1999 Method for Determination of Co-efficient of Linear Thermal Expansion of Glass
    IS 5624 : 1993 Foundation bolts – Specification
    IS 5625 : 1970 Specification for Cast Cruciform Bollards
    IS 5626 : 1990 Chain conveyors – Connector units, shackle type – Specification
    IS 5627 : 1987 Methods of measurements of radar and oscilloscope on cathode-ray display tubes
    IS 5628 : 1970 Specification for Cast Deck-end Rollers
    IS 5630 : 1994 Cribs (Cradles), Maternity – Specification
    IS 5631 : 1970 Specification for Trolley, Instrument, Plain and Curved
    IS 5632 : 1970 Specification for Wolframite Concentrate
    IS 5633 : 1973 Vanadium pentoxide
    IS 5634 : 1987 Molybdenum oxide (technical)
    IS 5635 : 1983 Specification for Automotive V-Belt Drives
    IS 5636 : 1970 Specification for Cans for 16 mm Projector Spools
    IS 5637 : 1970 Specification for Watermelon Seed Oil
    IS 5638 : 1970 Specification for Acid Oil (Cottonseed and Groundnut)
    IS 5639 : 1970 Specification for Pumps Handling Chemicals and Corrosive Liquids
    IS 5640 : 1970 Method of test for determining aggregate impact value of soft coarse aggregates
    IS 5641 : 1993 Textile floor covering – Hand-made wool carpets – Specification
    IS 5642 : 1991/ISO 2738 : 1987 Permeable sintered metal materials – Determination of density,oil content,and open porosity
    IS 5643 : 1999 Tobacco and Tobacco Products – Methods of Test for Tobacco
    IS 5644 : Part 1 : 1993/ISO 4491-1 : 1989 Metallic Powders – determination of Oxygen Content by Reduction Methods – Part 1 IS 5644 : Part 2 : 1993/ISO 4491-2 : 1989 Metallic Powders – determination of Oxygen Content by Reduction Methods – Part 2 IS 5644 : Part 3 : 1993/ISO 4491-3 : 1989 Metallic Powders – determination of Oxygen Content by Reduction Methods – Part 3 IS 5644 : Part 4 : 1993/ISO 4491-4 : 1989 Metallic Powders – determination of Oxygen Content by Reduction Methods – Part 4 IS 5645 : 1970 Specification for Pedestal Cuspidor
    IS 5646 : 1970 Specification for p-Anisidine
    IS 5647 : 1970 Specification for p-Toluidine
    IS 5648 : 1970 Specification for O-anisidine
    IS 5649 : 1983 Specification for 2-Toluidine
    IS 5650 : 1988 Specification for Clips, Paper
    IS 5651 : 1987 Specification for Steels for Pneumatic Tools
    IS 5652 : Part 1 : 1993 /ISO 3738-1 : 1982 Hardmetals – Rockwell Hardness Test (Scale A) – Part 1 : Test Method
    IS 5653 : 1988 Specification for Pins, Paper, Straight
    IS 5654 : Part I : 1970 Specification for Feeds for Laboratory Animals – Part I : Rats and Mice
    IS 5654 : Part II : 1970 Specification for Feeds for Laboratory Animals – Part II : Guinea Pigs
    IS 5654 : Part 3 : 1983 Specification for Feeds for Laboratory Animals – Part 3 : Monkeys
    IS 5657 : 1970 Specification for Jim Crows
    IS 5658 : 1990 Snipe Nose Pliers – Specification
    IS 5659 : 1970 Specification for Pumps for Process Water
    IS 5661 : 1970 Code of practice for packing and marking of packages of paints, enamels, varnishes and allied products
    IS 5662 : 1991 Specification for TV Aerial Feeder Cables
    IS 5663 : 1970 Specification for Brick and Mason’s Chisels
    IS 5664 : 1970 Specification for Lubricating Connectors
    IS 5665 : 1982 Specification for Shoulder Wheel
    IS 5666 : 1970 Specification for Etch (Pretreatment) Primer
    IS 5667 : 1970 Thinner for cellulose nitrate based paints and lacquers
    IS 5668 : 1989 Eye surgery instruments – Forceps, eye dissecting, serrated, fine – Specification
    IS 5669 : 1987/ISO 15 : 1981 General plan of boundary dimensions for radial rolling bearings
    IS 5670 : 1984 Specification for Lead Thiocyanate for Explosive and Pyrotechnic Compositions
    IS 5671 : 1984 Specification for Strontium Nitrate for Pyrotechnic Compositions
    IS 5672 : 1992 Mineral Mixtures for Supplementing Poultry Feeds – Specification
    IS 5673 : 1970 Methods of tests for still projectors
    IS 5674 : 1970 16 mm projector spools
    IS 5675 : 1987 Specification for Rotary-disc Vacuum Filters
    IS 5676 : 1995 Moulded solid rubber soles and heels – Specification
    IS 5677 : 1986 Specification for Shoe Upper Leather for Direct Moulding Processes
    IS 5678 : 1970 Specification for Forceps, Eye, Conjunctival, Suture (Moorfield’s Pattern)
    IS 5679 : 1986 Miners’ cap lamp assemblies (incorporating lead acid type batteries)
    IS 5680 : 1969 Specification for Rubber Tubing for Medical Use
    IS 5681 : 1992 General meteorological thermometers, liquid-in-glass
    IS 5682 : 1991 Open top drums and kegs
    IS 5683 : 1970 Specification for Brushes, Push-Sweeping (Without Handle)
    IS 5684 : 1970 Specification for Pipe Vices (Chain Type)
    IS 5685 : 1970 Code of Safety for Carbon Disulphide (Carbon Bisulphide)
    IS 5686 : 1970 Code of Practice for Handling and Storage of Oilseeds
    IS 5687 : 1970 Glossary of terms relating to welding of plastics
    IS 5688 : 1982 Methods of test for preformed block-type and pipe covering type thermal insulation
    IS 5689 : 1981 Specification for Ankle Derby Boots
    IS 5690 : 1982 Guide for laying combination lining for existing unlined canals
    IS 5691 : 1970 Specification for Lacquer Cellulose Nitrate, Pigmented, Finishing, Glossy
    IS 5692 : 1988 Tolerances for radial rolling bearings
    IS 5693 : 1988 Specification for Countersinks 90°, with Parallel Shanks and Solid Pilots
    IS 5694 : 1979 Specification for Engineers’ Drawing Instruments, Dotting Pens
    IS 5695 : 1970 Specification for Spectacle Lenses
    IS 5697 : 1970 Specification for Ripping Chisels
    IS 5698 : 1970 Specification for Rotary Form-relieved Gear Cutters for Spur and Helical Gears
    IS 5699 : 1970 Method for chill testing of cast iron
    IS 5700 : 1977 Cinematograph screens
    IS 5701 : Part 1 : 1981 Code for breeding, care, management and housing of laboratory animals: Part 1 Laboratory mice and rats
    IS 5701 : Part 2 : 1979 Code for breeding, care, management and housing of laboratory animals: Part 2 Laboratory rabbits
    IS 5701 : Part 3 : 1979 Code for breeding, care, management and housing of laboratory animals: Part 3 Laboratory guinea-pigs
    IS 5701 : Part 4 : 1979 Code for breeding, care, management and housing of laboratory animals: Part 4 Laboratory golden hamsters
    IS 5701 : Part 5 : 1972 Code for breeding, care, management and housing of laboratory animals: Part 5 Laboratory snakes
    IS 5701 : Part 6 : 1981 Code for breeding, care, management and housing of laboratory animals: Part 6 Laboratory cotton rats IS 5701 : Part 7 : 1977 Code for breeding, care, management and housing of laboratory animals: Part 7 Laboratory frogs
    IS 5701 : Part 8 : 1979 Code for breeding, care, management and housing of laboratory animals: Part 8 Laboratory chicks
    IS 5701 : Part 9 : 1979 Code for breeding, care, management and housing of laboratory animals: Part 9 Laboratory pigeons
    IS 5701 : Part 10 : 1981 Code for breeding, care, management and housing of laboratory animals: Part 10 Laboratory mosquitoes
    IS 5702 : 1970 Specification for Flat Thread Rolling Dies
    IS 5703 : 1988 Specification for Countersinks 90 with Morse Taper Shanks and Detachable Pilots
    IS 5704 : 1988 Specification for Counterbores with Parallel Shanks and Solid Pilots
    IS 5705 : 1988 Specification for Detachable Pilots for Use with Counterbores and Countersink 90°
    IS 5706 : 1993 Optical instruments – Spirit levels for use in precision engineering – Specification
    IS 5707 : 1996 Agar, Food Grade – Specification
    IS 5708 : 1996 Sodium Tartrate, Food Grade – Specification
    IS 5709 : 1997 Calcium Saccharin, Food Grade – Specification
    IS 5710 : 1988 Specification for Counterbores with Morse Taper Shanks and Detachable Pilots
    IS 5711 : 1970 Vulcanized fibre rods and tubes for electrical purposes
    IS 5712 : 1970 Specification for Slickers for Leather Industry
    IS 5713 : 1981 Specification for Manganese Dioxide for Explosive and Pyrotechnic Compositions
    IS 5714 : 1981 Specification for Hydrant Stand-Pipe for Fire Fighting
    IS 5715 : 1986 Glass carboys
    IS 5717 : 2003 Laboratory Glassware – Pyknometers
    IS 5718 : 2000 Agricultural Produce Processing Equipment – Seed Cleaners – Test Code
    IS 5719 : 1970 Specification for Gelatin, Food Grade
    IS 5720 : 1970 Specification for Retractor, Mastold, Self-Retaining (Mollison’s pattern)
    IS 5721 : 1970 Specification for Forceps, Eye, Peripheral Iridectomy (Sinclair’s pattern)
    IS 5722 : 1970 Specification for Hook, Eye, Iris (Tyrrell’s Pattern)
    IS 5723 : 1970 Specification for Mallet with Fluted Handle for ENT Surgery
    IS 5724 : 1970 Methods of test for thermal insulating cements
    IS 5725 : 1970 Psychrometers, unventilated (dry and wet bulb hygrometers)
    IS 5726 : 1970 Specification for Engineers’ Drawing Instruments, Bordering Pens
    IS 5727 : 1981 Glossary of Terms Relating to Compressors and Exhausters
    IS 5730 : 1970 Specification for volatile corrosion inhibitor powder
    IS 5731 : 1970 Antimony sulphide for explosive and pyrotechnic compositions
    IS 5732 : 1970 Specification for Gouge, Mastoid (Jenkins’ Pattern)
    IS 5734 : 1970 Specification for Sardine Oil
    IS 5737 : 1970 Specification for Engineers’ Drawing Instruments, Curve Pens
    IS 5738 : 1970 Specification for Cystoscope
    IS 5739 : 1970 Specification for Track and Field Equipment (Sports Goods for Schools)
    IS 5740 : 1996 Household Sewing Machines – Memorandum on screw threads for sewing machine components
    IS 5741 : 1970 Method for determination of pH
    IS 5742 : Part 1 : 1970 Terms and symbols for sieve bottoms: Part I Woven and welded wire screens
    IS 5742 : Part 2 : 1970 Terms and symbols for sieve bottoms: Part II Perforated plates
    IS 5743 : 1991 Copper master alloys -
    IS 5744 : 1991 Copper alloy screwed ferrules for condenser, heater and cooler tubes
    IS 5745 : 1986 Specification for Heel Socket and Plate for Orthosis
    IS 5746 : Part 1 : 1987 Specification for Woven Glass Fibre Fabrics Plastic Laminates for Aerospace Purposes – Part 1 : Loom-IS 5746 : Part 2 : 1987 Specification for Woven Glass Fibre Fabrics for Plastic Laminates for Aerospace Purposes – Part 2 : Desized IS 5746 : Part 3 : 1987 Specification for Woven Glass Fibres Fabric for Plastic Laminates for Aerospace Purposes – Part 3 : Finished IS 5747 : 1970 Specification for Retractor, Endaural (Lempert’s Pattern)
    IS 5748 : 1969 Methods of test for tensile strength of asbestos fibre
    IS 5749 : 1970 Specification for Forged Ramshorn Hooks
    IS 5750 : 1970 Specification for Sigmoidoscope
    IS 5751 : 1984 Specification for Precast Concrete Coping Blocks
    IS 5752 : 1970 Specification for Yara Yara
    IS 5753 : 1993 Alpha-amyl Cinnamic Aldehyde – Specification
    IS 5754 : 1988 Phenyl Acetic Acid, Perfumery Grade – Specification
    IS 5756 : 1970 Code for packaging of carpets
    IS 5757 : 1992 Oil of Pine – Specification
    IS 5758 : 1984 Specification for Precast Concrete Kerbs, Channels, Edgings, Quadrants and Gutter Aprons
    IS 5759 : 1994 Antifreeze Coolant – Specification
    IS 5760 : 1998 Argon, compressed and liquid – Specification
    IS 5761 : Part 1 : 1984 Specification for Gold Cyanide and Gold Potassium Cyanide for Electroplating – Part 1 : for Commercial/IS 5761 : Part 2 : 1984 Gold cyanide and gold potassium cyanide for electroplating : Part 2 For special applications
    IS 5762 : 1970 Methods for Determination of Melting Point and Melting Range
    IS 5763 : 1970 Specification for Occlusal Plane Guide, Dental
    IS 5764 : 1994 Bowls, Solution – Specification
    IS 5766 : 1970 Code of practice for laying of burnt clay brick flooring
    IS 5767 : 1970 Glossary of mining terms (strata control)
    IS 5768 : 1970 Glossary of Mining Terms (Winning and Working)
    IS 5776 : 1988 Specification for Bulk Water Heater for Use with LPG
    IS 5777 : 1970 Specification for Fryers for Use with LPG
    IS 5778 : 1970 Still projectors
    IS 5779 : 1986 Specification for burnt clay soling bricks
    IS 5780 : 2002 Electrical Apparatus for Explosive Gas Atmospheres – Intrinsic Safety “i” – Specification
    IS 5781 : 1993 /ISO 1026 : 1982 Fruit and Vegetable Products – Determination of Dry Matter Content by Drying Under Reduced IS 5782 : 1994 Bowls, Sponge – Specification
    IS 5784 : 2001 Shaving Soap – Specification
    IS 5785 : Part I : 1970 Methods for performance tests for surface active agents – Part 1 : relative dispersing power
    IS 5785 : Part II : 1970 Methods for Performance Tests for Surface Active Agents – Part II : Relative Emulsifying Power
    IS 5785 : Part III : 1970 Methods for Performance Tests for Surface Active Agents – Part III : Foaming Power
    IS 5785 : Part IV : 1976 Methods for Performance Tests for Surface Active Agents – Part IV : Relative Detergency
    IS 5785 : Part V : 1981 Methods for Performance Tests for Surface Active Agents – Part V : Wetting Power
    IS 5786 : Part I : 1978 Specification for Fixed Resistors General Purpose, Low Power – Part I : General Requirements and Methods IS 5786 : Part 3 : 1982 Specification for Fixed Resistors General Purpose, Low Power – Part 3 : Resistors Type FRLP 2
    IS 5786 : Part IV : 1982 Specification for Fixed Resistors General Purpose, Low Power – Part IV : Resistors Type FRLP 3
    IS 5786 : Part V : 1982 Specification for Fixed Resistors General Purpose, Low Power – Part V : Resistors Type FRLP 4
    IS 5786 : Part VI : 1982 Specification for Fixed Resistors, General Purposes, Low Power – Part VI : Resistors Type FRLP 5
    IS 5786 : Part 7 : 1982 Specification for Fixed Resistors, General Purpose, Low Power – Part 7 : Resistor Type FRLP 6
    IS 5786 : Part X : 1982 Specification for Fixed Resistors, General Purpose, Low Power – Part X : Resistors Type FRLP 9
    IS 5786 : Part XII : 1982 Specification for Fixed Resistors, General Purpose, Low Power – Part XII : Resistors Type FRLP 11
    IS 5787 : 1986 Spheroidal or nodular graphite iron castings for paper mill dryer rolls
    IS 5788 : 1986 Iron castings with spheroidal or nodular graphite for pressure containing parts for use at elevated temperatures
    IS 5789 : 1993 Austenitic Spheroidal Graphite Iron Castings for Pressure Containing Parts Suitable for Low-Temperature Service IS 5790 : 1985 Domestic electric cooking ovens
    IS 5791 : 1986 Technical Supply Conditions for Piston Rings for Internal Combustion Engines
    IS 5793 : 1970 Specification for Aneroid Barometers
    IS 5794 : 1986 Specification for Pliers, Pin-roughening and Bending, Dental
    IS 5795 : 1991 Orthodontic pliers, Crown and ligating, Howe’s pattern – Shape, dimensions and tests
    IS 5796 : 1970 Specification for Disc Type Weight Set for Physio-Therapy Exercisers Other than Pulley Arrangements
    IS 5797 : 1994 Rubber hose for aircraft refuelling and defuelling – Specification ( Revision)
    IS 5798 : 1970 Specification for Mercury Barometers
    IS 5799 : 1970 Specification for Windvane
    IS 5800 : 1970 Specification for Orange Juice
    IS 5801 : Part I : 1970 Specification for Flexible Coaxial Radio Frequency Cables with Characteristic Impedance 50 – Part I : Cable IS 5801 : Part 2 : 1970 Specification for Flexible Coaxial Radio Frequency Cables with Characteristic Impedance 50 – Part 2 : Cable IS 5801 : Part 3 : 1970 Specification for Flexible Coaxial Radio Frequency Cables with Characteristic Impedance 50 – Part 3 Cable IS 5802 : Part I : 1970 Specification for Flexible Coaxial Radio Frequency Cables with Characteristic Impedance 75 – Part I : Cable IS 5802 : Part 2 : 1975 Specification for Flexible Coaxial Radio Frequency Cables with Characteristic Impedance 75 – Part 2 : Cable IS 5803 : 1970 Specification for Twist Drill Used in Orthopaedic Surgery
    IS 5804 : 1987 Specification for Poultry Debeakers
    IS 5805 : 1993 Ink, Ball Point Pen Refill – Specification
    IS 5806 : 1970 Specification for Non-coniferous Timber in Converted form for Ammunition/Explosives Boxes
    IS 5807 : Part 1 : 1975 Methods of test for clear finishes for wooden furniture: Part 1 Resistance to dry heat
    IS 5807 : Part 2 : 1975 Methods of test for clear finishes for wooden furniture: Part 2 Resistance to wet heat
    IS 5807 : Part 3 : 1971 Methods of test for clear finishes for wooden furniture: Part 3 Resistance to marking by oils and fats
    IS 5807 : Part 4 : 1975 Methods of test for clear finishes for wooden furniture: Part 4 Resistance to marking by liquids
    IS 5807 : Part 5 : 1975 Methods of test for clear finishes for wooden furniture: Part 5 Test for low angle glare
    IS 5807 : Part VI : 1978 Methods of Test for Clear Finishes for Wooden Furniture – Part VI : Resistance to Mechanical Damage
    IS 5809 : 1986 Specification for Ankle Joint for Orthosis
    IS 5810 : 1986 Specification for Knee Joint with Lock for Orthosis
    IS 5812 : 1970 Specification for Optical Bevel Protractors
    IS 5813 : 1970 Method for determination of crystallizing point
    IS 5814 : 1970 Glossary of mining terms (shaft and associated equipment)
    IS 5815 : Part 1 : 1971 Methods of test for fishing gear materials Part 1 Determination of thickness
    IS 5815 : Part 2 : 1970 Methods of test for fishing gear materials Part 2 Determination of linear density (mass per unit length)
    IS 5815 : Part 3 : 1970 Methods of test for fishing gear materials Part 3 Determination of twist
    IS 5815 : Part 4 : 1993/ISO 1805 : 1973 Fishing nets: Determination of breaking load and knot breaking load of netting yarns
    IS 5815 : Part 5 : 1993/ISO 1806 : 1973 Fishing nets – Determination of mesh breaking of netting
    IS 5815 : Part 6 : 1993/ISO 3090 : 1974 Netting yarns – Determination of change in length after immersion in water
    IS 5815 : Part 7 : 1993/ISO 3790 : 1976 Fishing nets – Determination of elongation of netting yarns
    IS 5815 : Part 8 : 1988 Methods of Test for Fishing Gear Materials – Part 8 : Determination of Sinking Speed
    IS 5815 : Part 9 : 1994 Finishing gear materials- Method of test Part 9 Determination of weathering resistance.
    IS 5816 : 1999 Splitting Tensile Strength of Concrete Method of Test
    IS 5817 : 1992 Code of practice for preparation and use of lime-pozzolana mixture concrete in buildings and roads
    IS 5819 : 1970 Recommended Short-circuit Ratings of High Voltage PVC Cables
    IS 5820 : 1970 Specification for precast concrete cable cover
    IS 5821 : 1986 Specification for Hot-water Hose of Rubber
    IS 5822 : 1994 Code of Practice for Laying of Electrically Welded Steel Pipes for Water Supply
    IS 5823 : 1986 Specification for Dining Tables
    IS 5824 : 1970 Lancets for use in foundries
    IS 5825 : 1993/IEC PUB 172 : 1987 Test procedure for the determination of the temperature index of enamelled winding wires
    IS 5827 : 1982 Specification for Paraffin Wax Bath
    IS 5828 : 1991 Orthodontic pliers, workroom – Shape, dimensions and tests
    IS 5829 : 1982 Specification for Sound, Uterine
    IS 5830 : 1970 Dimensions for transmission coupling (slip-joint) to dental handpieces
    IS 5831 : 1984 PVC insulation and sheath of electric cables
    IS 5832 : 1984 Specification for Black Pepper Eleoresin
    IS 5833 : 1970 Specification for Flameproof Air-break Electrically Operated Gate-end Boxes
    IS 5834 : Part 1 : 1994 Electrical Timer Relays for Industrial Purposes – Specification – Part 1 : Pneumatic
    IS 5834 : Part 2 : 1993 Electrical Timer Relays for Industrial Purposes – Specification – Part 2 : Motorized
    IS 5834 : Part III : 1981 Specification for electrical timber relays industrial purposes – Part III : Electronic
    IS 5835 : 1970 Method for estimation of Vitamin D in foodstuffs
    IS 5836 : 1977 Specification for Inner Wire Ropes for Automobile Control Cables
    IS 5837 : 1970 Code for hygienic conditions for soft drink manufacturing units
    IS 5838 : 1970 Methods for estimation of Vitamin C in foodstuffs
    IS 5839 : 2000 Food Hygiene – Code of Practice for Manufacture, Storage and Sale of Ice Cream
    IS 5840 : Part 1 : 1970 Dimensions of cathode-ray tubes: Part 1 Tube out-lines
    IS 5840 : Part 2 : 1970 Dimensions of cathode-ray tubes: Part 2 Bases
    IS 5840 : Part 3 : 1970 Dimensions of cathode-ray tubes: Part 3 EHT terminals
    IS 5841 : 1970 Flutted core cleaners for use in foundries
    IS 5842 : 1986 Method for Measuring Bulk Density of Iron Oxides: Lump Ores, Sinter and Pellets
    IS 5844 : 1970 Recommendations for Hydrostatic Stretch Testing of Compressed Gas Cylinders
    IS 5845 : 1993 Code of practice for inspection of low pressure welded steel gas cylinders other than LPG cylinders in use
    IS 5846 : 1970 Specification for Nails, Bone (Smith Petersen and Watson Jones Patterns)
    IS 5847 : 1970 Specification for Pin Chuck for Introducing Steinman Pins
    IS 5848 : 1996 /ISO 5838-2 : 1991 Implants for Surgery – Skeletal Pins and Wires – Steinmann Skeletal Pins – Dimensions
    IS 5849 : 1970 Specification for Retractor, Anterior Vaginal Wall (Sim’s pattern)
    IS 5850 : 1970 Star (triangular) cutters for use in foundries
    IS 5852 : 1996 Protective steel toe caps for footwear – Specification
    IS 5856 : 1991 Corrosion and heat resisting chromium-nickel steel solid welding rods, bare electrodes
    IS 5857 : 1970 Nickel and nickel alloy bare solid welding rods and electrodes
    IS 5858 : Part I : 1970 Specification for Accessories to Mechanical Ventilation Systems on Board Ships – Part I : Non-return Valves
    IS 5858 : Part II : 1970 Specification for Accessories to Mechanical Ventilation Systems on Board Ships – Part II : Smoke Protecting IS 5858 : Part III : 1970 Specification for Accessories to Mechanical Ventilation Systems on Board Ships – Part III : Control Dampers
    IS 5859 : 1970 Specification for Tools for Handling of Anchor Chains and Attachments
    IS 5860 : 1970 Table and inter-conversion charts for ethanol-water mixtures
    IS 5861 : 1993 Jams, Jellies and Marmalades – Specification
    IS 5862 : 1970 Specification for Solvent Extracted Nigerseed Oilcake (Meal) as Livestock Feed
    IS 5863 : 1985 Method for determination of malathion residues in food commodities
    IS 5864 : 1983 Method for Determination of DDT Residues in Food Commodities
    IS 5866 : 1979 Specification for Chrome Leather for High Altitude Gloves
    IS 5867 : 1970 Specification for Leatherboards for Insoles
    IS 5868 : 1983 Method of Sampling for Leather
    IS 5869 : 1970 Specification for Pillar Taps for Marine Use
    IS 5870 : 1970 Specification for Glass Globes for Internal Lighting of Passenger Coaches
    IS 5871 : 1987 Specification for bitumen mastic for tanking and damp-proofing_
    IS 5872 : 1990 Cold Rolled Steel Strips (Box Strappings) – Specification
    IS 5873 : 1970 Steel cut-wire shots for use in foundries
    IS 5874 : 1970 Specification for Grading of Viscose Rayon Cut Staple Fibres (Regular)
    IS 5875 : 1970 Specification for Open-deck Scuppers
    IS 5876 : 1970 Specification for Hopper Scuppers
    IS 5877 : 1971 Barium sulphide, technical (black ash)
    IS 5878 : Part I : 1971 Code of Practice for Construction of Tunnels – Part I : Precision Survey and Setting Out
    IS 5878 : Part II : Sec 1 : 1970 Code of Practice for Construction of Tunnels – Part II : Underground Excavation in Rock – Section IS 5878 : Part II : Sec 2 : 1971 Code of Practice for Construction of Tunnels – Part II : Underground Excavation in Rock – Section IS 5878 : Part II : Sec 3 : 1971 Code of Practice for Construction of Tunnels Conveying Water – Part II : Underground Excavation IS 5878 : Part III : 1972 Code of Practice for Construction of Tunnels – Part III : Underground Excavation in Soft Strata
    IS 5878 : Part 4 : 1971 Code of practice for construction of tunnels conveying water: Part 4 Tunnel supports
    IS 5878 : Part 5 : 1976 Code of practice for construction of tunnels conveying water: Part 5 Concrete lining
    IS 5878 : Part 6 : 1975 Code of practice for construction of tunnel conveying water: Part 6 Steel lining
    IS 5878 : Part 7 : 1972 Code of practice for construction of tunnels conveying water: Part 7 Grouting
    IS 5879 : 1970 Specification for Punch, Rubber Dam, Dental
    IS 5880 : 1970 Specification for Stand, Saline-Cum-Irrigator
    IS 5881 : 1984 Specification for Taper Pin Hand Reamers
    IS 5882 : 1970 Specification for Socket Reamers with Parallel Shanks
    IS 5883 : 1970 Nickel resistance thermometer elements
    IS 5884 : 1993 Textile floor covering – Tufted carpets – Specification
    IS 5885 : 1977 Copper for commutator bars
    IS 5886 : 1970 Methods for estimation of carotenes and Vitamin A (Retinol) in foodstuffs
    IS 5887 : Part I : 1976 Methods for Detection of Bacteria Responsible for Food Poisoning – Part I : Isolation, Identification and Enumeration IS 5887 : Part 2 : 1976 Methods for detection of bacteria responsible for food poisoning:Part 2 Isolation, identification and enumeration IS 5887 : Part 3 : 1999 /ISO 6579 : 1993 Methods for Detection of Bacteria Responsible for Food Poisoning – Part 3 : General Guidance IS 5887 : Part IV : 1976 Methods for Detection of Bacteria Responsible for Food Poisoning Part IV : Isolation and Identification IS 5887 : Part 5 : 1976 Methods for detection of bacteria responsible for food poisoning :Part 5 Isolation, identification and enumeration IS 5887 : Part 6 : 1999 /ISO 7932 : 1993 Methods for Detection of Bacteria Responsible for Food Poisoning – Part 6 : Identification, IS 5887 : Part 7 : 1999 Methods for Detection of Bacteria Responsible for Food Poisoning – Part 7 : General Guidance on Methods IS 5887 : Part 8 : Sec 1 : 2002/ISO 6888-1 : 1999 Methods for Detection of Bacteria Responsible fo Food Poisoning – Part 8 : Horizontal IS 5887 : Part 8 : Sec 2 : 2002 /ISO 6888-2 : 1999 Methods for Detection of Bacteria Responsible for Food Poisoning – Part 8 : IS 5888 : 1970 Code of practice for design and construction of fire service drill-tower
    IS 5889 : 1994 Vibratory plate compactor – Specification
    IS 5890 : 1970 Specification for mobile hot mix asphalt plants, light duty
    IS 5891 : 1970 Specification for hand-operated concrete mixer
    IS 5892 : 1970 Specification for concrete transit mixers and agitators
    IS 5893 : 1989 Cryolite for use in aluminium industry for the aluminium industry
    IS 5894 : 1980 Specification for Rubber Hose for Sand Blasting
    IS 5895 : 1985 Specification for Steel Roller Conveyors
    IS 5896 : Part I : 1970 Code of Practice for Selection, Operation and Maintenanace of Special Fire Fighting Appliance – Part I : IS 5896 : Part 3 : 1975 Code of practice for selection, operation and maintenance of special fire fighting appliances: Part 3 Turntable IS 5897 : 1985 Aluminium and aluminium alloy welding rods and wires and magnesium alloy welding rods
    IS 5898 : 1970 Specification for Copper and Copper Alloy Bare Solid Welding Rods and Electrodes
    IS 5899 : 1970 Specification for Bath-room Latches
    IS 5900 : 1970 Specification for Hair Hygrograph
    IS 5901 : 1970 Specification for Thermograph, Bimetallic
    IS 5903 : 1970 Recommendations for safety devices for gas cylinders
    IS 5904 : 1978 Steel chaplets for use in ferrous foundries
    IS 5905 : 1989 Sprayed aluminium and zinc coatings on iron and steel
    IS 5906 : 1970 Specification for Speculum, Vaginal (Cusco’s pattern)
    IS 5907 : 1970 Specification for Socket Reamers with Morse Taper Shanks
    IS 5910 : 1977 Fineness grades of wool
    IS 5911 : 1977 Fineness grades of wool tops
    IS 5912 : 1997 Specification for Anemometer, Cup Counter
    IS 5913 : 1989 Asbestos Cement Products – Methods of Test
    IS 5914 : 1970 Methods of physical testing of leather
    IS 5915 : 1970 Specification for Single Texture Rubberized Waterproof Fabrics
    IS 5916 : 1970 Safety code for construction involving use of hot bituminous materials
    IS 5917 : 1970 Specification for vitreous (vitreous china) wash basins for marine use
    IS 5918 : 1984 Specification for Taper Pin, Machine Reamers with Morse Taper Shanks
    IS 5919 : 1978 Specification for Machine Bridge Reamers
    IS 5920 : 1970 Recommendations for the Preparation of Drawings for Optical Elements and Systems
    IS 5921 : Part 1 : 1993 Specification for Metal-clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication IS 5921 : Part 2 : 1973 Specification for Metal-Clad Base Material for Printed Circuits for Use in Electronic and Telecommunication IS 5921 : Part 3 : 1978 Specification for Metal-Clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication IS 5921 : Part 4 : 1987 Specification for Metal-clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication IS 5921 : Part 5 : 1987 Specification for Metal Clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication IS 5921 : Part 6 : 1987 Specification for Metal Clad Base Materials for Use in Electronic and Telecommunication Equipment – Part IS 5921 : Part 7 : 1987 Specification for Metal Clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication IS 5921 : Part 8 : 1988 Specification for Metal-clad Base Materials for Printed Circuits for Use in Electronic and Telecommunication IS 5921 : Part 9 : 1988 Metal clad base materials for printed circuits for use in electronic and telecommunication equipment: Part IS 5921 : Part 10 : 1988 Metal clad base materials for printed circuits for use in electronic and telecommunication equipment:Part IS 5921 : Part 11 : 1988 Metal clad base materials for printed circuits for use in electronic and telecommunication equipment:Part IS 5921 : Part 12 : 1988 Metal clad base materials for printed circuits for use in electronic and telecommunication equipment: Part IS 5922 : 1970 Qualifying tests for welders engaged in aircraft welding
    IS 5923 : 1986 Specification for Wooden Clothes’ Lockers
    IS 5924 : 1988 Specification for Clock Mechanisms and Drums for Meteorological Instruments
    IS 5925 : 1970 Recommended practice for silver plating for general engineering purposes
    IS 5926 : 1970 Specification for Shell Reamers
    IS 5927 : 1981 Specification for Reduction Sleeves 7/24 Tapers to Morse Tapers
    IS 5928 : 1970 Specification for Tangent Clinometer
    IS 5929 : 1970 Inspection and testing procedure for circular steel tubes for aircraft purposes
    IS 5930 : 1970 Specification for mortice latch (vertical type)
    IS 5931 : 1970 Code of safety for handling cryogenic liquids
    IS 5932 : 1970 Boundary Dimensions for Thrust Ball Bearings with Flat Seats
    IS 5933 : 2002/ISO 199 : 1997 Rolling Bearings – Thrust Bearings – Tolerances
    IS 5934 : 1999 /ISO 582 : 1995 Rolling Bearings – Chamfer Dimensions – Maximum Values – Specification
    IS 5935 : 1992 Radial internal clearances in unloaded radial rolling bearings
    IS 5936 : 1981 Specification for Arbors with Morse Taper Shanks for Shell Tools
    IS 5939 : 1970 Specification for Single Angle Sine Tables
    IS 5940 : 1970 Glossary of mining terms (geology)
    IS 5941 : 1970 Specification for Dental Engine, Electric
    IS 5942 : 1989 Specification for wooden handles for POWRAHS
    IS 5943 : 1970 Specification for Compound Angle Sine Tables
    IS 5944 : 1971 Specification for Accessories for Use in Shuttles for Jute Looms
    IS 5945 : 1970 Specification for Barograph, Aneroid
    IS 5946 : 1992 Meteorology – Whirling psychrometer – Specification
    IS 5947 : 1970 Charts for recording meteorological instruments
    IS 5948 : 1970 Specification for Thermometer Screens
    IS 5949 : 1990 Methods for volumetric determination of calcium and magnesium using EDTA
    IS 5950 : 1984 Shot firing cables (for use other than in shafts)
    IS 5951 : 1985 Methods for determination of colour fastness of textile materials to weathering by outdoor exposure
    IS 5952 : 1970 Methods of test for the Estimation of parathion residues (To be withdrawn)
    IS 5953 : 1985 Specification for bauxite for use in the production of alumina
    IS 5954 : 1985 Dental white gold alloys
    IS 5955 : 1993 Spices and Condiments – Tamarind Concentrate – Specification
    IS 5956 : 1986 Specification for Hip Joint with Lock for Orthosis
    IS 5957 : 2003 /ISO 1478 : 1999 Screw Threads for Thread Forming Tapping Screws Dimensions
    IS 5958 : 1970 Specification for Reflector and Cheek Retractor, Dental
    IS 5960 : Part 1 : 1996/ISO 937 : 1978 Methods of test for meat and meat products: Part 1 Determination of nitrogen content
    IS 5960 : Part 2 : 2000/ISO 936 : 1998 Meat and Meat Products – Methods of Test – Part 2 : Determination of Total Ash
    IS 5960 : Part 3 : 1970 Methods of test for meat and meat products: Part 3 Determination of total fat content
    IS 5960 : Part 4 : 1997/ISO 1444 : 1996 Meat and meat products – Method of test : Part 4 Determination of free fat content
    IS 5960 : Part 5 : 2001 /ISO 1442 : 1997 Meat and Meat Products – Methods of Test – Part 5 : Determination of Moisture Content IS 5960 : Part 6 : Sec 1 : 1997/ISO 1841-1 : 1996 Meat and meat products – Method of test Part 6 Determination of chloride contentSection IS 5960 : Part 6 : Sec 2 : 1997/ISO 1841-2 : 1996 Meat and meat products – Method of Test Part 6 Determination of Chloride content IS 5960 : Part 7 : 1996/ISO 2918 : 1975 Methods of test for meat and meat products : Part 7 Determination of nitrite content
    IS 5960 : Part 8 : 1996/ISO 3091 : 1975 Methods of test for meat and meat products: Part 8 Determination of nitrate content
    IS 5960 : Part 9 : 1988 /ISO 2294 : 1974 Meat and Meat Products – Methods of Test – Part 9 : Determination of Total Phosphorus IS 5960 : Part 10 : 2001 /ISO 2917 : 1999 Meat and Meat Products – Methods of Test – Part 10 : Measurement of pH – Reference IS 5960 : Part 11 : 1988/ISO 4133 : 1979 Method of test for meat and meat products : Part 11 Determination of glucone-delta-lactone IS 5960 : Part 12 : 2001 /ISO 4134 : 1999 Meat and Meat Products – Methods of Test – Part 12 : Determination of L-(+)-Glutamic IS 5960 : Part 13 : 1988/ISO 5553 : 1980 Methods of test for meat and meat products : Part 13 Determination of polyphosphates
    IS 5960 : Part 14 : 1988/ISO 5554 : 1978 Methods of Test for Meat and Meat Products – Part 14 : Determination of Starch Content
    IS 5960 : Part 15 : 2000/ISO 3496 : 1994 Meat and Meat Products – Methods of Test – Part 15 : Determination of L (-) Hydroxyproline IS 5961 : 1970 Specification for cast iron gratings for drainage purposes
    IS 5963 : 1971 Specification for Knee Joint without Lock for Steel Orthopaedic Calipers
    IS 5964 : 1971 Specification for Round Spur for Orthopaedic Calipers
    IS 5965 : 1970 Specification for Frame, Rubber Dam, Dental
    IS 5966 : 1993 Specification for non-coniferous timber in converted form for general purposes
    IS 5967 : Part 1 : 1988 Methods of Test for Strength and Stability of Tables and Trolleys – Part 1 : Strength
    IS 5967 : Part 2 : 1988 Methods of test for strength and stability of tables and trolleys : Part 2 Stability
    IS 5968 : 1987 Guide for planning and layout of canal system for irrigation
    IS 5969 : 1992 Metal Polish, Paste – Specification
    IS 5970 : 1970 Method for estimation of strength (vat content) of solubilized vat dyestuffs
    IS 5971 : 1970 Specification for Cylindrical Strum Boxes
    IS 5972 : 1970 Glossary of pneumatic and hydraulic conveyor terms and definitions
    IS 5973 : 1998 Pan evaporimeter – Specification
    IS 5974 : 1986 Specification for divans and easy chairs
    IS 5975 : 1970 Specification for Raw Sugar
    IS 5976 : 1971 Specification for Ships’ Punkah-louvres
    IS 5977 : 1981 Specification for Regulators for Automobile dc Generators (Dynamos)
    IS 5978 : 1970 Code of Practice for Design of Wood Poles for Overhead Power and Telecommunication Lines
    IS 5979 : 1981 Specification for Sine Centres
    IS 5980 : 1978 Specification for Bench Centres
    IS 5981 : 1986 Sleekers for use in foundries
    IS 5982 : 1970 Specification for Plantation White Sugar for Identification from other Sugars
    IS 5983 : 1980 Eye-protectors
    IS 5984 : 1999 Glass Shells for Miniature Lamps – Specification
    IS 5985 : 1985 Code of practice for handling and storage of bagged fertilizers
    IS 5986 : 2002 Hot Rolled Steel Flat Prodcuts for Structural Forming and Flanging Purposes – Specification
    IS 5988 : 1970 Spring dowel sleeves (light and heavy patterns) for use in foundries
    IS 5989 : 1998 Hole mills – Specification
    IS 5991 : 1971 Specification for Ballast Rakes
    IS 5992 : 1970 Specification for P-Dichlorobenzene, Technical
    IS 5994 : 1998 Agricultural Tractor – Test code
    IS 5995 : 1971 Specification for Pipe Grip Pliers
    IS 5996 : 1984 Specification for Cotton Belting Ducks
    IS 5997 : 1970 Specification for Holder, Wire and Broach, Dental
    IS 5998 : 1984 Specification for Parallel Sided Clamp Plates
    IS 5999 : 1999 Swing Latches – Specification
    IS 6000 : 1971 Specification for Rail Tongs for Railways
    IS 6001 : 1971 Specification for Flyer Spindles
    IS 6002 : 1992 Tommy Bars for Box Spanners – Specification
    IS 6003 : 1983 Specification for indented wire for prestressed concrete
    IS 6004 : 1980 Criteria for hydraulic design of sediment ejector for irrigation and power canals
    IS 6005 : 1998 Code of practice for phosphating of iron and steel
    IS 6006 : 1983 Specification for uncoated stress relieved strand for prestressed concrete
    IS 6007 : 1971 Specification for Pipe Vices (Hinged Type)
    IS 6008 : 1989 Arc Welding Power Source, Single Operator Rectifier Type, ac and dc – Specification
    IS 6009 : 1970 Method for evaluation of results of accelerated corrosion test
    IS 6011 : 1970 Carbon steel tubes for use on board ships for pressure services
    IS 6012 : 1992 Method for measurement of coating thickness by eddy current
    IS 6013 : 1970 Trowels for use in foundries
    IS 6014 : 1978 Specification for Emulsifiable Larvicidal Oil, Pyrethrum Based
    IS 6015 : 1984 Barium hydroxide
    IS 6016 : 1982 Hose connection for welding and cutting equipment
    IS 6017 : 1971 Thermometer for whirling psychrometers
    IS 6018 : 1993 Platinum, platinum rhodium catalyst gauges
    IS 6019 : 1993 Platinum dish
    IS 6020 : 2003 /ISO 9873 : 1998 Dental Hand Instruments – Reusable Mirrors and Handles
    IS 6021 : 1978 Specification for Web-equipment and 6.6 mm Eyelets, Rim Painted with or without Washers
    IS 6022 : 1994 Fast Green FCF, Food Grade – Specification
    IS 6024 : 1983 Specification for Guards for Harvesting Machines
    IS 6025 : 1982 Specification for Knife Sections for Harvesting Machines
    IS 6026 : 1985 Specification for hand operated sirens
    IS 6027 : 1970 Recommendations for farm cattle housing for large dairy farms
    IS 6028 : 2002 Green Bananas – Guide for Storage and Transport
    IS 6030 : 1997 Sodium Propionate, Food Grade – Specification
    IS 6031 : 1997 Calcium Propionate, Food Grade – Specification
    IS 6034 : 1989 Insulating oil conditioning plants – Specification
    IS 6035 : 1986 Specification for Zinc Phosphate Dental Cement
    IS 6036 : 1987 Specification for Alginate Dental Impression Materials
    IS 6037 : 1970 Specification for Zinc Oxide-eugenol Dental Impression Paste
    IS 6038 : 1979 Specification for Dental Impression (Modelling) Compound
    IS 6039 : 1970 Specification for Zinc Oxide-eugenol Dental Cement
    IS 6040 : 1993 Test chart for precision lathes – Lathes with swing over bed up to 500 mm and distance between centres up to 1500 IS 6041 : 1985 Code of practice for construction of autoclaved cellular concrete block masonry
    IS 6042 : 1969 Code of practice for construction of lightweight concrete block masonry
    IS 6043 : 1970 Specification for Copper Phosphate – Zinc Phosphate Dental Cement
    IS 6044 : Part 1 : 2000 Code of Practice for Liquefied Petroleum Gas Storage Installations – Part 1 : Commercial and Industrial IS 6044 : Part 2 : 2001 Code of Practice for Liquefied Petroleum Gas Storage Installations – Part 2 : Commercial, Industrial and IS 6045 : 1994 Wax-emulsion Sole Leather Polish – Specification
    IS 6046 : 1982 Specification for Gypsum for Agricultural Use
    IS 6047 : 1970 Specification for Scouring Powders
    IS 6049 : 1971 Code of practice for application of temporary corrosion preventives
    IS 6050 : 1971 Specification for temporary corrosion preventives, strippable, hot dipping type
    IS 6051 : 1970 Code for designation of aluminium and its alloys
    IS 6052 : 1988 Glass condensers
    IS 6053 : Part I : 1970 Specification for Hand Tools for Footwear Industry – Part I : Upper Clicking Knife
    IS 6053 : Part II : 1971 Specification for Hand Tools for Footwear Industry – Part II : Bottom Cutting Knife (RAMPI)
    IS 6053 : Part III : 1971 Specification for Hand Tools for Footwear Industry – Part III : Designers’ Knife
    IS 6053 : Part IV : 1972 Specification for Hand Tools for Footwear Industry – Part IV : Half Round Knife
    IS 6053 : Part V : 1972 Specification for Hand Tools for Footwear Industry – Part V : Straight Hacking Knife
    IS 6056 : 1970 Specification for Jointed Wood Poles for Overhead Power and Telecommunication Lines
    IS 6057 : 1988 Hard anodic coatings on aluminium and aluminium alloys
    IS 6058 : 1970 Specification for Rubber Components for Transfusion Fluid Bottles
    IS 6060 : 1971 Code of Practice for Daylighting of Factory Buildings
    IS 6061 : Part I : 1971 Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks – Part 1 : With Hollow Concrete IS 6061 : Part 2 : 1981 Code of practice for construction of floor and roof with joists and filler blocks: Part 2 With hollow clay filler IS 6061 : Part III : 1981 Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks – Part III : With Precast IS 6061 : Part IV : 1981 Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks – Part IV : With Precast IS 6062 : 1971 Method of Measurement of Flow of Water in Open Channels Using Standing Wave Flume-fall
    IS 6063 : 1971 Method of measuarement of flow of water in open channels using standing wave flume
    IS 6064 : 1971 Specification for sounding and suspension equipment
    IS 6065 : Part 1 : 1985 Recommendations for the preparation of geological and geotechnical maps for river valley project: Part IS 6066 : 1994 Recommendations for pressure grouting of rock foundations in river valley projects
    IS 6067 : 1983 Functional Requirements for Water Tender Type `X’ for Fire Brigade Use
    IS 6068 : 1992 Textile machinery – Spinning machinery (preparatory to doubling) – Nomenclature
    IS 6069 : 1971 Specification for Sliding Seat Exerciser
    IS 6070 : 1983 Code of practice for selection, operation and maintenance of trailer fire pumps, portable pumps, water tenders and IS 6071 : 1986 Synthetic separators for lead-acid batteries
    IS 6072 : 1971 Specification for autoclaved reinforced cellular concrete wall slabs
    IS 6073 : 1971 Specification for autoclaved reinforced cellular concrete floor and roof slabs
    IS 6074 : 1971 Code for Functional Requirements of Hotels, Restaurants and Other Food Service Establishments
    IS 6076 : 1990/ISO 1609 : 1986 Vacuum technology – Flange dimensions
    IS 6077 : Part 1 : 1998 Specification for Permanent Magnets – Part 1 : General Requirements and Tests
    IS 6078 : 1986 Specification for Lineman’s Pliers
    IS 6079 : 1989 Low alloy cast steel grinding media
    IS 6080 : 1985 Specification for Double Ended Clamps
    IS 6081 : 1985 Specification for Plain Clamps
    IS 6082 : 1985 Specification for Slotted Clamps
    IS 6083 : 1971 Specification for Table, Obstetric, Labour
    IS 6084 : 1971 Dimensions for 16 mm motion picture film
    IS 6085 : 1979 Dimensions for 35 mm motion picture film
    IS 6086 : 1990 Parallel Action Flat Nose Pliers – Specification
    IS 6087 : 1971 Specification for Metal Cutting Shears
    IS 6088 : 1988 Specification for Oil-to-water Heat Exchangers for Transformers
    IS 6089 : Part I : 1971 Specification for Sensitive Switches – Part I : General Requirements and Tests
    IS 6089 : Part 2 : 1985 Specification for Sensitive Switches – Part 2 : SPDT Unsealed, Type 1
    IS 6090 : 1984 Specification for Cam Operated Clamps
    IS 6092 : Part 1 : 1985 Methods of sampling and test for fertilizers : Part 1 Sampling
    IS 6092 : Part 2 : 1985 Methods of sampling and test for fertilizers : Part 2Determination of nitrogen
    IS 6092 : Part 3 : 1985 Methods of sampling and test for fertilizers : Part 3 Determination of phosphorus
    IS 6092 : Part 4 : 1985 Methods of sampling and test for fertilizers : Part 4 Determination of potassium
    IS 6092 : Part 5 : 1985 Methods of sampling and test for fertilizers : Part 5 Determination of secondary elements and micronutrients
    IS 6092 : Part 6 : 1985 Methods of Sampling and Test for Fertilizers – Part 6 Determination of Moisture and Impurities
    IS 6094 : 1981 Specification for Hexagon Socket Set Screws
    IS 6095 : 1971 Specification for Cans for 35 mm Motion Picture Films
    IS 6096 : 1971 Dimensions for sprockets for 35 mm motion picture projectors
    IS 6097 : 1971 Dimensions for cores for motion picture magnetic film
    IS 6099 : 1991 Rehabilitation equipment – Invalid walkers with crutches – Specification
    IS 6100 : 1984 Sodium tripolyphosphate, anhydrous, technical
    IS 6101 : 1982 Specification for Slotted Pan Head Screws
    IS 6102 : Part I : 1971 Specification for Finger Knobs used in Electronic and Telecommunication Equipment – Part I : General Requirements IS 6103 : 1971 Method of test for specific resistance (resistivity) of electrical insulating liquids
    IS 6104 : 1971 Method of test for interfacial tension of oil against water by the ring method
    IS 6105 : 1971 Specification for Feed Fingers
    IS 6106 : 1971 Specification for Tables, Operation, Hydraulic, Minor
    IS 6107 : 1971 Specification for Dried Silk Worm Pupae as Livestock Feed
    IS 6108 : 1971 Specification for Edible Sesame Flour (Solvent Extracted)
    IS 6109 : 1971 Specification for Edible Sesame Flour (Expeller Pressed)
    IS 6110 : 1983 Specification for Double-texture Rubberised Waterproof Fabrics
    IS 6111 : 1971 Specification for Curette, Uterine (Suction Type)
    IS 6112 : 1971 Specification for Speculum, Vaginal, Double Ended (Sim’s Pattern)
    IS 6113 : 1970 Specification for Aluminium Fasteners for Building Purposes
    IS 6114 : 1991 Gynaecological instruments – Forceps, uterine vulsellum – Shape and dimensions
    IS 6115 : 1991 Gynaecological instruments – Forceps, uterine tenaculum – Shape and dimensions
    IS 6116 : 1992/ISO 6875 : 1988 Dental equipment – Dental patient chair – Specification
    IS 6117 : 1977 Specification for Tapes, Cotton
    IS 6118 : 1991 Multiple Slip-joint Pliers – Specification
    IS 6119 : 1971 Specification for Carbon Arc Lamps for Motion Picture Projection
    IS 6120 : 1971 Method of Test for Total Dye Content in Food Colour Preparations
    IS 6121 : 1985 Specification for Lactarius sp Canned in Oil
    IS 6122 : 1997 Seer Fish (Scomberomorus Sp.) – Frozen – Specification
    IS 6123 : 1971 Specification for Seer Fish (scomberomorus spp.), Fresh
    IS 6124 : 1971 Method for Determination of Crimp in Wool
    IS 6125 : 1971 Enamel, synthetic, stoving, for automobiles
    IS 6126 : 1971 Nitrocellulose surfacer
    IS 6127 : 1971 Specification for Varnish, Spar and Fungicidal
    IS 6128 : 1971 Desiccators
    IS 6129 : 1971 Specification for Square Box Wrenches (Spanners)
    IS 6130 : 1989 Single Square Socket Tee Wrenches (Spanners) – Specification
    IS 6131 : 1980 Technical requirements for hand operated wrenches (spanners) and sockets
    IS 6132 : 2003 /ISO 2415 : 1987 Forged Shackles for General Lifting Purposes – Dee Shackles and Bow Shackles
    IS 6133 : Part I : 1971 Specification for Piezo-electric Filters for Use in Telecommunication and Measuring Equipment – Part I : IS 6134 : Part 1 : 1978 Methods of measurement of electrical characteristics of microwave tubes: Part 1 Common to all microwave IS 6134 : Part 2 : 1973 Methods of measurement of electrical characteristics of microwave tubes: Part 2 Oscillator tubes
    IS 6134 : Part III : 1973 Methods of Measurements on Microwave Tubes – Part III : Amplifier tubes
    IS 6134 : Part IV : 1977 Methods of Measurement of Electrical Characteristics of Microwave Tubes – Part IV : Magnetrons
    IS 6134 : Part 5 : 1980 Methods of measurement of electrical characteristics of microwave tubes: Part 5 Parasitic noise
    IS 6134 : Part VI : 1981 Methods of Measurement of Electrical Characteristics of Microwave Tubes – Part VI : Low-Power Oscillator IS 6134 : Part VII : 1981 Methods of Measurement of Electrical Characteristics of Microwave Tubes – Part VII : High-power Klystrons
    IS 6134 : Part VIII : 1981 Methods of Measurement of Electrical Characteristics of Microwave Tubes – Part VIII : Gas-filled Microwave IS 6134 : Part 9 : 1981 Methods of measurement of electrical characteristics of microwave tubes: Part 9 Backward-wave oscillator IS 6134 : Part 10 : 1981 Methods of measurement of electrical characteristics of microwave tubes:Part 10 Crossed-field amplifier IS 6135 : 1981 Specification for Soda Ash, Fused, Technical
    IS 6136 : 1971 Basic requirements for cathode-ray tubes
    IS 6137 : 1983 Specification for Gauging Members for Plain Plug Gauges, GO and NO GO Members (Size Range from 1 up to IS 6139 : 1990 Sizes of black and white and colour photographic paper in sheets for general use
    IS 6140 : 1971 Specification for Ship’s Snatch Blocks
    IS 6141 : 1971 Specification for Ship’s Single Sheave Blocks Without Becket
    IS 6142 : 1971 Specification for Ship’s Single Sheave Blocks with Becket
    IS 6143 : 1971 Specification for Sheaves Used with Ship’s Blocks
    IS 6144 : 1971 Specification for Axle Pins Used with Ship’s Blocks
    IS 6145 : 1971 Specification for Locking Plate for Axle Pin Used With Ship’s Blocks
    IS 6146 : 1971 Specification for Beckets Used With Ship’s Blocks
    IS 6147 : 1971 Specification for Supporting Straps Used with Ship’s Blocks
    IS 6148 : 1971 Specification for Head Fittings and Round Nuts Used with Ship’s Blocks
    IS 6149 : 1984 Specification for Single-ended Open-jaw Adjustable Wrenches
    IS 6150 : 1971 Specification for ISO Metric Screw Thread Measuring Prisms
    IS 6151 : Part I : 1971 Storage Management Code – Part I : Terminology
    IS 6151 : Part II : 1971 Storage Management Code – Part II : General Care in Handling and Storage of Agricultural Produce and IS 6151 : Part III : 1976 Storage Management Code – Part III : Specific Care in Handling and Storage of Agricultural Produce and IS 6152 : 1985 Methods for determination of colour fastness of textile materials to weathering by xenon arc lamp
    IS 6153 : 1971 Specification for Protective Leather Clothing
    IS 6154 : 1971 Perforated plates for desiccators
    IS 6155 : 1987 Sodium carbonate, monohydrate, photographic grade
    IS 6156 : 1971 Code of safety for chlorosulphonic acid
    IS 6157 : 1981 Valve inspection and test
    IS 6158 : 1984 Recommended Practice for Safeguarding Against Embrittlement of Hot-dip Galvanized Iron and Steel Products
    IS 6159 : 1998 Recommended Practice for Design and Fabrication of Iron and Steel Products Prior to Galvanizing and Metal Spraying
    IS 6162 : Part I : 1971 Specification for Paper-Covered Aluminium Conductors – Part I : Round Conductors
    IS 6162 : Part II : 1971 Specification for Paper Covered Aluminium Conductors – Part II : Rectangular Conductors
    IS 6163 : 1978 Centrifugaly cast (spun) iron low pressure pipes for water, gas and sewage
    IS 6164 : 1971 Code of safety for hydrochloric acid
    IS 6165 : 1992 Dimensions for special shapes of clay bricks
    IS 6166 : 1971 Specification for Thin Taper Keys and Keyways
    IS 6167 : 1971 Specification for Thin Parallel Keys and Keyways
    IS 6169 : 1983 Methods for determination of BHC,(HCH) residue in food comodities
    IS 6170 : 1971 Platinum crucible and lid
    IS 6171 : 1992 Screwing taps – Technical supply conditions
    IS 6173 : Part 1 : 1992 Screwing Taps – Dimensions and Tolerances on Threaded Portion – Part 1 : For ISO Metric Screw Threads
    IS 6173 : Part 2 : 1992 Screwing Taps – Dimensions and tolerances of threaded portion:Part 2 For pipe threads G, Rp and Rc series
    IS 6175 : Part 1 : 1992 Screwing Taps – Part 1 : Hand, and Short Machine Screwing Taps for ISO Metric Screw Threads Sizes IS 6175 : Part 2 : 1992 Screwing Taps – Part 2 : Hand and Short Machine Screwing Taps For ISO Metric Screw Threads Sizes IS 6175 : Part 3 : 1992 Screwing Taps – Part 3 Hand and Short Machine Screwing Taps for ISO Metric Screw Threads Sizes M3 IS 6175 : Part 4 : 1991 Screwing Taps – Part 4 : Long Shank Machine Screwing Taps for ISO Metric Screw Threads Sizes from IS 6175 : Part 5 : 1991 Screwing taps – Part 5 : Nut Screwing Taps for ISO Metric Screw Threads Sizes M3 to M68 with Coarse IS 6175 : Part 6 : 1992 Screwing Taps – Part 6 : Screwing Taps for Pipe Threads Parallel G Series – Specification
    IS 6175 : Part 7 : 1992 Screwing Taps – Part 7 : Screwing Taps for Pipe Threads Parallel Rp Series – Specification
    IS 6175 : Part 8 : 1992 Screwing Taps – Part 8 : Screwing Taps for Pipe Threads Taper Rc Series – Specification
    IS 6176 : 1971 Specification for Steel Ladders for Ship’s Use
    IS 6177 : 1981 Specification for Phosphamidon Water Soluble Concentrates
    IS 6178 : 1982 Specification for Pyrethrum Dusting Powders
    IS 6179 : 1971 Specification and safety requirements for rigid side playpens
    IS 6180 : 1989 Toughened Safety Glasses for Ships’ Round Windows – Specification
    IS 6181 : 1971 Specification for Varnish Bonded Glass-Fibre Braided Rectangular Copper Conductors
    IS 6183 : 1971 Dimensions for dental section arm
    IS 6184 : 1971 Dimensions for Furniture Mirrors
    IS 6185 : 1971 Specification and Safety Requirements for High Chairs
    IS 6186 : 1986 Specification for Bentonite
    IS 6187 : 1971 Specification for Saw, Wire (Gigli pattern)
    IS 6188 : 1988 Specification for wooden bedside table
    IS 6189 : 1985 Specification for metal stationary cupboards
    IS 6190 : 1971 Specification for Anaesthetic Face Masks
    IS 6191 : 1971 Methods of Micro-Biological Colour Fastness and Microscopical Tests for Leather
    IS 6192 : 1994 Textiles- Monoaxially oriented high density polyethylene tapes-Specification
    IS 6193 : 1971 Methods of tests for monoaxially oriented high density polyethylene tapes
    IS 6194 : 1971 Specification for Intermittent Positive Pressure Respirator, Bag Type, Manually Operated
    IS 6195 : 1971 Cast open chocks
    IS 6196 : 1971 Dimensions for fitted half-couplings
    IS 6197 : 1971 Test chart for vertical boring and turning mills with table diameter up to 1600 mm
    IS 6198 : 1992 Specification for ledged, braced and battened timber door shutters
    IS 6199 : 1971 Specification for Wattle Extract
    IS 6200 : Part 1 : 1995 Statistical Tests of Significance – Part 1 : t-, Normal and F-tests
    IS 6200 : Part II : 1977 Statistical Tests of Significance – Part II : X² – Test
    IS 6200 : Part 3 : 1984 Statistical tests of significance:Part 3 Tests for normality
    IS 6200 : Part 4 : 1983 Statistical Tests of Significance – Part 4 : Non-parametric Tests
    IS 6202 : 1971 Specification for Flat Glass Oil Level Gauges for Oil Storage Tanks
    IS 6203 : 1971 Specification for Ship’s Round Eye Plates
    IS 6204 : 1971 Specification for Cast Open Roller Fairleads
    IS 6205 : 1982 Specification for Stationary Cycle Exerciser for Adults
    IS 6206 : 1985 Guide for Selection, Installation and Maintenance of Air Compressor Plants with Operating Pressures up to 10 bars
    IS 6207 : 1971 Specification for Trolleys for Oxygen Cylinders
    IS 6208 : 1971 Specification for Spoons, Plastics, Measuring, Medicine
    IS 6209 : 1982 Methods for Partial Discharge Measurements
    IS 6210 : 1979 Method of test for stress relaxation of gasket materials (to be withdrawn)
    IS 6211 : 1993 Code of practice for packaging of paper and board
    IS 6212 : 1992 Determination of thiosulphate and other residual chemicals in processed photographic films, plates and papers
    IS 6213 : Part I : 1971 Methods of Test for Pulp – Part I : Water Solubility of Pulp
    IS 6213 : Part 2 : 1971 Methods of test for pulp: Part 2 Determination of freeness of pulp
    IS 6213 : Part III : 1971 Methods of Test for Pulp – Part III : Determination of Alpha, Beta and Gamma Cellulose in Pulp
    IS 6213 : Part IV : 1971 Methods of Test for Pulp – Part IV : Determination of Viscosity of Pulp
    IS 6213 : Part 5 : 1971 Methods of test for pulp – Part 5 : Solubility of pulp in one percent caustic soda solution
    IS 6213 : Part 6 : 1971 Methods of test for pulp – Part 6 : Copper number of pulp
    IS 6213 : Part VII : 1971 Methods of Test for Pulp – Part VII : Ash Content in Pulp
    IS 6213 : Part 8 : 1973 Methods of test for pulp – Part 8 : Beating, sheet making, preparation of hand sheets and testing
    IS 6213 : Part IX : 1973 Methods of Test for Pulp – Part IX : Bleach Requirements and Preparation of Hand Sheets for Optical Tests IS 6213 : Part X : 1975 Methods of Test for Pulp – Part X : Determination of Kappa Number
    IS 6213 : Part 11 : 1975 Methods of test for pulp: Part 11 Determination of acid insoluble ash
    IS 6213 : Part XII : 1975 Methods of Test for Pulp – Part XII : Determination of Calcium Content
    IS 6213 : Part 13 : 1975 Methods of test for pulp – Part 13 : Determination of copper
    IS 6213 : Part XIV : 1975 Methods of Test for Pulp – Part XIV : Determination of Iron
    IS 6213 : Part 15 : 1975 Methods of test for pulp – Part 15 : Determination of manganese
    IS 6213 : Part 16 : 1978 Methods of test for pulp – Part 16 : Dirt count
    IS 6213 : Part 17 : 1978 Methods of test for pulp – Part 17 : Determination of saleable mass of pulp
    IS 6213 : Part 18 : 1979 Methods of test for pulp – Part 18 : Determination of chlorine consumption (degree of delignification)
    IS 6213 : Part 19 : 1985 Method of Test for Pulp – Part 19 : Determination of Alkali Volubility of Pulp
    IS 6213 : Part 20 : 1984 Methods of test for pulp – Part 20 : Determination of alkali resistance of pulp
    IS 6213 : Part 21 : 1984 Methods of test for pulp – Part 21 : Determination of dry matter content
    IS 6214 : 1971 Specification for Phosphors for Cathode Ray Tubes
    IS 6215 : 1982 Specification for Short Link Chain, Grade t (8) Non-Calibrated for Lifting Purposes
    IS 6216 : 1982 Specification for Short Link Chain, Grade T (8), Calibrated for Pulley Blocks and other Lifting Appliances
    IS 6217 : 1982 Specification for Short Link Chain, Grade S (6), Non-calibrated for Lifting Purposes
    IS 6218 : 1971 Specification for Bicycle Mudguards
    IS 6219 : 1989 Methods of Test for General Purpose Flat Pallets for Through Transit of Goods
    IS 6220 : 1971 Grading of copra for table use and for oil milling
    IS 6221 : 1971 Specification for Pelvic Band for Steel Orthopedic Calipers and Braces
    IS 6222 : 1971 Specification for Thigh Band for Orthopedic Calipers and Braces
    IS 6223 : 1971 Specification for Calf Band for Orthopedic Calipers and Braces
    IS 6224 : 1980 Specification for Tuber Band for Orthopaedic Calipers and Braces
    IS 6225 : 1971 Specification for Ship’s Oval Eye Plates
    IS 6226 : Part 1 : 1994 Recommendations for apparatus for chemicals analysis of metals,Part 1 Apparatus for determination of IS 6226 : Part 2 : 1987 Recommendations for apparatus for chemicals analysis of metals: Part 2 Determination on of sulphur by IS 6228 : 1971 Specification for Poultry Egg Fertility Tester
    IS 6229 : 1980 Method for Measurement of Real-ear Protection of Hearing Protectors and Physical Attenuation of Earmuffs
    IS 6230 : 1970 Woven asbestos tape for electrical insulating purposes
    IS 6231 : 1971 Specification for Prismatic Angle Gauges
    IS 6232 : 1971 Specification for Cast Iron Box Angle Plates
    IS 6233 : 1971 Specification for Forceps, Bone Cutting (stille liston pattern)
    IS 6234 : 1986 Specification for portable fire extinguishers,water type (stored pressure)
    IS 6235 : 1992 Dimensions of Port-Cores Made of Magnetic Oxides and Associated Parts
    IS 6236 : 1971 Direct recording electrical measuring instruments
    IS 6237 : 1971 Specification for Handloom Cotton Cloth for Plaster of Paris Bandages and Cut Bandages
    IS 6238 : 1971 Specification for Spring Collets
    IS 6239 : 1991/ISO 2076 : 1989 Textiles-Generic names for man-made fibres
    IS 6240 : 1999 Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders IS 6241 : 1971 Method of Test for Determination of Stripping Value of Road Aggregates
    IS 6242 : 1985 Specification for Solvent Extracted Undecorticated Safflower Oilcake as Livestock Feed Ingredient
    IS 6243 : 1985 Method of hydrogen embrittlement test for copper
    IS 6244 : 1980 Specification for Gauging Members for Plain Plug Gauges GO and NO GO Members (Size Range Above 40 to IS 6246 : 1980 Specification for Gauging Members for Plain Plug Gauges GO and NO GO Members (size range above 120 up IS 6248 : 1979 Specification for Metal Rolling Shutters and Rolling Grills
    IS 6249 : 1971 Specification for flush valves and fittings for marine use
    IS 6250 : 1981 Specification for Roofing Slate Tiles
    IS 6251 : 1971 Specification for Shower and Shower Fittings for Marine Use
    IS 6252 : 1971 Specification for Scissors Bandage, Lister’s Pattern
    IS 6254 : 1971 Specification for Side Weft Forks and Grates for Non-automatic Looms
    IS 6255 : 1995 Inverse Dove-Tail and Dove-Tail Milling Cutters – Specification
    IS 6256 : 1995 Shell End Single Angle Milling Cutters – Specification
    IS 6257 : 1982 Specification for Shell End Mills
    IS 6258 : 1971 Specification for o-Nitroanisole
    IS 6259 : 1971 Specification for Anthraquinone, Technical
    IS 6260 : 1971 Specification for p-Nitroanisole
    IS 6261 : 1971 Methods of analysis for detection of insect and rodent contamination in grains and milled products
    IS 6262 : 1971 Method of Test for Power Factor and Dielectric Constant of Electrical Insulating Liquids
    IS 6263 : 1972 Specification for VCI treated paper
    IS 6264 : 1994 J-acid, Technical – Specification
    IS 6265 : 1971 Specification for Quinizarine, Technical
    IS 6266 : 1983 Specification for 1,4-diaminoanthraquinone, Technical
    IS 6267 : 1971 Specification for Silver Cyanide and Silver Potassium Cyanide for Electroplating
    IS 6268 : 1971 Specification for Accessories for Use in Shuttles for Plain Calico Looms
    IS 6269 : 1971 Code of safety for ethylene oxide
    IS 6270 : 1971 Code of safety for phenol
    IS 6271 : 1992 Silver Polish, Liquid – Specification
    IS 6272 : 1987 Specification for Industrial Cooling Fans (Man Coolers)
    IS 6273 : Part I : 1971 Guide for Sensory Evaluation of Foods – Part 1 : Optimum Requirements
    IS 6273 : Part II : 1971 Guide for Sensory Evaluation of Foods – Part II : Methods and Evaluation Cards
    IS 6273 : Part 3 : Sec 1 : 1983 Guide for sensory evaluation of foods: Part 3 Statistical analysis of data: Section 1 Difference/preference IS 6273 : Part 3 : Sec 2 : 1983 Guide for Sensory Evaluation of Foods – Part 3 : Statistical Analysis of Data – Section 2 : Ranking IS 6274 : 1971 Method of Calibrating Liquid-in-glass Thermometers
    IS 6275 : 1971 Specification for Lower Extremity Full Length Brace with Joints with Locks
    IS 6276 : 1971 Specification for Flexible Shafts Used in Concrete Vibrators
    IS 6277 : 1971 Cast mud box
    IS 6278 : 1971 Code of Practice for Whitewashing and Colour-washing
    IS 6279 : 1971 Specification for equipment for grit removal devices
    IS 6280 : 1971 Specification for sewage screens
    IS 6281 : 1971 Specification for Awl, Bone
    IS 6282 : 1986 Specification for Waste Receiver, Dental
    IS 6283 : Part 1 : 1998/ISO 3767-1 : 1991 Tractors and machinery for agriculture and forestry, powered lawn and garden equipment IS 6283 : Part 2 : 1998/ISO 3767-2 : 1991 Tractors and machinery for agriculture and forestry, powered lawn and garden equipment IS 6284 : 1985 Test Code for Power Thresher for Cereals
    IS 6285 : 1971 Dimensions for interchangeability of milling cutters and milling arbors with key drive
    IS 6286 : 1971 Seamless and welded steel pipes for sub-zero temperature service
    IS 6287 : 1985 Methods of Sampling and Analysis for Sugar Confectionery
    IS 6288 : 1971 Test Code for Mouldboard Ploughs
    IS 6289 : 1971 Specification for Staple, Epiphyseal, Orthopedic
    IS 6290 : 1986 Steam irons
    IS 6291 : 1971 Specification for Knife, Clasp
    IS 6292 : 1986 Specification for Cotton Wool Holder, Dental
    IS 6293 : 1996 Assembly tools for screws and nuts – Nomenclature
    IS 6294 : 1971 Specification for Point Hooks with Shank (for Capacities 63 Tonnes to 160 Tonnes)
    IS 6295 : 1986 Code of practice for water supply and drainage in high altitudes and/or sub-zero temperature regions
    IS 6296 : 1983 Specification for Short Link Chain Grade S(6) Calibrated for Pulley Blocks and Other Lifting Appliances
    IS 6297 : Part I : 1971 Specifcation for Transformers and Inductors (Power, Audio, Pulse and Switching) for Electronic Equipment IS 6297 : Part II : 1973 Specification for Transformers and Inductors (Power, Audio, Pulse and Switching) for Electronic Equipment IS 6297 : Part 3 : 1974 Specification for Transformers and Inductors (Power, Audio, Pulse and Switching) for Electronic Equipment IS 6297 : Part 4 : 1974 Specification for Transformers and Inductors (Power, Audio, Pulse and Switching) for Electronic Equipment IS 6298 : 1971 Guide for selection of type and page layout in textbooks
    IS 6299 : 1971 Guide for handling, testing and storage of monochrome photographic prints
    IS 6301 : 1971 Specification for Basic Chromium Sulphate (for Tanning)
    IS 6302 : 1971 Specification for Whirlpool Bath
    IS 6303 : 1984 General requirements and methods of tests for dry cells and batteries
    IS 6304 : 1992 Stationary batteries lead-acid type with pasted positive plates
    IS 6305 : Part 1 : 1980 Safety code for powered industrial trucks, Part 1 Application, operation and maintenance
    IS 6305 : Part II : 1980 Safety Code for Powered Industrial Trucks – Part II : Manufacture
    IS 6306 : 1971 Methods of test for reclaimed rubber
    IS 6307 : 1985 Specification for Rigid PVC Sheets
    IS 6308 : 1982 Specification for Side and Face Milling Cutters
    IS 6309 : 1982 Specification for Cylindrical Milling Cutters
    IS 6310 : 1971 Dimensions for interchangeability of milling cutters and milling arbors with tenon drive
    IS 6311 : 1978 Specification for ISO Metric Screw Thread Measuring Cylinders
    IS 6312 : 1994 Polyethylene containers for the transport of materials – Specification
    IS 6313 : Part 1 : 1981 Code of practice for anti-termite measures in buildings: Part 1 Constructional measures
    IS 6313 : Part 2 : 2001 Code of Practice for Anti-Termite Measures in Buildings – Part 2 : Pre-constructional Chemical Treatment
    IS 6313 : Part 3 : 2001 Code of Practice for Anti-termite Measures in Buildings – Part 3 Treatment for Existing Buildings
    IS 6314 : 1982 Specification for Single Corner Rounding Milling Cutters
    IS 6315 : 1992 Specification for floor springs (hydraulically regulated) for heavy doors
    IS 6316 : 1993 Sowing Equipment – Seed-cum-fertilizer Drill – Test Code
    IS 6318 : 1971 Specification for plastic window stays and fasteners
    IS 6319 : 1971 Specification for Clamp, Bone, Lowman Type
    IS 6320 : 1985 Specification for Power Thresher, Hammer-mill Type
    IS 6321 : 1971 Specification for Needles, Hand Sewing
    IS 6322 : 1982 Specification for Concave Milling Cutters
    IS 6323 : 1982 Specification for Convex Milling Cutters
    IS 6324 : 1971 Specification for Single Angle Milling Cutters
    IS 6325 : 1971 Specification for Double Angle Milling Cutters
    IS 6326 : 1996 Equal Angle Milling Cutters – Specification
    IS 6328 : 1971 Specification for Table, Operation, General Purposes (Non-hydraulic)
    IS 6329 : 2000 Code of Practice for Fire Safety of Industrial Buildings – Saw Mills and Wood Works
    IS 6330 : 1971 Recommendation for liquid flow measurement in open channels by weirs and flumes – end depth method for estimation IS 6331 : 1987 Automotive grey iron castings
    IS 6332 : 1984 Code of practice for construction of floor and roofs using doubly-curved shell units
    IS 6333 : 1985 Specification for Propyl p-hydroxybenzoate for Cosmetic Industry
    IS 6334 : 1987 Specification for p-hydroxybenzoate for Cosmetic Industry
    IS 6335 : 1971 Specification for Knurled Thumb Nuts (Fixtures)
    IS 6336 : 1989 Screws for thrust pads (fixtures) – specification
    IS 6337 : 1989 Thrust pads (fixtures) – specification
    IS 6338 : 1989 Clamping screws (fixtures) – specification
    IS 6339 : 1971 Methods of analysis of concentration, particle size distribution and specific gravity of sediment in streams and canals
    IS 6341 : 1971 Method for laboratory test for efficacy of wood preservatives against soft rot
    IS 6342 : 1987 Specification for rosewood logs for production of sliced veneers
    IS 6343 : 1982 Specification for Door Closers (Pneumatically Regulated) for Light Doors Weighing up to 40 kg
    IS 6344 : 1985 Cadmium metal
    IS 6345 : 1996 Methods of sampling of coal for float and sink analysis
    IS 6346 : 1971 Method of Tests for Timber Props for Mines
    IS 6347 : 1971 Specification for Polyethylene Monofilament Twines for Fishing
    IS 6348 : 1971 Basic terms for hanging of netting
    IS 6349 : 1981 Specification for Tape, Nylon, Tubular for Aerospace Applications
    IS 6350 : 1985 Specification for Shoe Cream
    IS 6351 : 1971 Specification for Unhairing and Scudding Knife for Leather Industry
    IS 6352 : 1991 Slot Drills with Parallel Shank – Specification
    IS 6353 : 1991 End Mills with Parallel Shank – Specification
    IS 6354 : 1991 End Mills with Morse Taper Tapped End Shank – Specification
    IS 6355 : 1982 Specification for Keyway Milling Cutters
    IS 6356 : 2001 Toothpaste – Specification
    IS 6357 : 1971 Specification for Sulphated Oil for Leather Fatliquoring
    IS 6358 : 1971 Potassium and sodium cyanides for electroplating
    IS 6359 : 1971 Method for conditioning of textiles
    IS 6360 : 1971 Specification for Lacto Bonbon
    IS 6361 : 1971 Methods of colorimetric determination of phosphorus
    IS 6362 : 1995 /IEC Pub 34-6 : 1991 Designation of Methods of Cooling of Rotating Electrical Machines
    IS 6363 : 1997 Glossary of terms in work study
    IS 6364 : 1993 Spices and Condiments – Tamarind Pulp – Specification
    IS 6365 : 1971 Laboratory electric ovens
    IS 6366 : 1971 Sprue plugs for use in foundries
    IS 6367 : 1971 Specification for Dextrin for Adhesive Industry
    IS 6368 : 1971 Method for sampling of rubber and rubber combination footwear
    IS 6369 : 1971 Specification for Fleshing Knife for Leather Industry
    IS 6370 : 1981 Mechanical and dimensional requirements of audio tape cassettes for domestic use(first revision)
    IS 6371 : 1971 Specification for Forceps, Bone Holding, Lane’s, Lane-fagge’s and Fergusson’s Patterns
    IS 6373 : 1971 Specification for Sucker, Mucus
    IS 6374 : 1971 Hexagonal box wrenches (spanners)
    IS 6375 : 1991 Wood Splitting Wedges – Specification
    IS 6376 : 1986 Pattern lifting pins and hooks for use in foundries
    IS 6377 : 1971 Mellets for use in foundries
    IS 6378 : 1986 Specification for Pattern Lifting and Rapping Plates
    IS 6379 : 1989 Single Ended Ring Wrenches (Spanners) – Specification
    IS 6380 : 1984 Elastomeric insulation and sheath of electric cables
    IS 6381 : 1972 Construction and testing of electrical apparatus with type of protection ‘e’
    IS 6382 : 1984 Code of Practice for Design and Installation of Fixed Carbon Dioxide Fire Extinguishing System
    IS 6384 : Part 1 : 1978 Code for care, management and housing of laboratory animals: Part 1 Laboratory monkeys
    IS 6384 : Part 2 : 1971 Code for care, management and housing of laboratory animals: Part 2 Laboratory dogs
    IS 6384 : Part 3 : 1971 Code for care, management and housing of laboratory animals: Part 3 Laboratory cats
    IS 6385 : 1997 Saccharin, Food Grade – Specification
    IS 6386 : 1971 Specification for Beta-APO-8′- Carotenal, Food Grade
    IS 6387 : 1987 Specification for Vegetable Protein Infant Food with Milk
    IS 6388 : 1991 Slot Drills with Morse Taper Shanks – Specification
    IS 6389 : 1998 Combination Wrenches with Equal Openings – Specification
    IS 6390 : Part 2 : 1992 Domestic Electrical Clothes shing Machines – Specification – Part 2 : Requirements for Tumbler Dryers
    IS 6391 : 1981 Specification for Magnetic and Ceramic Phonograph Pickups
    IS 6392 : 1971 Steel pipe flanges
    IS 6393 : 1987 Specification for a-Phenylacetamide
    IS 6394 : 1986 Code of Practice for Ultrasonic Testing of Seamless Metallic Tubular Products by Contact and Immersion Methods
    IS 6395 : 1989 Thoracic Surgery Instruments – Clamps, Auricle, Crafoord’s Pattern – Specification
    IS 6396 : 2000 Methods of Measuring Decarburized Depth of Steel
    IS 6398 : 1983 Code of practice for eddy current testing of ferrous seamless pipes and tubes
    IS 6399 : 1971 Code of practice for construction of coffee seed storage structures
    IS 6400 : 1993/ISO 3103 : 1980 Method for preparation of tea infusion for sensory evaluation
    IS 6401 : 1986 Dowel pins for use in foundries
    IS 6402 : 1986 Specification for Forceps, Rubber Dam Clamp and Cotton Roll Clamp, Dental
    IS 6403 : 1981 Code of practice for determination of bearing capacity of shallow foundations
    IS 6404 : 1971 Specification for Tweezers, Dental, No. 1, 2 and 3
    IS 6405 : 1971 Specification for Canthaxanthine, Food Grade
    IS 6406 : 1994 Brilliant Blue FCF, Food Grade – Specification
    IS 6408 : Part 1 : 1990 Recommendations for Modular Co-ordination in Building Industry : Tolerances – Part 1 : Glossary of Terms
    IS 6408 : Part 2 : 1992 Recommendations for modular co-ordination in building industry: Tolerances Part 2 Principles and applications
    IS 6409 : 1971 Code of practice for oxy-acetylene flame cleaning
    IS 6410 : 1991 Specification for magentic flaw detection inks and powders
    IS 6411 : 1985 Specification for gel-coated glass fibre reinforced polyester resin bath tubs
    IS 6412 : 1971 Specification for Benzoyl Chloride, Technical
    IS 6414 : 1972 Specification for Parallel Walking Bars, Adult and Child Sizes, for the Handicapped
    IS 6416 : 1988 Methods for Measuring Case Depth of Steel
    IS 6418 : 1971 Cast iron and malleable cast iron flanges for general engineering purposes
    IS 6419 : 1996 Welding rods and bare electrodes for gas shielded arc welding of structural steel
    IS 6420 : 1989 Eye Surgery Instruments – Retractor, Eye Lachrymal Sac, Muller’s Pattern (Modified) – Specification
    IS 6421 : 1972 Specification for Perforators, Paper, Double Hole
    IS 6422 : 1972 Specification for Perforator, Paper, Single Hole (Docket Punch)
    IS 6425 : 1971 Specification for Dioptometer (Lensometer)
    IS 6426 : 1972 Specification for pile driving hammer
    IS 6427 : 1972 Glossary of Terms Relating to Pile Driving Equipment
    IS 6428 : 1972 Specification for pile frame
    IS 6430 : 1985 Mobile air compressor for construction purposes
    IS 6431 : 1971 Tolerances on Dimensions of Plates Cut by Flame
    IS 6433 : 1972 Specification for guniting equipment
    IS 6434 : 1971 Specification for Bow, Hare Lip Traction (Denis Browne’s pattern)
    IS 6435 : 1971 Specification for Strippers, Tendon
    IS 6436 : 1989 Thoracic Surgery Instruments – Rib Spreader, Finochietto’s Pattern, Adult Size – Specification
    IS 6437 : 1970 Specification for Stripper, Fascia
    IS 6438 : 1980 Specification for Aluminium Phosphide Formulations
    IS 6440 : 1997 Quick action drilling jigs – Specification
    IS 6441 : Part 1 : 1972 Methods of test for autoclaved cellular concrete products: Part I Determination of unit weight or bulk density IS 6441 : Part II : 1972 Methods of Test for Autoclaved Cellular Concrete Products – Part II : Determination of Drying Shrinkage
    IS 6441 : Part IV : 1972 Methods of Test for Autoclaved Cellular Concrete Products – Part IV : Corrosion Protection of Steel Reinforcement IS 6441 : Part V : 1972 Methods of Test for Autoclaved Cellular Concrete Products – Part V : Determination of Compressive Strength
    IS 6441 : Part 6 : 1973 Methods of test for autoclaved cellular concrete products: Part VI Strength, deformation and cracking of IS 6441 : Part 7 : 1973 Methods of test for autoclaved cellular concrete products: Part VII Strength, deformation and cracking of IS 6441 : Part VIII : 1973 Methods of Tests for Autoclave Cellular Concrete Products – Part VIII : Loading Tests for Flexural Members IS 6441 : Part 9 : 1973 Methods of test for autoclaved cellular concrete products: Part IX Jointing of autoclaved cellular concrete IS 6442 : 1989 Thoracic Surgery Instruments – Shears, Rib, Tudor Edward’s Pattern, for Posterior End of Ribs – Specification
    IS 6443 : 1971 Lifters and cleaners for use in foundries
    IS 6444 : 1979 Specification for Sulphur Dusting Powders
    IS 6445 : 1985 Aluminium tee-sections
    IS 6446 : 1986 Specification for Mica Insulated Heating Elements
    IS 6447 : 1986 Vent wires for use in foundries
    IS 6448 : 1993 Diammonium phosphate – Specification
    IS 6449 : 1987 Aluminium bulb angles for marine application
    IS 6450 : 1971 Specification for Rubbers for the Dairy Industry
    IS 6452 : 1989 Specification for high alumina cement for structural use
    IS 6453 : 1984 Technical supply conditions for rolling bearings
    IS 6454 : 1972 Specification for Self-Aligning Roller Bearings
    IS 6455 : 1972 Specification for Single Row Radial Ball Bearings
    IS 6456 : 1972 Specification for Double Row Radial Ball Bearings
    IS 6457 : 1972 Specification for Single Row Cylindrical Roller Bearings
    IS 6458 : 1972 Specification for Double Row Cylindrical Roller Bearings
    IS 6461 : Part 1 : 1972 Glossary of terms relating to cement concrete: Part I Concrete aggregates
    IS 6461 : Part II : 1972 Glossary of Terms Relating to Cement Concrete – Part II : Materials (Other than Cement and Aggregate)
    IS 6461 : Part III : 1972 Glossary of Terms Relating to Cement Concrete – Part III : Concrete Reinforcement
    IS 6461 : Part 4 : 1972 Glossary of terms relating to cement concrete: Part IV Types of concrete
    IS 6461 : Part 5 : 1972 Glossary of terms relating to cement concrete: Part V Formwork for concrete
    IS 6461 : Part 6 : 1972 Glossary of terms relating to cement concrete: Part VI Equipment, tools and plant
    IS 6461 : Part VII : 1973 Glossary of Terms Relating to Cement Concrete – Part VII : Mixing, Laying, Compaction, Curing and Other IS 6461 : Part 8 : 1973 Glossary of terms relating to cement concrete: Part VIII Properties of concrete
    IS 6461 : Part 9 : 1973 Glossary of terms relating of cement concrete: Part 9 Structural aspects
    IS 6461 : Part X : 1973 Glossary of Terms Relating to Cement Concrete – Part X : Tests and Testing Apparatus
    IS 6461 : Part 11 : 1973 Glossary of terms relating to cement concrete: Part 11 Prestressed concrete
    IS 6461 : Part 12 : 1973 Glossary of terms relating to cement concrete: Part 12 Miscellaneous
    IS/ISO 6462 : 1983 Face Milling Cutters with Indexable Inserts – Dimensions
    IS 6462 : 1972 Fitting Dimensions for Dental Burs and Cutters
    IS 6463 : 1972 Specification for Burs, Antrum (Tilley’s Pattern)
    IS 6464 : 2000 ENT Diagnostic Instruments – Tuning Forks (Gardiner Brown’s Pattern) – Specification
    IS 6465 : 1972 Specification for Trocar, Antral, with Cannula (Tilley Lichtwitz’ Pattern)
    IS 6466 : 1989 Thoracic and Cardiovascular Surgery Instruments – Needle Holders – Specification
    IS 6467 : 1989 Thoracic Surgery Instruments – Periosteotome, Rib, Alexander’s Pattern – Specification
    IS 6468 : 1989 Thoracic Surgery Instruments – Trocar, Empyema, Nelson’s Pattern – Specification
    IS 6469 : 1972 Specification for Harpoon Trocar (Tilley’s Pattern)
    IS 6470 : 1972 Specification for Politzerization Apparatus (Pritchard’s pattern)
    IS 6471 : 1971 Specification for Spectrometer (Student Type)
    IS 6472 : 1971 General Requirements for Tinted Ophthalmic Glass
    IS 6473 : 1972 Specification for Trial Spectacle Lens Sets
    IS 6475 : 1987 Aluminium tee bars for marine application
    IS 6476 : 1987 Aluminium bulb plates for marine application
    IS 6477 : 1983 Dimensions for wrought aluminium and aluminium alloys, extruded hollow section
    IS 6479 : 1972 Specification for Balls, Punching
    IS 6480 : 1988 Glossary of terms relating to domestic and commercial gas-burning appliances
    IS 6481 : 1971 Guide for Principal Uses and Styles of Fibreboard Containers
    IS 6482 : 1971 Tempers and rammers for use in foundries
    IS 6483 : 1981 Specification for Linch Pin Assembly
    IS 6484 : 1972 Specification for Forceps, Gouge, Orthopaedic Fergusson’s Pattern
    IS 6485 : 1972 Specification for Forceps, Gouge, Angular, Orthopaedic
    IS 6486 : 1972 Specification for Forceps, Gouge, Orthopaedic Lane’s Pattern
    IS 6487 : 1983 Specification for Cotton Tapes, Unproofed and Proofed, for Ammunition Purposes
    IS 6488 : 1999 Textiles – Cotton Webbing for Personal Web Equipment – Specification
    IS 6489 : 1993/ISO 9290 : 1990 Textiles – Woven fabrics – Determination of tear resistance by falling pendulum method
    IS 6490 : 1971 Method for Determination of Stiffness of Fabrics – Cantilever Test
    IS 6491 : 1972 Methods of Sampling Fly Ash
    IS 6492 : 1972 Methods for sampling of powders for powder metallurgical purposes
    IS 6494 : 1988 Code of practice for water-proofing of underground water reservoirs and swimming pools
    IS 6495 : 1984 Method of Tumbler Test for Iron Oxides: Lump Ores, Sinter and Pellets
    IS 6497 : 1990 Method of test for the efficacy of preservatives and evaluating the natural durability of timbers used in cooling towers
    IS 6498 : 1971 Glossary of terms used in connection with pulley blocks
    IS 6499 : 1971 Specification for Curette, Uterine, Double-ended, Sharp, Sim’s Pattern
    IS 6500 : 1972 Thermometers for measurement of sea surface temperatures
    IS 6501 : 1972 Specification for Forceps, Gouge, Orthopaedic, Stille Luer’s Pattern
    IS 6502 : 1971 Size stick for footwear industry
    IS 6503 : 1988 Method for quantitative chemical analysis of ternary mixtures of protein fibres, nylon 6 or nylon 6.6 and certain other IS 6504 : 1979 Method for quantitative chemical analysis of ternary mixtures of viscose rayon, cotton and protein fibres
    IS 6505 : 1971 Specification for Curette, Uterine, Double-ended, Sharp and Blunt, Sim’s Pattern
    IS 6506 : 1972 Methods for thermal shock tests on glassware
    IS 6507 : 1991 Sodium chromate, technical
    IS 6508 : 1988 Glossary of terms relating to building lime
    IS 6509 : 1985 Code of practice for installation of joints in concrete pavements
    IS 6510 : 1971 Specification for Curette, Endometrial Biopsy, Suction Type
    IS 6511 : 1997/ISO 2374 : 1983 Lifting Appliances – Range of Maximum Capacities for Basic Models
    IS 6512 : 1984 Criteria for design of solid gravity dams
    IS 6513 : 1985 Specification for Fine Adjustment Valves for Use with Oxygen Cylinders for Oxygen Therapy
    IS 6514 : 1972 Specification for Nasal Cartilage Knife (Ballenger’s Pattern)
    IS 6515 : 1999 Sodium Pentachlorophenate – Specification
    IS 6516 : 1972 Methods for chemical analysis of tin and lead in secondary tin
    IS 6518 : 1992 Code of practice for control of sediment in reservoirs
    IS 6519 : 1971 Code of practice for selection, care and repair of safety footwear
    IS 6521 : Part 1 : 1972 Code of practice for design of tower cranes:Part 1 Static and rail mounted
    IS 6522 : 1972 Criteria for design of silt vanes for sediment control in offtaking canals
    IS 6523 : 1983 Specification for Precast Reinforced Concrete Door and Window Frames
    IS 6524 : 1972 Code of practice for installation and observation of instruments for temperature measurement inside dams; resistance IS 6525 : 1972 Specification for Syringe, Hypodermic, Dental for Interchangeable Needles
    IS 6526 : 1971 Method for evaluation of strength and shade of fast bases by dyeing test
    IS 6527 : 1995 Stainless steel wire rod
    IS 6528 : 1995 Stainless steel wire
    IS 6529 : 1996 Stainless steel blooms, billets and slabs for forging
    IS 6530 : 1972 Code of practice for laying of asbestos cement pressure pipes
    IS 6531 : 1994 Canal Head Regulators – Criteria for Design
    IS 6532 : 1972 Code of practice for design, installation, observation and maintenance of uplift pressure pipes for hydraulic structures IS 6533 : Part 1 : 1989 Code of practice for design and construction of steel chimneys Part 1 Mechanical aspects )
    IS 6533 : Part 2 : 1989 Code of practice for design and construction of steel chimneys Part 2 Structural aspects
    IS 6534 : 1971 Guiding principles of grading and inspection of timber
    IS 6535 : 1979 Data for procurement of straight bevel gears
    IS 6536 : 1972 Pumps for handling volatile liquids
    IS 6537 : 1972 Guide to the use of temperature control devices for crystal units
    IS 6538 : 1971 Three-pin plugs made of resilient material
    IS 6539 : 1972 Specification for Intrinsically Safe Magneto Telephones for Use in Hazardous Atmospheres
    IS 6540 : 1972 Code for hygienic conditions for manufacture and handling of ice for human consumption
    IS 6541 : 1972 Code for hygienic conditions for establishment and maintainance of mid-day school meal programmes
    IS 6542 : 1972 Code for hygienic conditions for fruit and vegetable canning units
    IS 6543 : 1972 Specification for Glass Artificial Insemination Pipettes for Cattle
    IS 6544 : 1972 Specification for Wing Band for Poultry
    IS 6545 : 1972 Specification for Leg Band for Poultry
    IS 6546 : 1989 Claw Hammers – Specification
    IS/ISO 6547 : 1981 Hydraulic Fluid Power – Cylinders – Piston Seal Housings Incorporating Bearing Rings – Dimensions and Tolerances
    IS 6547 : 1972 Specification for Electric Chain Hoists
    IS 6548 : 1992/ISO 1224 : 1984 Rolling bearings – Instrument precision bearings
    IS 6549 : 1972 Glossary of terms used in connection with lifting tackle
    IS 6550 : 1992 Thread Milling Cutter with Parallel Shank – Specification
    IS 6551 : 1992 Thread Milling Cutters with Morse Taper Shanks – Specification
    IS 6552 : 1987 Specification for straight mineral high demulsibility oils
    IS 6553 : 1971 Environmental requirements for semiconductor devices and integrated circuits
    IS 6554 : 1983 Specification for Soldering Ferrules of Straight-Through Joints
    IS 6555 : 1972 Specification for Dental Laboratory Plaster
    IS 6556 : 1972 Specification for Dental Impression Plaster
    IS 6557 : 1972 Specification for Albumen Flakes, Non-Edible Quality
    IS 6558 : 1972 Code of practice for cold storage of shell eggs
    IS 6559 : 1972 Code of practice for ante-mortem and post-mortem inspection for poultry
    IS 6560 : 1996 Molybdenum and chromium-molybdenum low alloy steel welding rods and bare electrodes for gas shielded arc IS 6561 to IS 6564 : 1972 Specification for Test Films for 35 mm Motion-picture Sound Reproducers, Photographic Type
    IS 6565 : 1972 Specification for Stethoscope (foetoscope ) for – Foetal Heart Sounds, Pinard’s Pattern
    IS 6566 : 2001/ISO 668 : 1995 Series 1 Freight Containers – Classification, Dimensions and Ratings
    IS 6567 : 1972 Radiation protection for an X-ray tube in a protective tube-housing,operating between 10kV and 400 kV
    IS 6569 : 1992/ISO 830 : 1991 Freight containers – Terminology
    IS 6570 : 1972 Method for Quantitative Chemical Analysis of Binary Mixtures of Jute and Animal Fibres
    IS 6571 : 1991 Rehabilitation equipment – Wheelchairs, non-folding, adult size, institutional model – Specification
    IS 6572 : 1987 Dimensions for pneumatic light rivet snap shanks and its chuck bushings
    IS 6573 : 1987 Dimensions for pneumatic coal pick shanks and chuck bushings
    IS 6574 : 1987 Dimensions for pneumatic rivet snap shanks parallel and chuck bushings
    IS 6575 : 1987 Dimensions for pneumatic breaker and spade shanks and its chuck bushings
    IS 6578 : 1992 Obstetric Instruments – Forceps,, ovum – Shape and dimensions
    IS 6579 : 1981 Specification for Coarse Aggregate for Water Bound Macadam
    IS 6580 : 1972 Specification for Train Lighting Belt Fasteners
    IS 6581 : 1972 Specification for Endotracheal Tubes (Rubber)
    IS 6582 : 1971 Bio-assay methods for evaluating acute toxicity of industrial effluents and wastewaters
    IS 6582 : Part 2 : 2001 Bio-assay Method for Evaluating Acute Toxicity of Industrial Effluents and Waste Waters – Part 2 : Using IS 6583 : 1989 Power transmission belts – Train lighting belting – Specification
    IS 6584 : 1972 Specification for Dilators, Uterine, Single Ended, Hegar’s Pattern
    IS 6586 : 1989 Recommended practice for metal spraying for protection of iron steel
    IS 6587 : 1987 Specification for Spun Hemp Yarn
    IS 6588 : 1972 Gold chloride (chloroauric acid)
    IS 6589 : 1992 Gynaecological Instruments – Forceps, uterine, dressing, Bozemann’s pattern – Shape and dimensions
    IS 6590 : 1972 Specification for Braided Nylon Rope for Mountaineering Purposes
    IS 6591 : 1972 Specification for Rail Milk Tankers
    IS 6592 : 1972 Soil thermometers
    IS 6593 : 1972 Specification for Electric Serological Water-baths
    IS 6594 : 2001 Technical Supply Conditions for Steel Wire Ropes and Strands
    IS 6595 : Part 1 : 2002 Horizontal Centrifugal Pumps for Clear, Cold Water – Specification – Part 1 : Agricultural and Rural Water IS 6595 : Part 2 : 1993 Horizontal centrifugal pumps for clear, cold water: Part 2 General purposes other than agricultural and rural IS 6596 : 1972 Specification for Pumps for Handling Paper Stock
    IS 6597 : 2001 Glossary of Terms Relating to Fragrance and Flavour Industry
    IS 6598 : 1972 Cellular concrete for thermal insulation
    IS 6599 : 1972 Specification for Vaulting Boxes
    IS 6600 : 1972 Guide for loading of oil immersed transformers
    IS 6601 : 1987 Permissible deviations in chemical composition for products analysis of steel
    IS 6603 : 2001 Stainless Steel Bars and Flats – Specification
    IS 6604 : 1991 Code for packaging of solid pesticides (up to 1000 g)
    IS 6605 : 1972 Specification for Potassium Chromate
    IS 6606 : 1972 Specification for Albuminometer (Esbach’s) with Stopper, Stand and Case
    IS 6607 : 1972 Specification for rebated mortice locks (vertical type)
    IS 6608 : 1978 Specification for Skin Creams
    IS 6609 : Part 1 : 1972 Methods of Test for Commercial Blasting Explosives and Accessories – Part I : Gun Powder
    IS 6609 : Part II : Sec I : 1973 Methods of Test for Commercial Blasting Explosives and Accessories – Part II : Explosives – Section IS 6609 : Part II : Sec 2 : 1974 Methods of Test for Commercial Blasting Explosives and Accessories – Part II : Explosives – Section IS 6609 : Part 2 : Sec 3 : 1980 Methods of test for commercial blasting explosives and accessories: Part II Explosives Section 3 IS 6609 : Part 3 : 1973 Methods of test for commercial blasting explosives and accessories: Part III Detonators, general and permitted
    IS 6609 : Part 4 : 1984 Methods of test for commercial blasting explosives and accessories: Part IV Detonating fuses
    IS 6609 : Part 5 : 1972 Methods of test for commercial blasting explosives and accessories: Part V Safety fuses
    IS 6610 : 1972 Specification for Heavy Washers for Steel Structures
    IS 6611 : 1988 Symbols for rubbers and latices
    IS 6612 : 1979 Specification for Unteased White Cotton Waste
    IS 6613 : 2002 Neutral Spirit for Alcoholic Drinks – Specification
    IS 6614 : 1972 Aluminium chloride, anhydrous, technical
    IS 6615 : 1972 Specification for General Purpose Packing/Wrapping Paper
    IS 6616 : 1982 Ballasts for high pressure mercury vapour lamps
    IS 6619 : 1972 Safety Code for Semiconductor Rectifier Equipment
    IS 6621 : 1985 Specification for Cricket Stumps and Bails
    IS 6622 : 1972 Specification for Greaseproof Paper
    IS 6623 : 1985 Specification for High Strength Structural Nuts
    IS 6624 : 1972 Specification for Basic Hand Splint, Palmar Arch Support
    IS 6625 : 1972 Specification for Basic Hand Splint Component
    IS 6626 : 1972 Specification for Basic Hand Splint, Forearm Piece
    IS 6628 : 1972 Specification for Slide Rails for Use in Abattoirs
    IS 6629 : 1972 Cast iron rolls
    IS 6630 : 1985 Seamless ferritic alloy steel pipes for high temperature steam service
    IS 6631 : 1972 Specification for Steel Pipes for Hydraulic Purposes
    IS 6632 : 1988 Specification for wooden folding chairs
    IS 6634 : 1972 Specification for Multi-purpose Closed Chocks
    IS 6635 : 1972 Specification for Tractor Operated Disc Harrows
    IS 6636 : 1972 Specification for Hood for Air Pipes of Ships’ Piping Systems
    IS 6637 : 1972 Methods for determination of moisture in wool
    IS 6638 : 1972 Specification for Tractor-Mounted Spring-Loaded Cultivators
    IS 6639 : 1972 Specification for Hexagon Bolts for Steel Structures
    IS 6640 : 1972 Specification for Toughened Safety Glasses for Ships’ Windows
    IS 6641 : 1985 Specification for wooden disc for tents
    IS 6642 : 1986 Specification for mason’s mallets
    IS 6643 : 1987 Specification for wooden pins for bivouac tents
    IS 6644 : 1986 Specification for tinman’s mallets
    IS 6645 : 1972 Specification for Service Nameplates for Marine Valves and Fittings
    IS 6647 : 1972 Drill pipes for use in oil or natural gas wells
    IS 6648 : 1972 Carbon electrodes for dry cells and batteries
    IS 6649 : 1985 Specification for Hardened and Tempered Washers for High Strength Structural Bolts and Nuts
    IS 6650 : 1972 Method for determination of residual thiosulphate and tetrathionate in processed photographic papers
    IS 6651 : 1972 Anodized aluminium for automobile use
    IS 6652 : Part I : 1986 Glossary of terms relating to metal forming machines and tools:Part 1 Metal forming tools
    IS 6652 : Part 2 : 1986 Glossary of terms relating to metal forming machines and tools:Part 2 Metal forming machines relating to IS 6652 : Part 3 : 1986 Glossary of terms relating to metal forming machines and tools:Part 3 Metal forming technology and operations IS 6653 : 1972 Methods for determination of staple length of greasy wool
    IS 6654 : 1992 Glass containers – glossary of terms
    IS 6655 : 1972 Methods of test for sulphur
    IS 6656 : 1986 Specification for caulking mallets
    IS 6657 : 1972 Specification for Sal Bark
    IS 6658 : 1972 Specification for Cashew Testa
    IS 6660 : 1972 Guide for illustrations in books
    IS 6661 : 1972 Specification for Potassium Schoenite
    IS 6662 : 1993 Timber Species Suitable for Wooden Packaging – Specification
    IS 6663 : 1972 Method for Determination of Angle of Repose of Grains
    IS 6664 : 1992 Rubber Microcellular Sheets for Soles and Heels – Specification
    IS 6665 : 1972 Code of pratice for industrial lighting
    IS 6666 : 1972 Recommendations for frequency notation for periodical publications
    IS 6667 : 1972 Glossary of terms used in synthetic resin industry
    IS 6668 : 1972 Methods for preparing test specimens from fabric samples for physical tests
    IS 6669 : 2001 Apples – Guide for Cold Storage
    IS 6670 : 1972 Guide for storage of potatoes
    IS 6671 : 1987 Specification for germination paper
    IS 6672 : 1989 Cotton Tapes for Berets, Mercerized – Specification
    IS 6673 : 1972 Specification for Waxed Cotton Selvedge Tape
    IS 6674 : 1972 Specification for Cotton Webbing for Use in Packing Aero-engines
    IS 6675 : 1972 Specification for Cable Lifters for Windlasses
    IS 6676 : 1986 Specification for bossing (plumbers), mallets
    IS 6678 : 1972 Specification for Ammonium Thiosulphate Solution, Photographic Grade
    IS 6679 : 1972 Test chart for general purpose gear shaping machines (Table diameter up to 1000 mm)
    IS 6680 : 1992 Railway carriage fans
    IS 6681 : 1972 Dimensions for self-release 7/24 tapers for spindle noses for milling machines
    IS 6682 : 1991 Morse Taper Extension Sockets – Specification
    IS 6683 : 1998 Diameters of wires for platinum group metals and their alloys
    IS 6684 : 1972 Specification for Milk Can Trolleys
    IS 6685 : 1972 Specification for Life Jackets
    IS 6686 : 1985 Specification for Nose Bars for Speed and Ring Spinning Frames
    IS 6687 : 2002 Code of Practice for Selection, Storage, Installation and Maintenance of Conveyor Belting
    IS 6688 : 1981 Specification for Taper Pins
    IS 6689 : 2003/ISO 8734 : 1997 Parallel Pines of Hardened Steel and Martensitic Stainless Steel (Dowel Pins)
    IS 6690 : 1981 Specification for Blades for Rotavator for Power Tillers
    IS 6691 : 1972 Specification for Cast Closed Roller Fairleads
    IS 6692 : 1972 Method of milk recording of cattle
    IS 6693 : 1972 Specification for Ebonite
    IS 6694 : 1999 Magnesium Ingots – Specification
    IS 6695 : 1998 Honey bees – Code for conservation and maintenance
    IS 6696 : 1972 Specification for Egg Washing Machines
    IS 6697 : 1988 Hot-dip aluminium coatings on ferrous parts (other than sheet,strip and wire) for general purposes
    IS 6698 : 1972 Specification for Oil of Clove
    IS 6699 : 1989 Perfumery Materials – Oil of Cinnamon Leaf – Specification
    IS 6700 : 1972 Requirements for general purpose cathode-ray oscilloscope
    IS 6701 : 1985 Tungsten filament miscellaneous electric lamps
    IS 6702 : 1991 Morse Taper Reduction Sleeves – Specification
    IS 6703 : 1972 Glossary of wooden packaging terms
    IS 6704 : 1992 Pigmented Floor Polish, Paste – Specification
    IS 6707 : 1972 Specification for willow logs for artificial limbs
    IS 6708 : 1977 Specification for Centre Drills Type A
    IS 6709 : 1985 Specification for centre drills type B
    IS 6710 : 1977 Specification for Centre Drills Type R
    IS 6711 : 1972 Code of practice for maintenance of wood poles for overhead power and telecommunication lines
    IS 6712 : 2003 o-Dichlorobenzene – Specification
    IS 6713 : 1996 Code of Practice for Packaging and Storage of Vulcanized Rubber
    IS 6714 : 1989 Ready mixed paint, finishing, non-slip deck
    IS 6715 : 1972 Specification for Master Cartons for Export of Frozen Sea Foods and Frog Legs
    IS 6716 : 1981 Specification for Benzoic Acid, Technical
    IS 6718 : 1972 Specification for Phenoxyacetic Acid
    IS 6719 : 1972 Specification for Solid PVC Soles and Heels
    IS 6720 : 1972 Referance tables for plantinum/30 percent rhodium-platinum/6 percent rhodium thermocouples
    IS 6721 : 1972 Specification for PVC Sandal
    IS 6722 : 1972 Dimensions for aircraft jacking pad
    IS 6723 : 1972 Recommendations for aircraft instrument dials and pointers
    IS 6724 : 1972 Specification for Aircraft Sealing Wire
    IS 6725 : 1999 Aircraft – Lockwire – Specification
    IS 6726 : 1972 Specification for Interlinings for Shirts
    IS 6727 : 1972 Fireclay checker bricks for open hearth furnace
    IS 6728 : 1972 Recuperator tubes, tiles and collars for soaking pits in steel plants
    IS 6729 : 1972 Specification for wooden paddles
    IS 6730 : 1972 Specification for Felt Nails
    IS 6731 : 1977 Specification for Locknuts, Narrow Series and Lockwashers with Straight Inner Tab for Rolling Bearings
    IS 6732 : 1972 Specification for Double Point Nails
    IS 6733 : 1972 Specification for Wall and Roofing Nails
    IS 6734 : 1972 Specification for Cut Lath and Lath Nails
    IS 6735 : 1994 Fasteners – Spring lock washers for screws with cylindrical heads – Specification
    IS 6736 : 1972 Specification for Slotted Raised Countersunk Head Wood Screws
    IS 6737 : 1972 Conventional signs for use on general arrangement and detail plans of ships
    IS 6738 : 1972 Panel pins and lost head nails
    IS 6739 : 1972 Slotted round head wood screws
    IS 6740 : 1985 Gudgeon pins for internal combustion engines
    IS 6741 : 1972 Numerals for Aircraft Instrument Dials and Number Plates
    IS 6742 : 1972 Shape, size and direction of operation of lever controls on aircraft
    IS 6743 : 1972 Sizes and mounting dimensions of aircraft instruments cases (rear mounting type)
    IS 6744 : Part I : 1972 Methods of Chemical Analysis of Ilmenite, Part I
    IS 6745 : 1972 Method for determination of mass of zinc coating on zinc coated iron and steel articles
    IS 6746 : 1994 Unsaturated Polyester Resin Systems – Specification
    IS 6747 : 1981 Specification for Chewing Gum and Bubble Gum
    IS 6748 : Part 1 : 1973 Recommendations for watershed management relating to soil conservation: Part 1 Agronomic aspects
    IS 6749 : 1972 Glossary of terms relating to alcohol (ethyl industry and trade)
    IS 6750 : 1985 Cylinder liners for internal combustion engines
    IS 6751 : 1972 Specification for Aluminium Alloy Castings and Strips for Bearings
    IS 6752 : 1991 Code of practice for magnetic particle flaw detection of ferrous pipes and tubes
    IS 6753 : 1972 Code for Identification of Aircraft Pipelines
    IS 6754 : 1972 Specification for Aluminium Alloy Ingots for Bearings
    IS 6755 : 1980 Double coil helical spring washers
    IS 6756 : 2001 Electrical and Electronic Measuring Equipment – Documentation
    IS 6757 : 1972 Dimensions for high tension cable terminations for X-ray tubes
    IS 6758 : 1972 Dimensions for high tension receptacles for X-ray tubes
    IS 6759 : 1996 Radio receivers for frequency modulation broadcast transmission – Specification
    IS 6760 : 1972 Specification for Slotted Countersunk Head Wood Screws
    IS 6761 : 1994 Fasteners – Countersunk Head Screws with Hexagon Socket – Specification
    IS 6762 : 1986 Specification for Drinking Chocolate (Sweetened Cocoa Powder)
    IS 6763 : Part 1 : 1987 Specification and Testing for Fifth Wheel King Pin for Semi-trailers – Part 1 : Size 50
    IS 6763 : Part 2 : 1987 Specification and Testing for Fifth Wheel King Pin for Semi-trailers – Part 2 : Size 90
    IS 6765 : 1972 Rated capacity of counter balanced forklift trucks
    IS 6766 : 1993 Buffing Compounds Used for Nickel and Chrome Plated Surfaces – Specification
    IS 6767 : Part I : 1972 Specification for Direct Reading Pointer Indicator Type Ac/Dc Electronic Voltmeter – Part 1 : Methods of IS 6767 : Part 2 : 1972 Specification for Direct Reading Pointer Indicator Type ac/dc Electronic Voltmeter – Part 2 : Up to 30 Mhz
    IS 6767 : Part 3 : 1972 Specification for Direct Reading Pointer Indicator Type ac/dc Electronic Voltmeter – Part 3 : Up to 300 MHz
    IS 6768 : 1973 Specification for m-aminophenol
    IS 6769 : Part I : 1972 Specification for Direct Reading Pointer Indicator Type AC Electronic Millivoltmeter – Part I : Methods of IS 6769 : Part 2 : 1972 Specification for Direct Reading Pointer Indicator Type AC Electronic Millivoltmeter – Part 2 : With a Frequency IS 6770 : 1984 Specification for Benzophenone
    IS 6771 : 1972 Specification for Aluminium Polish, Paste for Aircraft
    IS 6773 : 1978 Sodium silicate for use in foundries
    IS 6774 : 1972 Classification of essential oil-bearing aromatic plants
    IS 6775 : 1973 Specification for Ethyl Chloride, Technical
    IS 6776 : 1980 Specification for Knurling Wheels
    IS 6777 : 1989 Thoracic and Cardiovascular Surgery Instruments – Forceps, Dissecting, Lung – Specification
    IS 6778 : 1989 Thoracic Surgery Instruments – Forceps, Lung, Duval’s Pattern – Specification
    IS 6779 : 1989 Thoracic Surgery Instruments – Forceps, Dissecting and Ligature, Mixter’s Pattern – Specification
    IS 6780 : 1989 Thoracic Surgery Instruments – Forceps, Artery, Robert’s Pattern, Curved on Flat – Specification
    IS 6781 : 1972 Specification for Staple Ankle Joint
    IS 6782 : 1972 Specification for Hog Gambrels
    IS 6783 : 1986 Specification for Basketball Frames
    IS 6784 : 1996 Method for performance testing of water meters (domestic type)
    IS 6785 : 1982 Specification for Plate, Bone, Wainwright, Osteotomy
    IS 6786 : 1987 Specification for Card Gauges
    IS 6787 : 1973 Specification for Plate, Bone, McLaughlin
    IS 6788 : 1973 Chromite sand for use in foundries
    IS 6789 : 1972 Bolted flameproof cable coupler and adaptors
    IS 6790 : 1973 Specification for Plate, Bone, Intertrochanteric, Thornton Type
    IS 6791 : 1973 Method of Testing Natural Durability of Timber and Efficacy of the Wood Preservatives Against Marine Borers
    IS 6792 : 1992 Method for Determination of Electric Strength of Insulating Oils
    IS 6793 : 1996 Fumaric Acid, Food Grade – Specification
    IS 6794 : 1997 Dodecyl Gallate, Food Grade – Specification
    IS 6795 : 1972 Specification for Acacia (Arabic) Gum, Food Grade
    IS 6796 : 1997 Propyl Gallate, Food Grade – Specification
    IS 6797 : 1972 Specification for Methyl Ester of Beta-Apo-8′-Carotenoic Acid
    IS 6798 : 1997 Octyl Gallate, Food Grade – Specification
    IS 6799 : 1987 Specification for Padlocks, Bicycle
    IS 6800 : 1972 Aircraft Tow Bar Connections to Tractors
    IS 6801 : Part 1 : 1999/ISO 8319-1 : 1996 Orthopaedic Instruments – Drive Connections – Part 1 : Keys for Use with Screws with IS 6801 : Part 2 : 1987/ISO 8319-2 : 1986 Specification for Drive Connections for Orthopaedic Instruments – Part 2 : Screw Drivers IS 6802 : 1986 Specification for Prosthetic Hip Joint
    IS 6803 : 1972 Specification for Special Proofed Canvas and Duck
    IS 6804 : 1972 Glass-electrodes for direct reading pH meters
    IS 6805 : 1973 Specification for Assmann Psychrometer
    IS 6806 : 1973 Specification for Snowgauge
    IS 6807 : 1972 Specification for Reinforced (Flexo-metallic) Magill’s Endotracheal Tube
    IS 6808 : 1972 Specification for Grinder, Hand, Domestic
    IS 6809 : 1990 Rehabilitation equipment – Fixed-height walking frame – Specification
    IS 6810 : 1990 Rehabilitation equipment – Metal tripod and tetrapod sticks – Specification
    IS 6811 : 1972 Specification for Syringe, Water, Self-filling, Dental
    IS 6812 : 1986 Specification for Knee Joint, Uniaxial for Below Knee Prosthesis
    IS 6813 : 2000 Sowing Equipment – Seed-cum-fertilizer Drill – Specification
    IS 6814 : 1972 Specification for Syringe, Air and Water, Dental
    IS 6815 : 1972 Specification for Retainers, Matrix, Dental, No. 1 and 2
    IS 6818 : 1973 Code of safety for phosphoric acid
    IS 6819 : 1973 Code of safety for calcium carbide
    IS 6820 : 1987 Recommendations for modular co-ordination in building industry: Applications
    IS 6821 : 1973 Methods for sampling non-threaded fasteners
    IS 6822 : 1972 Specification for Cutter, Distal Arch Wire, Dental
    IS 6823 : 1972 Specification for Forceps, Extraction, Dental, Lower Molars
    IS 6824 : 1972 Specification for Forceps, Extraction, Dental, Lower Wisdom Tooth
    IS 6825 : 1972 Specification for Forceps, Extraction, Dental, Upper Cuspids and Bicuspids
    IS 6826 : 1972 Forceps, extraction, dental, lower incisors, cuspids and bicuspids, left
    IS 6827 : 1972 Specification for Forceps, Extraction, Dental, Upper Molars, Left
    IS 6828 : 1972 Specification for Forceps, Extraction, Dental, Upper Molars, Right
    IS 6829 : 1991 Dental Instruments – Orthodontic Pliers, Angle Wire Bending – Shape, Dimensions and Tests
    IS 6830 : 1994 Offset ink, black, general black – specification
    IS 6831 : 1992 Caustic potash
    IS 6832 : 1985 Specification for Fixing Screws and Fixing Washers for Buckets for Bucket Elevators
    IS 6833 : 1973 Specification for Buckets for Bucket Elevators
    IS 6834 : Part I : 1973 Specification for Conveyor Chains, Chain-Wheels and Attachments – Part I : Chains
    IS 6834 : Part II : 1976 Specification for Conveyor Chains, Chain-wheels and Attachments – Part II : Chain-wheels
    IS 6834 : Part III : 1976 Specification for Conveyor Chains, Chain-wheels and Attachments – Part III : Attachments
    IS 6835 : 1973 Specification for Drifts
    IS 6836 : 1973 Specification for Hand Snaps and Set-ups for Solid Rivets
    IS 6837 : 1973 Specification for Three Wheel Type Pipe Cutter
    IS 6838 : 1973 Dimensions for `O’ rings and grooves for vacuum flanges
    IS 6839 : Part 1 : 1994/ISO 2163 : 1975 Glossary of terms relating to non-powered materials handling equipment, Part 1 Castors IS 6839 : Part 2 : 1998 Glossary of terms relating to non-powered materials handling equipment, Part 2 Hand trucks and trolleys
    IS 6840 : 1972 Code of practice for preventive maintenance of agricultural wheeled tractor
    IS 6841 : 1973 Specification for Wrecking Bars
    IS 6843 : 1984 Technical supply conditions for pipe cutters
    IS 6844 : 1984 Specification for Wood and Leather Marking Punches
    IS 6845 : 1972 Specification for Wire Basket for Screening Ballast
    IS 6846 : 1972 General requirements for control unit for airturbine, dental
    IS 6847 : 1995 Code of practice for installation of agricultural wheeled tractor
    IS 6848 : 1979 Specification for Lead-acid Batteries for Train Lighting and Airconditioning Services
    IS 6849 : Part 1 : 1999 /ISO 1607-1 : 1993 Positive Displacement Vacuum Pumps – Measurement of Performance Characteristics IS 6849 : Part 2 : 1993/ISO 1607-2 : 1989 Positive displacement vacuum pumps – Measurement of performance characterstics IS 6849 : Part 3 : 1976 Methods of measurement of the performance characteristics of positive-displacement vacuum pumps Part IS 6850 : 1973 Specification for Agar, Microbiological Grade
    IS 6851 : 1973 Specification for Meat Extract, Microbiological Grade
    IS 6852 : 1973 Specification for Bile Salts, Microbiological Grade
    IS 6853 : 1973 Specification for Peptone, Microbiological Grade
    IS 6854 : 1973 Method of sampling and test for ingredients used in media for microbiological work
    IS 6855 : 1973 Method of Sampling for Liquid Dielectrics
    IS 6856 : 1972 Specification for Forceps, Extraction, Dental, Upper Root, Narrow Beak
    IS 6857 : 1972 Specification for Separator, Double-Bow, Dental
    IS 6858 : 1972 Specification for Forceps, Extraction, Dental, Lower Incisors, Cuspids and Bicuspids
    IS 6859 : 1972 Specification for Forceps Extraction, Dental, Upper Root, Wide Beak
    IS 6860 : 1973 Specification for Pin Punches
    IS 6861 : 1973 Specification for Engineers’ Scrapers
    IS 6862 : 1981 Specification for Clevis Pins
    IS 6863 : 1973 Specification for Clevis Pins with Head
    IS 6864 : 1984 Specification for Metal Marking Punches
    IS 6865 : 1973 Specification for Pallets for Use in ISO Series 1 Freight Containers
    IS 6866 : 1986 Specification for Forceps, Extraction, Dental, Upper Wisdom Tooth
    IS 6867 : 1972 Specification for Forceps, Extraction, Dental, Upper Root, Medium Beak
    IS 6868 : 1991 Dental instruments – Dental extraction forceps – Specification
    IS 6869 : Part I : 1973 Specification for Playground Equipment for Parks – Part I : General Requirements
    IS 6869 : Part II : 1973 Specification for Playground Equipment for Parks – Part II : Horizontal Bars
    IS 6869 : Part III : 1973 Specification for Playground Equipment for Parks – Part III : Horizontal Ladders
    IS 6869 : Part IV : 1973 Specification for Playground Equipment for Parks – Part IV : Jungle Gyms (or Castle Climbers)
    IS 6869 : Part V : 1973 Specification for Playground Equipment for Parks – Part V : Parallel Bars
    IS 6869 : Part 6 : 2002 Playground Equipment for Park – Specification – Part 6 : Swings
    IS 6870 : 1986 Specification for Pliers, Loop Bending, Dental
    IS 6871 : 1992 Wind Equipment – Distant Indicating – Specification
    IS 6873 : Part 1 : 1999 /CISPR 12 : 1997 Limits and Methods of Measurement of Radio Disturbance Characteristics – Part 1 : Vehicles, IS 6873 : Part 2 : 1999 – CISPR 14 : 1993 Limits and Methods of Measurement of Radio Disturbance Characteristics – Part 2 : Electrical IS 6873 : Part 3 : 1999 /CISPR 13 : 1996 Limits and Methods of Measurement of Radio Disturbance Characteristics – Part 3 : Sound IS 6873 : Part 4 : 1999 /CISPR 11 : 1997 Limits and Methods of Measurement of Radio Disturbance Characteristics – Part 4 : Industrial, IS 6873 : Part 5 : 1999 /CISPR 15 : 1996 Limits and Methods of Measurement of Radio Disturbance Characteristics – Part 5 : Electrical IS 6873 : Part 7 : 1999 /CISPR 22 : 1997 Limits and Methods of Measurement of Radio Disturbance Characteristics – Part 7 : Information IS 6874 : 1973 Method of Tests for Round Bamboos
    IS 6876 : 1972 Technical characteristics and testing of fork arms for forklift trucks
    IS 6877 : 1977 Specification for Cabinet, Instruments
    IS 6879 : 1973 Specification for Fabric for Target Banner, Radar Responsive
    IS 6880 : 1972 Specification for Machine, Sewian (Vermicelli)
    IS 6881 : 1973 Specification for Link Type Pipe Cutters
    IS 6882 : 1973 Platinum electrodes
    IS 6883 : 1973 Specification for Ballast Screen
    IS 6884 : 1983 Specification for Dental Silicate Cement
    IS 6885 : 1973 Method for Knoop hardness testing of metals
    IS 6886 : 1973 Method for dynamic force calibration of axial load fatigue testing machines by means of a strain gauge technique
    IS 6887 : 1986 Specification for Denture Base Polymer Resins
    IS 6888 : 1986 Specification for Dental Inlay Casting Wax
    IS 6889 : 2000 Chemical Analysis of Silver-tin Dental Amalgam Alloy – Method
    IS 6890 : Part 1 : 1989 Method for chemical analysis of dental gold alloys Part 1 Determination of gold, silver, palladium and platinum
    IS 6890 : Part II : 1975 Methods for Chemical Analysis of Dental Gold Alloys – Part II : Determination of Nickel and Zinc
    IS 6891 : 1973 Specification for Carpenters’ Auger Bits
    IS 6892 : 1973 Specification for Blacksmith’s Bick-Iron
    IS 6893 : Part 1 : 1988 Proforma for purchase specification for machine tools:Part 1 General purpose parallel lathes and precision IS 6893 : Part 2 : 1987 Proforma for purchase specification for machine tools:Part 2 Horizontal/universal knee-type milling machines
    IS 6893 : Part 3 : 1988 Proforma for purchase specification for machine tools:Part 3 Radial drilling machines
    IS 6893 : Part 4 : 1987 Proforma for purchase specification for machine tools:Part 4 Vertical turning and boring lathes
    IS 6893 : Part 5 : 1987 Proforma for purchase specification for machine tools:Part 5 Milling machine with table of variable height IS 6893 : Part 6 : 1985 Proforma for purchase specification for machine tools:Part 6 Bench/pillar type drilling machines
    IS 6893 : Part 7 : 1990 Proforma for purchase specification for machine tools:Part 7 External cylindrical grinding machines with IS 6893 : Part 8 : 1992 Proforma for purchase specification for machine tools:Part 8 Internal cylindrical grinding machines with IS 6893 : Part 9 : 1990 Proforma for Purchase Specification for Machine Tools – Part 9 : Surface Grinders with Horizontal Axis
    IS 6893 : Part 10 : 1992 Proforma for purchase specification for machine tools:Part 10 Copying lathes
    IS 6893 : Part 11 : 1992 Proforma for purchase specification for machine tools:Part 11 Capstan and turret lathes
    IS 6893 : Part 12 : 1992 Porforma for purchase specification for machine tools:Part 12 Horizontal boring and milling machines (IS 6894 : 1993 Malting Barley – Specification
    IS 6895 : 1973 Specification for Barely Malt
    IS 6896 : 1973 Connectors (two-way) for railway coach wiring
    IS 6899 : 1997 Textiles – High density polyethylene (HDPE) woven fabrics – Specification
    IS 6900 : 1973 Specification for Proofed Nylon Leno Fabric
    IS 6901 : 1988 Specification for pressure regulators for gas cylinders used in welding, cutting and related processes
    IS 6902 : 1973 Steel wire for spokes
    IS 6903 : 1973 Glossary of terms relating to sewing machines for household purposes
    IS 6904 : 1973 Specification for Receptacle, Waste
    IS 6905 : 1973 Specification for Instruments Table, Mayo’s Type
    IS 6907 : 1992 Method of sampling steel castings
    IS 6908 : 1991 Specification for asbestos cement pipes and fittings for sewerage and drainage
    IS 6909 : 1990 Specification for supersulphated cement
    IS 6910 : 1985 Method of testing corrosion resistance of electroplated and anodized aluminium coatings by acetic acid salt spray IS 6911 : 1992 Stainless steel plate, sheet and strip
    IS 6912 : 1985 Copper and copper alloy forging stock and forgings
    IS 6913 : 1973 Stainless steel tubes for the food and beverage industry
    IS 6916 : 1973 Code of practice for fabrication welding of steel castings
    IS 6917 : 1973 Glass lenses for automobile headlights (replaceable bulb type)
    IS 6918 : 2002 Mercaptobenzothiazole – Specification
    IS 6919 : 1973 Method for determination of wool fibres diameter by air-flow method
    IS 6920 : 1993/ISO 1532 : 1973 Fishing nets – Cutting knotted netting to shape (‘Tapering’)
    IS 6921 : 1973 Methods of sampling and test for lac and lac products
    IS 6922 : 1973 Criteria for safety and design of structures subject to underground blasts
    IS 6923 : 1973 Methods of test for performance of screed board concrete vibrators
    IS 6924 : 1973 Code of Practice for the Construction of Refuse Chutes in Multistoreyed Buildings
    IS 6925 : 1973 Methods of Test for Determination of Water Soluble Chlorides in Concrete Admixtures
    IS 6926 : 1996 Diamond Core Drilling – Site Investigation for River Valley Projects – Code of Practice
    IS 6928 : 2001 /ISO 6346 : 1995 Freight Containers – Coding, Identification and Marking
    IS 6930 : 1973 Dimensions for fixing arrangements of buckets for bucket elevators
    IS 6931 : 1972 Methods of test for printing inks
    IS 6932 : Part 1 : 1973 Method of test for building limes Part 1 Determination of insoluble residue, loss on ignition, insoluble matter, IS 6932 : Part 2 : 1973 Method of test for building limes Determination of carbon dioxide content
    IS 6932 : Part 3 : 1973 Method of test for building limes Determination of residue on slaking of quicklime
    IS 6932 : Part 4 : 1973 Method of test for building limes Determination of fineness of hydrated lime
    IS 6932 : Part 5 : 1973 Method of test for building limes Determination of unhydrated oxide
    IS 6932 : Part 6 : 1973 Method of test for building limes Determination of volume yield of quicklime
    IS 6932 : Part 7 : 1973 Method of test for building limes Determination of compressive and transverse strength
    IS 6932 : Part 8 : 1973 Method of test for building limes Determination of workability
    IS 6932 : Part 9 : 1973 Method of test for building limes Determination of soundness
    IS 6932 : Part X : 1973 Methods of Tests for Building Limes – Part X : Determination of Popping and Pitting of Hydrated Lime
    IS 6932 : Part 11 : 1983 Methods of Tests for Building Limes – Part 11 : Determination of Insoluble Setting Time of Hydrated Lime
    IS 6933 : 1973 35 mm portable motion picture projectors
    IS 6934 : 1998 Recommendations for hydraulic design of high ogee overflow spillways
    IS 6935 : 1973 Method for determination of water level in a bore hole
    IS 6936 : 1992 Guide for location, selection and hydraulic design of canal escapes
    IS 6937 : 1986 Overhead projectors
    IS 6938 : 1989 Code of practice for design of rope drum and chain hoists for hydraulic gates
    IS 6939 : 1992 Methods for determination of evaporation from reservoirs
    IS 6940 : 1982 Methods of Test for Pesticides and their Formulations
    IS 6941 : 1973 Method for sampling metal closures
    IS 6942 : 1973 Specification for Flask, Roux, Bacteriological, With or Without Offset Neck (1 000 ml Nominal Capacity
    IS 6943 : 1990 Medical Glass Instruments – Cover, glass used with haemocytometers
    IS 6944 : 1973 Specification for Bottle, Bijou, Bacteriological
    IS 6945 : 1973 Code of practice for packaging glass and glassware
    IS 6947 : Part I : 1973 Methods of Estimation of Composite Pigments in Oil Pastes and Ready Mixed Paints – Part I : Estimation IS 6947 : Part II : 1975 Methods of Estimation of Composite Pigments in Oil Pastes, Ready Mixed Paints and Enamels – Part II IS 6947 : Part III : 1975 Methods of Estimation of Composite Pigments in Oil Pastes, Ready Mixed Paints and Enamels – Part III IS 6948 : 1973 Ready mixed paint, undercoat, synthetic for ships
    IS 6949 : 1973 Summation current transformers
    IS 6950 : 1973 Specification for Pig Hooks
    IS 6951 : 1973 Specification for Ready Mixed Paint, Finishing, Exterior, for Ships
    IS 6952 : 1990 Engineering metrology – Cylindrical squares – Specification
    IS 6953 : 1973 Code of safety for bromine
    IS 6954 : 1973 Code of safety for caustic potash
    IS 6955 : 1973 Code of practice for subsurface exploration for earth and rockfill dams
    IS 6956 : 2001 Cover Paper – Specification
    IS 6957 : 1973 Specification for Curette, Blunt, Uterine
    IS 6958 : 1973 Specification for Knife, Decapitation
    IS 6959 : 1973 Specification for Embryotomy Scissors, Embryotomy, Curved on Flat
    IS 6960 : 1973 Specification for Catheters, Metal, Female
    IS 6961 : 1984 Specification for 3-bromobenzanthrone
    IS 6962 : 1991 3,9-Dibromobenzanthrone, technical-Specification
    IS 6963 : 1973 Pictorial marking on packages containing photographic materials sensitive to radiant energy
    IS 6964 : 2001 Electroacoustics – Octave-Band and Fractional-Octave-Band Filters
    IS 6965 : 1979 Switches for use in railway coaching stock
    IS 6966 : Part 1 : 1989 Guidelines for hydraulic design of barrages and weirs: Part 1 Alluvial Reaches
    IS 6967 : 1973 Steel for electrically welded round link chains
    IS 6968 : 1973 Code for hygienic condition for PAN (Betel leaf) stalls and vendors
    IS 6969 : 1973 Code for hygienic conditions for handling and sale of refrigerated drinking water
    IS 6971 : 1998 2-ethyl Hexan-1-OL – Specification
    IS 6972 : 1973 Specification for Benzotrichloride, Technical
    IS 6973 : 1973 Specification for Precision Angle Plates
    IS 6974 : 1973 Specification for Abdomen Guards for Sports Use
    IS 6975 : 1973 Specification for Reamer, Trochanteric, Orthopedic
    IS 6976 : 1973 Specification for Awl, Kuntscher, Diamond Pointed
    IS 6977 : 1973 1,5-Diaminoanthraquinone, technical
    IS 6978 : 2002 Chess Equipment – Specification
    IS 6979 : 1973 Specification for Cerebral Palsy Chair, Tubular, Institutional Model
    IS 6980 : 1983 Tetrasodium pyrophosphate, anhydrous, technical
    IS 6981 : 1992 Glass jars for air-depolarized primary (caustic soda) wet cells
    IS 6982 : 1973 Specification for Gauge for Intramedullary Nails
    IS 6985 : 1973 Specification for Precision Box Angle Plates
    IS 6986 : 1973 Specification for Forceps, Cranioclast and Cephalotribe Combined
    IS 6987 : 1973 Specification for Steel Precision Polygons
    IS 6988 : 2002 Fine (Bone) China Crockeryware – Specification
    IS 6989 : 1973 Specification for Chisel, Post-mortem
    IS 6990 : 1973 Specification for Knife, Brain, Post-mortem
    IS 6991 : 1985 Specification for Radiographic Cassettes
    IS 6992 : 1982 Specification for Cerebral Palsy Chair, Domestic Model
    IS 6993 : 1973 Specification for Pan Knee Joint
    IS 6994 : Part I : 1973 Specification for Industrial Safety Gloves – Part I : Leather and Cotton Gloves
    IS 6995 : 1973 Specification for Cruciform Below-Knee Joint
    IS 6996 : 1973 Specification for Knife, Cartilage
    IS 6997 : 1973 Test code for sugarcane crushers
    IS 6999 : 1973 Specification for Cannula, Artificial Insemination
    IS 7000 : 1973 Specification for General Purpose Maximum and Minimum Thermometers
    IS 7001 : 1989 Shot peening of steel parts – Specification
    IS 7002 : 1991 Prevailing Torque Type Hexagon Nuts (With Non-Metallic Insert), Style 1 Property Classes 5,8 and 10 – Specification
    IS 7003 : 1973 Code for hygienic conditions for sago (SABOODANA) manufacturing units
    IS 7004 : 1973 Specification for Yeast Extract, Microbiological Grade
    IS 7005 : 1973 Code for Hygienic Conditions for Production, Processing, Transportation and Distribution of Milk
    IS 7006 : 1973 Specification for Visual Acuity Test Charts
    IS 7007 : 1973 Specification for E.E.N.T. (Eye, Ear, Nose and Throat) Diagnostic Set
    IS 7008 : Part 1 : 1999 /ISO 2901 : 1993 ISO Metric Trapezoidal Screw Threads – Part 1 : Basic Profile and Maximum Material IS 7008 : Part 2 : 1988/ISO 2902 : 1977 ISO Metric trapezoidal screw threads Part 2 Pitch diameter combinations
    IS 7008 : Part 3 : 1988/ISO 2904 : 1977 ISO Metric trapezoidlal screw threads Part 3 Basic dimensions
    IS 7008 : Part 4 : 1999 /ISO 2903 : 1993 ISO Metric Trapezoidal Screw Threads – Part 4 : Tolerances
    IS 7009 : 1973 Specification for Optical Square (for surveying)
    IS 7010 : 1973 Specification for Pivots for Magnetic Compasses
    IS 7011 : 1973 Specification for Back-silvered Mirrors Used in Instrument Industry
    IS 7013 : 1981 Radio dial lamps
    IS 7014 : 1973 Specification for Length Bars
    IS 7016 : Part I : 1982 Methods of Test for Coated and Treated Fabrics – Part I : Determination of Roll Characteristics
    IS 7016 : Part 2 : 1981 Methods of test for coated and treated fabrics Part 2 Determination of breaking strength and extension at IS 7016 : Part III : 1981 Methods of Test for Coated and Treated Fabrics – Part III : Determination of Tear Strength
    IS 7016 : Part 4 : 2003 /ISO 7854 : 1995 Methods of Test for Coated and Treated Fabrics – Part 4 : Rubber – or Plastics-Coated IS 7016 : Part 5 : 2003 /ISO 2411 : 1991 Methods of Test for Coated and Treated Fabrics – Part 5 : Rubber- or Plastic-Coated Fabric IS 7016 : Part 6 : 1984 Methods of Test for Coated and Treated Fabrics – Part 6 : Determination of Bursting Strength
    IS 7016 : Part 7 : 1986 Methods of test for coated and treated fabrics: Part 7 Determination of resistance to penetration by water IS 7016 : Part 8 : 1975 Methods of test for coated and treated fabrics: Part 8 Accelerated ageing
    IS 7016 : Part 9 : 1988 Methods of test for coated and treated fabrics: Part 9 Determination of blocking resistance (first revision
    IS 7016 : Part 10 : 1997 /ISO 4675 : 1990 Methods of Test for Coated and Treated Fabrics – Part 10 : Rubber or Plastics-Coated IS 7016 : Part 11 : 1987 Methods of test for coated and treated fabrics: Part 11 Determination of flexibility – Flat loop method
    IS 7016 : Part 12 : 1987 Methods of test for coated and treated fabrics: Part 12 Determination of tack-tear resistance
    IS 7016 : Part 13 : 1987 Method of Test for Coated and Treated Fabrics – Part 13 : Determination of Crush Resistance
    IS 7016 : Part 14 : 1987 Methods of test for coated and treated fabrics: Part 14 Low temperature impact test
    IS 7017 : 1973 Method of colorimetric determination of traces of heavy metals by dithizone
    IS 7018 : Part 1 : 1983 Technical supply conditions for gauges: Part 1 General
    IS 7018 : Part 2 : 1983 Technical supply conditions for gauges:Part 2 Assembly and identification of plain plug gauges (size range IS 7018 : Part 3 : 1983 Technical supply conditions for gauges:Part 3 Assembly and identification of screw plug gauges for ISO IS 7019 : 1998 Glossary of terms in plastics and flexible packaging, excluding paper
    IS 7020 : 1973 Crystals and Dielectric Materials Used in Instrument Industry
    IS 7021 : 1973 Specification for Protein-Rich Food Supplements for Infants and Preschool Children
    IS 7022 : Part 1 : 1973 Glossary of terms relating to water, sewage and industrial effluents, Part I
    IS 7022 : Part II : 1979 Glossary of Terms Relating to Water, Sewage and Industrial Effluents – Part II
    IS 7026 : 1973 Specification for Hosiery Yarn, Worsted
    IS 7027 : 1984 Specification for Transistorized Ballasts Fluorescent Lamps
    IS 7028 : Part 1 : 2002 Performance Tests for Complete, Filled Transport Packages – Part 1 : Stacking Tests Using Static Load
    IS 7028 : Part 2 : 2002 Performance Tests for Complete, Filled Transport Packages – Part 2 : Vibration Test at Fixed Low Frequency
    IS 7028 : Part 3 : 2002 Performance Test for Complete, Filled Transport Packages – Part 3 : Horizontal Impact Tests (Horizontal IS 7028 : Part 4 : 1987 Performance tests for complete, filled transport packages: Part 4 Vertical impact drop test
    IS 7028 : Part 5 : 1987 Performance tests for complete, filled transport packages: Part 5 Rolling test
    IS 7028 : Part 6 : 1987 Performance tests for complete, filled transport packages: Part 6 Compression test
    IS 7028 : Part 7 : 2002 Performance Tests for Complete, Filled Transport Packages – Part 7 : Low Pressure Test
    IS 7028 : Part 8 : 2002 Performance Tests for Complete, Filled Transport Packages – Part 8 : Water Spray Test
    IS 7028 : Part 9 : 1987 Performance Tests for Complete, Filled Transport Packages – Part 9 : Stacking Test Using Compression IS 7028 : Part 10 : 1986 Performance tests for complete, filled transport packages:Part 10 Water immersion test
    IS 7028 : Part 11 : 1986 Performance tests for complete, filled transport packages: Part 11 Toppling test
    IS 7028 : Part 12 : 2002 Performance Tests for Complete, Filled Transport Packages – Part 12 : Vibration Test Using a Sinusoidal IS 7030 : 1988 Identification of parts for complete, filled transport packages when testing
    IS 7031 : 2002 Method of Conditioning for Testing of Complete, Filled Transport Packages
    IS 7032 : Part 1 to 8 : 1986 Physical methods of test for uncut Indian jute, Mesta and Bimli
    IS 7033 : 1973 Commercial moisture regain value for wool and its products
    IS 7034 : 1973 Specification for Wooden Staves Used for Drum Rollers of Jute Carding Machines
    IS 7036 : 1982 Specification for Table, Postmortem
    IS 7038 : 1973 Chloroplatinic acid (Platinum chloride)
    IS 7039 : 1973 Specification for Tube, Culture, Screw Cap
    IS 7040 : 1973 Specification for Smith’s Anvil Cutters
    IS 7041 : 1973 Specification for Carpenters’ Plain Brace
    IS 7042 : 1973 Specification for Carpenters’ Ratchet Brace
    IS 7043 : 1973 Specification for Loom (Fly) Spindles
    IS 7044 : 1973 Method for determination of sodium chlorite content in textile materials
    IS 7045 : 1973 Method for determination of hydrogen peroxide content in textile materials
    IS 7046 : 1993 Inland vessels – Harbour tugs – Guide for selection
    IS 7047 : 1973 Timbers used in instrument industry
    IS 7048 : 1991 Inland vessels – Small weathertight hatches – Specification
    IS 7049 : 1973 Code for handling, processing, quality evaluation and storage of poultry
    IS 7051 : 1973 Specification for Power Maize Shellers
    IS 7052 : 1973 Test code for power maize shellers
    IS 7053 : 1996 Meat and Meat Products – Basic Requirements for a Stall for Sale of Meat of Small and Large Animals
    IS 7054 : 1973 Specification for Casing for Bucket Elevators
    IS 7055 : 1973 Specification for Drivers, Kuntscher, Nail, Orthopaedic
    IS 7056 : 1989 Cotton Towelling and Towels – Specification
    IS 7058 : 1995 Table Wines – Specification
    IS 7060 : 1973 Specification for Blood Meal as Livestock Feed
    IS 7061 : 1973 Specification for Calcined Bone Meal as Livestock Feed Supplement
    IS 7062 : 1973 Glossary of terms used in gas industry
    IS 7063 : Part 1 : 1973 Methods of test for corrugated fibreboard : Part 1 Thickness of board
    IS 7063 : Part 2 : 1976 Methods of test for corrugated fibreboard: Part 2 Edgewise crush resistance of board
    IS 7063 : Part III : 1976 Methods of Test for Corrugated Fibreboard – Part III : Water Resistance of Glue bond by immersion
    IS 7063 : Part IV : 1976 Method of Test for Corrugated Fibreboard – Part IV : Determination of Substance of the Components Papers IS 7065 : 1973 Specification for Steering Wheels
    IS 7066 : 1973 Specification for Trays, Instrument-cabinet, Dental
    IS 7067 : 1973 Fluoboric acid and metal fluoborates for electroplating
    IS 7068 : 1973 Specification for 6.25 mm calibration tape
    IS 7069 : 2001 Benzothiazyl-2-Cyclohexyl Sulphenamide (CBS) – Specification
    IS 7070 : 1988 Wooden Shelving Racks, Adjustable and Non-Adjustable Type – Specification
    IS 7071 : Parts 1 to 3 : 1989 Ropes and Cordages – Methods of Physical Test
    IS 7071 : Part 4 : 1986 Methods of physical test for ropes and cordages: Part 4 Breaking load and elongation at break
    IS 7072 : 1973 Glossary of terms relating to emission spectroscopy
    IS 7073 : Part 1 : 1973 Glossary of terms relating to air cargo pallets and containers, Part 1 Air cargo pallets
    IS 7073 : Part 2 : 1983 Glossary of terms relating to air cargo pallets and containers Part 2 Air cargo containers
    IS 7074 : 1999/ISO 4171 : 1993 Air cargo equipment – Interline pallets
    IS 7075 : 1983 Specification for Cardboard Tubes Used as Cores for Jute Fabric Rolls
    IS 7076 : 1983 Specification for metal book ends
    IS 7077 : 1973 Specification for Bending Bars
    IS 7078 : 1973 Plastics used in instrument industry
    IS 7079 : 1995 Automotive vehicles – Hydraulic brake hose – Specification
    IS 7080 : Part 1 : 1992 MTP Suction Apparatus – Specification – Part 1 : Manually Operated
    IS 7080 : Part 2 : 1992 MTP Suction Apparatus – Specification – Part 2 : Electrical-cum-manually Operated
    IS 7080 : Part 3 : 1992 MTP Suction Apparatus – Specification – Part 3 : Electrically Operated
    IS 7081 : 1973 Specification for Stool, Revolving, for Hospital Use
    IS 7082 : 1973 Specification for Sisal Lines
    IS 7083 : 1973 Specification for Trolley, Medicine
    IS 7084 : 1973 Bitumen based filling conmpounds for electrical purposes
    IS 7085 : 1986 Specification for Polyester Blend Shirting – Market Varieties
    IS 7086 : Part I : 1973 Methods of Sampling and Test for Rubber Compounding Ingredients, : Part I
    IS 7087 : 1979 Ceramic tower packings
    IS 7088 : 1973 Recommended Practice for Anodizing Aluminium and its Alloys
    IS 7089 : 1973 Specification for Limited Supply Plugs
    IS 7090 : 1985 Guidelines for rapid mixing devices
    IS 7091 : 1973 Specification for Lifter, Bed, Adjustable
    IS 7092 : Part 1 : 1992 Aluminium Alloy Tubes for Irrigation Purposes – Specification – Part 1 : Welded Tubes
    IS 7092 : Part 2 : 1987 Specification for Aluminium Alloy Tube for Irrigation Purposes – Part 2 : Extruded Tube
    IS 7095 : 1973 Method for verification of Knoop hardness testing machines
    IS 7096 : 1981 Method for scleroscope hardness testing for metallic materials
    IS 7097 : 1973 Method for Calibration of Standardized Blocks for Verification of Knoop Hardness Testing Machines
    IS 7098 : Part 1 : 1988 Crosslinked polyethylene insulated PVC sheathed cables: Part 1 For working voltage upto and including IS 7098 : Part 2 : 1985 Crosslinked polyethylene insulated PVC sheathed cables: Part 2 For working voltages from 3.3 kV upto IS 7098 : Part 3 : 1993 Cross-linked polyethylene insulated thermoplastic sheathed cables: Part 3 For working voltages from 66 IS 7099 : 1973 Specification for Trolley, Dressing Drum
    IS 7100 : 1973 Specification for Hook, Decapitation, Jardine’s Pattern
    IS 7101 : 1994 Coconut diethanolamide for cosmetic industry- Specification
    IS 7102 : 1973 Specification for Screw, Bone, Leinbach, Medullary
    IS 7103 : 1973 Specification for Scissors, Episiotomy
    IS 7104 : 1973 Specification for Poplin (Market Variety)
    IS 7105 : Part 1 : 1973 Specification for Extractor for Kuntscher Nail – Part 1 : Handle type
    IS 7105 : Part 2 : 1986 Specification for Extractor for Kuntscher Nail – Part 2 : Striker Type
    IS 7106 : 1973 Specification for Extractor, Staple, Orthopaedic
    IS 7107 : 1973 Specification for Punch, Staple, Orthopaedic
    IS 7108 : 1973 Specification for Hammer for Kuntscher Nail Extractor
    IS 7109 : 1973 Specification for Starter, Staple, Orthopaedic
    IS 7110 : 1984 /ISO 5837-2 : 1980 Specification for Pins, Rush, Intramedullary
    IS 7111 : 1973 Specification for Inserter, Staple, Orthopaedic
    IS 7112 : 2002 Criteria for Design of Cross-Section for Unlined Canals in Alluvial Soil
    IS 7113 : 2003 Soil-Cement Lining for Canals – Code of Practice
    IS 7114 : 1973 Criteria for hydraulic design of cross regulators for canals
    IS 7115 : 1973 Specification for Apparatus, Tubal Patency
    IS 7116 : 1973 Specification for Forceps, Midwifery, Short
    IS 7117 : 1973 Specification for Scissors, Umbilical Cord
    IS 7118 : 1973 Recommendations for direction of movement for control devices operating electrical apparatus
    IS 7119 : 1973 Specification for Cotton Cloth for PAGRIS and PAGS
    IS 7121 : 1973 Specification for Carbaryl Water Dispersible Powder Concentrates
    IS 7122 : 1984 Specification for Carbaryl Dusting Powders
    IS 7123 : 1993 Hair Oils – Specification
    IS 7124 : 1973 Specification for Gun Powder
    IS 7125 : 1974 Technical supply conditions for carpenters’ braces
    IS 7126 : 1973 Specification for Fenitrothion Dusting Powders
    IS 7127 : 1973 Specification for Tryptone, Microbiological Grade
    IS 7128 : 1973 Specification for Proteose Peptone, Microbiological Grade
    IS 7129 : 1992 Potassium carbonate, anhydrous
    IS 7130 : 1994 Chlorosulphonic acid, technical
    IS 7131 : 1973 Specification for Nitrophosphate Based Granulated Fertilizers
    IS 7132 : 1973 Guide for testing synchronous machines
    IS 7133 : 1985 Specification for Cotton Tyre Cord and Warp Sheet for Cycle and Rickshaw
    IS 7134 : 1973 Specification for Diphenyl
    IS 7135 : 1987 Specification for Dimethyl Sulphate, Technical
    IS 7136 : 1973 Specification for Megaphones
    IS 7137 : 1973 Portable, hand held mains-operated electric massagers
    IS 7138 : 1973 Steel tubes for furniture purposes
    IS 7139 : 1991 Orthodontic pliers, arrow headed,clasp forming – Shape, dimensions and tests
    IS 7140 : 1971 Symbols and notations for correction of illustrations and illustration proofs
    IS 7141 : 1991 Dental Instruments – Orthodontic Pliers, Band Forming, Peak’s Pattern – Shape, Dimensions and Tests
    IS 7142 : 1995 Welded low carbon steel cylinders for low pressure liquifiable gases not exceeding 5 litre water capacity – Specificatiom
    IS 7143 : 1973 Specification for Crab Meat Canned in Brine
    IS 7144 : 1973 Methods of measurements on camera tubes
    IS 7145 : 1973 Technical supply condition for torque wrenches
    IS 7146 : Part 1 : 1973 Methods of measurement on photosensitive devices: part 1 Basic considerations
    IS 7146 : Part 2 : 1974 Methods of measurement on photosensitve devices: Part 2 Photo tubes
    IS 7146 : Part 3 : 1974 Methods of measurement on photosensitve devices: Part 3 Photoconductive cells for use in the visible spectrum
    IS 7146 : Part 4 : 1974 Methods of measurement on photosensitive devices:Part 4 Photomultipliers
    IS 7147 : Part I : 1973 Specification for Steel Bins for Domestic Storage – Part I : Gharelu Kothi
    IS 7148 : 1980 Ferro alloys for welding industry
    IS 7149 : 1973 Specification for Fibreboard Boxes for Canned Sea Foods for Export
    IS 7150 : 1974 Specification for library catalogue and abstract card
    IS 7151 : 1991 Corrugated Fibreboard Boxes for Para-Dropping of Supplies – Specification
    IS 7152 : 1992 Book room doors – Specifications
    IS 7154 : 1994 Mains-operated electric hair-dryers
    IS 7155 : Part 1 : 1986 Code of recommended practice for conveyor safety:Part 1 General information
    IS 7155 : Part 2 : 1986 Code of recommended practice for conveyor safety:Part 2 General safety requirements
    IS 7155 : Part 3 : 1986 Code of recommended practice for conveyor safety: Part 3 Belt conveyors and feeders
    IS 7155 : Part 4 : 1990 Code of recommended practice for conveyor safety: Part 4 Vibrating conveyor/feeder
    IS 7155 : Part 5 : 1990 Code of recommended practice for conveyor safety: Part 5 Apron conveyors/Apron feeders
    IS 7155 : Part 6 : 1990 Code of Recommended Practice for Conveyor Safety – Part 6 : Selection, Training and Supervision of Operators
    IS 7155 : Part 7 : 1990 Code of recommended practice for conveyor safety: Part 7 Inspection and maintenance
    IS 7155 : Part 8 : 1994 Code of recommended practice for conveyor safety Part 8 Flight conveyors (scraper conveyors)
    IS 7156 : 1974 General requirements for reverse circulation drilling rigs
    IS 7157 : 1987 Specification for Portable Pneumatic Grinding Machines
    IS 7159 : 1984 Methods of test for henna powder
    IS 7160 : 2003 Guide for Print Area, Margins and Type Sizes for Textbooks
    IS 7160 : Part 1 : 1974 Guide for print area, margins and type sizes for textbooks : Part 1 Textbooks in English
    IS 7160 : Part 2 : 1974 Guide for print area, margins and type sizes for textbooks : Part 2 Textbooks in Hindi
    IS 7160 : Part 3 : 1977 Guide for Print area, margins and type sizes for textbooks : Part 3 Textbooks in Malayalam
    IS 7160 : Part 4 : 1977 Guide for print area, margins and type sizes for textbooks : Part 4 Textbooks in Telugu
    IS 7160 : Part 5 : 1977 Guide for print area, margins and type sizes for textbooks : Part 5 Textbooks in Kannada
    IS 7160 : Part 6 : 1977 Guide for print area, margins and type sizes for textbooks : Part 6 Textbooks in Tamil
    IS 7160 : Part 7 : 1980 Guide for print area, margins and type sizes for textbooks : Part 7 Textbooks in Bengali
    IS 7161 : 1973 Specification for Vegetable Parchment or Greaseproof Paper/Aluminium Foil Laminate for Wrapping Butter
    IS 7162 : 1973 Specification for Waxed Cartons for Packaging of Ice-Cream
    IS 7163 : 1989 Potassium iodide, pure and analytical reagent
    IS 7164 : 1973 Specification for Stopper
    IS 7166 : 1985 Specification for Cellulose Secondary Acetate Flakes
    IS 7167 : 1974 Code for selection and use of bucket elevators
    IS 7168 : 1973 Specification for Warfarin Sodium Salt Water Soluble Powders
    IS 7169 : 1989/ISO 1483 : 1983 Slotted raised countersunk (oval) head tapping screws (common head style)
    IS 7170 : 1989/ISO 1482 : 1983 Slotted countersunk (flat) head tapping screws (common head style)
    IS 7171 : 1974 Specification for Drip Counter with Filter
    IS 7172 : 1984 Method for verification of scleroscope hardness testing machines
    IS 7173 : 1989/ISO 1481 : 1983 Slotted pan head tapping screws
    IS 7174 : 1974 Carbon steel tubes for use on board ships for working pressure 0.7 to 1.7 N/mm2
    IS 7175 : 1974 Specification for Cots for Top Rollers
    IS 7176 : 1985 Specification for Anaesthetic Apparatus, Drawover Portable Type
    IS 7177 : 1974 Specification for Centre Punches
    IS 7178 : 2002 Heat-Treated Steel Tapping Screws – Mechanical Properties
    IS 7179 : 1973 Specification for Disposable Plastic Artificial Insemination Pipettes for Cattle
    IS 7180 : 1973 Specification for Disposable Artificial Insemination Gloves
    IS 7181 : 1986 Horizontally cast iron double flanged pipes for water, gas and sewage
    IS 7182 : 1973 Methods of tests for aluminium collapsible tubes
    IS 7183 : 1973 Specification for Flask, Culture, Haffkine
    IS 7185 : 1981 Specification for Boiler, Milk Aluminium
    IS 7186 : 1973 Glossary of terms relating to paper and flexible packaging
    IS 7187 : 1989 Ice Cream Cones – Specification
    IS 7188 : 1974 Methods of test for cellulose acetate flakes
    IS 7190 : 1974 Methods of determination of bulk density of coke
    IS 7191 : 2001 Tomatoes – Guide for Cold Storage and Refrigerated Transport
    IS 7192 : 1974 Guide for storage of citrus fruits
    IS 7193 : 1994 Specification for glass fibre base bitumen felts
    IS 7194 : 1994 /ISO 1999 : 1990 Assessment of Noise Exposure During Work for Hearing Conservation Purpose
    IS 7196 : 1974 Specification for hold fast
    IS 7197 : 1974 Specification for double action floor springs (without oil check) heavy door
    IS 7198 : 1974 Code of practice for damp-proofing using bitumen mastic
    IS 7199 : 1974 Specification for Blast Furnace Stove Refractories
    IS 7200 : Part 1 : 1989 Presentation of statistical data:Part 1 Tabulation and summarization
    IS 7200 : Part 2 : 1975 Presentation of statistical data:Part 2 Diagrammatic representation of data
    IS 7200 : Part 3 : 1982 Presentation of Statistical Data – Part III : Management Information Systems – Quality Control
    IS 7201 : Part 1 : 1987 Methods of Sampling for Agricultural Machinery and Equipment – Part 1 : Hand-tools and Hand-operated/IS 7202 : 1974 Specification for Inspection Gauges for Checking Threads of Gas Cylinder Valves for Use with Breathing Apparatus
    IS 7203 : 1973 Specification for Casein Hydrolysate (Acid Digested), Microbiological Grade
    IS 7204 : Part 1 : 1974 Stabilized power supplies dc output: Part 1 Terms and definitions
    IS 7204 : Part 2 : 1980 Stabilized power supplies dc output: Part 2 Rating and performance
    IS 7204 : Part 3 : 1980 Stabilized power supplies dc output: Part 3 Radio frequency interference tests
    IS 7204 : Part 4 : 1980 Stabilized power supplies dc output: Part 4 Tests other than radio-frequency interference
    IS 7205 : 1974 Safety Code for Erection of Structural Steelwork
    IS 7206 : Part 1 : 1986 General requirements for direct circulation rotary drilling rigs:Part 1 With rotary table
    IS 7207 : 1992 Criteria for design of generator foundation for hydroelectric power stations
    IS 7208 : 1992 Guidelines for flocculator devices
    IS 7209 : 1974 General requirements for blast hole drilling rigs
    IS 7211 : 1973 Specification for Mincer, Hand Operated, Clamp Type
    IS 7212 : 1974 Methods of determination of copper
    IS 7214 : 1974 Specification for Driving Squares for Hand Socket Wrenches
    IS 7215 : 1974 Tolerances for fabrication of steel structures
    IS 7216 : 1974 Specification for Handloom Cotton Angavastram
    IS 7217 : 1990 Classification and nomenclature of powered industrial trucks
    IS 7219 : 1973 Method for determination of protein in foods and feeds
    IS 7220 : 1974 Specification for Ethylenediaminetetra-acetic Acid, Pure and Technical
    IS 7223 : 1986 Potassium chloride, analytical reagent
    IS 7224 : 1985 Specification for Iodized Salt
    IS 7225 : 1985 Dental cobalt chromium casting alloy
    IS 7226 : 1974 Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes
    IS 7227 : 1974 Recommended diameters of wheels for woodworking table bandsawing machines
    IS 7228 : 1983/ISO 7006 : 1981 Recommended spindle diameters for woodworking machines with rotating bored tools
    IS 7229 : 1974 Recommended working level heights for woodworking machines
    IS 7230 : 1974 Specification for Plain Spool For Tractor Operated Disc Harrows
    IS 7231 : 1994 Specification for plastic flushing cisterns for waterclosets and urinals
    IS 7232 : 1974 Method for imhoff cone test
    IS 7233 : 1991 Pesticide – 2, 4-D, Ethyl Ester Technical Specification
    IS 7234 : 1974 Method for estimation of folic acid in foodstuffs
    IS 7235 : 1974 Method for Estimation of Tocopherols (vitamin E) in Foodstuffs
    IS 7236 : 1974 Glossary of terms for coffee and its products
    IS 7237 : 1997 Carob Bean Gum, Food Grade – Specification
    IS 7238 : 1997 Tragacanth Gum, Food Grade – Specification
    IS 7239 : 1974 Specification for Gum Ghatti, Food Grade
    IS 7241 : 1981 Glossary of terms used in gas cylinder technology
    IS 7242 : 1974 Specification for concrete spreaders
    IS 7243 : 1974 Specification for Sunshine Recorder
    IS 7244 : 1974 Specification for Thermometer for Mercury Barometer
    IS 7245 : 1974 Specification for concrete pavers
    IS 7246 : 1974 Recommendations for use of table vibrators for consolidating concrete
    IS 7247 : Part I : 1974 Code of Practice for Fumigation of Agricultural Produce – Part I : Methyl Bromide
    IS 7247 : Part II : 1974 Code of Practice for Fumigation of Agricultural Produce – Part II : Ethylene Dibromide
    IS 7247 : Part III : 1974 Code of Practice for Fumigation of Agricultural Produce – Part III : Aluminium Phosphide
    IS 7247 : Part IV : 1975 Code of Practice for Fumigation of Agricultural Produce – Part IV : Ethylene Dichloride and Carbon Tetrachloride IS 7247 : Part V : 1985 Code of Practice for Fumigation of Agricultural Produce – Part 5 : Genreal Requirements
    IS 7248 : 1973 Cargo gear particulars book
    IS 7249 : 1993/ISO 7568 : 1986 Woodworking machines – Thickness planing machines with rotary cutterblock of one-side dressing IS 7250 : 1995 Method of test for evaluation of insectproofness of woollen textiles
    IS 7251 : 1974 Specification for concrete finishers
    IS 7252 : 1974 Guide for testing of physical conditions in cold stores
    IS 7255 : Part 1 : 1974 Methods of chemical analysis of solders for use in goldware Part 1 Determination of gold, silver and copper
    IS 7255 : Part II : 1977 Methods of Chemical Analysis of Solders for Use in Goldware – Part II : Determination of Cadmium and IS 7257 : 1973 Specification for Trunks, Steel, Domestic
    IS 7258 : 1990 /ISO 7009 : 1983 Woodworking Machines – Single Spindle Moulding Machines – Nomenclature and Acceptance IS 7259 : Part 1 : 1988 Specification for wooden beds:Part 1 for use with mattresses
    IS 7260 : 1974 Specification for Ethyl Ester of Beta- Apo-8′-Carotenoic Acid, Food Grade
    IS 7261 : 1985 Dimensions of top-plates for castors
    IS 7262 : 1996 Turning Mandrels – Specification
    IS 7263 : 1973 Directions of operation of toggle switches on aircraft
    IS 7264 : 1974 Dimensions for aircraft pressure refuelling connections
    IS 7265 : 1973 Coating Materials (Metals, Alloys and Dielectrics) Used in Optical Instrument Industry
    IS 7266 : 1991/ISO 7946 : 1985 Test chart for woodworking slot mortising machines
    IS 7267 : 1991/ISO 7571 : 1986 Test chart for woodworking surface planing machines with cutterblock for one-side dressing
    IS 7268 : 1974 Click type torque wrenches
    IS 7269 : 1974 Numbering of aircraft engines, engine cylinders, combustion chambers and direction of rotation of engines and IS 7272 : Part I : 1974 Recommendation for Labour Output Constants for Building Work – Part I : North Zone
    IS 7273 : 1974 Method of testing fusion welded joints in aluminium and aluminium alloys
    IS 7274 : 1973 Referencing system of aircraft zones, access doors and panels
    IS 7276 : 1989 Non-expendable general purpose, flat pallets for through transit of goods – Specification
    IS 7278 : 1993 Methyl chloride – Specification
    IS 7279 : 1992 /ISO 7945 : 1985 Test Chart for Woodworking Single Spindle Boring Machines
    IS 7280 : 1974 Bare wire electrodes for submerged arc welding of structural steels
    IS 7282 : 1975 Specification for Chisel, Labyrinth, Straight, Lake’s Pattern
    IS 7283 : 1992 Hot rolled bars for production of bright bars and machined parts for enginner ing applications
    IS 7285 : 1988 Specification for Seamless Steel Cylinders for Permanent and High Pressure Liquefiable Gases
    IS 7286 : 1991/ISO 7950 : 1985 Test chart for woodworking single chain mortising machines
    IS 7287 : 1974 Recommended working dimensions of woodworking machines
    IS 7289 : 1992/ISO 7569 : 1986 Test chart for woodworking planing machines for two, three or four-side dressing
    IS 7290 : 1979 Recommendations for use of polyethylene film for water-proofing of roofs
    IS 7291 : 1981 High speed tool steels
    IS 7293 : 1974 Safety code for working with connstruction machinery
    IS 7294 : 1990/ISO 7008 : 1983 Woodworking machines – Single blade circular saw benches with or without travelling table – Nomenclature IS 7295 : 1974 Specification for Chamotte
    IS 7296 : 1992 /ISO 7570 : 1986 Test Chart for Woodworking Surface Planing and Thickness Machines
    IS 7297 : 1974 Olivine sand and flour for use in steel foundries
    IS 7298 : 1973 Specification for Cotton Webbing, Proofed and Unproofed
    IS 7299 : 1974 Specification for Mineral Oil for Cosmetic Industry
    IS 7300 : 1995 Methods of Regression and Correlation
    IS 7301 : 1974 Specification for Grinding Mandrels
    IS 7302 : 1974 Specification for Valve Fittings for Gas Cylinder Valves for Use with Breathing Apparatus
    IS 7303 : 1974 Covered electrodes for surfacing of metal by manual arc welding
    IS 7304 : Part I : 1978 Code for Fabrication, Installation and Testing of Salt Water Piping System for Shipboard Use – Part I : General IS 7304 : Part 2 : 1973 Code for fabrication, installation and testing of salt water piping system for shipboard use, Part 2 Non-ferrous IS 7304 : Part 3 : 1973 Code for fabrication, installation and testing of salt water piping system for shipboard use, Part 3 Ferrous IS 7305 : 1984 Specification for Fixed Capacitors Used in Electronic Equipment
    IS 7306 : 1974 Methods for determining synchronous machin quantities from tests
    IS 7307 : Part 1 : 1974 Approval tests for welding procedures Part 1 fusion welding of steel
    IS 7308 : 1999 Non-coniferous Logs – Specification
    IS 7309 : 1993 Reach and straddle forklift trucks – Method of stability test
    IS 7310 : Part I : 1974 Approval Tests for Welders Working to Approved Welding Procedures – Part I : Fusion Welding of Steel
    IS 7312 : 1993 Welded and seamless steel dissolved acetylene gas cylinders – Specification
    IS 7313 : 1974 Glossary of Important Fish Species of India
    IS 7314 : 1974 Glossary of terms relating to port and harbour engineering
    IS 7315 : 1974 Guidelines for Design, Installation and Testing of Timber Seasoning Kilns (Compartment Type with Cross-forced IS 7316 : 1974 Specification for decorative plywood using plurality of veneers for decorative faces
    IS 7317 : 1993 Code of practice for uniaxial jacking test for deformation modulus of rock
    IS 7318 : Part I : 1974 Approval Test for Welders When Welding Procedure Approval is Not Required – Part I : Fusion welding of IS 7318 : Part II : 1974 Approval Tests for Welders when Welding Procedure Approval is not Required – Part II : Tig or Mig Welding IS 7319 : 1974 Specification for perforated concrete pipes
    IS 7320 : 1974 Specification for concrete slump test apparatus
    IS 7321 : 1974 Code of practice for selection, handling and erection of concrete poles for overhead power and telecommunication IS 7322 : 1985 Specification for specials for steel cylinder reinforced concrete pipes
    IS 7323 : 1994 Operation of reservoirs – Guidelines
    IS 7324 : 1983 Brix hydrometers
    IS 7325 : 1974 Specification for apparatus for determining constituents of fresh concrete
    IS 7326 : Part 1 : 1992 Penstock and turbine inlet butterfly valves for hydropodwer stations and systems: Part 1 Criteria for structural IS 7326 : Part 2 : 1992 Penstock and turbine inlet butterfly valves for hydropower stations and systems: Part 2 Guidelines for design IS 7326 : Part 3 : 1976 Penstock and turbine inlet butterfly valves for hydropower stations and systems: Part 3 Recommendations IS 7327 : 1991 Engineering metrology – Measuring equipment – Granite surface plates – Specification
    IS 7328 : 1992 High Density Polyethylene Materials for Moulding and Extrusion – Specification
    IS 7329 : 1974 Specification for Metal Lasts for Safety Rubber-canvas Ankle Boots
    IS 7330 : 1988 Methods of sampling and test for ion-exchange resins
    IS 7331 : 1981 Code of practice for inspection and maintenance of cross-drainage works
    IS 7332 : Part 1 : 1991 Spherical Valves for Hydropower Stations and Systems – Part 1 : Criteria for Structural and Hydraulic Design
    IS 7332 : Part 2 : 1993 Spherical valves for hydropower stations and systems: Part 2 selection of control equipment
    IS 7332 : Part 3 : 1994 Spherical valves for hydropower stations and systems: Part 3 Recommendations for operation and maintenance IS 7333 : 1991 Orthodontic pliers, spring forming – Shape and dimensions
    IS 7334 : 1988 Specification for Pliers, Clasp Adjusting, Dental
    IS 7335 : 1974 Specification for Pliers, Closing Loop, Nance Type, Dental
    IS 7336 : 1974 Specification for Pliers, Tie Back, Nance Type, Dental
    IS 7337 : 1985 Glossary of terms in project network analysis
    IS 7338 : 1991 Orthodontic pliers, band removing, posterior – Shape and dimensions
    IS 7339 : 1988 Specification for Pliers, Anterior Band Removing, Dental
    IS 7340 : 1974 Pliers, pin and ligature cutting, dental
    IS 7342 : 1974 Specification for Commercial Gas Baking and Roasting Oven
    IS 7343 : 1986 Code of practice for ultrasonic testing of ferrous welded pipes and tubular products
    IS 7344 : 1974 Specification for bamboo tent poles
    IS 7345 : 1994 Cardiovascular Surgery Instruments – Anastomosis Forceps and Clamps – Patterns, Shapes and Dimensions
    IS 7346 : 1987 Specification for Raspatories, Rib, Semb’s Pattern
    IS 7347 : 1974 Specification for Performance of Small Size Spark Ignition Engines
    IS 7348 : Part 1 : 2003 /ISO 1942-1 : 1989 Dental Vocabulary – Part 1 : General and Clinical Terms
    IS 7348 : Part 2 : 2003 /ISO 1942-2 : 1989 Dental Vocabulary – Part 2 : Dental Materials
    IS 7348 : Part 3 : 2003 /ISO 1942-3 : 1989 Dental Vocabulary – Part 3 : Dental Instruments
    IS 7348 : Part 4 : 1994/ISO 1942-4 : 1989 Dental vocabulary Part 4 : Dental equipment
    IS 7348 : Part 5 : 1994/ISO 1942-5 : 1989 Dental vocabulary Part 5 Terms associated with testing
    IS 7349 : 1989 Guidelines for operation and maintenance of barrages and weirs
    IS 7350 : 1974 Specification for Needles, Spinal
    IS 7351 : 1985 Specification for Styrenated Phenol
    IS 7352 : 1974 Specification for X-ray Lead-rubber Protective Aprons
    IS 7353 : 1974 Specification for Blade for Tractor-Operated Terracer
    IS 7354 : Part 1 : 1975 Guide on reliability of electronic and electrical items: Part 1 Preliminary reliability considerations
    IS 7354 : Part 2 : 1984 Guide on Reliability of Electronic and Electrical Items – Part 2 : Reliability and Maintainability Management
    IS 7354 : Part 3 : 1984 /IEC 319 : 1978 Guide on Reliability of Electronic and Electrical Items – Part 3 : Presentation of Reliability IS 7354 : Part 4 : 1974 Guide on reliability of electronic and electrical items: Part 4 Collection of reliability,availability and maintainability IS 7354 : Part 5 : 1975 Guide on reliability of electronic and electrical items: Part 5 Inclusion of lot-by-lot and periodic inspection IS 7354 : Part 6 : 1983 Guide on reliability of electronic and electrical items: Part 6 Inclusion of reliability clauses into specifications IS 7355 : 1987 Specification for Spreader, Rib, Tuffier’s Pattern, Adult Size
    IS 7356 : Part 1 : 2002 Code of Practice for Installation, Maintenance and Observation of Instruments for Pore Pressure Measurements IS 7356 : Part 2 : 2003 Installation, Observation and Maintenance of Instruments for Pore Pressure Measurements in Earth and IS 7357 : 1974 Code of practice for structural design of surge tanks
    IS 7358 : 1984 Specification for Thermocouples
    IS 7359 : 1992 1-Chloroanthraquinone, Technical – Specification
    IS 7360 : 1992 1, 5-Dichloroanthraquinone, Technical – Specification
    IS 7362 : 1986 Specification for Tobias Acid
    IS 7363 : 1993 Inland vessels – Test and trials for harbour tugs
    IS 7364 : 1986 Specification for 3-nitro-4-aminotoluene
    IS 7365 : 1985 Criteria for hydraulic design of bucket type energy dissipators
    IS 7366 : 1974 Edge type filters required for filtration of oils of straight mineral type
    IS 7367 : 1987 Specification for Clamps, Coarctation, Potts’ Pattern, Straight and Angular
    IS 7368 : 1990 Grooved pins – Full length taper grooved – specification
    IS 7369 : 1983 Specification for Wheels and Castors
    IS 7370 : 1974 Specification for Razors, Safety
    IS 7371 : 1982 Specification for Steel, Safety Razor Blades
    IS 7372 : 1995 Lead-acid storage batteries for motor vehicles (first revision of IS 7372) – Specification
    IS 7373 : 2003 Hip Disarticulation Joint Unit for Lower Limb Prosthetic Fitments – Specification
    IS 7374 : 1974 Specification for Glass Rods and Tubing for Laboratory Glassware
    IS 7375 : 1979 Specification for Salseed Fat
    IS 7376 : 1980 Specification for Culinary Measures for Household Purposes
    IS 7378 : 1974 Specification for Bed, Fowler’s, Hospital
    IS 7379 : 1987 Specification for Clamps, Patent Ductus, Potts’ Pattern, Straight and Angular
    IS 7381 : 1986 Hand operated square drive socket wrenches
    IS 7382 : 1987 Specification for Shears, Rib, Price Thomas’ Pattern
    IS 7383 : 1990 Grooved pins – Third length centre grooved – Specification
    IS 7384 : 1990 Grooved pins – Full length parallel grooved, with pilot – Specification
    IS 7385 : 1990 Grooved Pins – Half Length Taper Grooved – Specification
    IS 7386 : 1990 Grooved pins – Half length reverse taper grooved – Specification
    IS 7387 : 1974 Specification for Needle, Biopsy, Liver, Silverman’s Pattern
    IS 7388 : 1992 Surgical instruments – Forceps,tissue,Allis pattern – Shape, size and dimensions
    IS 7389 : 1974 Specification for Pressurized Enclosures of Electrical Equipment for Use in Hazardous Areas
    IS 7389 : Part 1 : 1976 Pressurized enclosures of electrical apparatus for use in explosive atmospheres: Part 1 Pressurized enclosures IS 7390 : 1986 3150 Hz flutter test film for 35 mm motion picture sound reproducers, photographic type
    IS 7391 : Part 1 : 1974 Cotton covered copper conductors : Part 1 Round conductors
    IS 7391 : Part 2 : 1974 Cotton covered copper conductors : Part 2 Rectangular conductors (superseding IS:2068)
    IS 7393 : 1974 Specification for Adhesive, Bitumen Emulsion
    IS 7394 : 1984 Specification for Plastics Containers for Reserve Fuel
    IS 7395 : 1989 Gum Ghatti – Specification
    IS 7396 : Part 1 : 1985 Criteria for hydraulic design of surge tanks: Part 1 Simple, restricted orifice and differential surge tanks
    IS 7396 : Part 2 : 1985 Criteria for hydraulic design of surge tanks: Part 2 Tail race surge tanks
    IS 7396 : Part 3 : 1990 Criteria for hydraulic design of surge tanks: Part 3 Special surge tanks
    IS 7396 : Part 4 : 1983 Criteria for Hydraulic Design of Surge Tanks – Part 4 : Multiple Surge Tanks
    IS 7397 : 1986 B-chain electro-acoustic response of motion picture sound reproduction system
    IS 7398 : 1974 Specification for Forceps, Bone Holding, Farabeuf’s Pattern
    IS 7399 : 1987 Specification for Knife, Sternum, Lebsche’s Pattern
    IS 7400 : 1974 Guide for preparation and production of textbooks
    IS 7401 : 1987 Specification for Paraffin Wax for Explosive and Pyrotechnic Industry
    IS/ISO 7402 : 1993 Microbiology – General Guidance for the Enumeration of Enterobacteriaceae without Resuscitation – MPN Technique IS 7402 : 1986 Specification for Filters for Drinking Water Purposes
    IS 7403 : 1974 Code of practice for selection of standard worm and helical gear boxes
    IS 7404 : Part 1 : 1991 Paper Covered Copper Conductors – Specification – Part 1 : Round Conductors
    IS 7405 : Part 1 : 1994 Specification for printed wiring boards: Part 1 General requirements and methods of test
    IS 7405 : Part 2 : 1984 Specification for printed wiring boards: Part 2 Single and double sided printed boards with plain holes
    IS/ISO 7406 : 1986 Bore Type Milling Cutters for Indexable Inserts – Designation
    IS 7406 : Part 1 : 1984 Specification for Jute Bags for Packing Fertilizers – Part 1 : Laminated Bags Manufactured From 407 g/m IS 7406 : Part 2 : 1986 Specification for Jute Bags for Packing Fertilizers – Part 2 : Laminated Bags Manufactured from 380 g/m, IS 7407 : Parts I to III : 1980 Specification for Jute Tarpaulin Fabric
    IS 7408 : Part 1 : 2000 Blow Moulded Polyolefin Containers – Specification – Part 1 : Up to 5 Litres Capacity
    IS 7408 : Part 2 : 2000 Blow Moulded Polyolefin Containers – Specification – Part 2 : Over 5 Litres, Up to and Including 60 Litres IS 7408 : Part 3 : 2000 Blow Moulded Polyolefin Containers – Specification – Part 3 : Closed Head Containers Over 60 Litres, up IS 7409 : Part 1 : 1994/ISO 5356-1 : 1987 Anaesthetic and respiratory equipment – Conical connectors Part 1: Cones and sockets
    IS 7409 : Part 2 : 1994/ISO 5356-2 : 1987 Anaesthetic and respiratory equipment – Conical connectors Part 2: Screw threaded IS 7410 : Part 1 : 1974 Guide to the use of the piezoelectric filters: Part 1 Quartz crystal filters
    IS 7410 : Part 2 : 1974 Guide to the use of the piezoelectric filters: Part 2 piezoelectric ceramic filters
    IS 7411 : Part I : 1974 Specification for Ships’ Intermediate Shafts (Integral Flange) – Part I : For Port Crafts
    IS 7411 : Part II : 1974 Specification for Ships’ Intermediate Shafts (Integral Flange) – Part II : For Sea-going Vessels
    IS 7412 : 1974 Life testing of semiconductor devices
    IS 7415 : 1974 Code of safety for aniline
    IS 7416 : Part 1 : 1986 Dimensions for TV ferrite components: Part 1 Cores for deflection coil
    IS 7416 : Part 2 : 1991 Dimensions for TV ferrite components: Part 2 Ferrite rod for linearity control unit
    IS 7416 : Part 3 : 1976 Dimensions for TV ferrite components: Part 3 Tuning magnet for linearity control unit
    IS 7416 : Part 4 : 1991 Dimensions for TV ferrite components: Part 4 Ring magnet for linearity control unit
    IS 7416 : Part 5 : 1976 Dimensions for TV ferrite components: Part 5 Segment magnet for linearity control unit
    IS 7416 : Part 6 : 1987 Dimensions for TV ferrite components: Part 6 Beam centring magnet for deflection coil
    IS 7416 : Part 7 : 1976 Dimensions for TV ferrite components: Part 7 Pin cushion correction magnet for deflection coil
    IS 7416 : Part 10 : 1987 Dimensions for TV Ferrite Components – Part 10 : Corner Correction Magnet
    IS 7416 : Part 11 : 1976 Dimensions for TV ferrite components: Part 11 Balun core
    IS 7416 : Part 12 : 1984 Dimensions for TV ferrite components: Part 12 U core for line driver transformer
    IS 7418 : 1991 Criteria for design of spiral casing (concrete and steel)
    IS 7419 : 1983 Requirements for Stairs for physical Rehabilitation
    IS 7420 : 1974 Code of safety for phthalic anhydride
    IS 7421 : 1988 Porcelain bushings for alternating voltage up to and including 1000 V
    IS 7422 : Part 1 : 1974 Symbols and abbreviations for use in geological maps, sections and subsurface exploratory logs: Part 1 IS 7422 : Part 2 : 1974 Symbols and abbreviations for use in geological maps, sections and subsurface exploratory logs: Part 2 IS 7422 : Part 3 : 1974 Symbols and abbreviations for use in geological maps, sections and subsurface exploratory logs: Part 3 IS 7422 : Part 4 : 1985 Symbols and abbreviations for use in geological maps, sections and subsruface exploratory logs: Part 4 IS 7422 : Part 5 : 1992 Symbols and abbreviations for use in geological maps, sections and subsurface exploratory logs: Part 5 IS 7423 : 1974 Dimensions for apron conveyors
    IS 7424 : 1987 Photoelectric reflectance method for measurement of whiteness of plantation white sugar in solid state
    IS 7425 : 1974 Specification for Dental Casting Investment for Gold Alloys
    IS 7426 : 1989 Cotton Webbing, Special – Specification
    IS 7428 : 1974 Aluminium alloy extruded bars, rods and sections (for aircraft purposes) (Alloy 24345)
    IS 7429 : 1974 Procedure for inspecction and testing of aluminium and aluminium alloy extruded bars, rods and sections (for aircraft
    IS 7430 : 1974 Dimensions of screw cores made of ferrimagnetic oxides
    IS 7432 : 1974 Specification for Clamp, Myomectomy, Bonney’s Pattern
    IS 7433 : 1992 Obstetrics Instruments – Forceps, round ligament, Bonney’s pattern – Shape and dimensions
    IS 7434 : 1987 Specification for Retractor, Scapula, Tudor Edward’s Pattern
    IS 7435 : 1974 Specification for Rongeur, Ruskin’s Pattern
    IS 7436 : Part 1 : 1993 Guide for types of measurements for structures in river valley projects and critria for choice and location IS 7436 : Part 2 : 1997 Guide for types of measurements for structures in river valley projects and criteria for choice and location IS 7437 : 1974 Methods of sampling and test for vegetable adhesives
    IS 7438 : 1985 Method for test for acid-insoluble content in iron, copper, tin, and bronze powders
    IS 7439 : 1974 Dimensions for aeroslides
    IS 7440 : Part 2 : 1974 Essential ratings and characteristics of analogue integrated circuits: Part 2 Telecommunication amplifiers IS 7440 : Part 3 : Sec 1 : 1976 Essential ratings and characteristics of analogue integrated circuits: Part 3 Operational amplifier, IS 7440 : Part 3 : Sec 2 : 1977 Essential ratings and characteristics of analogue integrated circuits:Part 3 Operational amplifier, IS 7442 : 1974 Specification for Forceps, Bone Cutting, Straight and Angular, Liston’s Pattern
    IS 7443 : 2002 Methods for Load Rating of Worm Gears
    IS 7444 : 1974 Code of safety for methanol
    IS 7445 : 1974 Code of safety for acetone
    IS 7446 : 1987 Dimensions for chisel shanks and chuck bushings for pneumatic chippers
    IS 7447 : 1974 Method for evaluating strength of reactive dyes (dichlorotriazinyl type) by dyeing test
    IS 7448 : 1974 Method for evaluating strength of reactive dyes (monochlorotriazinyl type) by dyeing test
    IS 7449 : Part 1 : 1974 Glossary of terms for IC engines: Part 1 Fuel injection equipment
    IS 7451 : Part 1 : 1974 Reciprocating internal combustion engines: Part 1 General definitions
    IS 7451 : Part II : 1974 Reciprocating Internal Combustion Engines – Part II – Definitions of Locations of an Engine
    IS 7451 : Part III : 1974 Reciprocating Internal Combustion Engines – Part III : Definition of Right-Hand and Left-Hand Single Bank IS 7451 : Part IV : 1974 Reciprocating Internal Combustion Engines – Part IV : Designation of Direction of Rotation
    IS 7451 : Part V : 1974 Reciprocating Internal Combustion Engines – Part V : Designation of the Cylinders
    IS 7451 : Part VI : 1974 Reciprocating Internal Combustion Engines – Part VI : Hand Operated Control Devices – Standard Direction IS 7452 : 1990 Specificatiion for hot-rolled steel sections for doors, windows and ventilators
    IS 7454 : 1991 Rehabilitation equipment – Wheelchairs, folding, adult size – Specification
    IS 7455 : 1974 Specification for Sterilizer, Pressure, Hot and Cold Water
    IS 7456 : 1994 Rock drill shanks and chuck bushings – Dimensions
    IS 7457 : 1974 Specification for Brushes, Flue
    IS 7459 : 1974 Specification for Wasp Trap
    IS 7460 : 1988 Tolerances for tapered roller bearings
    IS 7461 : Part 1 : 1993 General plan of boundary dimensions for tapered roller bearings Part 1 Single row bearings
    IS 7461 : Part 2 : 1992 General plan of boundary dimensions for tapered roller bearings Part 2 Double row bearings
    IS 7461 : Part 3 : 1992 General plan of boundary dimensions for tapered roller bearings Part 3 Flanged cups
    IS 7463 : 1988 Wheat Flour (Maida) for Use by Biscuit Industry – Specification
    IS 7464 : 1988 Wheat Flour (Maida) for Use in Bread Industry – Specification
    IS 7465 : 1974 Specification for Portable and Mobile Troughed Belt Conveyors
    IS 7466 : 1994 Rubber gaskets for pressure cookers – Specification (First Revision)
    IS 7467 : 1974 Specification for Bands, Matrix, Dental, No. 1 and 2
    IS 7468 : 1974 Recommendation on preferred strokes for mechanical and hydraulic presses
    IS 7469 : 1974 Recommendation on preferred capacities for mechanical and hydraulic presses
    IS 7471 : 1974 Recommendation for polarity of earth connections and marking of electrical equipment for automobiles
    IS 7472 : 1986 Specification for Pig Feeds
    IS 7473 : 1974 Specification for Brushes, Tar
    IS 7474 : 1986 Specification for Pliers, Collar, Dental
    IS 7475 : 1992 Obstetrics Instruments – Clamp, vaginal, angled – Shape and dimensions
    IS 7476 : 1974 Specification for Nippers, Cutting, Dental
    IS 7477 : 1974 Brushes, harness, hard
    IS 7478 : 1985 Dimensions for cross recesses
    IS 7479 : 1985 Specification for Recess Penetration Gauges
    IS 7480 : 1974 Specification for Perforator, Simpson’s Pattern
    IS 7481 : 1974 Method for determination of protein efficiency ratio (PER)
    IS 7482 : 1989 Protein-based Beverages – Specification
    IS 7483 : 1985 Specification for Cross Recessed Pan Head Screws
    IS 7484 : 1974 Specification for Retractor, Vaginal, Purandare’s Pattern
    IS 7485 : 1985 Specification for Cross Recessed Countersunk Head Screws
    IS 7486 : 1985 Specification for Cross Recessed Raised Countersunk Head Screws
    IS 7487 : 1986 Specification for Protein-Enriched Biscuits
    IS 7490 : 1997 Reclaimed rubber – Specification
    IS 7491 : 1989 Sewing Machines, Household – Accuracy Requirements
    IS 7492 : 1989 Sewing machines, household – Sewing requirements
    IS 7493 : 1989 Sewing machines, household – Durability requirements
    IS 7494 : 1981 Steel for valves for internal combustion engines
    IS 7495 : 1974 Criteria for hydraulic design of silt selective head regulator for sediment control in offtaking canals
    IS 7496 : 1974 Specification for Direction of Travel-controls for Industrial Tractors and Powered Industrial Trucks
    IS 7497 : 1985 Specification for High Abrasion Furnace Carbon Black
    IS 7498 : 1985 Methods of sampling and test for carbon black (first revision)
    IS 7499 : 2001 /ISO 1658 : 1994 Natural Rubber (NR) – Evaluation Procedure
    IS 7500 : 2000 Code of Practice for Installation and Observation of Cross Arms for Measurement of Internal Vertical Movement IS 7501 : 1974 Specification for Speculum, Rectal, Kelly’s Pattern
    IS 7502 : 1974 Specification for Clamp, Intestine, Kocher’s Pattern
    IS 7503 : Part 1 : 1988 Glossary of terms used in rubber industry: Part 1 Definitions of Basic Terms
    IS 7503 : Part 2 : 1988 Glossary of terms used in rubber industry: Part 2 Definitions of Additives
    IS 7503 : Part 3 : 1988 Glossary of terms used in rubber industry: Part 3 Definitions relating to properties & testing
    IS 7503 : Part 4 : 1988 Glossary of Terms Used in Rubber Industry – Part 4 : Definitions Relating to Processing
    IS 7503 : Part 5 : 1988 Glossary of terms used in rubber industry: Part 5 Definitions relating to products – Hoses
    IS 7503 : Part 6 : 1986 Glossary of terms used in rubber industry: Part 6 Definitions relating to cellular materials
    IS 7504 : 1995 Gears – Cylindrical Gears – Accuracies – Methods of inspection
    IS 7505 : 1985 Cobalt powder for hardmetals
    IS 7506 : 1987 Specification for Nickel Powder
    IS 7507 : 1974 Specification for Forceps, Stone, Bladder
    IS 7509 : 1993 Thermal insulating cement
    IS 7511 : Part 1 : 1992 Dimensions for Neck Finishes – Part 1 : Shallow Continuous Thread Finish
    IS 7511 : Part 2 : 1986 Dimensions For Neck Finishes – Part 2 Shallow continuous thread finish for deep screw caps (R 3/D)
    IS 7511 : Part 3 : 1986 Dimensions for Neck Finishes – Part 3 : Roll-on Thread Non-Pilferproof (Ronpp)
    IS 7511 : Part 4 : 1986 Dimensions for Neck Finishes – Part 4 : Roll-on Threads Pilferproof
    IS 7511 : Part 5 : 1986 Dimensions for Neck Finishes – Part 5 : Vial Goldie Seal Glass Finishes
    IS 7511 : Part 6 : 1986 Dimensions for Neck Finishes – Part 6 : Dual Neck Finish
    IS 7511 : Part 7 : 1986 Dimensions for Neck Finishes – Part 7 : Crown Finish
    IS 7511 : Part 8 : 1986 Dimensions for Neck Finishes – Part 8 : Vacuum Lug Finish
    IS 7511 : Part 9 : 1992 Dimensions for Neck Finishes – Part 9 : 28 mm Finishes for Pressurised Liquids
    IS 7511 : Part 10 : 1991 Dimensions For Neck Finishes – Part 10 : Continuous Screw Thread for Use With Plastic Caps
    IS 7512 : 1974 Method for the determination of average particle size of metal powders by Fisher subsieve sizer
    IS 7513 : 1974 Graphical symbols for fluid power systems
    IS 7513 : Part 2 : 2002/ISO 1219-2 : 1995 Fluid Power Systems and Components — Graphic Symbols and Circuit Diagrams – Part IS 7514 : 1994 Grease, Low temperature – Specification
    IS 7516 : 1974 Specification for Trap Nests for Poultry
    IS 7517 : 1987 Specification for Pedigree Hatching Boxes for Poultry
    IS 7518 : 1974 Specification for Laying Battery Cages for Poultry
    IS 7519 : 1974 Specification for Hammer Drive Screws
    IS 7520 : 1974 Corrosion resistant high silicon iron castings
    IS 7521 : 1974 Specification for Dissector, Kocher’s Pattern
    IS 7522 : 1975 Specification for Retractor, Abdominal, Morris’ Pattern
    IS 7523 : 1974 Specification for Rubber Catheter (Urinary)
    IS 7524 : Part 1 : 1980 Methods of test for eye protectors: Part 1 Non-optical tests
    IS/ISO 7425-2 : 1989 Hydraulic Fluid Power – Housings for Elastomer-Energized, Plastic-Faced Seals – Dimensions and Tolerances IS 7524 : Part 2 : 1979 Methods of test for eye protectors: Part 2 Optical tests
    IS 7525 : 1974 Mounting dimensions for fork carriers and fork arms for forklift trucks
    IS 7526 : 1996 Detonating Fuses – Specification
    IS 7527 : 1992 Dimensions of loudspeaker magnets
    IS 7528 : 1974 Specification for Porcelain (Moulded) Fuse-Links for Automobiles
    IS 7529 : 1975 Method for estimation of Vitamin B-12 in foodstuffs
    IS 7530 : 1975 Method for estimation of pyridoxine (Vitamin B-6) in foodstuffs
    IS 7531 : 1990 Surgical Instruments – Corrosion Resistance of Stainless Steel Surgical Instruments – Methods of Tests
    IS 7532 : 1974 Specification for Soft Soap
    IS 7533 : 1975 Specification for Polyamide (Nylon) Monofilament Line for Fishing
    IS 7534 : 1985 Specification for sliding locking bolts for use with padlocks
    IS 7535 : 1975 Specification for Liver Extract, Microbiological Grade
    IS 7536 : 1975 Specification for Soluble Starch, Microbiological Grade
    IS 7537 : 1974 Road traffic signals
    IS 7538 : 1996 Three-phase squirrel cage induction motors for centrifugal pumps for agricultural applications
    IS 7539 : 1975 Specification for Carbaryl, Technical
    IS 7540 : 1974 Specification for mortice dead locks
    IS 7541 : 1974 Stabilized liquid sulphur trioxide
    IS 7543 : 1975 Specification for Planimeters
    IS 7544 : 1975 Specification for Parallel Ruler (roller type)
    IS 7545 : 1975 Specification for Optical Bench (Advanced Type)
    IS 7547 : 1987 Steel Nails used as internal chills in steel castings
    IS 7548 : 1992 Specification for vase for store tent
    IS 7549 : 1975 Specification for timber half wrought for sporting rifles
    IS 7550 : 1975 Specification for cane baskets for ration
    IS 7552 : 1974 Stability tests for trucks operating in special conditions
    IS 7553 : 1975 Control symbols for powered industrial trucks
    IS 7554 : 1974 Specification for Stiffeners
    IS 7556 : 1988 Specification for burnt clay jallies
    IS 7557 : 1982 Steel wire : uartto 20 mm for the manufacture of cold forged rivets
    IS 7558 : 1974 Code of practice for_domestic hot water installations
    IS 7559 : 1992 Salicylic Acid, Technical – Specification
    IS 7560 : 1974 Guidelines for allocation of cost among different purposoes of river valley projects
    IS 7561 : 1992 Surgical instruments – Forceps, Gallstone, Desjardin’s pattern – Shape and dimensions
    IS 7562 : 1974 Gold cladding
    IS 7563 : 1985 Code of practice for structural design of cut and cover concrete conduits
    IS 7564 : Part 1 : 1974 Recommendations for co-ordination of dimensions in buildings-Arrangements of building components and IS 7564 : Part 2 : 1974 Recommendations for co-ordination of dimensions in buildings-Arrangements of buidings components and IS 7564 : Part 3 : 1974 Recommendations for co-ordination of dimensions in buildings-Arrangements of building components and IS 7564 : Part 4 : 1975 Recommendations for co-ordination of dimensions in buildings-Arrangements of buiding components and IS 7564 : Part 5 : 1974 Recommendations for co-ordination of dimensions in buildings-Arrangements of building components and IS 7565 : Part I : 1975 Specification for Tines for Tractor-operated Cultivators – Part I : Rigid Tines
    IS 7565 : Part 2 1988 Specification for Tines for Tractor Operated Cultivators – Part 2 : S-type Tines
    IS 7566 : 1992 Surgical instruments – Forceps,spring clip compressing,Michel’s pattern – Shape and dimensions
    IS 7567 : 1993 Automatic circuit reclosers
    IS 7569 : 1987 Cast acrylic sheets for use in luminaires
    IS 7570 : 1975 Glossary of terms relating to fork arms and attachments of forklift trucks
    IS 7571 : 1974 Methods of tests for ceramic for telecommunication and allied purposes
    IS/ISO 7572 : 1984 Conditions of Acceptance and Installation for Work-holding Fixed Tables of Machine Tools
    IS 7572 : 1974 Guide for Testing Single-phase AC and Universal Motors
    IS 7576 : 1974 Bunched enamelled copper conductors with silk covering
    IS 7577 : 1986 Specification for Gas Testing Flame Safety Lamps
    IS 7578 : 1975 Specification for Wedge and Slot type Roof Bolt
    IS 7579 : 1992 Surgical instruments – Forceps,intestine holding, Denis Browne’s pattern – Shape and dimensions
    IS 7580 : 1975 Glossary of mining terms (transport)
    IS 7582 : 1975 Specification for Crab Meat, Solid Packed
    IS 7583 : 1991 Medical Electrical Equipment – High Frequency Surgical Equipment – Specification
    IS 7584 : 1975 Specification for Reference Food Colour Boxes
    IS 7585 : 1995 Wines – Methods of Analysis
    IS 7586 : 1975 Specification for Friction Props for Mines
    IS 7587 : Part 1 : 1975 Cage suspension gear for winding in mines Part 1 General requirements
    IS 7587 : Part II : 1975 Specification for Cage Suspension Gear for Winding in Mines – Part II : Cappels
    IS 7587 : Part III : 1980 Specification for Cage Suspension Gear for Winding in Mines – Part III : Shackles and Pins
    IS 7587 : Part 4 : 1975 Cage suspension gear for winding in mines Part 4 Bridle chains
    IS 7587 : Part V : 1976 Specification for Cage Suspension Gear for Winding in Mines – Part V : Equalizing Plates
    IS 7587 : Part 6 : 1984 Specification for Cage Suspension Gear for Winding in Mines – Part 6 : Safety Detaching Hooks (4 Plates IS 7587 : Part 7 : 2000 Cage Suspension Gear for Winding in Mines – Specification – Part 7 : Safety Detaching Hook (4 Plate Type) IS 7587 : Part 8 : 1993 Winding in mines – Suspension gear part 8 Clivey hook suspension arrangements
    IS 7588 : 1992 Barytes for Explosives and Pyrotechnic Compositions – Specification
    IS 7589 : 1974 Specification for China Clay for Explosive and Pyrotechnic Industry
    IS 7590 : 1975 Specification for Gelatin, Microbiological Grade
    IS 7591 : 1975 Specification for Malt Extract, Microbiological Grade
    IS 7592 : 1989 Peanut Chikki (Candy) – Specification
    IS 7593 : Part 1 : 1986 Specification for Power-Operated Pneumatic Sprayer-Cum-Duster – Part 1 : Knapsack Type
    IS 7594 : Part I : 1978 Specification for Magnetic Sound Tape Recording and Reproducing Equipment (Cassette Type) – Part I IS 7594 : Part 2 : 1979 Specification for Magnetic Sound Tape Recording and Reproducing Equipment (Cassette) – Part 2 : Domestic IS 7595 : Part 1 : 1975 General Requirements for Flat Rectangular Otter Boards
    IS 7595 : Part 2 : 1976 General requirements for otter boards, Part 2 Rectangular horizontally curved otter boards
    IS 7595 : Part 3 : 1977 General requirements for otter boards, Part 3 Oval otter boards
    IS 7595 : Part 4 : 1986 General Requirements for Otter Boards – Part 4 : Application Standard
    IS 7595 : Part 5 : 1991 Fishing vessels – Otter boards Part 5 Vee type otter boards
    IS 7595 : Part 6 : 1991 Fishing vessels – Otter boards Part 6 Guidelines for selection
    IS 7596 : 1974 Specification for Table, Operation, Orthopaedic, Albee’s Type
    IS 7597 : 2001 Surface Activity Agents – Glossary of Terms
    IS 7598 : 1990 Classification of steels
    IS 7599 : Part I : 1975 General requirements for engineer’s comparators with stands:Part I engineer’s comparators
    IS 7599 : Part II : 1975 General Requirements for Engineer’s Comparators With Stand – Part II : Comparator Standard
    IS 7600 : 1975 Analysis of variance
    IS 7601 : 1983 Specification for Fibreboard Drums for General Purposes
    IS 7602 : 1975 Specification for Lead Chromate for Explosive and Pyrotechnic Compositions
    IS 7603 : 1975 Specification for Portable Low Speed Food Grinding Machines
    IS 7604 : 1975 Specification for Length Bar Accessories
    IS 7605 : 1986 Specification for Portable Pneumatic Chippers
    IS 7606 : 1982 Specification for Plain Adjustable Snap Gauges
    IS 7607 : Part 1 : 1975 Code of practice for keeping dairy accounts: Part 1 Primary milk collection units
    IS 7607 : Part 2 : 1975 Code of practice for keeping dairy accounts: Part 2 Market milk plants
    IS 7607 : Part 3 : 1975 Code of practice for keeping dairy accounts: Part 3 Products plants
    IS 7608 : 1987 Phosphor bronze wire for general engineering purposes
    IS 7609 : 1988 General requirements for tents
    IS 7610 : Part I : 1975 Specification for Machinery Fabrics, Wool – Part I : General
    IS 7610 : Part II : 1975 Specification for Machinery Fabrics, Wool – Part II : Clearer Cloth
    IS 7610 : Part 3 : 1975 Specification for Machinery Fabrics, Wool – Part 3 : Sizing flannel
    IS 7610 : Part IV : 1982 Specification for Machinery Fabrics, Wool – Part IV : Plaiding Cloth
    IS 7610 : Part V : 1976 Specification for Machinery Fabrics, Wool – Part V : Lapping Cloth
    IS 7611 : 1993 Internal combsion engines – Radiators – Specification
    IS 7613 : 1975 Method of testing panel type air filters for air conditioning and ventilation purposes
    IS 7614 : 1975 Specification for Wooden Bobbins for Ring Doubling and Twisting Frames
    IS 7615 : 1993/ISO 1947 : 1973 System of cone tolerances for conical workpieces from C=1:3 to 1:500 and lengths from 6 to 630 IS 7616 : 1974 Guide for calculation of the effective parameters of magnetic piece parts
    IS 7617 : 1984 Code of practice for maintenance of forks for forklift trucks
    IS 7618 : 1974 Specification for Hexachloroethane
    IS 7619 : 1987 Specification for Pentaerythritol
    IS 7620 : Part 1 : 1986 Specification for Diagnostic Medical X-ray Equipment – Part 1 : General and Safety Requirements
    IS 7620 : Part 2 : 1986 Specification for Diagnostic Medical X-ray Equipment – Part 2 : Performance Requirements
    IS 7620 : Part 3 : 1991 Medical electrical equipment – Diagnostic X-ray equipment: Part 3 Radiation safety requirements
    IS 7621 : 2000 /ISO 6055 : 1997 High-lift Rider Trucks – Overhead Guards – Specification and Testing
    IS 7622 : 2001/ISO 3874 : 1997 Series 1 Freight Containers – Handling and Securing
    IS 7623 : 1993 Lithium Base Grease for Industrial Purposes – Specification
    IS 7624 : 1990 Lead-acid starter batteries for diesel locomotives and rail cars_
    IS 7625 : 1975 Specification for Gag, Mouth, Doyen’s Pattern
    IS 7627 : 1975 Specification for Gag, Mouth, Mason’s Pattern
    IS 7628 : 1975 Specification for Clamp, Stomach, Moynihan’s Pattern
    IS 7629 : 1975 Specification for Bender, Plate, Orthopedic
    IS 7630 : 1975 Specification for plywood drums
    IS 7631 : 1993 Pallets stackers and high lift platform trucks – Method of stability tests
    IS 7632 : 1975 Specification for Detonators
    IS 7633 : 1982 Specification for Calcium Carbonate for Explosive and Pyrotechnic Industry
    IS 7634 : Part 1 : 1975 Code of practice for plastic pipes work for potable water supplies: Part 1 Choice of materials and general IS 7634 : Part 2 : 1975 Code of practice for plastics pipe work for potable water supplies: Part 2 Laying and jointing polyethylene IS 7634 : Part 3 : 2003 Plastics Pipes Selection, Handling, Storage and Installation for Potable Water Supplies – Code of Practice IS 7635 : 1992 2-Nitroaniline-Specification
    IS 7636 : 1992 4-Chloro-2-Toluidine – Specification
    IS 7637 : 1992 5-Chloro-2-Toluidine – Specification
    IS 7638 : 1999 Wood/Lignocellulosic Based Panel Products – Methods of Sampling
    IS 7639 : 1975 Methods of sampling of asbestos cement products
    IS 7640 : 1975 Test code for disc harrows
    IS 7641 : 1975 Specification for 4-chloro-2-anisidine
    IS 7642 : 1975 Specification for 4-Aminophenol
    IS 7643 : 1975 Specification for 4-chloro-2-nitroaniline
    IS 7644 : 1975 Specification for 3-nitroaniline
    IS 7645 : 1994 Phenyl J-acid, Technical – Specification
    IS 7646 : 1994 Benzoyl J-acid, Technical – Specification
    IS 7647 : 1975 Specification for Acetoacet-2-toluidide
    IS 7648 : 1975 Silicone compound for application on high voltage porcelain insulators
    IS 7649 : 1975 Glossary of terms used in connection with aerial ropeways and cableways
    IS 7650 : 1975 Specification for Drill, Hand, Bone, Universal, Micro and Kirschner
    IS 7651 : 1997 Wire Reinforced Rubber Covered Hydraulic Hose – Specification
    IS 7652 : 1988 Specification for Sphygmomanometer, Aneroid Type
    IS 7653 : 1975 Manual blow pipes for welding and cutting
    IS 7654 : 1987 Specification for Rubber Hose for Chemicals
    IS 7655 : 1975 Code of practice for food advertising
    IS 7656 : 1975 Code of Practice for Curing and Preservation of Cattle Hides and Goat and Sheep Skins by Wet Salting Method
    IS 7657 : Part I : 1975 Specification for Starter Ring Gears for Internal Combustion Engines – Part I : Gears for Inertia and Solenoid IS 7657 : Part II : 1975 Specification for Starter Ring Gears for Internal Combustion Engines – Part II : Gears for Axial and Coaxial IS 7658 : 1975 Spectrographic analysis of aluminium
    IS 7659 : Part 1 : 1975 Reagents and standard solutions for use in chemical analysis of metals, ores and minerals Part 1 volumetric IS 7660 : 1988 Lead-acid batteries for electric locomotives and electrical multiple units
    IS 7661 : 1975 Specification for 4-aminoazobenzene
    IS 7662 : Part 1 : 1974 Recommendations for orientation of buildings: Part 1 Non-industrial buildings
    IS 7663 : 1975 Box spanners for rail screws
    IS 7664 : 1979 Specification for Guide Posts for Press Tool Sets
    IS 7665 : 1975 Specification for Clamp, Intestine, Crushing, Lever Action, Payr’s Pattern
    IS 7666 : 1988 Ultrasonic Examination of Ferritic Castings of Carbon and Low Alloy Steel – Recommended Procedure
    IS 7667 : 1975 Code of Practice for Handling and Storage of Aviation Fuels at Airfield Fuelling Stations
    IS 7669 : 1990 Shampoo, Soap Based – Specification
    IS 7670 : 2002 Aluminium Alloy Forging Stock and Forgings (for Parts Operated at Elevated Temperatures) for Aircraft Purposes IS 7671 : 1975 Specification for Fastener, File, Flexible-prong Type
    IS 7672 : 1975 Specification for Fastener, File, Loose-leaf, Ring Type
    IS 7673 : 1975 Glossary of terms for fire fighting equipment
    IS 7674 : 1975 Procedure for inspection and testing of aluminium and aluminium alloy forging stock and forgings for aircraft purposes
    IS 7675 : 1975 Method for sensory evaluation of beer
    IS 7676 : 1975 Specification for Chisel, Osseous, Dental
    IS 7677 : 1986 Specification for Exolevers, Apical, Dental
    IS 7678 : 1975 Method of photometric testing of incandescent type luminaires for general lighting service
    IS 7679 : 1978 Specification for Hair Creams
    IS 7683 : 1975 Code of practice for design, fabrication and maintenance of nail timber posts from small dimensional timber for IS 7684 : 1975 Limits of sizes for ISO metric trapezoidal nut threads (diameter range 8 to 100 mm)
    IS 7685 : 1975 Limits of sizes for ISO metric trapezoidal bolt threads diameter range 8 to 100 mm
    IS 7686 : 1975 Specification for 3 (N,N-diethyl) Aminophenol
    IS 7687 : 1980 Methods of measurement for cores for inductors and transformers for telecommunications
    IS 7688 : Part I : 1975 Code of Practice for Labelling of Prepackaged Foods – Part I : General Guidelines
    IS 7688 : Part 2 : 1976 Code of practice for labelling of pre-packaged foods: Part 2 Guidelines on claims
    IS 7688 : Part 3 : 1976 Code of practice for labelling of pre-packaged foods: Part 3 Nutritional labelling
    IS 7689 : 1989 Guide for the control of undesirable static electricity
    IS 7690 : 1975 Mathematical guide to the terms and definitions for reliability of electronic equipment and components (or parts) IS 7691 : 1975 Frequencies for special power applications
    IS 7692 : 1993 Specification for wooden headforms for testing of helmets
    IS 7693 : 1975 Oil immersed electrical apparatus for use in explosive gas atmospheres
    IS 7694 : 1992 /ISO 1161 : 1984 Series 1 Freight Containers – Corner Fittings – Specification
    IS 7696 : 1991 Para-cresyl Methyl Ether – Specification
    IS 7697 : 1991 Phenyl Ethyl Methyl Ether – Specification
    IS 7698 : 1983 Specification for returnable wooden crates for vegetables
    IS 7699 : 1975 Specification for Reflex Reflectors for Cycles
    IS 7700 : 1975 Quadrature phase-shifting voltage transformers
    IS 7701 : 1975 Specification for Plates, Bone, Spinal, Meurig Williams
    IS 7702 : 1975 Method for determination of thickness of woven and knitted fabrics
    IS 7703 : Part 1 : 1990 Methods of Test for Man-Made Fibres Continuous Filament Flat Yarn – Part 1 : Linear Density
    IS 7703 : Part 2 : 1990 Methods of Test for Man-Made Fibres Continuous Filament Flat Yarn – Part 2 : Dry and Wet Tenacity and IS 7703 : Part 3 : 1991 Methods of Test for Man-Made Fibre Continuous Filament Flat Yarn – Part 3 : Commercial Mass
    IS 7703 : Part IV : 1981 Methods for Test for Continuous Filament Polyester and Polyamide Flat Yarn – Part IV Sampling
    IS 7703 : Part 5 : 1987 Methods of Test for Continuous Filament Polyester and Polyamide Flat Yarn – Part 5 : Unevenness Percentage
    IS 7704 : 1993 4-Aminotoluene-3-Sulphonic Acid – Specification
    IS 7705 : 1975 Code of practice for packaging of precision and special purpose steel tubes
    IS 7706 : 1975 Specification for Bolster Plates for Gap Frame Presses without Die Cushion
    IS 7707 : 1975 Specification for Bolster Plates for Gap Frame Presses with Die Cushion
    IS 7708 : 1975 Vacuum flasks
    IS 7709 : 1975 Specification for Standard Hydrophone
    IS 7710 : 1975 Specification for Snare, Tonsil, Eve’s Pattern
    IS 7711 : 1975 Specification for Curette, Adenoid, Beckmann’s Pattern
    IS 7712 : 1975 Specification for Curette, Adenoid, St. Clair Thomson’s Pattern
    IS 7713 : 1975 Specification for Retractor, Light Model, Weislander’s Pattern
    IS 7714 : 1975 Method of seability test for gasket material
    IS 7715 : 1975 Methods for testing suitability of bins for safe storage of foodgrains
    IS 7716 : 1975 Methods for testing efficacy of fumigation for disinfestation of grains in domestic bins
    IS 7718 : 1991 Recommendations for inspection, testing and maintenance of fixed wheel and slide gates
    IS 7719 : 1975 Metallic spiral wound gaskets
    IS 7720 : 1991 Criteria for Investigation, Planning and Layout for Barrages and Weirs
    IS 7721 : 1986 Specification for Chrome Tanned Leather Laces for Heavy Duty Footwear
    IS 7722 : 1975 Analogue pneumatic signals for process control systems
    IS 7723 : 1975 Specification for Ships’ Flag Staff
    IS 7724 : 1975 Specification for Sand-Filled Protection of Electrical Equipment for Use in Explosive Atmospheres
    IS 7725 : 1975 Specification for Hook, IUCD, Shirodkar’s Pattern
    IS 7726 : 1975 Limits of sizes for ISO metric trapezoidal nut threads (diameter range 105 to 300 mm)
    IS 7727 : 1975 Limits of sizes for ISO metric trapezoidal bolt threads (diameter range 105 t0 300 mm)
    IS 7728 : 1984 Analogue dc current signals for process control systems
    IS 7729 : 1975 Specification for Sodium Monochloroacetate
    IS 7730 : 1975 Guide for storage of pears
    IS 7731 : 1975 Guide for storage of peaches
    IS 7732 : 1975 Specification for Apple Juice
    IS 7734 : 1975 Specification for Forceps, Eye, Peripheral Iridectomy, Traquair’s Pattern
    IS 7735 : 1992 Forceps, spong holding – Shape and dimensions
    IS 7736 : 1975 Specification for Screw, Myoma
    IS 7737 : 1975 Specification for Forceps, Punch, Cervical Biopsy
    IS 7738 : 1975 Specification for Safety Fuse for Commercial Use
    IS 7739 : Part I : 1975 Code of Practice for Preparation of Metallographic Specimens – Part I : General Features
    IS 7739 : Part 2 : 1975 Code of Practice for Preparation of Metallographic Specimens – Part 2 Electrolytic polishing
    IS 7739 : Part 3 : 1975 Code of Practice for Preparation of Metallographic Specimens – Part 3 Aluminium and its alloys and their IS 7739 : Part 4 : 1975 Code of Practice for Preparation of Metallographic Specimens – Part 4 Copper and its alloys and their examination
    IS 7739 : Part 5 : 1976 Code of Practice for Preparation of Metallographic Specimens – Part 5 Iron and steel and their examination
    IS 7739 : Part 6 : 1975 Code of Practice for Preparation of Metallographic Specimens – Part 6 Lead and its alloys and their examination
    IS 7739 : Part 7 : 1975 Code of Practice for Preparation of Metallographic Specimens – Part 7 Magnesium and its alloys and their IS 7739 : Part 8 : 1975 Code of Practice for Preparation of Metallographic Specimens – Part 8 Nickel and its alloys and their examination
    IS 7739 : Part 9 : 1975 Code of Practice for Preparation of Metallographic Specimens – Part 9 Gold, silver, platinum, palladium IS 7739 : Part 10 : 1975 Code of Practice for Preparation of Metallographic Specimens – Part 10 Tin and its alloys and their examination
    IS 7739 : Part 11 : 1976 Code of Practice for Preparation of Metallographic Specimens – Part 11 Zinc and its alloys and their examination
    IS 7740 : 1985 Code of practice for construction and maintenance of road gullies
    IS 7741 : Part II : 1975 Specification for Loudspeakers – Part II : Direct Radiator Moving Coil Loudspeakers
    IS 7741 : Part 3 : 1975 Specification for loudspeakers: Part 3 Pressure unit operated horn loudspeakers (superseding IS 1032:IS 7742 : 1975 Specification for Synthetic Emulsion Resin Binders
    IS 7743 : 1975 Recommended practice for magnetic particle testing and inspection of steel forgings
    IS 7744 : 1975 Dimensions for drip-feed lubricators
    IS 7745 : 1975 Dimensions for lubrication holes, grooves and bore relief
    IS 7746 : 1991 Code of practice for in-situ shear test on rock
    IS 7747 : 1993 Textiles – Hand-knitting wool yarn, worsted – Specification
    IS 7748 : Part I : 1975 Specification for Variable Capacitors – Part I : Tests and General Requirements
    IS 7749 : 1975 Specification for Walnuts
    IS 7750 : 1975 Specification for Cashew Kernels
    IS 7751 : Part I : 1975 Specification for Slide Switches – Part I : General Requirements and Tests
    IS 7751 : Part 2 : 1985 Specification for Slide Switches – Part 2 : Slide Switches, Type 1
    IS 7752 : Part 1 : 1975 Guide for improvement of power factor in consumer installation:Part 1 Low and medium supply voltages
    IS 7754 : 1975 Method for designation of microstructure of graphite in cast iron
    IS 7755 : 1975 High tension insulating cotton tape impregnated with bitumen based compound
    IS 7756 : 1975 Specification for Depressor, Tongue, Lack’s Pattern
    IS 7757 : 1975 Specification for Cystitome, Eye, Moorfield’s Pattern
    IS 7758 : 1975 Specification for Curette, Eye, Evacuation, Moorfield’s Pattern
    IS 7760 : 1985 Specification for steel glass-front cabinets
    IS 7761 : 1983 Specification for steel book cases
    IS 7762 : 1975 Specification for Hook, Eyelid
    IS 7763 : 1975 Specification for Extractor, Juice, Domestic
    IS 7766 : 1975 Specification for Twist Drills for Jig Boring Machines
    IS 7767 : 1975 Specification for Spatula, Eye, Cyclodialysis, Sinclair’s Pattern
    IS 7768 : 1975 Method for sensory evaluation of milk
    IS 7769 : 1975 Method for sensory evaluation of table butter
    IS 7770 : 1975 Method for Sensory Evaluation of Ghee (Clarified Butterfat)
    IS 7771 : 1975 Specification for Letterpress Half Tone Ink, Black
    IS 7772 : 1975 Specification for Shell Core Drills
    IS 7773 : 1975 Holding dimensions for broaching tools
    IS 7774 : Part 1 : 1975 Glossary of terms relating to transport tractors and trailers: Part 1 Basic terms
    IS 7774 : Part 2 : 1975 Glossary of terms relating to transport tractors and trailers: Part 2 Dimensions and weights
    IS 7775 : 1975 Ceramic grinding media and lining
    IS 7776 : 1975 Specification for Silk Webbing
    IS 7777 : 1987 Specification for Cotton Webbing Rolled Edges
    IS 7778 : 1975 Methods for Sampling Small Tools
    IS 7778 : Part 1 : 2003 Small Tools Sampling Inspection Procedures – Part 1 : Twist Drills, Countersink and Counterbores
    IS 7778 : Part 2 : 2003 Small Tools Sampling Inspection Procedures – Part 2 : Reamers
    IS 7778 : Part 3 : 2003 Small Tools Sampling Inspection Procedures – Part 3 : Sleeves, Sockets and Adaptors
    IS 7778 : Part 4 : 2003 Small Tools Sampling Inspection Procedures – Part 4 : Screwing Taps, Dies and Knurling Tools
    IS 7778 : Part 5 : 2003 Small Tools Sampling Inspection Procedures – Part 5 : Milling Cutters
    IS 7778 : Part 6 : 2003 Small Tools Sampling Inspection Procedures – Part 6 : Milling Arbors and Accessories
    IS 7778 : Part 7 : 2003 Small Tools Sampling Inspection Procedures – Part 7 : Gear Cutting Tools and Broaches
    IS 7778 : Part 8 : 2003 Small Tools Sampling Inspection Procedures – Part 8 : Saws
    IS 7778 : Part 9 : 2003 Small Tools Sampling Inspection Procedures – Part 9 : Single Point (HSS and Carbide Tipped) Tools
    IS 7778 : Part 10 : 2003 Small Tools Sampling Inspection Procedures – Part 10 : Carbide Tips and Indexable Inserts
    IS 7778 : Part 11 : 2003 Small Tools Sampling Inspection Procedures – Part 11 : Hard Metal Burrs
    IS 7779 : Part 1 : Sec 1 : 1975 Schedule for properties and availability of stones for construction purposes: Part I Gujarat state IS 7779 : Part 1 : Sec 2 : 1975 Schedule for properties and availability of stones for construction purposes: Part I Gujarat state: IS 7779 : Part 1 : Sec 3 : 1975 Schedule for properties and availability of stones for construction purposes: Part I Gujarat state: IS 7779 : Part 2 : Sec 1 : 1979 Schedule for properties and availability of stones for construction purposes: Part II Maharashtra IS 7779 : Part 2 : Sec 2 : 1979 Schedule for properties and availability of stones for construction purposes: Part II Maharashtra IS 7779 : Part II : Sec 3 : 1979 Schedule for Properties and Availability of Stones for Construction Purposes – Part II : Maharashtra IS 7779 : Part III : Sec 2 : 1980 Schedule for Properties and Availability of Stones for Construction Purposes – Part III : Tamil Nadu IS 7779 : Part III : Sec 3 : 1980 Schedule for Properties and Availability of Stones for Construction Purposes – Part III : Tamil Nadu IS 7779 : Part 4 : Sec 1 to 3 : 1996 Schedule of properties and availability of stones for construction purposes Part IV Karnataka IS 7779 : Part 5 : Sec 1 to 3 : 1997 Schedule for Properties and Availability of Stones for Construction Purposes – Part 5 : Andhra IS 7780 : 1975 Specification for Pliers, Ligature Forming, Dental
    IS 7781 : 1975 Specification for Pliers, Angle Ribbon Arch with Groove, Dental
    IS 7782 : 1975 Brushes, test tube
    IS 7783 : 1981 General requirements for handles, instruments,eye-surgery
    IS 7784 : Part 1 : 1993 Code of practice for design of cross drainage works: Part 1 General features
    IS 7784 : Part 2 : Sec 1 : 1995 Code of practice for design of cross drainage works: Part 2 Specific requirements Section I Aqueducts
    IS 7784 : Part 2 : Sec 2 : 2000 Code of Practice for Design of Cross Drainage Works – Part 2 : Specific Requirements – Section IS 7784 : Part 2 : Sec 3 : 1996 Code of practice for design of cross drainage works: Part 2 Specific requirements Section 3 Canal IS 7784 : Part 2 : Sec 4 : 1999 Design of Cross Drainage Works – Code of Practice – Part 2 : Specific Requirements – Section 4 IS 7784 : Part 2 : Sec 5 : 2000 Code of Practice for Design of Cross Drainage Works – Part 2 : Specific Requirements – Section IS 7785 : Part 1 : 1975 Elevated type aerodrome lighting fittings: Part 1 General requirements
    IS 7785 : Part 2 : 1976 Elevated type aerodrome lighting fittings: Part 2 Fixed focus high intensity bi-directional runway edge lighting IS 7785 : Part 3 : 1976 Elevated type aerodrome lighting fittings: Part 3 Low intensity runway edge lighting fittings
    IS 7785 : Part 4 : Sec 1 : 1981 Elevated type aerodrome lighting fittings: Part 4 Angle of approach lights, Section 1 Visual approach IS 7785 : Part 5 : Sec 1 : 1981 Elevated type aerodrome lighting fittings: Part 5 Approach lighting fittings, Section 1 High intensity IS 7785 : Part 6 : Sec 1 : 1981 Elevated type aerodrome lighting fittings: Part 6 Taxiway lights, Section 1 Low intensity omni-directional IS 7786 : 1975 Specification for Retractor, Eyelid, Desmarre’s Pattern
    IS 7787 : 1975 Grading for NEEM kernel and depulped NEEM seeds for oil milling
    IS 7788 : 1975 Single-phase traction power converters
    IS 7790 : 1991 Domed cap nuts – Specification
    IS 7791 : 1975 Projector alignment test film for 35 mm motion-picture sound reproducers
    IS 7792 : 1975 Code of practice for handling plastics containers
    IS 7793 : 1975 Aluminium alloys for IC engine pistons
    IS 7794 : 1984 Specification for Manual Portable Grease Guns
    IS 7795 : 1975 Specification for Hexagon Nuts with Collar
    IS 7797 : 1975 Grading for soyabeans for oil milling
    IS 7798 : 1975 Grading for sunflower seeds for oil milling
    IS 7799 : 1975 Code for preservation of vitamins in foodstuffs
    IS 7800 : 1990 Thread cutting tapping screw – Screw threads and ends – Dimensions
    IS 7801 : 1975 Specification for Trypsin, Microbiological Grade
    IS 7802 : 1975 Code of hygienic conditions for sweetmeat shop
    IS 7803 : Part I : 1975 Specification for Plastic Containers for Pharmaceutical Use – Part I : Other than Parenteral and Ophthalmic IS 7803 : Part II : 1975 Specification for Plastic Containers for Pharmaceutical Use – Part II : Parenteral and Ophthalmic Preparations
    IS 7804 : 1983 Guide for palletization of tea chests
    IS 7806 : 1993 Martensitic and austenitic high alloy steel castings for high temperature service
    IS 7807 : 1975 Methods of Test for Asafoetida
    IS 7808 : 1975 Code of Procedure for Conducting Studies on Underground Corrosion of Metals
    IS 7809 : Part 1 : 1975 Pressure sensitive adhesive tapes for electrical purposes: Part 1 General requirements
    IS 7809 : Part 2 : 1977 Pressure sensitive adhesive tapes for electrical purposes: Part 2 Methods of test
    IS 7809 : Part 3 : Sec 1 : 1986 Specification for Pressure Sensitive Adhesive Insulating Tapes for Electrical Purposes – Part 3 : IS 7809 : Part 3 : Sec 2 : 1981 Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, IS 7809 : Part 3 : Sec 3 : 1981 Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, IS 7809 : Part 3 : Sec 4 : 1977 Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, IS 7809 : Part 3 : Sec 5 : 1977 Pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials, IS 7810 : 1999 Code of practice for radiographic examination of resistance spot welds on aluminium and its alloys
    IS 7811 : 1985 Phosphor bronze rods and bars
    IS 7812 : 1975 Code of safety for mercury
    IS 7813 : 1975 Specification for Box, Aluminium, Rectangular
    IS 7814 : 1985 Phosphor bronze sheet and strip
    IS 7815 : 1975 Method for estimation of amino acids in foodstuffs
    IS 7816 : 1975 Guide for testing insulation resistance of rotating machines
    IS 7817 : 1975 Specification for Impactor for Hip Prosthesis
    IS 7818 : 1975 Specification for Broach, Moore Type, for Hip Prosthesis
    IS 7819 : 1975 Specification for Mallet, Nylon Headed, Orthopedic
    IS 7820 : 1975 Method of test for ignition temperatures
    IS 7822 : 1983 Specification for Twist Drills Morse Taper Shank, Extra Long Series
    IS 7823 : 1983 Specification for Twist Drills, Parallel Shank, Extra Long Series
    IS 7824 : 1995 Quick change drill chucks, collets and floating reamer holders specification
    IS 7825 : Part I : 1975 Specification for Cylinder Type Hand Lawn Mower – Part I : Wheel Type
    IS 7825 : Part II : 1975 Specification for Cylinder Type Hand Lawn Mower – Part II : Roller Type
    IS 7826 : 1984 Specification for Ginger Oleoresin
    IS 7827 : Part I : 1975 Specification for Electrical Wind Screen Wipers – Part I : Wiper System
    IS 7827 : Part II : 1975 Specification for Electrical Wind Screen Wipers – Part II : Wiper Motors
    IS 7827 : Part 3 : Sec 1 : 1993 Automotive Vehicles – Electrical Wind Screen Wipers – Part 3 : Wiper Arms and Blades – Section IS 7827 : Part 3 : Sec 2 : 1985 Specification for Electrical Wind Screen Wiper – Part 3 : Wiper Arms and Blades – Section 2 : Wiper IS 7828 : 1975 Sizes of gravity filling orifices for aircraft
    IS 7829 : 1975 Marking of aircraft gas cylinders
    IS 7830 : 1975 Dimensions of aircraft sheet rails and pins
    IS 7831 : 1975 Dimensions of Aircraft Lubricating Nipples
    IS 7832 : 1975 Dimensions for aircraft connections for ground airconditioning
    IS 7833 : 1975 Specification for Knives, Gingivectomy, Dental
    IS 7834 : Part 1 : 1987 Specification for injection moulded PVC fittings with solvent cement joints for water supplies: Part 1 General IS 7834 : Part 2 : 1987 Specification for injection moulded PVC fittings with solvent cement joints for water supplies: Part 2 Specific IS 7834 : Part 3 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints for water supplies: Part IS 7834 : Part 4 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints for water supplies: Part IS 7834 : Part 5 : 1987 Specification for Injection Moulded PVC Socket Fittings With Solvent Cement Joints for Water Supplies IS 7834 : Part 6 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints for water supplies: Part IS 7834 : Part 7 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints for water supplies: Part IS 7834 : Part 8 : 1987 Specification for injection moulded PVC socket fittings with solvent cement joints for water supplies: Part IS 7835 : 1975 Specification for Edible Medium-fat Soya Flour
    IS 7836 : 1975 Specification for Edible Low-fat Soya Flour
    IS 7837 : 1975 Specification for Edible Full-fat Soya Flour
    IS 7839 : 1975 Specification for Dried Ice-cream Mix
    IS 7840 : 1983/ISO 6414 : 1982 Technical drawings for glassware
    IS 7841 : 1975 Specification for Compression Plate, Muller Type
    IS 7842 : 1975 Method for evaluating strength of reactive dyes (vinyl sulphone type) by dyeing test
    IS 7843 : 1975 Method for evaluating strength and shade of acid dyes by dyeing test
    IS 7844 : 1975 Method for evaluating strength and shade of chrome dyes by dyeing test
    IS 7845 : 1975 Method for evaluating strength of reactive dyes (trichloropyrimidyl type) by dyeing test
    IS 7846 : 1975 Specification for Extractor for Hip Prosthesis
    IS 7847 : 1975 General characteristics of lifting hooks
    IS/ISO 7848 : 1986 Shank Type Milling Cutters for Indexable Inserts – Designation
    IS 7848 : 1975 Studio spot lights for use in motion piture studios
    IS 7850 : 1975 Specification for wooden box for microscope slides
    IS 7851 : 1975 Specification for Wash and Wear Requirements of Cotton Fabrics
    IS 7852 : 1975 Eye ointment tubes, small
    IS 7853 : 1975 Specification for Surveyor, Cast, Dental
    IS 7854 : 1975 Voltages and frequency for aircraft electrical systems
    IS 7855 : 1975 Form of declaration of performance of aircraft electrical equipment
    IS 7856 : 1975 Safety features for ground power units for direct current aircraft servicing and engine starting
    IS 7857 : 1975 Specification for Aircraft-Fuel Nozzle Grounding Plugs and Sockets
    IS 7858 : 1991 Surgical microscope – Specification
    IS 7859 : 1975 Gauge Allowances and Manufacturing Tolerances for Plain Gauges for Inside Measurements for ISO Fit Sizes (IS 7860 : 1975 Specification for Mask, Schimmelbusch’s Pattern with Chadborn’s Modification
    IS 7861 : Part 1 : 1975 Code of practice for extreme weather concreting Part 1 Recommended practice for hot weather concreting
    IS 7861 : Part 2 : 1981 Code of pracdtice for extreme weather concreting: Part II Recommended practice for cold weather concreting
    IS 7862 : 1975 Glossary of terms relating to safety aspects concerning operating areas of industrial trucks
    IS 7863 : 1975 Specification for Fertilizer Physical Mixtures
    IS 7864 : Part I : 1975 Specification for Upholstery Springs – Part I : Conical Type
    IS 7864 : Part II : 1979 Specification for – Upholstery Springs – Part II : Zigzag Type
    IS 7865 : 1975 General requirements of 8 tonnes hooks for lifting ISO series 1 freight containers of upto 30 tonnes capacity
    IS 7866 : 1993 Textiles – Ring spun polyester blended grey yarn – Specification
    IS 7867 : 1975 Specification for Continuous Filament Textile Polyamide (Nylon) Yarn
    IS 7868 : 1975 Specification for Rotary Drill Rods for Drilling Principally in Coal
    IS 7869 : 1975 Specification for Spray, De Vilbiss’ Pattern
    IS 7870 : 1992 Surgical instruments – Needle,holder,Mayo-Hegar’s and Crile-Wood’s Patterns – Shape and dimensions
    IS 7871 : 1975 Criteria for hydraulic design of groyne walls (curved wing) for sediment distribution at offtake points in a canal
    IS 7872 : 1975 Specification for Freezers
    IS 7873 : 1975 Code of practice for lime concrete lining for canals
    IS 7874 : Part I : 1975 Methods of Tests for Animal Feeds and Feeding Stuffs – Part 1 : General Methods
    IS 7874 : Part II : 1975 Methods of Tests for Animal Feeds and Feeding Stuffs – Part II : Minerals and Trace Elements
    IS 7874 : Part III : 1975 Methods of Tests for Animal Feeds and Feeding Stuffs – Part III : Microbiological Methods
    IS 7876 : 1975 Gauge allowances and manufacturing tolerances for plain gauges for outside measurements for ISO fit sizes (nominal IS 7877 : Parts I to V : 1976 Methods of Sampling and Tests for Hand-made Carpets
    IS 7879 : Part 1 : 1975 Glossary of aeronautical and astronautical terms Part 1 General
    IS 7879 : Part 2 : 1975 Glossary of aeronautical and astronautical terms Part 2 Motion of aircraft
    IS 7879 : Part III : 1975 Glossary of Aeronautical and Astronautical Terms Part III : Structure
    IS 7879 : Part 4 : 1980 Glossary of aeronautical and astronautical terms Part 4 Aerodynamics
    IS 7879 : Part V : 1982 Glossary of Aeronautical and Astronautical Terms – Part V : Aerodynes (Heavier-than-air Aircraft)
    IS 7879 : Part VI : 1978 Glossary of Aeronautical and Astronautical Terms – Part VI : Space Terms
    IS 7879 : Part 7 : 1984 Glossary of aeronautical and astronautical terms Part 7 Air traffic and ground control services
    IS 7879 : Part 8 : 1987 Glossary of aeronautical and astronautical terms, Part 8 Power plant
    IS 7880 : 1975 Criteria for hydraulic design of skimming platform for sediment control in offtaking canal
    IS 7881 : Part 1 : 1975 Glossary of terms relating to builder’s hardware: Part 1 Locks
    IS 7881 : Part 2 : 1976 Glossary of terms relating to builder’s hardware: Part 2 Latches
    IS 7882 : 1975 Aluminium alloy sheet and strip for aircraft purposes (Alloy 19000)
    IS 7883 : 1975 Aluminium-manganese sheet and strip for aircraft purposes (Alloy 31000)
    IS 7884 : 1992 Shampoo, Synthetic Detergent Based – Specification
    IS 7885 : 1985 Specification for Spray, Macintosh’s Pattern
    IS 7886 : 1997 Barium Chromate for Explosives and Pyrotechnic Industry – Specification
    IS 7887 : 1992 Mild steel wire rods for general engineering purposes
    IS 7888 : 1976 Methods of Test for Flexible Polyurethane Foam
    IS 7889 : 1975 Vibration galvanometers
    IS 7890 : 1975 Ballistic galvanometers
    IS 7891 : 1975 Specification for Inedible Offals Trolley
    IS 7892 : 1975 Specification for Retractor, Double and Single, Blunt Hooks
    IS 7893 : 1992 Surgical instruments – Forceps, towel, Backhaus’s pattern – Shape. size and dimensions
    IS 7894 : 1975 Code of practice for stability analysis of earth dams
    IS 7895 : 1975 Tests for fire resistant characteristics of hydraulic fluids used in mining machinery
    IS 7896 : 2001 Data for Outside Design Conditions for Air Conditioning for Indian Cities
    IS 7897 : 1975 Test code for chaff cutter
    IS 7898 : 2001 Manually-Operated Chaff Cutter – Specification
    IS 7899 : 1992 Alloy steel castings suitable for pressure services
    IS 7900 : 2001/ISO 8601 : 2000 Data Elements and Interchange Formats – Information Interchange – Representation of Dates and IS 7901 : 1975 Specification for Triethanolamine, Technical
    IS 7902 : 2001 Aluminium Alloy Forging Stock and Forgings (Alloy 24345) for Aerospace Applications – Specification
    IS 7903 : 1995 Textiles-Tarpaulins made from high density polyethylene woven fabric-Specification
    IS 7904 : 1995 High carbon steel wire rods
    IS 7905 : 1996 Calcium Alginate, Food Grade – Specification
    IS 7906 : Part 1 : 1997 Helical Compression Springs – Part 1 : Design and Calculations for Springs Made from Circular Section IS 7906 : Part II : 1975 Helical Compression Springs – Part II : Specification for Cold Coiled Springs Made from Circular Section IS 7906 : Part 3 : 1975 Helical compression springs:Part 3 Data sheet for springs made from circular section wire and bar
    IS 7906 : Part 4 : 1987 Helical compression springs:Part 4 Selection of standard cold coiled springs made from circular section IS 7906 : Part 5 : 1989 Helical compression springs:Part 5 Hot coiled springs made from circular section bars – Specification
    IS 7906 : Part VI : 1978 Helical Compression Springs – Part VI : Design and Calculations for Springs Made from Rectangular Section IS 7906 : Part 7 : 1989 Helical compression springs:Part 7 Quality requirements for cylindrical coil compression springs used mainly IS 7906 : Part 8 : 1989 Helical compression springs:Part 8 Method of inspection of hot coiled compression springs made from circular IS 7907 : Part 1 : 1976 Helical extension springs:Part 1 Design and calculation for springs made from circular section wire and IS 7907 : Part II : 1976 Helical Extension Springs – Part II : Specification for Cold Coiled Springs Made from Circular Section Wire IS 7907 : Part III : 1975 Helical Extension Springs – Part III : Data Sheet for Specification for Springs Made from Circular Section IS 7907 : Part 4 : 1987 Specification for Helical Extension Springs – Part 4 : Selection of Standard Cold Coiled Springs Made from IS 7908 : 1997 Sulphur Dioxide, Food Grade – Specification
    IS 7909 : 1993 Slaughter House Equipment – Electrical Stunning Tongs for Pigs – Specification
    IS 7910 : 2003 Monoethanolamine – Specification
    IS 7911 : 2000 Diethanolamine – Specification
    IS 7912 : 1975 Specification for Scoop, Stanley Boyd’s Pattern
    IS 7913 : 1975 Specification for Integral Stems for Percussive Drilling
    IS 7914 : 1975 Standard cells
    IS 7915 : 1976 Dimensions for connections for aircraft ground electrical supplies
    IS 7916 : 1992 Code of practice for open power channels
    IS 7917 : 1994 /ISO 8323 : 1985 Freight Containers – Air/Surface (Intermodal) General Purpose Containers – Specification and IS 7918 : 2001 Diethylene Glycol – Specification
    IS 7919 : 1975 Specification for Refractometer – Abbe Type
    IS 7920 : Part 1 : 1994 Statistical Vocabulary and Symbols : Part 1 Probability and General Statistical Terms
    IS 7920 : Part 2 : 1994 Stastical vocabulary and Symbols : Part 2 Statistical Quality Control
    IS 7920 : Part 3 : 1996 Statistical vocabulary and symbols : Part 3 Design of experiments
    IS 7921 : 1987 Recommendations for modular co-ordination in building industry : Horizontal co-ordination
    IS 7922 : 1987 Recommendations for modular co-ordination in building industry: Vertical co-ordination
    IS 7923 : 1985 Glossary of terms and definitions relating to drives using V-belts and grooved pulleys
    IS 7924 : 1976 Specification for Thigh Blocks, Wooden
    IS 7925 : 1976 Low alloy types of abrasion resistant iron castings
    IS 7927 : 1975 Method of field testing for manually operated paddy weeder
    IS 7928 : 1993 Alginic Acid, Food Grade – Specification
    IS 7929 : 1975 Methods of determination of electrical resistivity of chemical coke
    IS 7930 : 1976 Dimensions of toroids made of magnetic oxides or iron powder
    IS 7931 : Part 1 : 1975 Automatic and semi-automatic welding equipment with self-adjusting arcs (MIG/MAGprocesses): Part 1 IS 7931 : Part 2 : 1975 Automatic and semi-automatic welding equipment with self-adjusting arcs (MIG/MAG Processes): Part 2 IS 7931 : Part 3 : 1975 Automatic and semi-automatic welding equipment with self-adjusting arcs (MIG/MAG Processes): Part 3 IS 7932 : 1982 Specification for Boiler Water Treatment Compounds
    IS 7933 : 1975 Specification for Flexible Polyurethane Foam for Domestic Mattresses
    IS 7934 : 1981 Dimensions of square cores made of magnetic oxides and associated parts
    IS 7935 : 1975 Insulator fittings for overhead power lines with a nominal voltage up to and including 1000 V
    IS 7937 : 1997 Shipbuilding – Testing of Windlasses – General Requirements
    IS 7938 : 1976 Specification for Air Receivers for Compressed Air Installation
    IS 7939 : 1976 Flare nut wrench, double ended, flat
    IS 7940 : 1976 Method for determining resistance to penetration by water of fabrics by static pressure head test
    IS 7941 : 1976 Method for determining the water repellency of fabrics by cone test
    IS 7942 : 1976 Code of practice for daylighting of educational buildings
    IS 7943 : 1976 Specification for Trichlorfon Dusting Powders
    IS 7945 : 1976 Specification for Trichlorfon, Technical
    IS 7948 : 1987 Specification for Fenthion EC
    IS 7950 : 1989 Pesticides – Fenthion, Technical – Specification
    IS 7951 : 1997 Textile machinery and accessories – Beams for dyeing slivers and yarn – Terminology and main dimensions
    IS 7953 : 1976 Specification for Horn Rings for Automobiles
    IS 7954 : 1976 Specification for Suitcases
    IS 7955 : 1976 Specification for Holdalls
    IS 7956 : 1975 Recommendations for selection of dairy floor finishes
    IS 7957 : 1976 Basic method for the measurement of resonance frequency and equivalent series resistance of quartz crystal units IS 7957 : Part 1 : 2001 Measurement of Quartz Crystal Unit Parameters by Zero Phase Technique in A p-Network – Part 1 : Basic IS 7958 : 1976 Specification for Hand Vices
    IS 7959 : 1987 Specification for Polyethylene Containers for Foam Compounds
    IS 7960 : Part I : 1976 Code of Practice for Packaging Machine Tools – Part I : For Overseas Shipment
    IS 7962 : 1975 Methods of measurement for piezoelectric vibrations operating over the frequency range upto 30 MHz
    IS 7964 : 1992 Obstetric Instruments – Forceps, Caesarean section, haemostasis, Green-Armytage pattern – Shape and dimensions
    IS 7965 : 1976 Specification for Niobium (Columbium)
    IS 7966 : 1976 Specification for Dental Modelling Wax
    IS 7967 : 1976 Criteria for controlling pollution of marine coastal areas
    IS 7969 : 1975 Safety code for handling and storage of building materials
    IS 7970 : 1987 Specification for Tantalum Powder for Capacitors
    IS 7971 : 1987 Specification for Tourniquet, Cardiovascular Rumel-Belmont’s Pattern
    IS 7972 : 1987 Specification for Scissors, Dissecting, Metzenbaum’s Pattern
    IS 7973 : 1976 Code of practice for architectural and building working drawings
    IS 7974 : Part 1 : 1976 Graphical symbols for use on detailed maps, plans and geological cross sections:Part 1 General rules of IS 7974 : Part 2 : 1977 Graphical sysmbol for use on detailed maps, plans and geological cross sections Part 2 Representation IS 7974 : Part 3 : 1976 Graphical symbols for use on detailed maps, plans and geological cross sections: Part 3 Representation IS 7975 : Part I : 1976 Driving parts for hand-operated square drive socket wrenches:Part 1 Technical supply conditions
    IS 7975 : Part 2 : 1991 Driving Parts for Hand Operated Square Drive Socket Wrenches – Specification – Part 2 : Dimensions
    IS 7976 : 1976 Specification for Phorate, Technical
    IS 7978 : 1984 Specification for Portable Pneumatic Rivet Cutters
    IS 7979 : 1984 Specification for Portable Pneumatic Rivetting Hammers
    IS 7980 : 1976 Specification for Handle of skin Grafting Blade
    IS 7981 : Part I : 1976 Specification for Instruments, Tuboplasty – Part I : Occluder, Cervical, Shirodkar’s Pattern
    IS 7981 : Part II : 1976 Specification For Instruments. Tuboplasty – Part II : Cannula, Shirodkar’s Pattern
    IS 7981 : Part III : 1976 Specification for Instruments, Tuboplasty – Part III : Guide, Shirodkar’s Pattern
    IS 7981 : Part IV : 1976 Specification for Instruments, Tuboplasty – Part IV : Probe, Single Ended, Shirodkar’s Pattern
    IS 7981 : Part V : 1976 Specification for Instruments, Tuboplasty – Part V : Probe, Double-Ended, Shirodkar’s Pattern
    IS 7982 : 1992 Automobile Polish, Liquid – Specification
    IS 7983 : 1994 Toilet cleaner liquid – specification
    IS 7984 : 1991 Rubbing Compound – Specification
    IS 7986 : 1976 Code of practice for canal outlets
    IS 7988 : 1976 Referance tables for chromel-kopel thermocouples
    IS 7989 : 1976 Specification for Pliers for Internal Circlips
    IS 7990 : 1976 Specification for Pliers for External Circlips
    IS 7991 : 1991 Attachments for Hand Operated Square Drive Socket Wrenches – Specification
    IS 7992 : 1983 Specification for plywood cases for packing tobacco for export
    IS 7993 : 1988 Specification for Power Operated Square Drive Socket Wrenches (Impact)
    IS 7994 : 1976 Specification for Needle Holder, Barron’s Pattern
    IS 7995 : 1994 Pneumatic concrete breaker shanks – Dimensions
    IS 7996 : 1976 Specification for Driving Squares for Power Socket Wrenches
    IS 7997 : 1976 Guide for tasting products of intense flavour
    IS 7998 : 1986 Specification for Contact Breakers for Two Wheelers, Three Wheelers and Stationary Spark Ignition Engines
    IS 7999 : 1998 /ISO 5494 : 1978 Sensory Analysis – Apparatus – Tasting Glass for Liquid Products
    IS 8000 : Part 1 : 1985/ISO 1101 : 1983 Geometrical tolerancing on Technical Drawings Part 1 Tolerances of form orientation,
    IS 8000 : Part 2 : 1992/ISO 2692 : 1988 Technical drawings – Geometrical tolerancing Part 2 Maximum material principles
    IS 8000 : Part 3 : 1992/ISO 1660 : 1987 Technical drawings – Geometrical tolerancing Part 3 Dimensioning and tolerancing of profiles
    IS 8000 : Part IV : 1976 Geometrical tolerancing on technical drawings Part IV Practical examples of indications on drawings
    IS 8001 : 1976 Specification for Packaging of Plywood, Blockboards and Flush Doors for Export
    IS 8002 : 1976 Recommended procedure for welding of flexible PVC
    IS 8003 : 1976 Specification for Wheel Axle Assemblies for Mine Cars
    IS 8004 : 1976 Recommended procedure for welding of rigid PVC
    IS 8005 : 1976 Classification of unit loads
    IS 8006 : 1988 Recommendations for handling of timber pallets
    IS 8007 : 1976 Dimensions of fifth wheel coupling between transport tractors and semi/articulated trailers for interchangeability
    IS 8008 : Part I : 1976 Specification for Injection Moulded High Density Polyethylene (HDPE) Fittings for Potable Water Supplies IS 8008 : Part II : 1976 Specification for Injection Moulded High Density Polyethylene (HDPE) Fittings for Potable Water Supplies IS 8008 : Part 3 : 1976 Specification for injection moulded HDPE fittings for potable water supplies: Part 3 Specification for 90 degree IS 8008 : Part 4 : 1976 Specification for injection moulded HDPE fittings for potable water supplies: Part 4 Specific requirements IS 8008 : Part 5 : 1976 Specification for injection moulded HDPE fittings for potable water supplies: Part 5 Specific requirements IS 8008 : Part 6 : 1976 Specification for injection moulded HDPE fittings for potable water supplies: Part 6 Specific requirements IS 8008 : Part 7 : 1976 Specification for injection moulded HDPE fittings for potable water supplies: Part 7 Specific requirements IS 8009 : Part I : 1976 Code of Practice for Calculation of Settlements of Foundations – Part I : Shallow Foundations Subjected IS 8009 : Part II : 1980 Code of Practice for Calculation of Settlement of Foundations – Part II : Deep Foundations Subjected to IS 8010 : Part 1 : 1976 Guidelines for preparation of technical reports:Part 1 Research and development reports
    IS 8010 : Part 2 : 1982 Guidelines for preparation of technical reports:Part 2 Feasibility reports
    IS 8010 : Part 3 : 1987 Guidelines for preparation of technical reports:Part 3 Industrial potential survey reports
    IS 8011 : 1976 Methods for the measurement of frequency and equivalent resistance of unwanted reasonance of filter crystal units
    IS 8012 : 1976 Specification for Spring Dumb-bells
    IS 8013 : 1985 Specification for Performance Requirements and Testing of Marine Diesel Engines for Fishing Vessels
    IS 8014 : 1983 Classification and nomenclature of dyeing and finishing machinery
    IS 8015 : 1996 Hand trolley for oil drums
    IS 8016 : 1996 Hand Trolley for Gas Cylinders (Oxygen and Dissolved Acetylene) for Industrial Use – Specification
    IS 8017 : 1988 Vitreous enamelled reflectors for use with illuminating device
    IS 8018 : 1976 Platinum and platinum alloy wires for thermocouples elements
    IS 8019 : 1976 Specification for Dental Artificial Stone
    IS 8020 : 1976 Specification for Baseplate, Dental
    IS 8021 : 1975 Specification for Dental Sticky Wax
    IS 8022 : 1976 Specification for Acrylic Resin Teeth
    IS 8023 : 1991 Gauges – Single ended progressive type plate snap gauges (up to 160 mm) – Specification
    IS 8024 : 1976 Specification for Formothion Technical Solutions
    IS 8025 : 1990 Monocrotophos, Technical – Specification
    IS 8026 : 1987 Specification for Formothion EC
    IS 8027 : 1976 Specification for Propanil Emulsifiable concentrates
    IS 8028 : 1987 Specification for Quinalphos EC
    IS 8029 : 1985 Specification for Quinalphos Dusting Powders
    IS 8030 : 1976 Specification for Luminaires for Hospitals
    IS 8031 : 1976 Specification for Dissector, Watson Cheyne’s Pattern
    IS 8032 : 1976 Guide for Treatment of Distillery Effluents
    IS 8033 : 1976 Specification for Round Washers with Square Hole for Wood Fastenings
    IS 8034 : 2002 Submersible Pumpsets – Specification
    IS 8035 : 1999 Handpump – Shallow Well – Specification
    IS 8036 : 1976 Mild steel transformer cooling tubes
    IS 8037 : 1976 General Requirements for Transport Tractor-trailers
    IS 8038 : 1985 Method of testing corrosion resistance of metallic and other non organic coatings by corrodkote test
    IS 8039 : 1991 Handloom cotton mix saris – Specification
    IS 8040 : 1992 Surgical instruments – Artery, forceps,Kocher’s pattern – Shape and dimensions
    IS 8041 : 1990 Specification for rapid hardening Portland cement
    IS/ISO 8042 : 1988 Shock and Vibration Measurements – Characteristics to be Specified for Seismic Pick-ups
    IS 8042 : 1989 Specification for white Portland cement
    IS 8043 : 1991 Specification for hydrophobic Portland cement
    IS 8044 : 1976 Forceps, extraction, dental, lower molar, children
    IS 8045 : 1976 Specification for Forceps, Extraction, Dental, Lower Incisors and Canines, Children
    IS 8046 : 1976 Specification for Forceps, Extraction, Dental, Upper Incisors and Canines, Children
    IS 8047 : 1976 Specification for Forceps, Extraction, Dental, Upper Molar, Children
    IS 8048 : 1985 Electrocardiograph
    IS 8049 : 1988 Specification for Platform Trucks
    IS 8050 : 1976 Specification for Alpha Picoline
    IS 8051 : 1976 Steel ingots and billets for the production of volute, helical and laminated springs for automotive suspension
    IS 8052 : 1990 Steel ingots,billets and blooms for the production of volute and helical and laminated springs railway rolling stock IS 8053 : 1976 Specification for Steel Ingots and Billets for the Production of Steel Wire for the Manufacture of Wood Screws
    IS 8055 : 1976 Steel ingots and billets for the production of spring washers
    IS 8056 : 1976 Steel ingots and billets for the production of hard drawn steel wire for upholstry springs
    IS 8057 : 1976 Steel ingots and billets for the production of wire rod for the manufacture of machine screws : bart cold heading IS 8058 : 1976 Specification for Pyridine
    IS 8059 : 1993 2-Chloro-5-Aminotoluene-4-Sulphonic Acid, Technical – Specification
    IS 8060 : 1976 Specification for Heel-tip and Toe-tip with Nails for Footwear
    IS 8061 : 1976 Code of practice for design, installation and maintenance of service lines upto and including 650 V
    IS 8062 : Part 1 : 1976 Code of practice for cathodic protection of steel structures,Part 1 Genral Princples
    IS 8062 : Part II : 1976 Code of Practice for Cathodic Protection of Steel Structures – Part II : Underground Pipelines
    IS 8062 : Part 3 : 1977 Code of practice for cathodic protection of steel structure,part 3 Ship’s hull
    IS 8062 : Part 4 : 1979 Code of practice for cathodic protection of steel structures ,part 4 Galvanic protection of dockgates, caissons, IS 8063 : 1976 Specification for Red Lead for Explosive and Pyrotechnic Industry
    IS 8064 : 2002 Method of Designation of Mechanical and Hydraulic Presses
    IS 8066 : 1976 Specification for Mine Cars
    IS 8067 : 1986 Specification for Portable Pneumatic Impact Wrenches
    IS 8068 : 1976 Specification for Tab Washers
    IS 8069 : 1989 High density polyethylene (HDPE) woven sacks for packing pesticides [amalgamating IS 8069(Part 2):1981]
    IS 8070 : 1991 Screws – Slotted capstan (tommy bolts) – Specification
    IS 8071 : 1976 Specification for Propanil, Technical
    IS 8072 : 1984 Specification for Quinalphos, Technical
    IS 8073 : 1976 Guide for treatment and disposal of steel plant effluents
    IS 8074 : 1990 Monocrotophos Sl – Specification
    IS 8075 : 1976 Back coated carbon papers for typewriter
    IS 8076 : 2000 Frozen Cuttle Fish and Squid – Specification
    IS 8077 : 1976 Procedure for checking technique of quick frozen food
    IS 8078 : 1976 Specification for Table, Operation, Paediatric
    IS 8079 : 1976 Specification for Table, Operation, Urological
    IS 8080 : 1976 Specification for Silver Coated Copper Wire
    IS 8081 : 1976 Specification for slotted sections
    IS 8083 : 1976 Dimensions of ceramic dielectric capacitors of the plate type
    IS 8084 : 1976 Interconnecting busbars for ac voltage above 1 kV upto and including 36 kV
    IS 8085 : Part 1 : 1986 Methods of Test for Footwear – Part I : Dimensions, Fitting, Adhesion Test, Peel Test, Heat Resistance IS 8085 : Part 2 : 1999 Methods of Test for Footwear : Part 2 Footwear Performance Test, Stiffness Test for Shanks, Lastometer IS 8086 : 1991 Rehabilitation equipment – Wheelchairs, folding, junior size – Specification
    IS 8087 : 1976 Specification for Briefcases
    IS 8088 : 1976 Specification for Tricycle, Hand Propelled
    IS 8089 : 1976 Code of safe practice for layout of outside facilities in an industrial plant
    IS 8090 : 1976 Specification for Couplings, Branch Pipe, Nozzle Used in Hose Reel Tubing for Fire Fighting
    IS 8091 : 1976 Code of Safe Practice for Industrial Plant Layout
    IS 8092 : 1992 Code for Inspection of Surface Quality of Steel Castings for Valves, Fittings and Other Piping Components (Visual IS 8093 : 1976 Specification for Curette, Ballance’s pattern
    IS 8094 : 1976 Specification for Hook, Cerumen, Cawthorne’s Pattern
    IS 8095 : 1976 Specification for Accident Prevention Tags
    IS 8096 : 1992 Specification for fire beaters
    IS 8097 : 1976 Methods of chemical analysis of soft solders for jointing aluminium and aluminium alloys
    IS 8098 : Part 1 : 1976 Code of practice for finishing of automobile bodies Part 1 Finishing of passenger cars
    IS 8098 : Part 2 : 1981 Code of practice for finishing of automobile bodies Part 2 Refinishing of passenger cars
    IS 8099 : 1976 Sizes of collars for circular saw blades for woodworking machines
    IS 8100 : 1976 Water colours for students
    IS 8101 : 1976 Poster colours
    IS 8102 : 1990 Technical requirements for frozen semen of breeding bull
    IS 8103 : 1976 Code for cleaning and sterilization of artificial insemination equipment
    IS 8104 : 1996 /ISO 3513 : 1995 Chillies – Determination of Scoville Index
    IS 8105 : 1976 Method for sensory evaluation of pungency of black pepper by scoville heat units
    IS 8106 : 1976 Specification for Needle Holder, Eye, Kalt’s Pattern
    IS 8107 : 1993/ISO 7948 : 1987 Wood working machines – Routing machines – Nomenclature and acceptance conditions
    IS 8108 : Part 1 : 1984 Test code for grain dryers: Part 1 Selection and preparation for test
    IS 8108 : Part 2 : 1984 Test code for grain dryers: Part 2 Method of tests for continuous dryers
    IS 8108 : Part 3 : 1985 Test code for grain dryers: Part 3 Methods of tests for in-silo dryers
    IS 8109 : 1976 Specification for Needle Holder, Eye, Castroviejo’s Pattern
    IS 8110 : 2000 Well Screens and Slotted Pipes – Specification
    IS 8111 : 1986 Specification for N, N-Dimethylaniline
    IS 8112 : 1989 Specification for 43 grade ordinary Portland cement
    IS 8113 : 1976 Specification for Primary Cartons for Packaging Butter
    IS 8114 : 1984 Guidelines for machining dimensions of propeller hubs with keyway
    IS 8115 : 1976 Double hessian jute bags for pesticides
    IS 8116 : 1976 Specification for Moped Spokes and Nipples for Spokes
    IS 8117 : 1976 Specification for DW Tarpaulin Laminated Jute Bags for Pesticides
    IS 8118 : 1998 Automotive Vehicles – Opacity (Smoke) of Exhaust Gas from Vehicles Equipped with Compression Ignition Engines IS 8119 : 1976 Copper brazed steel tubing
    IS/ISO 8119-1 : 1989 Textile Machinery and Accessories – Needles for Knitting Machines – Terminology – Part 1 : Latch-type Needles
    IS/ISO 8119-2 : 1989 Textile Machinery and Accessories – Needles for Knitting Machines – Terminology – Part 2 : Bearded Needles
    IS/ISO 8119-3 : 1992 Textile Machinery and Accessories – Needles for Knitting Machines – Terminology – Part 3 : Compound Needles
    IS 8120 : 1989 Schaeffer’s Acid (Sodium Salt), Technical – Specification
    IS 8121 : 1987 Specification for Chromed Buff Calf Skin in Wet-blue Condition
    IS 8122 : Part 1 : 1994 Test Code for Combine Harvester-thresher – Part 1 : Terminology
    IS 8122 : Part 2 : 2000 Combine-Harvester-Thresher – Test Code – Part 2 : Performance Test
    IS 8123 : 1976 Code for hygienic conditions for sale of cut fruits, fruit juice and fruit salad
    IS 8124 : 1976 Code of Hygienic Conditions for Sale of Sugarcane Juice
    IS 8125 : 1976 Dimensions and Materials of Cement Rotary Kilns, Components and Auxiliaries (Dry Process With Suspension IS 8126 : 1993 Composite office tables
    IS 8127 : 1979 Specification for Guide Bushes for Press Tool Sets
    IS 8128 : 1976 Specification for Elevator, Farabeuf’s Pattern
    IS 8129 : 1976 Specification for Forceps, Tonsil Artery, Curved, Scott’s Pattern
    IS 8130 : 1984 Conductors for insulated electric cables and flexible cords
    IS 8131 : 1976 Test chart for circular tables for machine tools (table diameter up to 630 mm)
    IS 8132 : 1999 /ISO 3600 : 1996 Tractors and Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment – IS 8133 : 1983 Guidelines for location and operation of operator controls on agricultural tractors and machinery
    IS 8134 : 1996 Intermediate super abrasion furnace (ISAF) carbon black – Specification (second revision)
    IS 8135 : 1996 Fast extrusion furnace (FEF) carbon black – Specification (second revision)
    IS 8136 : 1976 Specification for Seeker, Dundas Grant’s Pattern
    IS 8137 : 1976 Specification for Springs for Plain Calico Looms
    IS 8138 : 1976 Specification for Picking Nose, Boss and Shell for Looms
    IS 8139 : 1976 Specification for Picking Cone and Bolt for Looms
    IS 8140 : 1976 Guide for Selection of Panel for Sensory Evaluation of Foods and Beverages
    IS 8141 : 1976 Tolerances for screw threads used in aeronautics
    IS 8142 : 1976 Method of test for determining setting time of concrete by penetration resistance
    IS 8143 : 1976 Plugs and keys for resistance boxes
    IS 8144 : 1997 Multipurpose dry batteries
    IS 8146 : 1976 Method of Measurement of Reverberation Time in Auditoria
    IS 8147 : 1976 Code of Practice for Use of Aluminium Alloys in Structures
    IS 8148 : 1976 Specification for Packaged Air Conditioners
    IS 8149 : 1994 Functional requirements for twin co2 fire extinguishers (trolley mounted)
    IS 8150 : 1997 Shipbuilding – 45 Litre Capacity Chemical Foam Type Fire Engine, for Marine Use – Specification
    IS 8151 : 1976 Single-speed three-phase induction motors for driving lifts
    IS 8152 : 1976 Method of Measurement of Speed Fluctuations in Sound Recording and Reproducing Equipment
    IS 8153 : 1986 Method for sensory evaluation of fresh fruits
    IS 8154 : 1993 Preformed calcium silicate insulation (for temperature upto 650° C)
    IS 8155 : 1976 Specification for Portfolios
    IS 8156 : 1994 Fasteners for consumer goods-synthetic hook and loop tape, specification
    IS 8157 : 1976 Specification for Forceps, Granulation, Heath’s Pattern
    IS 8158 : 1976 Specification for Needle, Eye, Discussion, Bowman’s Pattern
    IS 8159 : 1993 Scales and sizes for plotting frequency characteristics and polar diagrams
    IS 8160 : 1976 Tangent galvanometers
    IS 8161 : Part 1 : 1999 Guide for Equipment Reliability Testing – Part 1 : Principles and Procedures
    IS 8161 : Part 2 : 1986 Guide for equipment reliability testing: Part 2 Design of test cycles
    IS 8161 : Part 3 : Sec 1 : 1986 Guide for Equipment Reliability Testing – Part 3 : Preferred Test Conditions for Equipment Reliability IS 8161 : Part 3 : Sec 2 : 1986 Guide for Equipment Reliability Testing – Part 3 : Preferred Test Conditions for Equipment Reliability IS 8161 : Part 4 : 1985 Guide for equipment reliability testing: Part 4 Procedure for determining point estimates and confidence IS 8161 : Part 5 : 1981 Guide for equipment reliability testing: Part 5 Compliance test plans for success ratio
    IS 8161 : Part VI : Sec I : 1983 Guide for Equipment Reliability Testing – Part VI : Tests for Validity of a Constant Failure Rate Assumption
    IS 8161 : Part 6 : Sec 2 : 1987 Guide for equipment reliability testing: Part 6 Tests for validity of a constant failure rate assumption, IS 8161 : Part 7 : 1977 Guide for equipment reliability testing: Part 7 Compliance test plans for failure rate and mean time between IS 8161 : Part XI : 1983 Guide for Equipment Reliability Testing – Part XI : Flow Chart Describing Preparations for and Execution IS 8162 : 1998/ISO 5531 : 1978 Wheat flour – Method for determination of wet gluten
    IS 8163 : 1976 Specification for Knife, Keratome, Eye, Jaeger’s Pattern
    IS 8164 : 1976 Specification for Hospital Rubber Sheeting without Reinforcing Fabric
    IS 8165 : 1976 Test chart for manually operated dividing heads for machine tools
    IS 8166 : 1988 Specification for Rotary Drill Bits for Drilling Principally in Coal
    IS 8167 : 1989 Method for determination of reducibility index of iron ore oxides, lumps oore, sinter and pillets
    IS 8168 : 1976 Method for determination of available lysine in foods
    IS 8169 : 1997/ISO 6517 : 1992 Air cargo equipment – Base restrained certified containers exclusively for the lower deck of high IS 8170 : 1981 Guidelines for identification of finished leather for export
    IS 8171 : 1992 Glossary of terms relating to polishes and related materials
    IS 8172 : 1976 Specification for Vertical Steel Ladders
    IS 8173 : 1984 Specification for Propeller Shafts (with keyway) of Diameter 20 to 160 mm
    IS 8174 : 1994 Neurosurgical instruments – Forceps, artery, Dandy’s pattern – Shape and dimensions
    IS 8175 : 1994 Neurosurgical Instruments – Forceps, Artery, Straight and Curved on Flat, Hugh Cairn’s Pattern – Shape and Dimensions
    IS 8176 : 1976 Specification for Dissectors, Penfield’s Pattern
    IS 8177 : 1976 Specification for Pin Vices
    IS 8180 : 1992 Household Laundry Detergent Bars – Specification
    IS 8181 : 1976 Specification for Repositor, Iris
    IS 8182 : 1976 Code for hygienic conditions for processed meat products
    IS 8183 : 1993 Bonded mineral wool
    IS 8184 : 1976 Method for determination of ergot in foodgrains
    IS 8185 : 1976 Code of safety for phosgene
    IS 8186 : 1976 Marking codes for values and tolerance of resistors and capacitors (superseding IS 825:1956 and IS 4114:1967)
    IS 8187 : 1976 D-type fuses
    IS 8188 : 1999 Treatment of Water for Cooling Towers – Code of Practice
    IS 8189 : 1996 Rubber hose for on-shore oil suction and discharge services – Specification (first revision)
    IS 8190 : Part 1 : 1988 Requirements for Packing of Pesticides – Part 1 : Solid Pesticides
    IS 8190 : Part 2 : 1988 Requirement for packing of pesticides: Part 2 Liquid pesticides
    IS 8190 : Part 3 : 1979 Requirement for packing of pesticides: Part 3 Household pesticides
    IS 8190 : Part 4 : 1988 Requirement for packing of pesticides: Part 4 Fumigants
    IS 8191 : 1976 Specification for Retractor, Pillar, Anterior and Tonsil Enucleator, Mollison’s Pattern
    IS 8193 : 1976 Specification for 2-Nitro Chlorobenzene
    IS 8194 : 1976 Specification for 3-Nitro Chlorobenzene
    IS 8195 : 1976 Specification for 4-nitro Chlorobenzene
    IS 8196 : 1976 Specification for 2, 4-Dinitrotoluene
    IS 8197 : 1976 Terminal markings for electrical measuring instruments and their accessories
    IS 8198 : Part 1 : 1984 Code of practice for steel cylinders for compressed gases Part 1 Atmospheric gases
    IS 8198 : Part 2 : 1984 Code of practice for steel cylinders for compressed gases Part 2 Hydrogen gas
    IS 8198 : Part 3 : 1984 Code of practice for steel cylinders for compressed gases Part 3 High pressure liquefiable gases
    IS 8198 : Part 4 : 1984 Code of practice for steel cylinders for compressed gases:Part 4 Dissolved acetylene gas
    IS 8198 : Part 5 : 1984 Code of Practice for Steel Cylinders for Compressed Gases – Part 5 : Liquefied Petroleum Gas (LPG)
    IS 8198 : Part 6 : 1988 Code of practice for steel cylinders for compressed gases Part 6 Liquefied chlorine gas
    IS 8198 : Part 7 : 1988 Code of practice for steel cylinders for compressed gases Part 7 Ammonia gas
    IS 8198 : Part 8 : 1993 Code of practice for steel cylinders for compressed gases Part 8 Common organic refrigerant gases
    IS 8198 : Part 9 : 1988 Code of practice for steel cylinders for compressed gases Part 9 Sulphur dioxide gas
    IS 8198 : Part X : 1980 Code of Practice for Steel Cylinders for Compressed Gases – Part X : Methyl Bromide Gas
    IS 8198 : Part 11 : 1988 Code of practice for steel cylinders for compressed gases Part 11 Methyl chloride gas
    IS 8198 : Part 12 : 1982 Code of practice for steel cylinders for compressed gases Part 12 Gases for medical use
    IS 8199 : 1976 Specification for Tracheostomy Tubes, Fuller’s Pattern
    IS 8200 : 1976 Toggle switches used in traction application
    IS 8201 : 1976 Specification for High Frequency Wideband Matching Transformer
    IS 8202 : 1999 Carpenter’s Wooden Bodies Planes – Specification
    IS 8207 : 1976 Specification for Forceps, Rongeur, Dental
    IS 8208 : 1976 Sizes for cylinder bores and piston rod diameter for fluid power systems
    IS 8211 : 1976 Specification for Edible Soya Protein Isolate
    IS 8212 : 1976 Specification for Edible Groundnut Protein Isolate
    IS 8213 : 2000 Agricultural Tractor Trailer – Specification
    IS 8214 : Part 1 : 1976 Glossary of ships’ hydrodynamic terms, Part 1 Basic quantities
    IS 8214 : Part II : 1976 Glossary of Ships’ Hydrodynamic Terms – Part II : Ship Geometry
    IS 8214 : Part 3 : 1976 Glossary of ships’ hydrodynamic terms, Part 3 Resistance and propulsion
    IS 8214 : Part 4 : 1976 Glossary of ships’ hydrodynamic terms, Part 4 Sea keeping
    IS 8214 : Part 5 : 1976 Glossary of ships’ hydrodynamic terms, Part 5 Manoeuvrability
    IS 8214 : Part 6 : 1976 Glossary of ships’ hydrodynamic terms, Part 6 Strength and vibration
    IS 8215 : 1976 Glossary of Terms for Ships’ Propellers
    IS 8216 : 1976 Guide for inspection of lift wire ropes
    IS 8217 : 1976 Dimensions for pipe thread runouts and undercuts
    IS 8218 : Part 1 : 1976 Safety code for plant railways – Part 1 : Layout
    IS 8218 : Part 2 : 1982 Safety code for plant railways – Part 2 : Locomotives, wagons and their movements
    IS 8220 : 1976 Specification for Protein-rich Concentrated Nutrient Supplementary Foods
    IS 8221 : 1976 Code of practice for corrosion prevention of metals and metal components in packages
    IS 8222 : 1976 Specification for Edible Leaf Protein Concentrate
    IS 8223 : 1999 /IEC 72-2 : 1990 Dimensions and Output Series for Rotating Electrical Machines
    IS 8224 : 1976 Electric lighting fittings for division 2 areas
    IS 8225 : 1987/ISO 354 : 1985 Measurement of sound absorption in a reverberation room
    IS 8226 : 1976 Code of practice for installation and observation of base plates for measurement of foundation settlement in embankments
    IS 8227 : Part 1 : 1988 Specification for Fasteners, Arch and Clip for Files – Part 1 : Arch Fasteners
    IS 8227 : Part 2 : 1988 Specification for Fasteners, Arch and Clip for Files – Part 2 : Clip Fasteners
    IS 8228 : 1976 Specification for Bauxite Sand
    IS 8229 : 1986 Specification for Oil-well Cement
    IS 8231 : 1976 Specification for Clips, Paper, Spring Type
    IS 8232 : 1976 Specification for 2,6-Diaminoanthraquinone, Technical
    IS 8233 : 1987 Specification for Phenyl Peri Acid, Technical
    IS 8234 : 1976 Specification for Spools for Magnetic Tapes for Sound Recording and Reproduction
    IS 8236 : 1994 Slats for Cane Carriers – Specification
    IS 8237 : 1985 Code of Practice for Protection of Slope for Reservoir Embankment
    IS 8238 : 1976 Guide for use of variable capacitors in electronic equipment
    IS 8242 : 1976 Methods of tests for split bamboos
    IS 8243 : Part 1 : 1999 /ISO 1608-1 : 1993 Vapour Vacuum Pumps – Measurement of Performance Characteristics – Part 1 : Measurement IS 8243 : Part 2 : 1993/ISO 1608-2 : 1989 Vapour vacuum pumps – Methods of measurement of performance characteristics Part IS 8244 : 1976 Methods of calibration of vacuum gauges by direct comparison with reference gauge
    IS 8245 : 1976 Graphical symbols for vacuum technology
    IS 8246 : 1976 Liquid resins for use in shell process in foundries
    IS 8247 : 1976 Specification for Fastener, Paper, Prong Type, with Washer
    IS 8248 : 1976 Specification for Antireflection Coating on Glass Optical Components
    IS 8249 : 1994 Zinc sulphate heptahydrate, agricultural grade – Specification
    IS 8250 : 1988 Foundry parting agents
    IS 8251 : 1976 Specification for Commercial Cooking Ranges Including Grillers for Use with Liquefied Petroleum Gases
    IS 8252 : Part I : 1976 Environmental Tests for Aircraft Equipment – Part I : General
    IS 8252 : Part 2 : 1980 Environmental tests for aircraft equipment Part 2 Temperatures, pressure and humidity
    IS 8252 : Part 3 : 1978 Environmental tests for aircraft equipment Part 3 Humidity (24 hours cycle)
    IS 8252 : Part IV : 1980 Environmental Tests for Aircraft Equipment – Part IV : ICE Formation
    IS 8252 : Part VI : 1976 Environmental Tests for Aircraft Equipment – Part VI : Waterproofness
    IS 8252 : Part 8 : 1979 Environmental tests for aircraft equipment Part 8 Change of temperature
    IS 8252 : Part 10 : 1979 Environmental tests for aircraft equipment Part 10 Saltmist
    IS 8252 : Part 11 : 1976 Environmental tests for aircraft equipment Part 11 Differential pressure
    IS 8252 : Part 14 : 1982 Environmental tests for aircraft equipment Part 14 Mechanical vibration
    IS 8252 : Part 16 : 1979 Environmental tests for aircraft equipment Part 16 Shock
    IS 8252 : Part 18 : 1986 Environmental test for aircraft equipment, Part 18 Magnetic influence
    IS 8252 : Part 21 : 1986 Environmental test for aircraft equipment, Part 21 Explosion proofness
    IS 8253 : 1976 Specification for Lever, Bone, Bristow’s Pattern
    IS 8254 : Part I : 1976 Specification for Valve, Non-Rebreathing – Part I : Ruben’s Pattern
    IS 8254 : Part II : 1976 Specification for Value, Non-rebreathing – Part II : Ambu-hesse’s Pattern
    IS 8255 : 1976 Specification for Flexible Load Bearing Polyurethane Foam Components for Vehicles
    IS 8257 : 1976 Specification for Ophthalmoscope
    IS 8258 : 1976 Specification for Oxydemeton-Methyl Technical Concentrate
    IS 8259 : 1976 Specification for Oxydemeton-Methyl Emulsifiable Concentrates
    IS 8260 : Part 1 : 1976 Glossary of terms relating to ophthalmic lenses and spectacle frames Part 1 Ophthalmic lenses
    IS 8260 : Part 2 : 1976 Glossary of terms relating to ophthalmic lenses and spectacle frames Part 2 Spectacle frames
    IS 8261 : Part I : 1976 Specification for Pins and Wires, Skeletal, Traction – Part I : Kirschner Wires
    IS 8261 : Part II : 1976 Specification for Pins and Wires, Skeletal, Traction – Part II : Guide Wires
    IS 8261 : Part III : 1976 Specification for Pins and Wires, Skeletal, Traction – Part III : Pins and Wires, Fixation and Threaded
    IS 8261 : Part 4 : 1998/ISO 5838-1 : 1995 Pins and wires skeletal traction Part 4: Material and mechanical requirements
    IS 8262 : Part 1 : 1976 Quick release couplings for vacuum pipe lines Part 1 Screwed type
    IS 8262 : Part 2 : 1976 Quick release couplings for vacuum pipe lines Part 2 Clamped type
    IS 8263 : 1976 Methods for radio interference test on high voltage insulators
    IS 8265 : 1996 Agricultural tractors – Guards for power take-off (PTO) drive-shafts
    IS 8266 : 1976 Specification for Expansion Shell Type Roof Bolts
    IS 8267 : 1976 Specification for Dalapon-sodium, Technical
    IS 8268 : 2001 Rhizobium Inoculants – Specification
    IS 8269 : 1976 Methods for switching impulse tests on high voltage insulators
    IS 8270 : Part 1 : 1976 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 1 Definitions and classification
    IS 8270 : Part 2 : 1976 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 2 Item designation
    IS 8270 : Part 3 : 1977 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 3 General requirements IS 8270 : Part 4 : 1977 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 4 Circuit diagrams
    IS 8270 : Part 5 : 1976 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 5 Interconnection diagrams IS 8270 : Part 6 : 1983 Guide for preparation of diagrams, charts and tables for electrotechnology: Part 6 Unit wiring diagrams IS 8271 : Part 1 : 1981 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part I : General Requirements IS 8271 : Part II : Sec 1 : 1981 Specification for Quartz Crystal Units Used in Oscillators – Part II : Series AA – Section 1 : Quartz IS 8271 : Part 2 : Sec 2 : 1981 Specification for Quartz Crystal Units Used in Oscillators- Part 2 : Series AA – Section 2 : Quartz IS 8271 : Part 2 : Sec 3 : 1981 Specification for Quartz Crystal Units Used in Oscillators – Part 2 : Series AA – Section 3 : Quartz IS 8271 : Part 2 : Sec 4 : 1981 Specification for Quartz Crystal Units Used in Oscillators – Part 2 : Series AA – Section 4 : Quartz IS 8271 : Part 2 : Sec 5 : 1981 Specification for Quartz Crystal Units Used in Oscillators – Part 2 : Series AA – Section 5 : Quartz IS 8271 : Part 2 : Sec 6 : 1981 Specification for Quartz Crystal Units used in Oscillators – Part 2 : Series AA – Section 6 : Quartz IS 8271 : Part 2 : Sec 7 : 1982 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 8 : 1982 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 9 : 1982 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 10 : 1984 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 11 : 1984 Specification for artz Crystal Units Used for Frequency Control and Selection – Part 2 : Series AA IS 8271 : Part 2 : Sec 12 : 1984 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 13 : 1984 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 14 : 1984 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 15 : 1985 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 16 : 1985 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 17 : 1985 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 18 : 1985 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 19 : 1985 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 20 : 1985 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 21 : 1985 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 2 : Sec 22 : 1985 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 2 : Series IS 8271 : Part 3 : Sec 1 : 1982 Specification, for Quartz Crystal Units Used for Frequency Control and Selection – Part 3 : Series IS 8271 : Part 3 : Sec 2 : 1982 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 3 : Series, IS 8271 : Part 3 : Sec 3 : 1982 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 3 : Series IS 8271 : Part 3 : Sec 4 : 1982 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 3 : Series IS 8271 : Part 3 : Sec 5 : 1982 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 3 : Series IS 8271 : Part 3 : Sec 6 : 1982 Specification for Quartz Crystal Units Used in Oscillators – Part 3 : Series BC – Section 6 : Quartz IS 8271 : Part 3 : Sec 7 : 1982 Specification for Quartz Crystal Units Used in Oscillators – Part 3 : Series BC – Section 7: Quartz S 8271 : Part III : Sec 8 : 1982 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part III : Series IS 8271 : Part 3 : Sec 9 : 1982 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 3 : Series IS 8271 : Part 4 : Sec 1 : 1983 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 4 : Series IS 8271 : Part 4 : Sec 2 : 1983 Specification FOR Quartz Crystal Units Used for Frequency Control and Selection – Part 4 : Series IS 8271 : Part 4 : Sec 3 : 1984 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 4 : Series IS 8271 : Part 4 : Sec 4 : 1984 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 4 : Series IS 8271 : Part 5 : Sec 1 : 1986 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 5 : Series IS 8271 : Part 5 : Sec 2 : 1986 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 5 : Series
    IS 8271 : Part 5 : Sec 3 : 1986 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 5 : Series IS 8271 : Part 5 : Sec 4 : 1986 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 5 : Series IS 8271 : Part 5 : Sec 5 : 1986 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 5 : Series IS 8271 : Part 5 : Sec 6 : 1988 Specification for Quartz Crystal Units Used for Frequency Control and Selection – Part 5 : Series IS 8271 : Part 5 : Sec 7 : 1989 Specification for Quartz Crystal Units Used for Frequency Control – Part 5 : Series CX for Oscillators IS 8271 : Part 5 : Sec 8 : 1989 Quartz Crystal Units Used for Frequency Control and Selection – Specification – Part 5 : Series CX IS 8271 : Part 5 : Sec 9 : 1989 Quartz crystal units used for frequency control and selection: Part 5 Series CX for Oscillators, Sec IS 8271 : Part 5 : Sec 10 : 1989 Quartz Crystal Units Used for Frequency Control and Selection – Specification – Part 5 : Series IS 8271 : Part 5 : Sec 11 : 1990 Quartz Crystal Units Used for Frequency Control and Selection – Specification – Part 5 : Series IS 8271 : Part 5 : Sec 12 : 1990 Quartz Crystal Units Used for Frequency Control and Selection – Specification – Part 5 : Series IS 8271 : Part 5 : Sec 13 : 1990 Quartz Crystal Units Used for Frequency Control and Selection – Specification – Part 5 : Series IS 8271 : Part 5 : Sec 14 : 1990 Quartz Crystal Units Used for Frequency Control and Selection – Specification – Part 5 : Series IS 8271 : Part 5 : Sec 15 : 1990 Quartz Crystal Units Used for Frequency Control and Selection – Specification – Part 5 : Series IS 8271 : Part 5 : Sec 16 : 1990 Quartz Crystal Units Used for Frequency Control and Selection – Specification – Part 5 : Series IS 8271 : Part 5 : Sec 17 : 1990 Quartz Crystal Units Used for Frequency Control and Selection – Specification – Part 5 : Series IS 8271 : Part 6 : Sec 1 : 1986 Quartz crystal units used for frequency control and selection: Part 6 Series BF for Oscillators, Section IS 8271 : Part 6 : Sec 2 : 1986 Quartz crystal units used for frequency control and selection: Part 6 Series BF for Oscillators, Section IS 8271 : Part 6 : Sec 3 : 1988 Quartz crystal units used for frequency control and selection: Part 6 Series BF for Oscillators, Section IS 8271 : Part 6 : Sec 4 : 1988 Quartz crystal units used for frequency control and selection: Part 6 Series BF for Oscillators, Sec IS 8271 : Part 6 : Sec 5 : 1991 Quartz crystal units used for frequency control and selection: Part 6 Series BF for Oscillators, Sec IS 8271 : Part 6 : Sec 6 : 1991 Quartz crystal units used for frequency control and selection: Part 6 Series BF for Oscillators, Sec IS 8272 : 1984 Specification for gypsum plaster for use in the manufacture of fibrous plaster boards
    IS 8274 : 1976 Specification for Drawbar Eyes and Forecarriage Pins for Connection between Trailers of Gross Mass above 5 IS 8275 : 1976 Specification for Binocular Eyepieces for Microscope
    IS 8276 : Part 1 : 1976 Methods for calibration of vacuum gauges:Part 1 Pressure reduction by continuous flow in the pressure IS 8277 : 1976 Water based recorder inks
    IS 8278 : 1976 Specification for Diphenylamine
    IS 8279 : 1976 Hectographic carbon paper
    IS 8280 : 1976 Methods of calibration of ionization vacuum gauges
    IS 8281 : 1976 Hydroxylamine sulphate, photographic grade
    IS 8282 : Part 1 : 1976 Code of practice for installation, maintenance and observation of pore pressure measuring devices in concrete IS 8282 : Part 2 : 1996 Installation, Maintenance and Observations of Pore Pressure Measuring Devices in Concrete and Masonry IS 8283 : 1976 Specification for Tweezers, Soldering
    IS 8284 : 1976 Specification for Pusher, Band, Dental, Mershon’s Pattern
    IS 8286 : 1976 Specification for Dalapon-sodium Salt Water Soluble Powders
    IS 8287 : 1986 Specification for Pliers, Band Stretching and Contouring, Parrot Beak, Dental
    IS 8288 : 1976 Specification for Bakeable Flanges
    IS 8289 : 1976 Electrical equipment with type of protection ‘n’
    IS 8290 : 1976 Specification for General Purpose Audio Frequency Output Power Meters
    IS 8291 : 1976 Specification for Phenthoate Emulsifiable Concentrates
    IS 8292 : 1992 Method of test for evaluation of working quality of timber under different wood working operations
    IS 8293 : 1976 Specification for Phenthoate, Technical
    IS 8294 : 1976 Specification for Liquid Amine Salts of MCPA
    IS 8295 : Part 1 : 1976 Specification for bamboo chicks: Part 1 Fine
    IS 8295 : Part 2 : 1976 Specification for bamboo chicks: Part 2 Coarse
    IS 8296 : 1976 Specification for Towing Jaw for Use Between Trailers of Up to 35 Tonnes Gross Mass and Transport Tractor
    IS 8297 : 1976 Specification for Towing Jaw for use Between Trailers of Up to 16 Tonnes Gross Mass and Transport Tractor
    IS 8298 : 1976 Specification for Towing Jaw for Use Between Trailers of Up to 5 Tonnes Gross Mass and Transport Tractor
    IS 8299 : 1976 Specification for Towing Hook for use Between Trailers of Up to 16 Tonnes Gross Mass and Transport Tractor
    IS 8300 : 1976 Towing hook for use between trailers of up to 35 tonnes gross mass and transport tractor
    IS 8302 : 1977 Specification for Braided Tape for Berets
    IS 8304 : 1977 Specification for Wooden Winding Rollers for Textile Finishing Machines
    IS 8305 : 1976 Specification for Twist Drills, Morse Taper Shank, Long Series
    IS 8306 : 1976 Specification for Carbide Tipped Twist Drills, Morse Taper Shank
    IS 8307 : 1976 Specification for Carbide Tipped, Twist Drills, Parallel Shank
    IS 8308 : 1993 Compression type tubular in-line connectors for aluminium conductors of insulated cables
    IS 8309 : 1993 Compression type tubular terminal ends for aluminium conductors of insulated cables
    IS 8310 : 1977 Guide for standard book numbering (SBN)
    IS 8311 : 1976 Specification for Instrument Jewels
    IS 8312 : 1977 Specification for Forceps, Introducing, Endotracheal Tube, Magill’s Pattern
    IS 8313 : 1977 Specification for Cannula, Flexible, Karman Type
    IS 8314 : 1977 Specification for Forceps, Midwifery, Modified Kedarnath Das’ Pattern, without Axis Traction
    IS 8315 : 1977 Specification for Forceps, Redressing, Asch’s Pattern
    IS 8316 : 1977 Specification for Retractor, Hajek’s Pattern
    IS 8317 : 1991 Cardiovascular Surgery Instruments – Clamps, Vascular, Angled at 45 – Shape and Dimensions
    IS 8318 : 1977 Colour identification markings for air purifying canisters and cartridges
    IS 8320 : 2000 General Requirements and Methods of Tests for Lead-acid Storage Batteries
    IS 8322 : 1976 Guide for drafting of performance specifications for cores of transformers and inductors for telecommunication
    IS 8323 : 1977 Specification for Palm Oil
    IS 8324 : 1988 Code of Practice for Safe use and Maintenance on Non-calibrated Round Steel Link Lifting Chains and Chin Slings
    IS 8325 : 1983 Nickel formate for nickel catalyst
    IS 8326 : 1977 Specification for Starter, Smith Peterson Nail, Orthopedic
    IS 8327 : 1977 Specification for Forceps, Nodule, Vocal, Chevalier Jackson’s Pattern
    IS 8328 : 1977 Free cutting copper bars, rods and sections
    IS 8329 : 2000 Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewage – Specification
    IS 8330 : 1986 Specification for Tripods for Surveying Instruments
    IS 8331 : 1993 Textiles – Angola shirting – Specification
    IS 8332 : 1977 Specification for Handle, Saw, Gigli
    IS 8334 : 1977 Specification for Rongeur, Cranial, Dahlgren’s Pattern
    IS 8335 : 1991 Cardiovascular Surgery Instruments – Clamps, Auricle, Satinsky Pattern – Sizes, Shape and Dimensions
    IS 8336 : 1977 Specification for Thermoelectric Pyranometer
    IS 8337 : 1976 Performance requirements of compression joints of aluminium conductors in insulated cables
    IS 8338 : 1976 Recommendations relating to primary elements in the design of school library buildings
    IS 8339 : 1993 Automotive vehicles – Reflex reflectors – Specifiction
    IS 8340 : 1977 Specification for Needle, Aneurism, Syme’s Pattern
    IS 8341 : 1977 Specification for Retractor, Goitre, Joll’s Pattern
    IS 8342 : 1977 Specification for Forceps, Midwifery, Modified Kedarnath Das’s Pattern, with Axis Traction
    IS 8343 : 1977 Specification for Forceps, Biopsy, Peterson’s Pattern
    IS 8344 : 1977 Specification for Snare, Aural, Glegg’s Pattern
    IS 8345 : 1994 Cardiovascular surgery instruments – Clamps, bulldog, cross action type – Specification
    IS 8346 : 2003/ISO 7493 : 1997 Dental, Operating, Stool
    IS 8347 : 1977 Glossary of Terms Relating to Respiratory Protective Devices
    IS 8348 : 1977 Code of practice for stacking and packing of stone slabs for transportation
    IS 8349 : 1977 Deviations for untoleranced dimensions of malleable iron castings
    IS 8350 : 1977 Deviations for untoleranced dimensions of spheroidal or nodular graphite iron castings
    IS 8351 : 1977 Specification for Spiral Pins (Heavy Duty Type)
    IS 8352 : 1977 Specification for Flat Countersunk Square Neck Bolts
    IS 8353 : 1977 Specification for Flat Countersunk Nib Bolts
    IS 8354 : 1977 Code of practice for packaging of electric fans
    IS 8355 : 1977 Code of practice for packaging of sewing machine for household purposes
    IS 8356 : 1993 Titanium Dioxide, Food Grade – Specification
    IS 8357 : 1977 Method for assessment of fabric drape
    IS 8359 : 1993 Urea Ammonium Phosphate Based Fertilizers – Specification
    IS 8360 : Part 1 : 1977 Specification for fabricated high density polyethylene (HDPE) fittings for potable water supplies: Part 1 General
    IS 8360 : Part 2 : 1977 Specification for fabricated high density polyethylene (MDPE) fittings for potable water supplies, Part 2 Specific IS 8360 : Part 3 : 1977 Specification for fabricated high density polyethylene (HDPE) fittings for potable water supplies, Part 3 Specifc IS 8361 E : 1977 Specification for Palmolein
    IS 8362 : 1977 Copper and copper alloy rolled plates for condensers and heat exchangers
    IS 8363 : 1976 Bare wire electrodes for electroslag welding of steels
    IS 8364 : 1989 Free cutting brass wire
    IS 8365 : 1991 Copper alloys for spot and seam resistance welding electrodes
    IS 8366 : 1989 Activated carbons, powdered
    IS 8367 : 1993 Tin powder
    IS 8368 : 1985 Tungsten carbide powder for hardmetals
    IS 8369 : 1985 Titanium carbide powder for hardmetals
    IS 8370 : 1977 Iron powder for powder metallurgical aplications
    IS 8372 : 1977 Specification for Retractor, Alae, Kilner’s Pattern
    IS 8373 : Part 1 : 1991 Specification for steel launches Part 1 Single hull passenger ferry launches
    IS 8374 : 1977 Specification for Bitumen Mastic, Anti-Static and Electrically Conducting Grade
    IS 8375 : 1977 Method for checking continuity of anodized coatings
    IS 8376 : 1988 Specification for Electroplated Coatings of Nickel Plus Chromium on Plastics for Decorative Purposes
    IS 8377 : 1977 Specification for Bougie, Lister’s and Clutton’s Patterns
    IS 8378 : 1987 Vocabulary for basic and general terms in dimensional metrology
    IS 8379 : 1977 Specification for Spiral Pins (Medium Duty Type)
    IS 8380 : 1977 Specification for Rongeur, Double-Action, Olivecrona’s Pattern
    IS 8381 : 1977 Recommended practice for quarrying stones for construction purposes
    IS 8382 : 1977 Specification for Pressure Regulators, Pre-set Used with Medical Gas Cylinders
    IS 8383 : 2000 Hydraulic Fluid Power – Filter Elements – Verification of Fabrication Integrity and Determination of the First Bubble IS 8384 : 1977 Method of test for collapse/burst resistance of oil hydraulic filter elements
    IS 8385 : 1977 Method of Test for Material Compatibility of Oil Hydraulic Filter Elements
    IS 8386 : 1977 Method of test for end-load rating of oil hydraulic filter elements
    IS 8387 : 1977 Method of test for wool fibre length (Barbe and Hauteur) using a comb sorter
    IS 8388 : 1977 Code of Safety for Nitrobenzene
    IS 8389 : 2003 Installation and Use of Raingauges, Recording – Code of Practice
    IS 8390 : 1977 Specification for are Combs
    IS 8391 : 1987 Specification for Rubberized Coil Sheets for Cushioning
    IS 8392 : 1985 Tungsten powder for hardmetals
    IS 8393 : 1977 Specification for Roll Seal Pilferproof Closures
    IS 8394 : 1977 Soldering and welding type terminal ends for conductors of insulated cables
    IS 8395 : Part I : 1977 Specification for Cable Terminations for Automobile Wiring – Part I : Blade Type Connectors (Male and Female)
    IS 8395 : Part II : 1977 Specification for Cable Terminations for Automobile Wiring – Part II : Bullet and Tube Type Connectors
    IS 8396 : 1977 Specification for air cargo base sandwich panel
    IS 8397 : 1976 Specification for 2-nitrotoluene
    IS 8398 : 1976 Specification for 3-nitrotoluene
    IS 8399 : 1976 Specification for 1, 3-dinitrobenzene
    IS 8400 : 1976 Specification for 2, 4-dinitro Chlorobenzene
    IS 8401 : 1994 Alkyl Benzene Sulphonic Acid (Acid Slurry) – Specification
    IS 8402 : 1987 Methods of Sampling and Test for Pressure Sensitive Adhesive Tapes
    IS 8404 : Part I : 1977 Specification for Fixed Playground Equipment for Schools – Part I : General Requirements
    IS 8404 : Part II : 1979 Specification for Fixed Playground Equipment for Schools – Part II : Climbing Ropes
    IS 8405 : 1976 Specification for Circular Thread Rolling Dies
    IS 8406 : 1993 Specification for gear lubricants for enclosed industrial gear drives
    IS 8407 : 1977 Test chart for gear hobbing machines, standard precision (vertical axis)
    IS 8408 : 1994 Planning and design of groynes in alluvial river – Guidelines
    IS 8409 : 1991 Cardiovascular Surgery Instruments – Dilator, Valve, Tubb’s Mitral Pattern – Specification
    IS 8411 : 1977 Specification for Foot Tyre Inflator for Road Vehicles
    IS 8412 : 1977 Specification for Slotted Countersunk Head Bolts for Steel Structures
    IS 8413 : Part 1 : 1977 Requirements for biological treatment equipment: Part 1 Trickling filters
    IS 8413 : Part 2 : 1982 Requirements for biological treatment end equipment: Part 2 Activated sludge procss and its modifications
    IS 8414 : 1977 Guidelines for design of under-seepage control measures for earth and rockfill dams
    IS 8415 : 1977 Mounting dimensions of head lights for automobiles
    IS 8416 : 1977 Mounting Dimensions of Fog Lights for Automobiles
    IS 8417 : 1977 Glossary of lubrication terms
    IS 8418 : 1999 Specification for Horizontal Centrifugal Self-Priming Pumps
    IS 8419 : Part 1 : 1977 Requirements for filtration equipment : Part 1 Filtration media – sand and gravel
    IS 8419 : Part 2 : 1984 Requirements for rapid sand gravity filtration equipment: Part 2 Under drainage system
    IS 8420 : 2000 Grain Dryers – Glossary of Terms
    IS 8421 : 1977 Specification for Hydraulic Props
    IS 8422 : Part I : 1977 Specification for Piston Rings for IC Engines – Part I : Plain Compression Rings from 30 up to 200 mm Nominal IS 8422 : Part II : 1977 Specification for Piston Rings for ic Engines – Part II : Taper Faced Compression Rings from 30 up to 200 IS 8422 : Part III : 1977 Specification for Piston Rings for ic Engines – Part III : Keystone Rings from 82 up to 200 mm Nominal IS 8422 : Part 4 : 1977 Piston rings for IC engines: Part 4 Napier oil scraper rings from 30 up to 200 mm nominal diameter N-Rings
    IS 8422 : Part 5 : 1977 Piston rings for IC engines: Part 5 Stepped oil scraper rings from 30 up to 200 mm nominal diameter Z-IS 8422 : Part 6 : 1977 Piston rings for IC engines: Part 6 Slotted oil control rings from 50 up to 200 mm nominal diameter S-Rings
    IS 8422 : Part 7 : 1977 Piston rings for IC engines: Part 7 Double bevelled slotted oil control rings from 50 up to 200 mm nominal IS 8422 : Part 8 : 1977 Piston rings for IC engines: Part 8 Narrow land slotted oil control rings form 50 up to 200 mm nominal diameter IS 8422 : Part 9 : 1986 Piston rings for IC engines: Part 9 Terms and definitions
    IS 8423 : 1994 Specification for controlled percolating hose for fire fighting
    IS 8424 : 1977 Specification for Gag, Mouth, Lane’s Pattern
    IS 8425 : 1977 Code of practice for determination of specific surface area of powders by air permeability method
    IS 8426 : 2001 Measuring Methods for Properties of Gyromagnetic Materials Intended for Application at Microwave Frequencies
    IS 8426 : Part 1 : 1977 Methods of measurements for properties of gyromagnetic materials for use at microwave frequencies: Part IS 8426 : Part 2 : 1977 Methods of measurements for properties of gyromagnetic materials for use at microwave frequencies: Part IS 8426 : Part 3 : 1977 Methods of measurements for properties of gyromagnetic materials for use at microwave frequencies: Part IS 8427 : 1989 Agricultural Produce Milling Machinery – Rubber Roll for Paddy Dehusker – Specification
    IS 8428 : 1977 Grading for KARANJA seeds for oil milling
    IS 8429 : 1988 Rayon satin lining cloth for berets – Specification
    IS 8430 : 1977 Specification for Nylon Fabrics for Inflatable Equipment
    IS 8431 : 1986 Specification for Tracing Paper
    IS 8432 : 1977 Specification for Tubes, Tracheotomy (rubber or plastics)
    IS 8433 : 1984 Code of practice for visual inspection of dissolved acetylene gas cylinders
    IS 8434 : 1977 Airconditioning requirements on boardships
    IS 8435 : 1977 Methods for measurement of thickness of metallic coatings on plastics
    IS 8436 : 1989 Thermal Cycling Test for Evaluation of Electroplated Plastics – Method
    IS 8437 : Part 1 : 1993/IEC 479-1 : 1984 Guide on effects of current passing through human body: Part 1 General aspects
    IS 8437 : Part 2 : 1993/IEC PUB 479-2 : 1987 Guide on effects of current passing through human body: Part 2 Special aspects
    IS 8438 : 1987 Moulds of cast resin based straight through joints for cables for voltages upto and including 1100 V
    IS 8439 : 1977 Methods for sampling of lead and lead alloys
    IS 8440 : 1977 Test code for paddy cleaners
    IS 8442 : 1977 Functional requirements for stand post type water monitor for fire fighting
    IS 8443 : 1977 Grading for tobacco seeds for oil milling
    IS 8444 : 1977 Specification for Fumigant Strips for Treatment of Honey-Bees
    IS 8445 : 1991 Pesticide – Carbendazim (MBC), Technical – Specification
    IS 8446 : 1991 Pesticide – Carbendazim (MBC) WP – Specification
    IS 8447 : 1989 Manually operated voltage regulators for domestic use
    IS 8448 : 1989 Automatic Line Voltage Correctors (Step Type) for Domestic Use – Specification
    IS 8449 : 1999 Non-returnable metal aerosol dispensers
    IS 8450 : 1977 Ships’ steel dog step ladders
    IS 8451 %

    Leave a Reply